I'm at wits end...10.04 won't connect to a wireless network on my laptop, and that sort of makes it useless. What is the easiest way to revert back to 9.10? I have a dual-boot system with XP and I'd rather not have to start from scratch.
View 2 Replies
I have Windows XP with a gigaset adapter which connects to wirelessly to a Belkin router. I'm with Virgin Media.
I installed Wubi Ubuntu to try it out, and it all worked perfectly accept no wireless networks, not even nextdoors were listed.
It's enabled but it says it's disconnected. I have no idea what to do.
Is it recognizing my adapter?
On Opensuse 11.2, I would like to connect my ipod touch to a wireless ad-hoc network of my laptop. I have no wireless WIFI-router at home, so I have to use the laptop as a router to the internet. I know I have to enter a static IP adres and my router's address, but where ? I haven't found any place under network tools to do this, only saw some fields with SSID's and MAC addresses to fill in.
View 5 Replies View RelatedCan anyone provide me the details how to connect my laptop with centos5.3 to connect to a wireless network.
View 1 Replies View RelatedI have fedora 13 installed in my laptop lenovo G450.
Inside the file networking-scripts I can find the ifcfg-wlan0.
But it can't find any SSID when I scan the network.
I tried operating manually also.
But it can't be connected to any network.
The wireless device is also powered on.
But I am not able to connect to the wireless network.
I have ASUS Laptop A6Rseries was running XP untill I installed Linux 9.10. Now i am having problem connecting to my wireless network. I am using Belkin router what works fine with XP, Vista and Windovs 7. Here is some information what I found
lspci
00:00.0 Host bridge: ATI Technologies Inc Device 5a31 (rev 01)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
[code]....
This will allow you to use iphones' data plan as a wireless access point. Currently setup instructions are only posted for windows/mac using a helper app to configure the laptop. Here are the instructions I followed to setup iphonemodem2 to work under Fedora 10: Download iPhoneModem2 from a jailbroken iphone using Cydia. Create a new wireless network on Fedora with the following settings:
a) SSID = "iPhoneModem"
b) Mode = Ad-hoc
c) IPv4 Method = Automatic (DHCP)
Connect laptop and iphone to new wireless network. Start iphonemodem app on iphone. The "traffic" does not update; the "status" says "Wrong Wifi Network"; and the signal strength says 0%. However, the network connection should be there as long as you have a data signal to your service provider.
I've just installed Squeeze on my laptop (Toshiba Satellite C660D - adapter is a Realtek 8188CE) and was following the instructions on debian.org to set up WiFi. I've changed the source list, done the firmware update and the modprobe, but when I get to step 5 where it says to verify that I have a wireless interface, the output from iwconfig just lists lo, eth0 and pan0, all with "no wireless extensions". Does anyone have any ideas what I should do now?
View 7 Replies View RelatedMy wireless (Toshiba laptop, 10.04 64 bit) is just hanging when trying to connect. It was working fine but now nothing. My Wireless antennae is on and my other laptop can connect with no problems. I have restarted the router and the laptop twice.
View 1 Replies View RelatedI just bought this usb wireless adapter. (I also have a mac using wireless here and it works fine.) I installed ndiswrapper and ndisgtk and then used it to open the .inf file on the driver cd that came in the box. It must have worked reasonably well because if I click on network manager, I can see a number of networks, including my own. However, when I enter the security key for my network the icon spins for a while and then it asks for the key again. I've tried repeatedly and it never connects. I am definitely entering the key properly because I re-entered it on my mac and it worked.
I have attached a document with most of the information requested in the sticky.
When i click the button to connect to a wireless network this message apears:Network management disabled
View 1 Replies View RelatedI can not get NetworkManager to handle my Huawei E220 usb modem. I have searched forums and tried a lot of things. I have just upgraded from openSUSE 11.2 to openSUSE 11.3 using zypper. It seems to work fine except that umtsmon stopped to work, so for now my laptop has no connetion to internet at all. Here are some information about my settings:
I have used usb_modeswitch to make the device a modem. Am I right if I say that usb_modeswitch is a one time command, or does it swap the setting each time it is called? Anyhow lsusb states that the device is a modem. (All the time.) code...
I've got an Acer Aspire One. I don't like windows. I have used Ubuntu many times in the past and love it. I want to install it on this thing, but it's as minimalist a computer as it gets. No DVD drive or anything. It weighs about as much as a small bottle of soda. I have no access to USB Drives, External DVD drives, External floppies, external anything. I do have a cat but I don't think that's going to help. In fact, he's trying to step on my keyboard Anyway, I know you can do a "Frugal install" off the hard disk but I have absolutely no idea what it is.
What exactly is a frugal install? Can I partition the hard drive and leave my windows alone (Got some data, programs and porn holding me down) with a frugal install?Is there a difference between a frugal install and a fancy high-tech DVD install when it's finished (E.G Limitations, stability, chances of computer asploding)?
Fed up with Windows and ready to become a Linux convert. Here's the only problem:
I've created no less than four separate Live USB distros - all using different USB sticks -
yet my HP Pavilion dv7 refuses to recognize any of them as "bootable devices."
1) Have formatted USB sticks in FAT16 & FAT32 - neither made a difference.
2) Have created bootable USB sticks using Ubuntu Minimal Live install; Ubuntu full Live install; PuppyLinux Live install; even a simple gparted live install - none will boot.
3) Have checked & re-checked that BIOS is set to boot first from USB drive device.
4) 2 of the 4 USB sticks are new, fresh out of the packaging; and 3 of the 4 USB sticks are each from different manufacturers - so I'm fairly certain it's not a issue of a particular brand being incompatible, nor is it due to the sticks being corrupted somehow.
5) Each of the 4 live distros appears to have downloaded just fine - all necessary files appear to be in order.
6) Have tried using Unetbootin, Ubuntu's own live usb tool, and 1 or 2 others - all have failed to boot my HP laptop.
7) Have even tried removing all non-essential hardware before booting - even booting with no hard drives installed - system still returns the error "no bootable device detected."
This laptop is only 2 years old; I know it should be able to boot from USB. I can boot from a (rather old) SliTaz distro on CD just fine - but I need a persistent USB stick so I can easily add packages as needed, etc...s.
When I firsts installed Ubuntu 10.04, and tried to hook it up to my wireless network it noticed my connection and accepted my password, but did not connect. My wireless card doesn't have linux drivers installed. I found the correct drivers, but I am unsure of the correct way to install them in Windows so they work in Ubuntu. I am currently dual booting Windows 7 and Ubuntu.
View 9 Replies View RelatedI'm a new user of Ubuntu, so i'm not that familiar with this OS. My wireless network is detected but when I'm entering my 128 bits WEP key, it doesn't connect at all. I have no clue where to start troubleshooting.
Here's some of my specs if that's of any help:
Computer is a Sony Vaio laptop model VGN-SZ370P
My wireless card is from Intel Corporation 82801G (ICH7 Family) USB UHCI Controller
The ethernet cable connection used to work before, but I fooled around with some commands and now seems to be disabled...
I'm try to setup a wireless network with my linksys wireless router and my HP laptop dual booting Vista & Suse 11.2. I have the vista networked, just fine. Where I can share files and the printer connected to my desktop. But I want to be able to use Suse in the same way, full time and to stray away from Vista. My wife and kids like easy. So I'm trying to transform them and show them something new.
View 9 Replies View RelatedI just installed 10.04 on an Acer 4736 laptop and was prompted for a software update of about 170 MB.
I went through with the update downloads and installation, got an error message of some packages not being found, and clicked on the "close" button on the dialogue to finish with the whole thing.
Now the Update Manager window with the grayed-out package updates didn't go away, and the cursor would always show the "busy" circle thing. I waited for a while, but nothing happened. I tried opening Firefox to check for anything about this on the net, but it wouldn't open.
So I left it alone, and it the screen went black (screensaver, I guess). When I tried to get back to the desktop, I couldn't. Screen wouldn't respond and it stayed black; no password prompt or anything.
Ctrl-Alt-Backspace wouldn't take me back to the login screen either.
That is what I do to connect to Xbox Live and I just got an Insignia Blu-ray player that can only connect to BD-Live through an Ethernet connection, so I was wondering if I could apply that same concept to my Blu-ray player.
View 1 Replies View RelatedI did a clean install of Ubuntu 11.04 from a cd over windows and Ubuntu 10.04. The hardwire internet works but not the wireless.
compaq presario m2010us Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
I run Ubuntu 9.04 on a Toshiba NB205. I am suddenly having trouble connecting to the internet using my router or my cable modem for that matter. The weird thing is that I can:(1) connect to other networks just fine, and(2) my router/internet connection work fine when plugged into my desktop.I can't connect whether I'm plugged in with the ethernet cable directly from my modem or from my router, although both work fine when plugged into my desktop. Basically two green lights show up on networkmanager but it doesn't go from there to connecting.So the usual troubleshooting of moving the wires around and trying to connect like that just suggested that my laptop doesn't connect on the one router/internet connection that I happen to need.
sudo ifconfig
gives:
eth0 Link encap:Ethernet HWaddr xxxxxxxxx
[code]....
I have recently installed Ubuntu lucid lynx and at my old house I had a regular cable modem (no wifi) and never used wireless internet. I would simply unplug the ethernet from the windows desktop plug it to my laptop and I was good 2 go.have recently moved and my roommate has a cable modem w/ wifi capabilities. When I plug in I am told that I am connected but......Nothing. dont know if the problem is due to the modem having wireless capabilities when my old one did not or the fact that my roommate has a win7 laptop that is connected via wifi etc. There have been a FEW times that I have walked out plugged in and everything has ran well. when I do plug in I look under connection information and I am told that I am connected at 100Mbps but whenever I try to visit a page I am out of luck. I define newbie (as far as Linux distros) and I have tried everything including going to work w/no sleep because I'm going through massive trial & errors
View 10 Replies View RelatedThe problem with my wireless network. I have Dell DV6 Pavilion 2115 eg laptop and i installed Ubuntu 11.4 and internet and wireless worked, until i reboted my system it has disapear. I cant no longer to connect to a wireless network. It dont shows me any wireless network. My wireless card is Atheros AR 9285 802.11b/g/n Wifi Adapter
View 9 Replies View RelatedI wireless network card is Broadcom Corporation BCM431, but is doesn't work after I update kernel from
2.6.29.6-217.2.7 to 2.6.29.6-217.2.8.
Linux localhost.localdomain 2.6.29.6-217.2.7.fc11.x86_64 #1 SMP Fri Aug 14 20:53:08 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
I'm trying to install Ubuntu 10.04 on my Toshiba A200-12U laptop (with an Atheros AR5007EG wireless card), but networking is being problematic.I entered Network Configurations and tried to get 'Auto eth0' working -- I went to Edit > IPv4 settings and filled in 'Addresses' with the details of my connection:
Address: 192.168.1.254 (the local IP of my router)
Netmask: 255.255.252.0
Gateway: 94.195.208.1
[code]....
I'm not exactly sure if this should be here and not in the Hardware & Laptops section, but seeing as my only problem is with WiFi, I'm guessing this is the right place. Under Ubuntu, my laptop (an Asus K42Ja, more details below) can see wireless networks normally. However, when I attempt to connect, it fails to establish a connection. Under Windows on the same laptop (dual boot), no problems are experienced.
According to this, there's a firmware bug in my wireless chip which causes connections to get dropped. I'm not getting connections at all, but I still tried the workarounds on that page with no luck. The router is a TP-Link TL-WR340G. My previous laptop, a really old one from 2003 running Ubuntu 9.10 was able to connect to that router without problems. The wireless card was Intel on that as well (but, of course, much older). The router is set up to use WPA for security. I didn't use WPA2 as I read something a while ago about problems with WPA2 and some Linux distros. Please correct me if I'm wrong here.
If anyone's curious, I'm posting this on Ubuntu, via an ethernet cable to the router mentioned earlier. Some tasty technical bits: dmesg (the latter half of the "timed out" messages is me retrying after double-checking the WPA key)
[Code]....
at start, knetworkmanager detect wireless network, but doesn't automatically connect - I have to restart it to make it work properly. Instead, it gives that error:
[Code]...
I've got openSUSE 11.3 running via liveUSB on a netbook and no matter how many times I try, I cannot get wireless to connect to my network.
My network is:
- non-broadcast
- WPA2 Personal
- G
The netbook is fairly recent from Asus and wireless works perfectly with Fedora 11 and Windows XP.
I clicked "Network Settings", and I found that the ip address was wrong, which is "192.168.1.10/24", and netmask field is empty, so I modifed the configuration file located in /etc/sysconfig/network, named ifcfg-wlan0, added one line(NETMASK= '255.255.255.0'), saved it and reboot the system. After rebooting the system, I still found the ip address is wrong and netmask field is empty, so I have to use ifup command to activate my card manually every time the system starts.
View 1 Replies View RelatedI've got my Lenovo T60 laptop wireless running without too much trouble, the only problem is when i close my laptop lid and open it again the wirelessconnection is down and i simply cant click on the network icon in the notification area to re-connect as wlan0 is inactive. If i go to System>admin>network i cant activate the interface either as the 'active' button is greyed out, the only way to get the thing to come alive again (other than a full reboot) is to toggle the wireless switch on my laptop off and then back on.Not sure this should be required, i've got the interface configured to start automatically but it doesnt seem to care.
View 4 Replies View Related
