Fedora Installation :: F13 User Lost After Creation - Automatic Login
Sep 28, 2010
I have a windows 7 ultimate host machine, installed oracle virtual box on it. Made a iso image to boot fr fedora. All this is fine when the installation is complete, it asks for reboot. Reboot done. Then I went to terminal. Did a SU - root to get into the root. Then I did a firstboot command to enter information. I created a user for myself and at the end rebooted the virtual box.
When it starts up, it does not show my user. It just shows "Automatic Login" and it logs in as Live System User. Even if I try to switch user then it gave me a authentication failure when I enter the credentials of the user which I created. If I try to create users manually using system administration, the user is lost after reboot. I have tried all possible steps...as instructed on the net.
View 1 Replies
ADVERTISEMENT
Jan 17, 2010
When I create a new user account and login the first time to Gnome a series of files and directories is created in the user's home directory. Those directories are for example:
.ICEauthority
.cache
.config
.dbus
.gnupg
Bilder
Desktop
Documents
Musik
Videos
Vorlagen
�ffentlich
How can I control what files and directories are created? I checked /etc/skel but none of those entries where there. In particular, I do not want to have the folders "Bilder", "Documents", "Musik", "Videos", "Vorlagen" and "�ffentlich" being created.
View 8 Replies
View Related
Jun 13, 2009
is it possible to set up a user account for automatic login on fedora 11, and if so, how is it done?
View 3 Replies
View Related
Nov 17, 2010
I've been running 10.04 since September on my new MSi i3 notebook and about two weeks ago I noticed that when I login after system boot, propagation of icons on my desktop and the content of my Panel have become slower and slower.If I logout and login again the propagations are not slow.
View 1 Replies
View Related
Jun 3, 2011
yesterday I updated my fedora 13 to fedora 14 (on laptop) and today i cannot log in on user. It just go blank for a sec and is back to login.
At text console (alt+ctr+f2/f3) i enter my username and pass it give this for a sec and resets (clean) console
username: Name
password:
last used: [date]
login: no shell permission denied
i used unetbootin (fedora 14 netinstall to update) and later i updated 1,5G before reboot (did update that fix, forgot its name tho :s)
I would most likely reinstall everything, but i have some work at laptop and as death-line is near, i would prefer to fix it if possible.
edited:
i have installed F13 on unused space, is there a way for me to access and fix it? or at least get some files from there?
View 1 Replies
View Related
May 28, 2011
I started from a Fedora 14 installation with user specific desktop setting, i.e. background, menu items, and so on.The upgade worked fine, but while loggin on I found a new environment (Gnome 3) an no user specific desktop settings.How can I upgrade from F14 to F15 without losing my desktop settings and without insatlling Gnome 3?
View 3 Replies
View Related
Jan 31, 2011
I was lurking about my hidden files and noticed the ".thumbnails" directory. I had been browsing the web for about an hour and had opened some image files from my drive.HOLY CRAP! I had over 2000 thumbnails in that directory! Every time an image is displayed, a thumbnail of it is created? Really? Seriously, I don't care what the reason behind this "feature" is, how do I stop it? It is simply unnecessary and a waste of disk space.
View 9 Replies
View Related
Jan 14, 2011
I'm a big fan of the NSLU2-Linux project so I've been doing some developments for this platform for the last three years. In order for the end users to test my applications, I initially created an USB image with everything bundled into it. Then, they only had to download the image and decompress (dd) it into an USB pendrive with capacity equal or greater than 4 GB. The fact is that this has brought me lots of problems in the practice since my Web server hardly accepts long file transfers.
Moreover, flash spaces beyond 4GB are wasted. As result, I'm now considering a different approach as I don't know how to do it. Well, I've thought that I could maybe create an USB disk image only with the root file system partition. Then, the first time a script runs, it creates a home partition and formats it into the rest of the space available in the pendrive. There is maybe some command-line alternative to fdisk without having the user to interact during the format process... ??
View 3 Replies
View Related
Jul 21, 2009
This is my 6th install of Fedora, begining with Fedora 4 I have had very good luck with all until 9 and I lost all data on drive by my bad clicks in a frustrated session. Now I have a great install of Fedora 10 with the exception that I fouled up and typed in a user (myself-'andybill') and am finding out that the work I need to do cannot be maximized by operating in user - andybill, I need to be super user. I have just moved and have not done any collaboration with our senior partner in a data development start up that he is the intellectual property in deed and law. For me to get back on track my using this OS I have to be master of all libraries, drivers etc. I am a nu-b (only 2 1/2 years, with no computer science background. This explains why I need step by step commands without abbriviated lingo-So if I can remove myself as andybill, make all root
View 13 Replies
View Related
Jan 9, 2011
when a new email arrives on my gmail account, i want to be labelled (=tagged), letting an external bash script read the message and choose the right label.
i.e.:
from: ebay
to: me
dear matteo, congratulations! BILL_GATES has just bought one of your items! regards, mr. ebay i can easily write a script to calculate the right label (BILL_GATES) but how can i create it (if not already existing) and apply it to the processed message?
it took me 2 minutes to find a guide on how to configure mutt to view my gmail account, but i can't go any further... mutt has a kind of patch or extension to manage labels (view, edit, apply, etc), but i can't figure out how i could make it an automatic procedure... fetchmail + procmail seems to be the best solution, but (before spending a night with any effort)
View 1 Replies
View Related
Nov 23, 2009
To enable automatic login, I edited the /etc/gdm/custom.conf file and entereted the following lines:
Code:
The automatic login is working but I still see the login box with options to select language. After a delay of few seconds, the system will automatically log me in. I don't know why I see the login window. Is there any way to bypass this window?
View 3 Replies
View Related
Jun 8, 2011
So, I logged into my laptop this morning and tried to run a VirtualBox VM and it barked that I had not setup the kernel module yet. I found this odd since I was running it fine yesterday... so I was poking around my system and noticed that there was a yum update yesterday
Code:
Jun 07 14:03:21 Updated: 1:gdm-3.0.4-1.fc15.x86_64
Jun 07 14:03:22 Updated: 1:gdm-plugin-fingerprint-3.0.4-1.fc15.x86_64
Jun 07 14:03:35 Installed: kernel-debug-devel-2.6.38.7-30.fc15.x86_64
Jun 07 14:03:37 Updated: kernel-headers-2.6.38.7-30.fc15.x86_64
[Code]......
View 9 Replies
View Related
Jun 19, 2010
I made my Fedora 13 box boot up automatically by adding the following to /etc/gdm/custom.conf
Code:
However, when it boots up it prompts me for my password so it can connect to my wireless network (I think it said something about not getting my user password at login). Is there anyway I can get it to remember this?
I would like to make this automatic because this will be a remote box that I will use as a file server, but it wont be turned on all the time. So I'll turn it on when I need it, but I'll need to connect to it remotely, so obviously it needs to be on the network.
View 4 Replies
View Related
Jul 13, 2011
I want a automatic login in my system with fedora 15 LXDE Spin. I followed the steps given in this thread but it doesn't work. There is no login screen option in administration also. What should I do?
View 4 Replies
View Related
Apr 3, 2011
I'm trying to use automatic login with sudo like this:
But in both case I'm getting the same error:
My linux version:
My sudo version:
My terminal settings:
View 2 Replies
View Related
Mar 23, 2009
Previously I have a hard disk running OpenSUSE partitioned as follows:
Code:
/dev/sda1 = swap
/dev/sda2 = /
/dev/sda3 = /home
I redid the default partitioning scheme that Fedora tries to use (no LVM crap). Basically told it to make the above layout and to format swap and slash, but NOT to format /home because I want that data. I had it go ahead and install grub on the MBR of this HD as well. The install seems to have went ok and it rebooted. That is when the first problem comes up. I never see grub. I just get a black screen then a bar at the bottom that progressively turns blue, which I assume is Fedora loading.
This is all well and good, then it gets to the login screen (GDM) and I try to log in as root and it tells me "can't authenticate user" hangs for a bit, then goes back to the log in box. I try to get a virtual console (Ctrl+Alt+F#) and nothing. So I guess I have 3 problems in order of significance:
- Why no grub?
- Why no virtual console?
- Why root can't log in?
Normally I would edit kernel option line at the grub prompt to boot into single user mode and fix the problem, but can't. I was able to use the "rescue mode" on the Fedora DVD to accomplish this, but have not had a chance to figure things out any further. I don't think having a /home created by another OS would prevent root from logging in since root "home dir" is /root.
View 1 Replies
View Related
Jul 23, 2009
Fresh install of Fedora 11 x86_64, ext4 file system, Intel Quad, 1 Tb disk
Went through install, defined mike as user with password
reboot, get graphic login (init 5); cannot login as mike OR AS ROOT!! (unable to authenticate)
use live cd, reset inittab to start at level 3
reboot, get user prompt on terminal at level 3
enter mike and password, system wait a minute or more, returns to login prompt (obviously timing out --- dbus problem???)
enter root and password, get in, issue startx
open terminal window, and issue "su mike" command, ten minutes later, finally get terminal with mike as user.
Use ctrl-alt-F2 to get a terminal, type mike, and password, no joy; login as root and type "su mike". Go back to Gnome screen at F7, so I can continue to type this , and check back at F2 periodically to see if "su mike" ever takes. After three minutes, still no joy. After five minutes, it worked. whoami shows "mike"
View 6 Replies
View Related
Mar 29, 2010
If I'm getting good at anything with Fedora, it would be making mistakes. I have Fedora 12 installed and it was running fine until I attempted to set the path in bashrc and cshrc for jdk. Now I am unable to login using the only user account I created at install. When I enter my password the login screens goes blank then my mouse pointer appears with the circling dashed loading symbol for a few secs and then brings me back to the login screen asking for my password again.
View 4 Replies
View Related
Nov 7, 2010
I have tried editing
Code:
/etc/gdm/custom.conf
by adding
[code]...
View 14 Replies
View Related
May 27, 2011
However, the option to upgrade to 11.04 has recently become available in the Update Manager.
If I choose to follow this upgrade path, will my existing user settings such as nautilus shortcuts, wallpaper and other personalised settings be changed or reverted to default in any way?
Or will the upgrade execute, and leave everything looking and working exactly the same?
View 1 Replies
View Related
Dec 20, 2010
I am unable to login to kde after upgrade to fc14 from fc13 as user , the splash screen works for seconds and returns back to login screen, but I am able to do as root
I also managed to login to KDE (failsafe session)
and also I am able to login as normal user to gnome desktop
View 5 Replies
View Related
Jan 19, 2011
I have just a one line script that runs telnet, and even thoughI've looked around I thought maybe someone could just tell me if there is a way to automatically login to the telnet server without having to type it in everytime. It's more of a hassle type of thing, but no matter what I've tried, I can't get anything to work.
View 5 Replies
View Related
Feb 1, 2010
I have logged on as chris; sudo su to get root access. I have done:
apt-get update
apt-get upgrade
my previous versions of ubuntu have been removed from the grub menu.I can not now log on as chris and sudo su to root from ssh. It says I am missing from sudoers file.Is there an easy way to fix as I can not access the master screen and will have to talk my wife through the changes required.
View 1 Replies
View Related
Nov 19, 2010
I have lost my password and user name for my installation of Fedora 8, i do not need to get it running again as i am preparing the pc for sale but i have several gigs of photos on there and i would like to rescue them if possible, i thought i might be able to do it with a live cd and copy the files on to a usb stick but wanted to ask firsts i am a real amateur ie i never managed to understand how every thing works really.It is in duel boot with win xp sp3 and i could not get to the photos from there
View 1 Replies
View Related
Nov 14, 2010
the OEM account was created when I just installed Maverick (10.10) and now I've changed the password on that account and want to create a daily user account, cannot locate where I can do that.I want to learn Linux badly but am completely in the dark beginner right now.
View 4 Replies
View Related
Jun 18, 2009
I installed Fedora on IBM desktop PC with 40 GB. During installation I only created Boot and swap partitions and remain 30 GB as free space and now I want to create partitions from 30 GB free of Harddisk and I do in Windows XP and use Administration TOOL and create an other partition. so How I can create partitions on fedora after completed installation of Fedora Desktop. Need steps of post harddisk partition tool in Fedora.
View 5 Replies
View Related
Sep 10, 2010
After running a large update and rebooting a few weeks ago, I found that my internet connection had stopped working. My internal network still worked fine though, so it I know it's not the card itself or its configuration. After a bit of trial and error I discovered that simply running dhclient brings the connection up again, so it appears that something is interfering with the initial dhcp update to my ISP (or something like that; I'm no expert in this area. ) My usual policy in cases like this is to wait through two or three updates in the hopes that it's just a temporary problem, but it's been a while now and subsequent updates haven't fixed it.
I've tried looking around, but I can't come up with search criteria specific enough to narrow it down to my specific situation. I'm not even sure where to begin looking to diagnose the problem, nor do I know which package update(s) could've affected it. I'm not sure what might be useful, but here's the relevant entry in /etc/network/interfaces. I have it configured with a static internal address, with my router as the gateway.
Code:
# The primary network interface
mapping eth0
script grep
map eth0
[code].....
View 7 Replies
View Related
Feb 3, 2011
I need to create a user with least permission on the production server. He should only be able to read or execute the files that to be specific. For example: I just need to give him a set of commands to run.Besides those command execution He should be prevented to run any other command and He should not able to create any files(write permission).
How would i proceed about this.
View 1 Replies
View Related
Dec 8, 2010
It has worked in the last week or so. Not sure when I ran it last. Now only root can run Open Office. The menu and a quick start Icon both give no response but su can call from the command line. I,user, can't. Seems there was a big OO update in the last several days, this might be the cause. I spoke too soon. Now su will not get it either. I tried su -l and su with no success. Also an Icon for OO quick start has gone away.
View 2 Replies
View Related
Jan 17, 2010
The author (somewhere on these Ubuntu forums directed........ Ctrl + Alt + F1 which I thought was going to be the "Terminal" but nothing similar. I have about a half dozen different names/passwords for Ubuntu but none will work to log in. How to get out of this text console and back to Ubuntu GUI? And, how to read my lost LogIn name and password for this "Text Console"?
View 2 Replies
View Related
