Fedora :: Get The Graphical Screen Back By Adding Vga=795 To /boot/grub/grub.conf
Nov 21, 2009
since i have installed the nvidia drivers i have lost the graphical boot and just had a bar at the bottom of the screen instead. i tried to get the graphical screen back by adding vga=795 to my /boot/grub/grub.conf but when i rebooted not only did i not get the graphical boot or the toolbar at bottom.
i got list of all the drivers and services it is starting with ok next to it. i have also since doing this lost the bit when restarting or shutting down getting the words restarting or shutting down and just get blank screen with flashing cursor. i removed the vga=795 and i still get the list of drivers/services loading.
how do i get the quiet option back. i have checked /boot/grub/grub.conf and it has the quiet in it.i have also tried running update-grub but get message command not found. i have attached the grub.conf file
View 3 Replies
ADVERTISEMENT
Aug 31, 2010
I would like to modify the boot loader settings and triedo open the file grub.confHowever, it is said that the file could not be opened, as seen in the attachment.Tried to authenticate as 'root' before opening the file, but the problem still exist...
View 10 Replies
View Related
Sep 21, 2010
I've just installed fc 13 on my laptop. It's got windows and mepis linux on here also. the installer for fc only found windows and I was wondering if there's a way to modify the graphical grub screen to contain mepis linux or if i have to disable it and use a standard text screen for grub.
View 1 Replies
View Related
Apr 14, 2009
I've installed Fedora 10 on the third partition of an external HDD. It has with the following partitions:
(hd0,0) - GRUB bootloader files [PRIMARY]
(hd0,1) - Chainload LILO for another Linux [PRIMARY]
(hd0,2) - Fedora 10, no LVM or Swap (labeled F10) [PRIMARY]
I'm trying to boot Fedora 10 using the following grub.conf:
[Code]....
View 3 Replies
View Related
Jan 31, 2011
I'm trying to set up some shares on this pc and every time I try to edit the /etc/exports file I get this error. I get the same error when I try to edit /boot/grub.conf file or any other files. Does not matter what editor I use. I'm running f14.
View 3 Replies
View Related
Jul 3, 2010
I just recently installed a kernel, everything works fine after reboot except. When I use nano -w /boot/grub/grub.conf I get /boot/grub/grub.conf: No such file or directoryIs there something i have to do after installing a new kernel in Gentoo Linux.I can't access my /boot all that appears there is a symlink to /boot How can i see my kernels located in /boot.
View 3 Replies
View Related
Feb 26, 2010
I've been running openSuse 11.2 for a while on my notebook.Today I turned it off at work and came home. When I tried to turn it on, it boots, shows a black screen written 'GRUB' and then NOTHING. It doesn't complete the boot process.
View 9 Replies
View Related
Oct 13, 2010
I've just installed Fedora (F13) for the first time, on a new HDD, to give myself a dual-boot system. So currently I have:
So, at the appropriate stage in the install menu, there is an option for where to install GRUB, and a drop-down to choose which drive is the primary BIOS boot drive.
However, in both cases, no other drive except my new sdc is visible. So, I can install GRUB to MBR of sdc, or to first sector of boot partition - but no option to put it to my primary boot drive MBR on sda.
Likewise, in the GRUB configuration page, if I go to Add another OS, the only option it gives me is my new Fedora install. It doesn't list the Vista OS on sda at all.
The result is that I can boot to either OS by changing the boot drive priority in BIOS.
I guess my question is this:
- is this expected behaviour from the installer, meaning that I'll need to configure GRUB manually somehow? (gulp ) or
- did I do something wrong in the install process? or
- is this some weird bug manifesting itself?
View 12 Replies
View Related
Nov 20, 2010
my Setup is Fedora 14 x64 + radeon hd 4830 i've downloaded .run package from ati site with latest driver for x64 systems. installed it, but didn't edited grub.conf becouse i didn't understood anything there (probably didn't spent enough time to get things understand) Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen. nothing works except Ctrl+Alt+Delete. system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 4 Replies
View Related
Jul 28, 2009
I am testing my crash recovery strategy for my linux system and I am having trouble with GRUB. I am basically restoring my backup (i.e. tar) unto a different hard drive, but I am having problems getting the machine to boot without me having to type the GRUB commands at the GRUB prompt that is presented when the machine boots up off the new hard drive. I have tried to restore the MBR in two ways (the 2nd one is the one that gets me to the GRUB prompt):
1. Get the MBR off the original drive and write it unto the new drive (all via dd), but that did not work at all: the machine hangs right away during boot up. It seems to hang right at the point where the BIOS tries to read the MBR.
Code:
On original drive:
# dd if=/dev/sda of=mbr+part.bin bs=512 count=1
On new drive (new drive is now in place of original drive):
# dd if=mbr+part.bin of=/dev/sda bs=1 count=446 conv=notrunc
2. By using the FEDORA rescue CD, I installed grub unto the new hard drive as follows:
Code:
# chroot /mnt/sysimage
# grub-install --root-directory=/boot hd0
reboot and remove FEDORA CD Using the 2nd option above, I get the GRUB> prompt during bootup. I can then boot into the system by issuing the commands that are in the menu.lst file, followed by the "boot" command. However, I would like for those commands to happen automatically, just like in the original configuration. It seems to me that GRUB is actually finding all its stage files because I doubt the GRUB program (the one displaying the prompt) fits entirely in the 446 bytes it has on the MBR. So, it must be loading its stage 2 (and stage 1.5??) files from my /boot partition. However, if GRUB is loading its stage files off the boot partition, why does it not load/read the menu.lst/grub.conf contained in the boot partition also?
Code:
# ls -l /boot
total 22888
-rw-r--r--. 1 root root 1274567 2009-05-27 16:39 System.map-2.6.29.4-167.fc11.i686.PAE
-rw-r--r-- 1 root root 1274538 2009-06-16 22:27 System.map-2.6.29.5-191.fc11.i686.PAE
[code]....
View 3 Replies
View Related
Jul 31, 2011
is it ever possible to do dual booting with grub(legacy) ever at all!. it is possible provided i take some pain, here is the link of that post [URL] i was coward and weak i didn't try that out then. but i did try it out. now so if u haven't seen the post .... I've installed Fedora 15 desktop(Gnome) with physical Logical volume called vg_fedora lv_root(ext4) ,lv_swap and lv_home(ext4), with 500MB /boot partition and had about 200GB free hard disk space ... so i wanted to install Scientific Linux 6.1 (because our school uses RHEL 6.1)
so, while running the installer I made (added) a logical volume lv_Scientific with ext4 FS and made its mount point (/) and used the MBR /boot which overwrote the Fedora /boot (completely OK and was as expected) i restarted after installation i got SL log in and as per the directions of the thread i copied the boot stanza from grub.conf of fedora 15 (which i already had copied and pasted into a text file and copied it from there)and pasted it into grub.conf of SL you may ask why did i choose same physical LVM too save swap space ... if i had made another physical LVM i had to make another swap ( i like LVM ... its cool)
completely unexpected happened Fedora now boots but not SL when grub starts i get this error 27 unrecognised commad and when i press <enter> i get grub menu with SL and fedora when i press on Fedora it works well i get my fedora login and i did login .. everything works fine but when i press SL it goes to the previous black screen grub error 27
[Code]...
View 14 Replies
View Related
Mar 17, 2011
Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen....nothing works except Ctrl+Alt+Delete....system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 6 Replies
View Related
Jan 24, 2010
Recently, I accidentally erased plymouth from my Fedora 12 system.I now have reinstalled plymouth.But I still do not have my graphical boot. How do I switch back to graphical boot?
View 2 Replies
View Related
Apr 9, 2011
I boot my slackware through usb and I don't install lilo. I want to add slackware to fedora grub.conf.I have tried some methods,but failed. How can I do? fedora grub.conf
Quote:
title Fedora (2.6.35.10-72.fc14.x86_64)
root (hd0,5)
kernel /vmlinuz-2.6.35.10-72.fc14.x86_64 ro root=UUID=5cc13bf9-725f-
[cod3e]....
View 14 Replies
View Related
Jun 19, 2010
I want to install ubuntu 9.10 into other partition, but I want the win xp boot.ini file to configure my boot settings, not the GRUB. First I want to ask is it possible to install ubuntu, but add a boot entry in boot.ini? If not, then I know how to remove it, i found a file called ms-sys, with it I can remove GRUB. So let's say grub is no more, what should be an entry to ubuntu. When it was installed into Windows it was
Code:
c:wubildr
now what should I enter, my guess would be
Code:
m:ootgrubmenu.lst
View 3 Replies
View Related
Jan 28, 2010
I'm using slackware 13 and now i want to add slackware 13 to grub .How do i have to do it ? Slackware is great to learn because i've a lot of linux using slackware than using any other distro. But some programs are dependant on other which i was not able to install, they call it dependencies. Even though compiling from source is great but runnning the program is a problem as the program terminates may be because of some dependency not installed.The same goes with sbopkg and others ..As of now i'm thinking of installing Ubuntu along with Slackware13 as this system is used by everybody in the family. How to add slackware to Ubuntu's grub.......
View 3 Replies
View Related
Mar 4, 2011
I just did an update of new files including the new linux kernel (Ubuntu 10.04LTS) and it killed my opening GRUB bootloader screen plus the NEW firefox update is working dog slow. How to I get the GRUB screen back so I can go back to an earlier kernel version??
View 1 Replies
View Related
Mar 29, 2010
This is no huge problem, but it is rather annoying to me. I am using the 10.4 beta, and whenever I get a large update (like a updated kernel) GRUB adds another boot option to the menu (I'm dual booting Vista and Ubuntu.) So my GRUB menu looks something like this when I turn my computer on:
GNU GRUB version 1.98-1ubuntu2
Ubuntu, with Linux 2.6.32-18-generic
Ubuntu, with Linux 2.6.32-18-generic (recovery mode)
[code]....
View 6 Replies
View Related
Mar 31, 2010
I installed Windows XP Pro and RedHat Linux Enterprise 5 on my PC for my purpose. The PC is used by other family members too and they need only Windows OS for browsing. It is becoming problem for them to reboot after the PC enters into Linux by default. I am still learning Linux and I want to edit the /boot/grub.conf file to make Windows as default OS to boot. The following is the content of my grub.conf file (FYI):
#boot=/dev/sda
default=0
timeout=10
splashimage=(hd0,5)/grub/splash.xpm.gz
[code]....
View 4 Replies
View Related
Feb 6, 2010
With the generous help from caf4926 and please_try_again, i was able to boot into Ubuntu 9.10 with suse's grub legacy.Now I have another problem that i'd need help on, I added a new IDE hard drive for storage and it became sda and the original sda with 3 OSes changed to sdb. Grub can't boot into any OSes except windows 7. Well, i can still boot into Ubuntu if i change the boot option from
Code:
root=/dev/sda2 ro quiet splash
to
[code]...
View 9 Replies
View Related
Sep 9, 2010
I'm currently trying to get to the root of an problem on startup; unfortunatly when booting after the first couple of messages when booting without quiet and with nosplash in the grub menu I still end up with the nice blue background and the slowly filling bubble... I'd like to go back to the old, boring, messy, but much loved and now much missed (least by me) text boot screen where I can see wtf my system is doing and where its hanging during the boot process.
(I know the cause of the hang now but still want to go back to the old fashioned noisy boot environment - not a fan of the windows style silent boot... I like to know what's going on and that my PC hasn't decided to join the French and go on strike, though wouldn't blame my poor netbook if it has, hammering the bleeper doing random number analysis - not something an atom 270 is designed for)
View 3 Replies
View Related
Jun 26, 2011
I don't really have any Linux experience. But I wanted to try it out. Now I'm afraid I did not set this up properly. Grub gives me 3 options:
Fedora (2.6.38.8-32.fc15.x86_64)
Fedora (2.6.38.8-26.rc1.fc15.x86_64)
Other
When I select <Other> to boot into windows... it starts to try to boot... but then flashes a quick blue screen & restarts. I tried to boot into Window's normal mode, safe mode, and command line... all just restart fdisk -l gives the following:
[Code]....
View 4 Replies
View Related
Mar 15, 2010
I have an Acer Aspire 5810T which came with Windows Vista. I prefer Ubuntu but I need some windows applications so I dual-booted Vista and 9.10.
There was a few minor problems with the Vista side but I didn't use it enough to care. A few weeks ago Vista would not open some programs and others would shut down automaticly and some would open but not connect to the internet like they should. This happened on my previous laptop and when I used the system recovery discs to restore the computer all those issues were gone.
I used the recover discs to restore everything to its original factory settings, it said everything was successful so I restarted. My computer got to the grub menu but when I chose Windows Vista as my operating system it goes black for half a second then returns to the grub menu.
I can get into Ubuntu fine, and I can see the Vista files when I mount the drive to Ubuntu. When I look at the files everything is the way it should be if I had restored it but I can't boot it..
View 9 Replies
View Related
May 6, 2011
I am persuaded now (too late) that I need to invest in a robust backup scheme.
I had refit dual-booting snow leopard and ubuntu 10.10.
I tried to upgrade to 11.04 and it got stuck on bootup after the upgrade.
So I went into disk utility and deleted what I thought were all partitions except the mac one. I rebooted, and now I get the grub no partition error.
Did I delete my mac partition? I don't think that I did. How do I boot back into mac os x? Using the option key on bootup no longer shows a mac disk and inserting the mac os x system cd doesn't show any options either.
View 9 Replies
View Related
May 23, 2011
I have 10.04 and 11.04 in dual boot. how I can get back to exclusively 10.04. I am nervous about the GRUB change.
View 7 Replies
View Related
Sep 9, 2009
What is the configuration issue in the other-than-Fedora-11 stanza below that prevents that OS from booting? That stanza is taken directly from the /boot/grub/menu.lst of that OS, whose root partition is on sda5. All I get upon choosing the menu entry is a blinking cursor and a steady HD light. obsessing over this for a couple of weeks, reading what I can find about grub configuration but without joy.
Here is /boot/grub/grub.conf:
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You do not have a /boot partition. This means that
# all kernel and initrd paths are relative to /, eg.
[Code]......
View 7 Replies
View Related
Dec 3, 2009
The latest update changed the default boot from 0 to 1 and added extra parameters to the new kernel boot line.
default=1
timeout=8
splashimage=(hd0,7)/boot/grub/splash.xpm.gz
# hiddenmenu
title Fedora (2.6.31.6-145.fc12.x86_64)
root (hd0,7)
[Code]...
View 1 Replies
View Related
Nov 16, 2009
After a kernel upgrade on my linux, my grub.conf become empty. How can I auto generate grub.conf file? I don't want to do it from scratch.
View 3 Replies
View Related
Feb 1, 2010
I have windows vista on one sata HDD, and fedora on a second sata HDD. After installing fedora of course the grub is auto booting fedora. I would like vista to be the default O/S. I dont care if i modify the grub file to have it manually boot vista, or to remove the grub interface all together, i just want it to auto boot vista. My bios is programed to boot my vista drive before my fedora drive, however it keeps booting the grub and it boots fedora, which i find kind of odd. below is the contents of my grub.conf file:
[Code]....
*NOTE: i have already tried changing the 'default=0' to 'default=1' and restarting the computer, as i saw in a different post on these forums, however that did not fix my problem. Im guessing its because i have the operating systems on two seperate drives, where the other guy just had them on a single drive.
**EDIT: after posting i had to modify lines 6 and 10 of my grub.conf file because it had smileys at the end lol. i put a space in between the 8 and the ) for posting purposes only, my actuall file does not have these spaces.
View 9 Replies
View Related
Jan 3, 2011
I have just completed a clean install of Fedora 14 on a new disc (/dev/sdc)My old system disc (/dev/sda, an LVM 'vg_phenom00') is still installed.I note that my /etc/fstab has entries for the swap space on both disks;
Code:
# /etc/fstab
# Created by anaconda on Mon Jan 3 09:00:29 2011
[code]....
View 5 Replies
View Related
