after yesterday's update to kernel 2.6.35.10-72 my grub.conf didn't get updated and ll /boot shows that neither vmlinuz or initramfs exist for that kernel. uname -r though tells me I'm running 2.6.35.10-72.
How can I do that? and on another more reallystic matter how can I generate the missing files so I can manually update grub.conf?
I just did a simple debootstrap lenny /opt/lenny-chroot http://fpt.de.debian.org/debian There is no vmlinuz or initramfs under /opt/lenny-chroot/boot. What would be the next minimalistic necessary step to get it there?
View 1 Replies View RelatedI have a Lenny inside a xp. I changed my installation and make a boot partition , a home directory, and a system directory. now I reinstall my xp and do this:
find /grub/stage1
root (hd0,6)
setup (hd0,6)
and grub menu found! but when I clicked on debian, can't boot and I have a message about can't boot from this vmlinuz ( or any thing similar!) , click on any key and then it come back to grub menu. my debian is on (hd0,9) and (hd0,6) is my boot partition.
I'm trying to set up some shares on this pc and every time I try to edit the /etc/exports file I get this error. I get the same error when I try to edit /boot/grub.conf file or any other files. Does not matter what editor I use. I'm running f14.
View 3 Replies View RelatedI used the update manager to update the kernel and whatever the other recommended updates were yesterday. I shut the computer down overnight and now when i try to boot into Ubuntu 9.10 i get a basic grub shell and when i try commands like "boot" it tells me there is no kernel loaded. I installed Ubuntu with Wubi so it is a dual boot system.
I've tried to access the Linux volume with a live OpenSuse 11 CD but there is no device to mount. It sees the entire hard-drive as if it hasn't been partitioned. I don't necessarily need to fix the installation. I just need to get my files back.
The latest update changed the default boot from 0 to 1 and added extra parameters to the new kernel boot line.
default=1
timeout=8
splashimage=(hd0,7)/boot/grub/splash.xpm.gz
# hiddenmenu
title Fedora (2.6.31.6-145.fc12.x86_64)
root (hd0,7)
[Code]...
I'm using Fedora 15 on my Dell Inspiron 17R (dual booting with Win7) I'm trying to edit the GRUB menu after an update, but when I try to gedit the menu.lst file, I'm getting an error.
(gedit:1884): EggSMClient-WARNING **: Failed to connect to the session manager: None of the authentication protocols specified are supported
g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting. Terminated Is this an error I can resolve? Did I do something to break it
I just tried setting my vga mode in grub.conf so that I can have my boot splash back after disabling nouveau. Works great. Problem is, now, that after doing this my touchpad is disabled. Anyone else run into this? I'm on an HP dv6, FC13, vga=0x37b. I remove vga mode setting and touchpad works again.
View 1 Replies View RelatedI am trying to edit my grub.conf file. I am logged in as root. It says it is a read only file. I have tried to set permission with chmod 777 and also tried through GUI. Using VI it says it's a read only file. Using nano it will not write either. I have two choices on boot up. I want to automatically go to second automatically. First at the moment is CentOS-4 i386 (2.6.9-55.ELsmp) and second is CentOS-4 i386 (2.6.9-55.EL).
View 9 Replies View RelatedI've just installed Fedora (F13) for the first time, on a new HDD, to give myself a dual-boot system. So currently I have:
So, at the appropriate stage in the install menu, there is an option for where to install GRUB, and a drop-down to choose which drive is the primary BIOS boot drive.
However, in both cases, no other drive except my new sdc is visible. So, I can install GRUB to MBR of sdc, or to first sector of boot partition - but no option to put it to my primary boot drive MBR on sda.
Likewise, in the GRUB configuration page, if I go to Add another OS, the only option it gives me is my new Fedora install. It doesn't list the Vista OS on sda at all.
The result is that I can boot to either OS by changing the boot drive priority in BIOS.
I guess my question is this:
- is this expected behaviour from the installer, meaning that I'll need to configure GRUB manually somehow? (gulp ) or
- did I do something wrong in the install process? or
- is this some weird bug manifesting itself?
I am trying to fix missing grub.conf on RHEL5.I booted from installation media > entered Rescue Mode > issued following cmds:
chroot /mnt/sysimage
grub-install /dev/sda1
:I get a message that installation is finished with no error and a device map is created.
when i reboot (without installation media) i land up at grub>from grub> i did followingroot (hd0,0)setup (hd0)and got successful installation message.On rebooting I again get the grub> prompt
Yesterday I ran updates that moved me from kernel Fedora (2.6.34.7-61.fc13.i686.PAE) to Fedora (2.6.34.7-63.fc13.i686.PAE). After reboot my system hangs trying to start X. I can use altF2 and log in that way but when I try to start X it fails - no screen found. I backed off to my previous kernel and used the package manager to remove the updated kernel and noticed that when it uninstalled it did not take any kmod packages with it. I assume not having an associated kmod may have been the problem? If so, how do I find the correct one to install?
relevant info:
Fedora 13 32 bit PAE (KDE spin)
video card - nvidia 460gtx
video driver - nvidia 260.19.21
I was running an update to updgrade firefox to the latest version. the update timed out and now when i boot the laptop i get the command line login. Typing startx brings a screen with a black cross in the middle and a black and white background.
In the boot process a lot of errors are coming up saying "conf files need .conf". Also i have noticed an error that says the xorg.conf file is not where it should be. I know this is responsible for graphical boots so could be my problem. However yast and network services are also not working in the command line so i am unable to update to fix this. I installed from a live CD so im unsure how to use this to repair my system?
Yesterday I installed Fedora 15 instead of Ubuntu 11.04. I have nvidia card, so I've searched for nvidia driver installing howto and found it on this forum [URL]. But after updating kernel -
Code:
yum update kernel*
(now it's latest - 2.6.39) - and rebooting Fedora didn't start. I even don't know if it's something with GRUB because It automatically loads Fedora and I can't know whether it's its problem. When I try to start Fedora, I just see black screen with blinking underline cursor at the top left of the screen and it's the first and the last I see except laptop splash screen. I have Asus F50SV (Nvidia GT120M). By the way, I've tried to install nvidia drivers manually and xorg.conf became broken. I've edited it and now it like this:
Code:
# RPM Fusion - nvidia-xorg.conf
#
Section "Device"
[code]....
Contents of grub.conf
Code:
# grub.conf generated by anaconda
#
[code]...
Dell Studio 1555 (Wireless WLAN 1397 Half MiniCard (4312bg)) Wireless doesn't work after update of kernel (kernel-PAE-2.6.38.8-35.fc15.i686)
Quote:
Originally Posted by iwconfig
# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
What should I do to repair wireless?
I'm running Fedora 13 x64 and updated the kernel to the latest version (2.6.34.7-56 to 2.6.34.7-61). I use the proprietary nvidia drivers (currently 260.19.12) so I had to compile the kernel module against the new kernel sources and reinstall the driver. The process was apparently successful, but when I try to start X nothing happens, it's as if the computer had been suspended, my monitor acts like it isn't receiving any input. I have full runlevel 3 access, and the system seems pretty much fine up to that point. Nvidia's own sanity tests which are built into the installer reported no problems with my driver.
View 14 Replies View RelatedI am compiling a new kernel. I have successfully compiled it, how to modify grub.cfg. I am using ubuntu 10.10.
Can I use 'update-grub' ?
I tried using that and even its updating the grub with new kernel. But after I boot the new kernel its showing
The disk for / is not ready or does not exist
#and some statements# M for recovery ...
Is there any problem with kernel compilation and why is that coming ?
Cannot edit xorg.conf on Fedora13. I do it from the root but changes is not saving.
View 7 Replies View RelatedIn my Red Hat 7.2 , the /boot/grub/grub.conf has the following data :
But when I reboot my Red Hat server , I don't see the Grub menu to say edit the boot kernel .
I need to change a game's screen resolution in a couple of .con files, but when I double click on them all I get is success in a little pop up window. Can I move them to my computer, edit them with a text editor, and reinsert them with read only privileges?
View 2 Replies View RelatedWhat is the command I use to edit the xorg.conf in fedora?
Achieve using the following command:
My sample rates are out of whack and I need to edit the daemon.conf file.
However if I use
Code:
It will open the file but will not let me edit at all. If I just navigate to it I can edit it, but I can not save it!
I tried going in as root from the terminal and using the code above and I get a weird error.
Something like:
Then it says core dump.
Am I missing something to be able to edit the daemon.conf ?
I'm using 2 cloned disks with CentOs5.3 and I need to be able to control which one is booted. I can specify which disk in the BIOS but after stage 2 it is always running from disk 2. When I have puppy linux on one disk and CentOs on the other I can boot off of either as selected by the system BIOS so the BIOS is not the issue. I think it is how the root option is passed in the kernel command in the grub.conf.
kernel /vmlinuz-2.6.18-128.el5 ro root=/dev/VolGroup00/LogVol00
I think when the OS searches for the /dev/VolGroup00/LogVol00 share is locates 2 since the disks are clones and uses the last one found. On information I have found for the kernel command and the root option it appears CentOs uses it differently. CentOs uses a volume name as specified /dev/VolGroup00/LogVol00 instead of a partition designator /dev/hda2. Is there a different way to specify /dev/VolGroup00/LogVol00 in CentOS for the root option for the kernel command of grub.conf?
In previous openSUSE versions I was using WICD as network manager. I upgraded my openSUSE to 11.4 and resolved give a try to the NetworkManager. I can get network connection, but the dhcp doesn't update the /etc/resolv.conf, so I can't navigate because the dns isnt set.
I tried to reinstall all related packages (dhcp, dns and networkmanager) without success.
If I run dhcpcd the resolv.conf get updated, but dhclient doesn't do the same. It seems that's a dhclient script issues, but I don't know how to test.
I wireless network card is Broadcom Corporation BCM431, but is doesn't work after I update kernel from
2.6.29.6-217.2.7 to 2.6.29.6-217.2.8.
Linux localhost.localdomain 2.6.29.6-217.2.7.fc11.x86_64 #1 SMP Fri Aug 14 20:53:08 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
I'm using an acer aspire one netbook and attempting to install ubuntu 11.04 on it using flash drive. I extracted the installer using the universal usb installer. Anyway as soon as I get to the ubuntu installer screen it won't let the installer begin and says this: "could not find kernel img:/casper/vmlinuz. I have tried many things including typing in this:"vmlinuz initrd.img" and extracting the data to the flash drive again but nothing has worked.
View 2 Replies View RelatedI have successfully installed fedora 10 and have rpmfusion in my /home/ directory. i don't know how to edit yum.conf to make yum install from this local repo. i tried once. But when i tried to install vlc i got an error saying some lib****** files are missing and missing dependencies.
View 2 Replies View Relatedi have a lenovo g550 with nvidia geforce g 105m i tried to install its driver on fedora 11 and 12 and i have followed the instructions of setup as in fedora sites and forums, the problem is after installation i have 6 equal screens 640*320 and i don't know how to edit xorg.conf
View 4 Replies View Relatedsince i have installed the nvidia drivers i have lost the graphical boot and just had a bar at the bottom of the screen instead. i tried to get the graphical screen back by adding vga=795 to my /boot/grub/grub.conf but when i rebooted not only did i not get the graphical boot or the toolbar at bottom.
i got list of all the drivers and services it is starting with ok next to it. i have also since doing this lost the bit when restarting or shutting down getting the words restarting or shutting down and just get blank screen with flashing cursor. i removed the vga=795 and i still get the list of drivers/services loading.
how do i get the quiet option back. i have checked /boot/grub/grub.conf and it has the quiet in it.i have also tried running update-grub but get message command not found. i have attached the grub.conf file