I have just installed a new hard drive with Fedora 14.
How can I edit it when my kernel version is 2.6.35.12-88.fc14.i686.PAE?
I want to dualboot with Windows XP?
Here's what I tried:
It didn't work? What did I type wrong?
since i have installed the nvidia drivers i have lost the graphical boot and just had a bar at the bottom of the screen instead. i tried to get the graphical screen back by adding vga=795 to my /boot/grub/grub.conf but when i rebooted not only did i not get the graphical boot or the toolbar at bottom.
i got list of all the drivers and services it is starting with ok next to it. i have also since doing this lost the bit when restarting or shutting down getting the words restarting or shutting down and just get blank screen with flashing cursor. i removed the vga=795 and i still get the list of drivers/services loading.
how do i get the quiet option back. i have checked /boot/grub/grub.conf and it has the quiet in it.i have also tried running update-grub but get message command not found. i have attached the grub.conf file
I would like to modify the boot loader settings and triedo open the file grub.confHowever, it is said that the file could not be opened, as seen in the attachment.Tried to authenticate as 'root' before opening the file, but the problem still exist...
View 10 Replies View RelatedI've installed Fedora 10 on the third partition of an external HDD. It has with the following partitions:
(hd0,0) - GRUB bootloader files [PRIMARY]
(hd0,1) - Chainload LILO for another Linux [PRIMARY]
(hd0,2) - Fedora 10, no LVM or Swap (labeled F10) [PRIMARY]
I'm trying to boot Fedora 10 using the following grub.conf:
[Code]....
What is the configuration issue in the other-than-Fedora-11 stanza below that prevents that OS from booting? That stanza is taken directly from the /boot/grub/menu.lst of that OS, whose root partition is on sda5. All I get upon choosing the menu entry is a blinking cursor and a steady HD light. obsessing over this for a couple of weeks, reading what I can find about grub configuration but without joy.
Here is /boot/grub/grub.conf:
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You do not have a /boot partition. This means that
# all kernel and initrd paths are relative to /, eg.
[Code]......
The latest update changed the default boot from 0 to 1 and added extra parameters to the new kernel boot line.
default=1
timeout=8
splashimage=(hd0,7)/boot/grub/splash.xpm.gz
# hiddenmenu
title Fedora (2.6.31.6-145.fc12.x86_64)
root (hd0,7)
[Code]...
After a kernel upgrade on my linux, my grub.conf become empty. How can I auto generate grub.conf file? I don't want to do it from scratch.
View 3 Replies View RelatedI have windows vista on one sata HDD, and fedora on a second sata HDD. After installing fedora of course the grub is auto booting fedora. I would like vista to be the default O/S. I dont care if i modify the grub file to have it manually boot vista, or to remove the grub interface all together, i just want it to auto boot vista. My bios is programed to boot my vista drive before my fedora drive, however it keeps booting the grub and it boots fedora, which i find kind of odd. below is the contents of my grub.conf file:
[Code]....
*NOTE: i have already tried changing the 'default=0' to 'default=1' and restarting the computer, as i saw in a different post on these forums, however that did not fix my problem. Im guessing its because i have the operating systems on two seperate drives, where the other guy just had them on a single drive.
**EDIT: after posting i had to modify lines 6 and 10 of my grub.conf file because it had smileys at the end lol. i put a space in between the 8 and the ) for posting purposes only, my actuall file does not have these spaces.
I have just completed a clean install of Fedora 14 on a new disc (/dev/sdc)My old system disc (/dev/sda, an LVM 'vg_phenom00') is still installed.I note that my /etc/fstab has entries for the swap space on both disks;
Code:
# /etc/fstab
# Created by anaconda on Mon Jan 3 09:00:29 2011
[code]....
sda win xp
sdb Fedora 14
There is a problem (I can see) with F14 install.
In the past the grub was installed during install (since Fedora 6).
Now choosing an install disk "sdb" (install target
drive) requests a drive to be chosen for
bootloader, but if the alternate drive sda is
chosen (this case the XP drive), it is formatted.
I have gone though install many times to see what I missed.
This once worked beautifully. What did I miss?
I now have XP and Fedora 14 installed but I cannot reach Fedora 14.
I had to do a fixmbr to get to XP
Since I cannot reach F14, I cannot get to grub2 and have to use .97
I just tried setting my vga mode in grub.conf so that I can have my boot splash back after disabling nouveau. Works great. Problem is, now, that after doing this my touchpad is disabled. Anyone else run into this? I'm on an HP dv6, FC13, vga=0x37b. I remove vga mode setting and touchpad works again.
View 1 Replies View RelatedI'm trying to set up some shares on this pc and every time I try to edit the /etc/exports file I get this error. I get the same error when I try to edit /boot/grub.conf file or any other files. Does not matter what editor I use. I'm running f14.
View 3 Replies View RelatedI am testing my crash recovery strategy for my linux system and I am having trouble with GRUB. I am basically restoring my backup (i.e. tar) unto a different hard drive, but I am having problems getting the machine to boot without me having to type the GRUB commands at the GRUB prompt that is presented when the machine boots up off the new hard drive. I have tried to restore the MBR in two ways (the 2nd one is the one that gets me to the GRUB prompt):
1. Get the MBR off the original drive and write it unto the new drive (all via dd), but that did not work at all: the machine hangs right away during boot up. It seems to hang right at the point where the BIOS tries to read the MBR.
Code:
On original drive:
# dd if=/dev/sda of=mbr+part.bin bs=512 count=1
On new drive (new drive is now in place of original drive):
# dd if=mbr+part.bin of=/dev/sda bs=1 count=446 conv=notrunc
2. By using the FEDORA rescue CD, I installed grub unto the new hard drive as follows:
Code:
# chroot /mnt/sysimage
# grub-install --root-directory=/boot hd0
reboot and remove FEDORA CD Using the 2nd option above, I get the GRUB> prompt during bootup. I can then boot into the system by issuing the commands that are in the menu.lst file, followed by the "boot" command. However, I would like for those commands to happen automatically, just like in the original configuration. It seems to me that GRUB is actually finding all its stage files because I doubt the GRUB program (the one displaying the prompt) fits entirely in the 446 bytes it has on the MBR. So, it must be loading its stage 2 (and stage 1.5??) files from my /boot partition. However, if GRUB is loading its stage files off the boot partition, why does it not load/read the menu.lst/grub.conf contained in the boot partition also?
Code:
# ls -l /boot
total 22888
-rw-r--r--. 1 root root 1274567 2009-05-27 16:39 System.map-2.6.29.4-167.fc11.i686.PAE
-rw-r--r-- 1 root root 1274538 2009-06-16 22:27 System.map-2.6.29.5-191.fc11.i686.PAE
[code]....
after yesterday's update to kernel 2.6.35.10-72 my grub.conf didn't get updated and ll /boot shows that neither vmlinuz or initramfs exist for that kernel. uname -r though tells me I'm running 2.6.35.10-72.
How can I do that? and on another more reallystic matter how can I generate the missing files so I can manually update grub.conf?
I've just installed Fedora (F13) for the first time, on a new HDD, to give myself a dual-boot system. So currently I have:
So, at the appropriate stage in the install menu, there is an option for where to install GRUB, and a drop-down to choose which drive is the primary BIOS boot drive.
However, in both cases, no other drive except my new sdc is visible. So, I can install GRUB to MBR of sdc, or to first sector of boot partition - but no option to put it to my primary boot drive MBR on sda.
Likewise, in the GRUB configuration page, if I go to Add another OS, the only option it gives me is my new Fedora install. It doesn't list the Vista OS on sda at all.
The result is that I can boot to either OS by changing the boot drive priority in BIOS.
I guess my question is this:
- is this expected behaviour from the installer, meaning that I'll need to configure GRUB manually somehow? (gulp ) or
- did I do something wrong in the install process? or
- is this some weird bug manifesting itself?
i have installed dhcp server on RHEL5.after instalation when i want to restart it.it shows failed message. rpm package is also installed.(dhcp-3.0.5-13.el5) dhcpd.conf file is also in /etc directory
View 1 Replies View RelatedI tried upgrading to my linux to fedora 12 through updates and that completely screwed up my computer. Next I burned a disc with F12 and tried to a clean install but the installer stops after 823 packages. I tried an older FC9 image and that does not go through either. Now I'm stuck , I cannot get to my windows because I cannot get to GRUB . Is there a way to just install GRUB and boot into windows. I see that GRUB is around package # 600 or so in the installation and it does get upto that point.I just need it to finish instead of barfing on packages (no skip option in linux installer how clever!)
View 1 Replies View RelatedPrefactory note - I've also posted this question on the Ubuntu forum, but so far no solutions have been provided.
My system has several hard drives. The important ones are these:
Sata 1 - Fedora 12
Sata 3 - Windows 7
Slave 1 - Storage
Sata 1 was NOT installed with grub. When I switch OSs, I do it by rebooting and choosing the other drive as primary.
I downloaded an ISO of Ubuntu 9.10 (64 bit) and burned the DVD of it. I backed up Slave 1 and then booted off the Ubuntu DVD. I clicked on "Install Ubuntu", selected Slave 1, and installed onto it.
Subsequently I rebooted the machine, going into the BIOS to boot off Sata 1, so I could get my Fedora Firefox settings to replicate them under Ubuntu.
Instead of Fedora 12 booting, Grub 1.97 came up. It had 5 choices, Ubuntu, Ubuntu Repair, Memtest, some other Memtest, and Windows 7.
Subsequently I tried cracking the box and physically disconnecting Slave 1. When I rebooted Sata 1, it crashed to a grub command line. Apparently when Ubuntu installed, it infected Sata 1 with grub, even though it installed the rest of Ubuntu on Slave 1.
I really, really, REALLY need to get access to the Fedora 12 drive. It's got my work on it.
how I can get grub out of Sata 1 and regain access, or maybe reconfigure it so it recognizes the existence of Sata 1? Personally, I don't want it there; that's why I never installed it in the first place.
I have installed fedora core 9 with a successful installment but the GRUB is not loading Vista BOOT MGR is Missing root chain loader +1. Booting Other does not load.
View 14 Replies View RelatedI'm a F11 user and I wanted to see the new Windows 7 and right now, the computer doesn't boot via grub.
View 2 Replies View RelatedI have two problems. I installed a RHEL variant (scientific linux) on an already dual boot system with ubuntu and vista.
It replaced GRUB with (I think an older) GRUB version and to add to that I cannot see my ubuntu ditro anymore. is there a way of reinstalling the GRUB that came with ubuntu then adding the RHEL distro to it?
my second problem is that I cannot figure out how to enable wake on lan in scientific linux (RHEL). on ubuntu I would just write a small script and update all runlevels to run it at startup. what is the alternative on redhat?
I installed Fedora13. But my Windows is Gone. I followed Next-->Next and completed installation after 1 hour. When i restarted the system, isaw blue screen something called grub and windows is not listed. I had important data in it where did it go?
View 14 Replies View RelatedI wanted to check what version of GRUB I have installed. I went to terminal and typed grub --versionI got this message back: The program 'grub' is currently not installed. You can install it by typing: sudo apt-get install grub
I am running Ubuntu 10.10 alongside windows xp pro. When I turn my pc on I have the option to boot to ubuntu or xp and at the top of the window it says that the version of grub running is "GNU GRUB Version 1.98+20100804-5Ubuntu-3" how I shold go about installing GRUB 2 or just leave it as is.
Is it possible to import an xorg.conf file from Debian to Fedora and have it work? The reason for this is that I have an older monitor that only offers 800x600 as the maximum resolution.
View 2 Replies View RelatedI just recently installed a kernel, everything works fine after reboot except. When I use nano -w /boot/grub/grub.conf I get /boot/grub/grub.conf: No such file or directoryIs there something i have to do after installing a new kernel in Gentoo Linux.I can't access my /boot all that appears there is a symlink to /boot How can i see my kernels located in /boot.
View 3 Replies View RelatedI have C: and D: on my computer. the D drive has 250 GB of free space. I would like to install it on the D drive without harming my existing windows. I have booted through an USB and it has an icon that says "install fedora on your hard disk". How do I make sure that it will be installed only my D drive without harming my windows?
View 1 Replies View RelatedI have recently installed Fedora 15 KDE (with Dual Boot Win7) on my computer:Dell Optiplex 330, Intel Core2Duo- 2.53 GHz, 32 Bit, 2GB RamnVIDIA 8400 GSWhile going through the Guides mentioned here: for F15, I tried to install nVIDIA Drivers after updating the Kernel.suyum update kernel*rebootHowever it gave me some errors and then I did try the following method (as described in Missingbox studio guide)su -yum install akmod-nvidia xorg-x11-drv-nvidia-libs.i686 bootconf-gui kernel*develfollowed by Reboot.
I start my computer, I get the screen which shows that Fedora will boot in 3 seconds. This is followed by a black screen with a "Blue followed by white" Bar running towards right (where Fedora 15 is written)....It stays there for ever (I waited for 3 hours and then switched off my computer).Presently I am writing this post through Windows7.Is there any way I can repair Fedora through Win7 or by any other means.---------- Post added at 10:57 AM ---------- Previous post was at 10:51 AM ----------I remember the instructions (given by leigh123linux) that we should provide the following information
rpm -qa *vidia* *kernel*|sort;uname -r;lsmod |grep -e nvidia -e nouveau;cat /etc/X11/xorg.confI had it saved as a .txt file in my home folder.
I recently upgraded from Fedora 13 to Fedora 14 and noticed something strange when I used Yum to install GNote and Inkscape. Yum installed the Fedora 14 version of the programs, but installed some dependencies that were actually from Fedora 12 and 13. The output below shows what packages were installed.
Yum output:
==================================================================================================== ===================================================================
Package Arch Version Repository Size
[code].....
When I ran the yum command to list all of the packages for the dependencies in question, it only listed the version for Fedora 12 or 13. Is there something wrong with one of my repositories or do these Fedora 14 programs actually use packages from previous versions of Fedora?
So i'm VERY new at this, i need fedora for this research i'm starting. I have a dell and vista was installed on it, then i installed fedora 10 like it said on the fedora site from a boot disc. Now i have fedora but i don't have vista nor access to the memory it took up. I tried to restore to start over but i can't, and i need vista back.
Normally i would restore from the 10 G partition dell sets up for recovery but i'm not able to get to it, and i don't have my vista discs they're back at school.
What do i do?
i have insatlled fedora 9 on a system with xp already installed on it but when i start fedora it hangs while booting. after starting the service ANACORN it hangs and same happens with fedora 10. it hangs while starting CUPS.
View 2 Replies View Related