I have just a one line script that runs telnet, and even thoughI've looked around I thought maybe someone could just tell me if there is a way to automatically login to the telnet server without having to type it in everytime. It's more of a hassle type of thing, but no matter what I've tried, I can't get anything to work.
View 5 RepliesHow to enable automatic DHCP on Fedora15, in network settings, i chose method Automatic DHCP on IPv4 settings and in proxy settings , i chose method as automatic. However, it is not working.
View 1 Replies View RelatedTo enable automatic login, I edited the /etc/gdm/custom.conf file and entereted the following lines:
Code:
The automatic login is working but I still see the login box with options to select language. After a delay of few seconds, the system will automatically log me in. I don't know why I see the login window. Is there any way to bypass this window?
is it possible to set up a user account for automatic login on fedora 11, and if so, how is it done?
View 3 Replies View RelatedI made my Fedora 13 box boot up automatically by adding the following to /etc/gdm/custom.conf
Code:
However, when it boots up it prompts me for my password so it can connect to my wireless network (I think it said something about not getting my user password at login). Is there anyway I can get it to remember this?
I would like to make this automatic because this will be a remote box that I will use as a file server, but it wont be turned on all the time. So I'll turn it on when I need it, but I'll need to connect to it remotely, so obviously it needs to be on the network.
I want a automatic login in my system with fedora 15 LXDE Spin. I followed the steps given in this thread but it doesn't work. There is no login screen option in administration also. What should I do?
View 4 Replies View RelatedI'm trying to use automatic login with sudo like this:
But in both case I'm getting the same error:
My linux version:
My sudo version:
My terminal settings:
I have tried editing
Code:
/etc/gdm/custom.conf
by adding
[code]...
I have a windows 7 ultimate host machine, installed oracle virtual box on it. Made a iso image to boot fr fedora. All this is fine when the installation is complete, it asks for reboot. Reboot done. Then I went to terminal. Did a SU - root to get into the root. Then I did a firstboot command to enter information. I created a user for myself and at the end rebooted the virtual box.
When it starts up, it does not show my user. It just shows "Automatic Login" and it logs in as Live System User. Even if I try to switch user then it gave me a authentication failure when I enter the credentials of the user which I created. If I try to create users manually using system administration, the user is lost after reboot. I have tried all possible steps...as instructed on the net.
I am trying to execute an awk script which is called by a shell script. The result is that it always responds with << ^ invalid char ' ' in expression >>
As I do not have command line access, I use a php script as go-around.
On the command line,
Code:
awk --version
gives the following output:
Code:
Command: awk --version
GNU Awk 3.1.3
[Code].....
On my ubuntu 9.10 pc i am not running a GUI.
Every thing is run from command line.
How do i start a second telnet session from command line.
Plus can i have 4 telnet session open and move from one to the next and back again.
I have a cron job that runs a shell script. But it only runs the first line of that shell script and not the rest of the file. I'm a little stumped as to why. If I run the shell script manually, it runs and executes every single line as it should. I think I must need some additional syntax to make this run correctly?
Here is the crontab ...
Code:
root@kchlinux:~/macs# crontab -l
# m h dom mon dow command
[code]....
I was just checking the configuration file of /etc/xinetd.d/krb5-telnet and i thought of enabling the telnet.I modified the configuration file accordingly and restarted the server.
Code:
# cat /etc/xinetd.d/krb5-telnet
# default: off
[code]...
How can I enable telnet login in a slackware derivative? (specifically Backtrack 3)Needing telnet because I'm unable to get ssh login working through a reverse ssh tunnel.
View 3 Replies View RelatedI am trying to implement a corba program (client) to retrieve customerinformation from the server. Since the server allow to login once andperform your operations until the lifetime experies, i want the client to use already login connection to perform the retrieve function withoutlogin in to the server for every request.Suppose retrieve has three functions, logon(), perform() and logoff()Pseudo code;Quote:
1. User runs a client application
./retrieve <URI> <customerID>
2. if the client program has already login, donot login, go to 4
[code]....
I want to run a command every time I log in to my Ubuntu box, but only if I'm connecting through telnet, not if I'm logging in at the console.
View 1 Replies View Relatedtelnet localhost 143Trying 127.0.0.1...Connected to localhost.localdomain (127.0.0.1).
Escape character is '^]'.* OK [CAPABILITY IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA IDLE ACL ACL2=UNION STARTTLS] Courier-IMAP ready. Copyright 1998-2005 Double Precision, Inc. See COPYING for distribution information.a login rakesh@sanjiv.com rakesha NO Login failed.i have problem when Installing Courier-imap/imaps with Courierpassd .
a user called, cannot login - forgot the password - common case ( 200 user system )- but this one seems to be a bit different:
user tries to log in via ssh - login/passwd incorrect,
via telnet - no problem
tried a few different users on ssh - no problem... It seems the access denied applies to just a single, standard user account - only via ssh, all other users are able to login... tried also to change the passwd, no difference. beside re-creating the account, can you think about anything else? system: RHEL AS3, 2.4.21-51ELsmp
I have two servers running Linux 2.6.9 kernel.When i telnet to server1 , the telnet will be disconnected only after 3 login failures. While, when i telnet to server2, telnet will be disconnected after the first login failure.expect server2 to behave the same way as server1 when telnet is executed.Kindly tell me where i should tweak my servers so that i could achieve what i expect.
View 1 Replies View RelatedHave you anyone knows/uses some automatic downloader with automatic captcha recognition system for most popular sites like rapidshare, hotfile, megaupload and so on. I need possibility to run it from command line as I have headless system.
View 1 Replies View RelatedI'm trying to access a login page that runs xbap.
[URL]
Doesn't seem to work in Ubuntu - it just downloads the file instead of taking me to a login page. It's not a browser problem as I have the latest version of Firefox, which works fine under Windows XP.
If I only want to let a user be able to login via telnet a max number of times equal to 2 how would I go about doing this?I have found this little tid bit:per_source = 2but that only allows 2 connections from the same source (i.e. network) and that would not work. For some reason our telnet sessions are not dying off after a user has shutdown their PC and then the next time they login it adds another telnet session.
1. user1 31300 /dev/pts/409
2. user1 27539 /dev/pts/539
3. user1 18042 /dev/pts/316
[code]....
Few day back I have installed fedora 15 in my system with gnome desktop environment. when i was using fedora 11 I used to login via command line by changing the /etc/inittab from run level 5 to run level 3 . once if i login when ever i need GUI, simply i will type startx command , but when i tried to change the runlevel in fedora 15 , It was confusing to me , there is no 1,2,3 is there . how can i change to command mode login in fedora 15..?
View 1 Replies View RelatedI have Fedora 14 with minimal installation (without graphical interface and so on) and the application I've been working needs to be initialized on boot up. So, I need to disable the login prompt (and password) by command line. How can I do it? I've seen by GUI, but with command line nothing...
View 2 Replies View RelatedI'm already aware that you can set automatic login for gdm, which is what i currently have now.
Unfortunately, for some bizarre reason, it doesn't work 100% of the time. I'd say for about every 10 successful auto-logins, I get a case where it just sits at the log-in screen. This is a problem for me because i use it for a specific purpose, and i need Ubuntu to come up as fast as possible, without any user interaction.
So far my only workaround has been to reboot it whenever it does a bad start (where it asks me to log-in) and usually when the PC reboots, it will auto login fine.
I've given up trying to find out why it does that, so i just want the log-in screen gone entirely. I've searched on google and on this site directly, but no one else seems to have this issue.
Next week we will get a new Server for rent with a preinstalled Debian. If we download the Networkinstaller and put it in Grub, it is possible to set some settings with a script or commandline? We need SSH and the Network haves to run. So we have to set up the Networkadress , Gateway and Netmasq. So if the Networkinstaller is booting that we get direcly access with SSH to install CentOS. It is possible?
View 1 Replies View RelatedCan't set automatic login in lxde.Where is that option to do it?
View 7 Replies View RelatedMy laptop running Ubuntu 10.04 insists on automatically logging me in without asking for my password. The only thing is, I've disabled auto login and it shouldn't be doing that.
When I first boot up Ubuntu all I have to do is select my username, no password required to log in. I want the login screen to prompt me for my password for better security.
Here are the settings I already have:
System - Administration - Login screenSet to "show the screen for choosing who will log in"
System - Administration - Users and GroupsI am the only user I have an Administrator level account "Don't ask for password on login" is unchecked, i.e. it should ask for my password on login. If I create a new user with the same settings, that user gets asked for its password. But I don't.
Surely this should be enough to disable automatic login.
I have enabled automatic login in Lubuntu, and have now added a second user, I want to DISABLE the automatic login, or perhaps change the default login. The usual Ubuntu admin window for this does not appear to be available. Where in the conf files this setting is, and or whether there is a GUI that controls this.
View 9 Replies View Relatedrecently installed Ubuntu Server 10 everything has set up just fine but the only problem i have is to get ubuntu to login automatically. The main reason for this is because i havent got a monitor connected if for whatever reason the server restarts its hanging at the login screen and i cant login via vnc to the desktop. The furthest ive got is for it to say at the login screen next to the name (user logged in). Any Ideas on how to resolve this? or if it is possible?
View 2 Replies View Related