Fedora :: IPhoneModem Setup - Connect Laptop And Iphone To New Wireless Network?
Feb 23, 2009
This will allow you to use iphones' data plan as a wireless access point. Currently setup instructions are only posted for windows/mac using a helper app to configure the laptop. Here are the instructions I followed to setup iphonemodem2 to work under Fedora 10: Download iPhoneModem2 from a jailbroken iphone using Cydia. Create a new wireless network on Fedora with the following settings:
a) SSID = "iPhoneModem"
b) Mode = Ad-hoc
c) IPv4 Method = Automatic (DHCP)
Connect laptop and iphone to new wireless network. Start iphonemodem app on iphone. The "traffic" does not update; the "status" says "Wrong Wifi Network"; and the signal strength says 0%. However, the network connection should be there as long as you have a data signal to your service provider.
I'm try to setup a wireless network with my linksys wireless router and my HP laptop dual booting Vista & Suse 11.2. I have the vista networked, just fine. Where I can share files and the printer connected to my desktop. But I want to be able to use Suse in the same way, full time and to stray away from Vista. My wife and kids like easy. So I'm trying to transform them and show them something new.
On Opensuse 11.2, I would like to connect my ipod touch to a wireless ad-hoc network of my laptop. I have no wireless WIFI-router at home, so I have to use the laptop as a router to the internet. I know I have to enter a static IP adres and my router's address, but where ? I haven't found any place under network tools to do this, only saw some fields with SSID's and MAC addresses to fill in.
I have fedora 13 installed in my laptop lenovo G450. Inside the file networking-scripts I can find the ifcfg-wlan0. But it can't find any SSID when I scan the network.
I tried operating manually also.
But it can't be connected to any network. The wireless device is also powered on.
But I am not able to connect to the wireless network.
I'm at wits end...10.04 won't connect to a wireless network on my laptop, and that sort of makes it useless. What is the easiest way to revert back to 9.10? I have a dual-boot system with XP and I'd rather not have to start from scratch.
how can I mount my iPhone in Opensuse? after i connect my device to laptop via USB,opensuse doesn't mount it and recognize it at first as a digital camera.
I have ASUS Laptop A6Rseries was running XP untill I installed Linux 9.10. Now i am having problem connecting to my wireless network. I am using Belkin router what works fine with XP, Vista and Windovs 7. Here is some information what I found
lspci 00:00.0 Host bridge: ATI Technologies Inc Device 5a31 (rev 01) 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
I have installed Fedora 15 on a Acer Aspire one computer laptop. I have some missing windows for Network settings windows.First issue:When setting wep or wpa or wapa2 there is no windows to type in the passphase and key so the laptop can connect to the wireless netgear wireless router.Second issue:Once a password is typed in the one line access there is no way one can reset what has been typed in. Gassp! Check this out....one can highlite wireless and options does not light up. When one highlite wired options lightup and you can click on the tab 801.11something like that for wireless but this is for the wired not for wireless.....I know because I have tried it and had to reinstall fedora software because I could not remove the password and user name
I've got my Lenovo T60 laptop wireless running without too much trouble, the only problem is when i close my laptop lid and open it again the wirelessconnection is down and i simply cant click on the network icon in the notification area to re-connect as wlan0 is inactive. If i go to System>admin>network i cant activate the interface either as the 'active' button is greyed out, the only way to get the thing to come alive again (other than a full reboot) is to toggle the wireless switch on my laptop off and then back on.Not sure this should be required, i've got the interface configured to start automatically but it doesnt seem to care.
After searching/googling for information related to the topic, I haven't been able to get this working in KDE. Background: I have a Dell Studio 1745 with builtin Intel 5100bg wireless card. It connects to my Linksys WRT54G router just fine in openSUSE 11.2 & 11.3 using either KDE or Gnome. In Fedora 13 it only connects under Gnome, not KDE. Those are using NetworkManager. Using traditional ifup only works in Fedora under Gnome, i.e. nothing works under KDE in Fedora.
This is on Lucid, using a Dell Mini. I installed the required packages for a USB tether to my iPhone. Network Manager recognized it immediately as wwan0, but it doesn't connect. Also, it never asks me for the password to connect to the Personal Hotspot (as it does when I can connect from Windows).
I am quite new in Linux and start trying by using Fedora. I installed Fedora 10 on an old PC. I installed once and Fedora 10 recognized my wireless USB finger. Well after some setting but I cannot recall teh exact details. Due to certain reasons, I have to re-install Fedora 10. However, this time the wireless device is not working (The system recognized it and the driver is working ok but not able to connect to the access point and I caanot find a place to check the available wireless network list. I used WEP password protection so need to see the network list and select the network for prompt of the password entry.)
Since I installed fedora on my desktop (there is no other OS on my desktop computer at the moment) I can't connect to my laptop which has Windows XP installed on it, although I can normally connect to internet from both computers. Here is the drawing to illustrate how everything is connected:
On the picture you can see that the phone line goes to the ADSL modem. The ADSL modem is connected to the Wireless modem with LAN cable. Wireless modem is connected to my desktop computer with LAN cable, and trough the wireless connection to the laptop. Internet is working fine for both computers, but desktop can't see laptop and vice versa. What do I need to do in order to see the laptop?
I am having a little trouble connecting to my wireless network. Running Fedora 10 32 bit.I'm trying to connect to a hidden wireless network. I updated the firmware for my driver but apparantly the driver is still not working. Broadcom has a driver from their website for Linux 32 bit systems. Should I attempt to install it? I read a post where the driver is built into the system kernel. If so I would need to blacklist the one of the drivers. Correct?
[justin@justin ~]$ iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wmaster0 Interface doesn't support scanning. code....
I have a mainly windows house with a notebook running Fedora 11. The problem is that when this computer is on the wireless network it shows no computers on the network. It gives me the error that it can't retrieve the shared list from server. However when I am using it on the wired part of the same network it will see all of the other computers. I was wondering if anyone here could shed light on what might be going on. I am not sure if it is a setting on the computer or something to do with the router. However I don't think it has anything to do with the router because I have windows laptops that run on the same wireless access point and have no problem
I use Fedora 12 and I use Mobile Boradband to connect to the Internet on my laptop. I want to setup a wireless network using my laptop so that my roommate who uses Vista, can surf internet on his laptop. How can I do it?
My wireless (Toshiba laptop, 10.04 64 bit) is just hanging when trying to connect. It was working fine but now nothing. My Wireless antennae is on and my other laptop can connect with no problems. I have restarted the router and the laptop twice.
I picked up a cheap PC the other day for �20 and it came with a Belkin N Wireless USB adapter. I know the adapter works because Windows XP was originally installed and I could connect with no problems. I wasn't able to connect when I installed Kubuntu so I thought I'd see if I could have any more luck with Fedora....so far, not so good! I realise that this is a fairly common problem, especially for this USB adapter, but I've tried dozens of threads here and elsewhere and still can't get Fedora online.I can see the wireless networks in the list, but if I try and connect then I just repeatedly get asked to enter the authentication details, which I know I'm providing correctly.
I am going to install Fedora 14 on my home PC but I need to connect it to a wireless network.USB based wireless network interface that is supported by Fedora 14?I am looking for a USB based wireless network interface that does work after setup without the need of any particular configuration or of any unsupported software component..
I have upgraded to Fedora 15 but cannot get wireless up and running. When i switch on wireless and choose the connection it tries for 15 seconds before prompting me for the password and continues like this. When i check the device in my network config it shows as being inactive. Ralink device 3060
I'm running the 64-bit version of Fedora 12 on a MacBookPro5,1 system. I am unable to connect to my wireless network, which shows up in the list of available wireless networks.
I will enter my password and the system will try for several seconds to establish a connection and then fail.
I know the network is fine because I can connect to it when I boot the computer in Mac OS X.
What can I try that will allow me to connect to my wireless network under Linux?
F14 did not recognize my wired or wireless NIC upon installation. I have enabled network manager, what should I do from here? Here is my hardware specifications:
I am trying to get a wireless connection on my laptop. The OS is fedora minimal (without GUI, Without gnome). So I need to be connected on my Access Point, which has an hidden SSID on WPA2-Enterprise.
I am fairly familiar with Linux but had never ventured into Wlan settings / options / too much. I have compatible card (aetheros) and when running - iwlist wlan0 scanning - I get plenty networks showing up - meaning the card works. When I installed distro which is last night (before I ran update), I had that little bars menu at the top of the screen that showed available networks once clicked upon. Since I like to modify and make my settings better - I removed that little AT&T like bar, and now rebooted after update to find that I can not see available networks unless I use iwliset wlan0 scanning.... .#$*&)@&#(&%# - need I say more.
Two questions - how do you connect to the wireless network via command line? What is that vertical bars GUI tool called so I can find it and run it again? Is there (for the love of god) alternative to system-config-network GUI managment tool for wlan?
