Fedora :: 15: Missing Windows For Wireless Setup On A Laptop?
Aug 1, 2011
I have installed Fedora 15 on a Acer Aspire one computer laptop. I have some missing windows for Network settings windows.First issue:When setting wep or wpa or wapa2 there is no windows to type in the passphase and key so the laptop can connect to the wireless netgear wireless router.Second issue:Once a password is typed in the one line access there is no way one can reset what has been typed in. Gassp! Check this out....one can highlite wireless and options does not light up. When one highlite wired options lightup and you can click on the tab 801.11something like that for wireless but this is for the wired not for wireless.....I know because I have tried it and had to reinstall fedora software because I could not remove the password and user name
View 2 Replies
ADVERTISEMENT
Feb 23, 2009
This will allow you to use iphones' data plan as a wireless access point. Currently setup instructions are only posted for windows/mac using a helper app to configure the laptop. Here are the instructions I followed to setup iphonemodem2 to work under Fedora 10: Download iPhoneModem2 from a jailbroken iphone using Cydia. Create a new wireless network on Fedora with the following settings:
a) SSID = "iPhoneModem"
b) Mode = Ad-hoc
c) IPv4 Method = Automatic (DHCP)
Connect laptop and iphone to new wireless network. Start iphonemodem app on iphone. The "traffic" does not update; the "status" says "Wrong Wifi Network"; and the signal strength says 0%. However, the network connection should be there as long as you have a data signal to your service provider.
View 1 Replies
View Related
Jun 27, 2011
Trying to set up a LAN with an FC14 laptop, FC15 PC and a Windows machine running XP. I have SAMBA installed on both FC machines, but neither of them can see shares on each other or the XP machine. I can ping between all of them. The Windows machine sees all of the SAMBA shares.
When I attempt to Connect to Server under Places on the FC15 PC, I do not have a Windows share option to choose from as I do on the laptop, suggesting smbclient isn't configured correctly on that machine. SMB, NMB and WINBIND are installed and activated on startup on both FC machines. Although I have the Windows share option on the FC14 laptop, it will only connect with the IP address.
Firewalls and SELinux on both machines are disabled. Here are some configuration details:
rpm -qa | grep samba
samba-3.5.8-68.fc15.1.x86_64
samba-winbind-3.5.8-68.fc15.1.x86_64
samba-swat-3.5.8-68.fc15.1.x86_64
system-config-samba-docs-1.0.9-2.fc15.noarch
samba-winbind-clients-3.5.8-68.fc15.1.x86_64
[Code]...
View 3 Replies
View Related
Jun 20, 2010
I'm try to setup a wireless network with my linksys wireless router and my HP laptop dual booting Vista & Suse 11.2. I have the vista networked, just fine. Where I can share files and the printer connected to my desktop. But I want to be able to use Suse in the same way, full time and to stray away from Vista. My wife and kids like easy. So I'm trying to transform them and show them something new.
View 9 Replies
View Related
Feb 10, 2010
I have just completed the installation of 11.2 on a older HP Pavillon dv5115nr. Finally got everything working except for the Broadcom wireless. I have updated the firmware and I can see the AP. I have been using yast to configure the wlan device but one of the last steps it trys to perform is install smpppd. Even when hooked up via eth0 it can't find this program.
View 1 Replies
View Related
Sep 22, 2010
I've got a long road trip day after tomorrow, and thankfully, I'm not driving. I own 3 working laptops which I'm bringing with me, along with 2 brothers who enjoy starcraft (1). I've never setup a LAN before, how would I do it? My laptop's dual booting slack and lucid, the other two are vista/karmic and standalone 7. All 3 have cards capable of wireless G and Ethernet ports.
View 4 Replies
View Related
Dec 29, 2010
I'm currently installing Slackware 13.1 on my old Sony VAIO. It's got a wireless card sticking out the side of it, and I just want to make sure I set it all up correctly. I got to the screen where it's asking:
static IP
DHCP
loopback
And I'm not sure which one to pick.
View 5 Replies
View Related
Jun 6, 2010
have Unix and Windows experience. So will need some hand-holding.Need help getting my wireless network to work on my newly installed Oracle Linux on Dell laptop.Not sure what wireless card is installed, or it's mac address (though I can boot into windows and get that info I don't want to - it'll be kind of a let down if I can't fix it all thru Linux).Install has detected a Broadcom wired card, but not the wireless. Funny thing is that it detected the Bluetooth
View 2 Replies
View Related
May 19, 2011
Recently I have installed Fedora 14 on my other laptop. It's a dual boot with Windows 7. Everything worked perfectly fine, networking included, until my friend didn't accidently turned off the wireless by pressing a wireless button on the laptop. Since then the wireless on Fedora doesn't work. It does on Windows thought. I've tried restarting the laptop few times, but the wireless still doesn't want to work again.
View 2 Replies
View Related
Mar 3, 2011
I have a windows 7 (64bit sadly) desktop computer with no wireless capability. Now before I go out and spend money on a wireless usb thing, I was wondering if I could use my laptop (Ibm think pad T60 running ubuntu 10.10 dual boot with crunch bang) As a wireless access-point and connect via Ethernet cable the laptop to the desktop (Probably through a modem?) so I can use the Internet for games on the desktop computer. (Games that wont work in wine, sigh). Just a note though, 64 bit windows 7 will NOT run anything.
View 1 Replies
View Related
Jul 8, 2011
I have two ubuntu 11.04 laptops that today stopped working with my home wifi, but my windows laptop works fine. These same ubuntu laptops connect fine to iPhone wifi hotspot.
View 9 Replies
View Related
Apr 7, 2009
I am upgrading my old 40G hard drive to a new 160G one and want to know the best way to set it for use with my system. I currently have a Windows partition which I want to keep & reinstate onto the new drive. Then I want to have another 3 partitions for different distros.
What should I do as a first step when I put the drive in boot off a live CD. I am assuming that I will need to do. If I do a, # grub-install, will this then format the MBR and then create a small partition for /boot. Following that, do I just restore the Windows partition immediately after the /boot partition, and then create new partitions for the distros accordingly.
I would also like to create a seperate swap partition and then install F10. Is there an option in Anaconda to not use LVM (can't remember).
View 5 Replies
View Related
Jan 22, 2011
Fresh installation of Fedora 14 x86-64 on Lenovo T510. I'm trying to setup graphical remote connection to this laptop via VNC. I installed vnc-server package and altered /etc/sysconfig/vncservers accordingly:
Code:
VNCSERVERS="2:awajda"
VNCSERVERARGS[2]="-geometry 800x600 -nolisten tcp -localhost"
I found Remote Desktop which opens vino-preferences and ticked the check boxes there. I started vnc-server and then I tried to connect to it from the same local host using vncviewer. I got no errors and the window with correct resolution came up. The problem is - that window is black and empty. I tried looking into Fedora docs but I haven't found anything useful there. I tried google and I found about 487693746874363 solutions and different ways of installing and configuring VNC server. I tried a few - none helped.
I wonder if there is a decent and consistent documentation about how to make remote desktop working in Fedora without having a real pain in the ass trying out those gazillion tweaks and tricks from various forums and blogs? After all Fedora 14 comes with that Remove Desktop thing available out of the box. Is it a real working thing or just a marketing Should I uninstall all the preinstalled VNC stuff and follow one of those painful instructions found on the internet from A to Z praying for it to eventually start working after all the magic is done and hours or days are wasted?
View 1 Replies
View Related
Feb 27, 2010
My wireless on my Ubuntu desktop is really slow compared to my windows laptop. Its not a flash problem or a browser specific problem.
I have searched the forums but can't find much.
I did disable ipv6 (it now shows up as being 'ignored' in network Manager which is correct, right?) but that hasn't helped.
It doesn't make a difference whether I use DHCP for everything or just for address only with the Google DNS addresses.
After entering 'lspci' my card shows up as
Code:
Because of a problem with system freezes I have updated to the 2.6.33-020633rc7 kernal but this hasn't had any impact one way or another on wireless speeds.
My router is a Belkin WRT300n.
View 2 Replies
View Related
May 25, 2011
I am new to Fedora 15. I just installed it on my laptop.I have a HP pavillion dv4-1314us with intel core 2 duo.When I try to turn on my wireless, it tells me "firmware missing".lspci -vnn | grep 14e402:00.0 Network controller [0280]: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] (rev 01)I tried using this http://wireless.kernel.org/en/users/Drivers/b43 . I executed the Fedora Part, rebooted and it still doesn't work.
View 4 Replies
View Related
Apr 11, 2011
When I try to connect to the internet wirelessly with Fedora 14 it tells that the wirless firmware is missing. Is there anywayI can fix this or find the firmware for a Dell Wireless 1379 Wlan mini-chip? The Chipset is BCM4315Also my computer is a Dell Inspiron 1545
View 3 Replies
View Related
May 26, 2011
I have Compaq presario laptop.I installed Fedora 15 on my laptop.I can't able to
connect my wireless network.I am getting "Wireless firmware missing".How to resolve this
View 1 Replies
View Related
Jun 14, 2011
I've recently burned Fedora 15 into a CD, in order to install from there onto my computer. However, when boot into Fedora, my wireless doesn't work, instead, it says that firmware is missing.I have had exactly the same problem installing other Linux distros, such as Ubuntu. When I consulted the support at Ubuntu, they were unable to solve the problem. The 'missing firmware' problem is exactly the same in other Linux distros, so I'm pretty much guessing that it's the same problem and is due to my wireless card incompatibility or something.
View 6 Replies
View Related
Aug 11, 2011
Fedora OS: 2.6.38.8-35.fc15.i686 NOtebook: Compaq Presario V3424TU Wireless connection is not enabling and it is showing "Firmware missing" I need to connect wireless to help my final year project.
View 1 Replies
View Related
Oct 10, 2009
I have a mainly windows house with a notebook running Fedora 11. The problem is that when this computer is on the wireless network it shows no computers on the network. It gives me the error that it can't retrieve the shared list from server. However when I am using it on the wired part of the same network it will see all of the other computers. I was wondering if anyone here could shed light on what might be going on. I am not sure if it is a setting on the computer or something to do with the router. However I don't think it has anything to do with the router because I have windows laptops that run on the same wireless access point and have no problem
View 7 Replies
View Related
Feb 24, 2010
I want to make a server that I can log into from my lap top over wireless and access virtual machines, and server terminals. VPN over ssh maybe? Is there a fedora server edition i can use and does it have the required capabilities?
View 3 Replies
View Related
Apr 2, 2010
I am having issues with the setup of my wireless adapter. what I am missing? I have installed
# yum --nogpgcheck localinstall kmod-rt2870-2.6.32.10-90.fc12.i686-2.1.2.0-6.fc12.13.i686.rpm rt2870-2.1.2.0-2.fc12.noarch.rpm
# lsusb | grep -i ralink
Bus 001 Device 004: ID 148f:2770 Ralink Technology, Corp.
#
[Code]....
View 14 Replies
View Related
Jul 19, 2010
Just noticed that the buttons for each open application, normally arrayed across the bottom menu bar, are totally missing. They're just not their, either for open or hidden apps!All I can think of that I've done since the new install is I did download gconf-editor and possibly opened it once, but I made no intentional changes.
View 2 Replies
View Related
Jan 28, 2010
I recently decided to do a dual boot computer running windows 7 and fedora 12. After running disc management in windows 7 and shrinking my main volume down so there was enough unallocated room to install fedora I rebooted and ran the fedora live cd. I then chose the option to install fedora on unused hard drive space.
After all of this I booted up fedora and everything ran great and I have access to all my windows files when I mount that drive. I restarted my computer and tried to boot into windows 7 and ended up with the error "bootmgr is missing press ctrl alt del to restart". Is there any way to recover from this and use windows 7 again?
View 2 Replies
View Related
Aug 7, 2010
I'm using a cross-over ethernet cable to connect a Desktop Windows 7 box, and a laptop running on SUSE 11.2. I want Windows to connect to the internet via the laptop's wireless interface.
View 1 Replies
View Related
Mar 12, 2009
I just installed Fedora 10 on my laptop (HP dv2500 series). I have it dual booting between Fedora and Vista. The laptop has one of those wireless on/off switches and next it the LED: blue - wireless active, amber - wireless inactive. It works fine in Vista but whenever I'm using Fedora it flashes between blue and amber quite fast, stopping on blue for maybe 4 seconds, then flashes again. I am on a constant connection to the network though, no sign of connection loss.
View 1 Replies
View Related
Feb 14, 2010
In F11, I could configure windows to gain focus when the mouse hovers over them ... it was possible to finetune the response in terms of seconds. I dont find the menu item for this function any more in F12 (System -> Preferences ->?) Which package added that functionality and is there a version for F12? I really miss it
just noticed that the windows are already set to respond that way (by default) only that the title bars don't indicate a change in focus.
View 7 Replies
View Related
Sep 13, 2010
I am having a problem trying to install KindleForPc with wine in Fedora 12. Wine installs and runs but is missing a class needed by Kindle. Notepad, regedit, etc run but there is a problem when I run the Kindle Installer.Attempting to install Kindle I run
Code:
wine KindleForPc-installer.exe it runs to completion two windows appears they have a windows look, as it intiializes. Then it returns to the command line prompt. Shortly after it returns to the command line I get a series of error messages. Perhaps the installer finishes and then tries to start Kindle. I have typed their essence below:
Code:
fixme:system:SetProcessDPIAware stub!
class {6e4feb12-510a-4d40-9304-1da10ae9147c} not registered
CLSCTX_REMOTE_SERVER not suppported
no class server could be created for context 0x17
Kindle does not show up in the configuration utility and when I try to run it from the command line it complains that some classes are not registered. My understanding is that yum has a list of the component packages required by wine, and the person who prepared the list thought it had loaded all that was needed for wine, but it did not include the package that has the classes that I need. On the web there are a number of postings that tell how well Kindle works under Linux, and none of them deals with doing anything more than installing wine. I assume that in those cases the install procedure loaded the classes I need. My hope is that someone with more knowledge than I can give me a pointer on how to proceed.
View 2 Replies
View Related
Jun 9, 2009
I have an Thosiba Laptop, with an Seagate 100 GB SATA Hard Disk. I have installed Windows XP and Red Hat on my laptop, and all works fine. I want to remove Windows and Red Hat from the Laptop and only use Fedora, but when I am trying to install Fedora the installation wizard can not detect th SATA Hard Disk. My Red Had sees the HDD as:
[code]...
View 11 Replies
View Related
Jun 23, 2009
I'm trying to make my F10 Laptop a wireless Access point.
When I 'iwconfig wlan1 mode Master' I get:
SET failed on wlan1; Invalide argument.
wlan1 is a Netgear WG111v2 which worked as soon as I plugged it in after I installed F10.
I don't know is it not supported? What is? Is there a different driver I can put on that will work in master mode.
What should I do basically?
View 1 Replies
View Related
