To enable automatic login, I edited the /etc/gdm/custom.conf file and entereted the following lines:
Code:
The automatic login is working but I still see the login box with options to select language. After a delay of few seconds, the system will automatically log me in. I don't know why I see the login window. Is there any way to bypass this window?
I have tried editing
Code:
/etc/gdm/custom.conf
by adding
[code]...
How to enable automatic DHCP on Fedora15, in network settings, i chose method Automatic DHCP on IPv4 settings and in proxy settings , i chose method as automatic. However, it is not working.
View 1 Replies View Relatedis it possible to set up a user account for automatic login on fedora 11, and if so, how is it done?
View 3 Replies View RelatedI made my Fedora 13 box boot up automatically by adding the following to /etc/gdm/custom.conf
Code:
However, when it boots up it prompts me for my password so it can connect to my wireless network (I think it said something about not getting my user password at login). Is there anyway I can get it to remember this?
I would like to make this automatic because this will be a remote box that I will use as a file server, but it wont be turned on all the time. So I'll turn it on when I need it, but I'll need to connect to it remotely, so obviously it needs to be on the network.
I want a automatic login in my system with fedora 15 LXDE Spin. I followed the steps given in this thread but it doesn't work. There is no login screen option in administration also. What should I do?
View 4 Replies View RelatedI'm trying to use automatic login with sudo like this:
But in both case I'm getting the same error:
My linux version:
My sudo version:
My terminal settings:
I have a windows 7 ultimate host machine, installed oracle virtual box on it. Made a iso image to boot fr fedora. All this is fine when the installation is complete, it asks for reboot. Reboot done. Then I went to terminal. Did a SU - root to get into the root. Then I did a firstboot command to enter information. I created a user for myself and at the end rebooted the virtual box.
When it starts up, it does not show my user. It just shows "Automatic Login" and it logs in as Live System User. Even if I try to switch user then it gave me a authentication failure when I enter the credentials of the user which I created. If I try to create users manually using system administration, the user is lost after reboot. I have tried all possible steps...as instructed on the net.
I have just a one line script that runs telnet, and even thoughI've looked around I thought maybe someone could just tell me if there is a way to automatically login to the telnet server without having to type it in everytime. It's more of a hassle type of thing, but no matter what I've tried, I can't get anything to work.
View 5 Replies View RelatedWhat I'd like to have is alsa mixer enable microphone on plug-in and mute it on plug-out.
It's because when enabled it produces unwanted noise in the speakers, so I have to manually turn it off once I'm done with using skype and turn on again when I get a call. I'd like to automate that process.
i installed FC 13 the version was kde and i installed gnome using yum, edit /etc/pam.d/gdm and /etc/pam.d/gdm-password
View 2 Replies View RelatedI have updated from 10.2 to 11.1. When 11.1 starts I get into the CLI rather than an automatic startup of KDE. I can login at the CLI, then type "startx" to start KDE. I know there is someway to automatically start KDE when the computer boots, but just can't seem to find it. Can someone point me in the right direction? With 10.2 I was able to automatically load KDE as myself as user and would like to have that again in 11.1.
View 6 Replies View RelatedIs there any way o enable root login for Gnome in Fedora 14 ?
View 6 Replies View RelatedMy question is simple, is it possible to enable and disable automatic sleep/hibernate/standby using BASH? I need it for a bash script.Been searching for a while now, can't seem to find it.
View 2 Replies View RelatedAfter checking "enable desktop effects" in KDE. I'm dropped to login screen and can't login. How can I enable desktop effects? (As a solution to not being able login after checking the box I found that deleting kwinrc in .kde/share/config/ should help and it worked, so this is not a problem).
Fedora 14 2.6.35.10-68.fc14.x86_64
$ lspci | grep -i vga
01:00.0 VGA compatible controller: ATI Technologies Inc Broadway XT [Mobility Radeon HD 5800 Series]
I don't know if it's related but I also when on login screen I can't console login - after warning I see black screen and nothing more.
I am unable to login to kde after upgrade to fc14 from fc13 as user , the splash screen works for seconds and returns back to login screen, but I am able to do as root
I also managed to login to KDE (failsafe session)
and also I am able to login as normal user to gnome desktop
I'm already aware that you can set automatic login for gdm, which is what i currently have now.
Unfortunately, for some bizarre reason, it doesn't work 100% of the time. I'd say for about every 10 successful auto-logins, I get a case where it just sits at the log-in screen. This is a problem for me because i use it for a specific purpose, and i need Ubuntu to come up as fast as possible, without any user interaction.
So far my only workaround has been to reboot it whenever it does a bad start (where it asks me to log-in) and usually when the PC reboots, it will auto login fine.
I've given up trying to find out why it does that, so i just want the log-in screen gone entirely. I've searched on google and on this site directly, but no one else seems to have this issue.
Can't set automatic login in lxde.Where is that option to do it?
View 7 Replies View RelatedMy laptop running Ubuntu 10.04 insists on automatically logging me in without asking for my password. The only thing is, I've disabled auto login and it shouldn't be doing that.
When I first boot up Ubuntu all I have to do is select my username, no password required to log in. I want the login screen to prompt me for my password for better security.
Here are the settings I already have:
System - Administration - Login screenSet to "show the screen for choosing who will log in"
System - Administration - Users and GroupsI am the only user I have an Administrator level account "Don't ask for password on login" is unchecked, i.e. it should ask for my password on login. If I create a new user with the same settings, that user gets asked for its password. But I don't.
Surely this should be enough to disable automatic login.
I have enabled automatic login in Lubuntu, and have now added a second user, I want to DISABLE the automatic login, or perhaps change the default login. The usual Ubuntu admin window for this does not appear to be available. Where in the conf files this setting is, and or whether there is a GUI that controls this.
View 9 Replies View Relatedrecently installed Ubuntu Server 10 everything has set up just fine but the only problem i have is to get ubuntu to login automatically. The main reason for this is because i havent got a monitor connected if for whatever reason the server restarts its hanging at the login screen and i cant login via vnc to the desktop. The furthest ive got is for it to say at the login screen next to the name (user logged in). Any Ideas on how to resolve this? or if it is possible?
View 2 Replies View RelatedI have installed CentOS 5.5 successfully and I have VNC working. This server will be a headless box that will reside in a server rack. I intend to perform any necessary maintenance on the machine remotely though my desktop computer. My problem is that when CentOS is on the login screen, I cannot connect with VNC. Once I have logged into a user account, then I can connect.
I would like the server to automatically login to one of my users each time it boots so that the VNC connection will be opened. Currently I have two users, root and Zachary. I would like the server to automatically login to the user Zachary.
In the CentOS Gnome GUI, when I go into System > Administration > Login Screen, and then click on the Security tab there is an option to "Enable Automatic Login." If you check this box a select form field becomes active; however, there are no user accounts showing in that select field. I tried typing in the user name that I wanted to automatically login, but after closing the screen it clears that username. What am I missing?
How to enable automatic logon to the desktop Debian after turning on the computer?
View 2 Replies View RelatedWhen I create a new user account and login the first time to Gnome a series of files and directories is created in the user's home directory. Those directories are for example:
.ICEauthority
.cache
.config
.dbus
.gnupg
Bilder
Desktop
Documents
Musik
Videos
Vorlagen
�ffentlich
How can I control what files and directories are created? I checked /etc/skel but none of those entries where there. In particular, I do not want to have the folders "Bilder", "Documents", "Musik", "Videos", "Vorlagen" and "�ffentlich" being created.
I have a machine I have already installed 11.3 on. How do I set it so it has a automatic login for a specific user into the KDE desktop? I looked in YAST but didn't see anything obvious to enable that behavior.
View 1 Replies View Relatedall the sudden i have to start typing in the nm keyring password and subsequently all my website logins
View 1 Replies View RelatedI want to connect to anothere server from my current server through SSH command.
when I am using the command in the terminal like-- ssh username@ip it is asking me to give password. This is working fine in the terminal. but I want to do it automatic through a shell script.
How can I be able to provide userid and password through shell script?
I was trying to achieve it by creating a public key and copy it to the destination .ssh file. but I dont have the permission to create any file in the destination server.
I'm creating my custom distro in SuseStudio, but I want to automatic login, but it says is is not supported in SLE10. But it has a scripts tab..Is it possible to create a script that creates automatic login
View 4 Replies View RelatedI have a cluster of 50 machines and some machines already have ssh automatic login setup but I want to be able to check this with a script.
View 1 Replies View RelatedI'm looking for an solution to get an automatic authentication and login to my FON hotspot. I did some search on this but I can't find an solution on this. Is there a way to get it work? I'm running on Ubuntu 10.04.
View 3 Replies View Related
