Networking :: Can't Connect Fedora 12 System To Wireless Network
Feb 8, 2010
I'm running the 64-bit version of Fedora 12 on a MacBookPro5,1 system.
I am unable to connect to my wireless network, which shows up in the list of available wireless networks.
I will enter my password and the system will try for several seconds to establish a connection and then fail.
I know the network is fine because I can connect to it when I boot the computer in Mac OS X.
What can I try that will allow me to connect to my wireless network under Linux?
View 4 Replies
ADVERTISEMENT
Feb 9, 2010
I'm running the 64-bit version of Fedora 12 on a MacBookPro5,1 system. I am unable to connect to my wireless network, which shows up in the list of available wireless networks.
I will enter my password and the system will try for several seconds to establish a connection and then fail.
I know the network is fine because I can connect to it when I boot the computer in Mac OS X.
What can I try that will allow me to connect to my wireless network under Linux?
View 1 Replies
View Related
May 5, 2009
I am having a little trouble connecting to my wireless network. Running Fedora 10 32 bit.I'm trying to connect to a hidden wireless network. I updated the firmware for my driver but apparantly the driver is still not working. Broadcom has a driver from their website for Linux 32 bit systems. Should I attempt to install it? I read a post where the driver is built into the system kernel. If so I would need to blacklist the one of the drivers. Correct?
[justin@justin ~]$ iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wmaster0 Interface doesn't support scanning.
code....
View 7 Replies
View Related
Sep 11, 2010
I picked up a cheap PC the other day for �20 and it came with a Belkin N Wireless USB adapter. I know the adapter works because Windows XP was originally installed and I could connect with no problems. I wasn't able to connect when I installed Kubuntu so I thought I'd see if I could have any more luck with Fedora....so far, not so good! I realise that this is a fairly common problem, especially for this USB adapter, but I've tried dozens of threads here and elsewhere and still can't get Fedora online.I can see the wireless networks in the list, but if I try and connect then I just repeatedly get asked to enter the authentication details, which I know I'm providing correctly.
View 9 Replies
View Related
Aug 12, 2011
I have upgraded to Fedora 15 but cannot get wireless up and running. When i switch on wireless and choose the connection it tries for 15 seconds before prompting me for the password and continues like this. When i check the device in my network config it shows as being inactive. Ralink device 3060
View 6 Replies
View Related
Jan 31, 2011
How to make my fedora 8 be able to connect to the internet by using wireless network ?
View 5 Replies
View Related
Apr 29, 2011
F14 did not recognize my wired or wireless NIC upon installation. I have enabled network manager, what should I do from here? Here is my hardware specifications:
Network controller: Realtek Semiconductor Co., Ltd. Device 8176 (rev 01)
Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05)
View 11 Replies
View Related
Aug 12, 2011
I am trying to get a wireless connection on my laptop. The OS is fedora minimal (without GUI, Without gnome). So I need to be connected on my Access Point, which has an hidden SSID on WPA2-Enterprise.
View 2 Replies
View Related
Jul 10, 2009
I am fairly familiar with Linux but had never ventured into Wlan settings / options / too much. I have compatible card (aetheros) and when running - iwlist wlan0 scanning - I get plenty networks showing up - meaning the card works. When I installed distro which is last night (before I ran update), I had that little bars menu at the top of the screen that showed available networks once clicked upon. Since I like to modify and make my settings better - I removed that little AT&T like bar, and now rebooted after update to find that I can not see available networks unless I use iwliset wlan0 scanning.... .#$*&)@&#(&%# - need I say more.
Two questions - how do you connect to the wireless network via command line? What is that vertical bars GUI tool called so I can find it and run it again? Is there (for the love of god) alternative to system-config-network GUI managment tool for wlan?
View 2 Replies
View Related
Aug 17, 2009
I'm tryn' to connect to my wireless network using command line:iwconfig wlan0 essid MY_NETWORK as root.
After this typingiwconfig wlan0
result is:
wlan0 IEEE 802.11g ESSID:off/any
Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated
Bit Rate:1 Mb/s
[Code]....
I installed ndiswrapper in order to use ipn2200 WinXp drivers.
View 4 Replies
View Related
Sep 4, 2011
running Fedora 15 on a Dell Inspiron 1521. When I first installed Fedora on this laptop, I was unable to connect to a wireless network because I did not have the firmware installed, so being a good little enthusiastic new user of Fedora, I set out on a quest to locate the proper firmware. I had success on that front, however, in the process of installing it, the option to connect to any wireless network disappeared. It isn't that there is no wireless network in range, rather, the entire wireless option itself has vanished.
View 3 Replies
View Related
Feb 11, 2010
I installed the 64-bit version of Fedora 12 on my MacBookPro5,1, and I am unable to establish a connection to my wireless network, which I can connect to fine with I boot the computer into Mac OS X. Here is my operating system information:
Code:
$ uname -a
Linux tosh 2.6.31.12-174.2.3.fc12.x86_64 #1 SMP Mon Jan 18 19:52:07 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux
Here is information about the PCI devices available on the system:
Code:
$ lspci
00:00.0 Host bridge: nVidia Corporation MCP79 Host Bridge (rev b1)
00:00.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
00:03.0 ISA bridge: nVidia Corporation MCP79 LPC Bridge (rev b3)
[code].....
View 7 Replies
View Related
May 6, 2010
I have just installed FC12 on my machine - and gone Windows free for the first time ever. Now I do use various flavours of Linux on a daily basis but not from an installation/sys admin point of view so my questions here may seem a little basic but pleas eindulge me if you will!
Now, my network connection works perfectly well under the following scenarios.
1) FC12, wired to router
2) FC12, wireless, SSID broadcast enabled
3) Ubuntu (laptop), wireless, SSID broadcast DISABLED
The only scenario that does not work is FC12, wireless with SSID broadcast disabled.
I can only assume that it is an issue with my USB modem (a linksys WUSB54GS) since the same set-up works fine from my laptop running Ubuntu with an internal wireless card.
Now, I know from reading the forums that it's pretty easy to get around a disabled SSID broadcast but this is an itch I just have to scratch....what the hell is causing this problem?
nm-tool ouput is as follows:
I have tried using wpa_supplicant but I am not sure which driver I am using here - is it ndiswrapper per chance?
(Driver: rndis_wlan)
How I can connect once again to my wireless router with SSID broadcast turned off.
View 5 Replies
View Related
Mar 12, 2009
I've FC10 installed. After updating a few days back, I'm unable to use Network Manager to connect to the net through my USB Modem. All the threads I've read say to do
Code: yum update NetworkManager but how can I do it without net connection? Can anyone post the exact link of the Network Manager's latest and BUG-FREE rpm so that I can directly run it?
View 10 Replies
View Related
Dec 8, 2009
I have a Broadcom Corporation BCM4312 802.11b/g (rev 01) wireless card. I installed these packages:
broadcom-wl-5.10.91.9.3-1.fc12.noarch
akmod-wl-5.10.91.9.3-3.fc12.6.x86_64
kmod-wl-2.6.31.6-145.fc12.x86_64-5.10.91.9.3-3.fc12.8.x86_64
[code]....
uname -a says:
Linux boz.alafkhar 2.6.31.6-145.fc12.x86_64 #1 SMP Sat Nov 21 15:57:45 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
and:
# lsmod | grep wl
wl 1278432 0
lib80211 6436 2 lib80211_crypt_tkip,wl
[code]....
My networkmanager understands that the card is installed. But it can not find any network. Also iwlist scan gives me no result. I did not have this problem on earlier fedora releases. Recently I upgraded to F12 from F11. I should mention that I have another USB DLink wireless card and when I plug it, everything works fine with that card. I also tested wl_apsta driver using fw-cutter. I did not work neither.
View 6 Replies
View Related
Sep 1, 2010
This may fall under the "ain't broke don't fix it" category but it's driving me nuts. I've got the Broadcom 4322 wireless adapter in my laptop and it works fine with broadcom-wl driver and kmod. However there is no ifcfg-eth1 file and the card does not show up in system-config-network.
View 2 Replies
View Related
Jun 17, 2011
The problem with my wireless network. I have Dell DV6 Pavilion 2115 eg laptop and i installed Ubuntu 11.4 and internet and wireless worked, until i reboted my system it has disapear. I cant no longer to connect to a wireless network. It dont shows me any wireless network. My wireless card is Atheros AR 9285 802.11b/g/n Wifi Adapter
View 9 Replies
View Related
Mar 16, 2011
I have configured my system to connect to a wireless network on bootup, but now every time I boot I have to wait and watch it connect (it outputs some dhcp connect stuff) which delays the boot process. is there any way to just initialize the script and then go on with the boot process instead of letting it output some pointless crap and waiting for it to end?
View 5 Replies
View Related
Sep 15, 2011
wifi card:atheros ar5007egOS: openSUSE11.4My laptop can't connect on network after system hibernate. It has been asking me for enter the wifi password. But when I input the wifi password it still can't connect on network. I have to reboot it.
View 3 Replies
View Related
Jul 27, 2010
I just switched from Ubuntu to Fedora 13 because I was unable to get Ubuntu to connect to wireless networks. I tried everything suggested in help and forums, and kept getting "Bad Password" with WICD and Network Manager. Now, with Fedora...I still can't connect.
Problem #1: The guide says to "...make sure that the relevant wireless interface (usually eth0 or eth1) is controlled by NetworkManager," and that I do this via: System>Administration>Network
However, there is no Network option under System>Administration.
Problem #2: I open Network Manager, which displays a list of networks. I click on mine, configure it with WPA and the right password, and it fails to connect: "The network connection has been disconnected."
View 12 Replies
View Related
Feb 27, 2009
Kernel: 2.6.27.15-170.2.24.fc10.i686
WLAN: Broadcom BCM4311
Problem: I run WPA2 Personal encryption on all my wireless devices. At work we use Cisco WAPs and I can connect flawlessly, simply by entering the password. At home I use Apple's Timemachine, which is basically an Airport Extreme A/B/G/N router.
I go to Network Manager and choose "Connect to Hidden Wireless Network". I enter in the SSID of my home wireless, choose WPA2 Personal, and enter in the password. After ~1 minute Network Manager spits back a window requesting the WEP key.... But I'm not running WEP. This is extremely frustrating. I delete the network and try again... same behaviour. My assumption is that this may be isolated to Airport Extreme network devices but I'd really love to find a fix. Just FYI: I have a MacBook Pro and a system running Vista that connect without a hitch.
View 14 Replies
View Related
Feb 4, 2010
On my laptop HP presario, I installed Ubuntu 9.10 (Wubi). My Windows Vista connection works fine, but the Ubuntu cannot find my wireless network. My network card is the Belkin Wireless N (F5D8233-4v3). Do I have to use the ndis. On my desktop here, (wired) Ubuntu found my card without me having to do anything. What should I do. (unistall ubuntu and make do with Vista?)
View 3 Replies
View Related
May 9, 2010
I have installed the driver for my usb network adapterIt sees my adapter fineI see my two routers .....i have both a dsl routher and a router conntected to my cable modem ...it says signal strength of 90I see my neighbors network as well but when i try to connect to either of my routhersit will not let mei use WEB ... 128 bit..it asks for the passpharseit says it is activating....and the after a few minutes the same window back up againi know my pass phrase is correctwhen i reboot in windows ...everything works fine ...no problembut in 10.04 i can not connect to any networkwhat am i doing wrongI re entered my pass phrase a 100 times
View 4 Replies
View Related
May 15, 2010
I upgraded from Ubuntu 9.10 to 10.04 this morning, and I can't connect to my wireless network. The Network Manager shows it's there, with the correct SSID and security key and everything, yet it still won't connect. I'm using a D-Link DI-524 Wireless Router that I've never had any problem with before.
View 9 Replies
View Related
Apr 3, 2011
I'm having a little issue here with my laptop. I've installed Ubuntu 10.10 Maverick/Meerckat on my Lenovo Thinkpad T61p about 3 hours ago and it can't seem to connect to the wireless network... I've had the same problem when I moved from Windows to Ubuntu on my desktop but I've been able to fix it completely. The thing is I can't remember how I fixed it :S So, I updated my system, downloaded the additional drivers. Also, I cna connect to the ethernet network. To fix my desktop, I used some command lines that someone posted in a thread about the wireless keeping disconnecting... I just can't find that post though :S What I remember about the post was that there was someone who had posted a thing with like a parabolic thing around he wireless adapter (LOL)
View 2 Replies
View Related
Apr 12, 2011
I have dell inspron n4030 but i can't connect to wireless network to download other drivers and programs, that's easy in win7
i need the network card driver for ubuntu 10.10 where i found it?
View 7 Replies
View Related
May 7, 2011
Earlier in the week, I installed 10.10, but had awful problems trying to get the wireless networking working. Upgraded to 11.04, and wireless is sort of working. However, I am unable to connect to my wireless network. It sees the network, but just keeps asking me for the password. I enter this (I have checked that it is correct), but it just prompts again, after a little while. Networking through network cable works fine.
Wireless network is set up to use WPA-PSK + WPA2-PSK. I have checked, and I do have wpa_supplicant loaded.
Code:
Machine: Compaq Presario R3000 (R3363EA)
lspci | grep -i net
00:14.4 PCI bridge: ATI Technologies Inc IXP200 3COM 3C920B Ethernet Controller
02:02.0 Network controller: Broadcom Corporation BCM4303 802.11b Wireless LAN Controller (rev 02)
[Code].....
View 9 Replies
View Related
Jun 28, 2011
I upgraded to Ubuntu 11.04 from 10.10 a couple of days ago and now I cannot connect to my wireless network. I can see all the networks and I managed to connect to something called BTopenzone, just to see if I could connect to anything, and that worked. I also run windows 7 on the same computer and setup and it connects fine to my wireless network. Before I installed the Ubuntu upgrade I could connect without any problems. I've had a look at the settings for the connection in Ubuntu but I don't understand them.
My router is a dlink dir-655 My receiver is a edimax ew-7711uan wireless usb adapter
View 1 Replies
View Related
Jul 28, 2011
Hey I just installed linux on my computer and it will not connect to any wireless networks, it will detect them and say try to connect but for some reason wont. It does connect just fine to a wired network.
View 1 Replies
View Related
Mar 19, 2010
Can anyone provide me the details how to connect my laptop with centos5.3 to connect to a wireless network.
View 1 Replies
View Related
