Fedora Networking :: Wireless-G USB Network Adapter Setup For 12
Jul 14, 2010To setup a Compact Wireless-G USB Network Adapter (WUSB54GC) on Fedora 12 ?
View 1 Replies
ADVERTISEMENT
Ubuntu Networking :: Belkin F5D7050 Wireless-G 54Mbps USB Network Adapter Setup?
Apr 13, 2011I recently installed the latest and greatest Lubuntu 64 bit, because I like lxde and I am planning a system migration. (I am really starting to not like windows 7.) I have some linux experience. I wouldn't say I am awesome at it, but I am comfortable trying anything.
Example: I have used CENTOS 5.6 to make a linux machine server as a glorified router, with asterisks, SIP, SSH server, x windows, GNome, VNC, and a user authentication system. and get this I walked somebody through setting this up over the phone. I reopened the root account (I honestly got tired of typing sudo every other command is the only reason why I opened it.) I plan on closing it after we are done.
lsusb lists the wireless adaptor
Wireless Card Link
[[URL]
I have the driver CD. I installed ndiswrapper.I copied the files from my driver cd to my <home> Directory. Then installed the Windows XP version of the drivers using ndiswrapper -l <driver>. I then made ndiswrapper force the driver to the vendor ID of the wireless card. Using ndiswrapper -a <vendor ID> <Driver>(I did this last night and the vendor ID escapes me. I am at work now.)I finally ran depmod -a and modprobe ndiswrapperI goto the windows wireless driver application, and it shows the driver as loaded and the hardware as found.
However, it still does not list a wireless device in the network manager to where I can connect to my wireless. iwconfig does not show any wireless LAN, but it is still listed in lsusb. Also, the light that shows activity on the wireless device does not light up or blink at all. I have about 6 usb ports on my desktop and have tried everyone. The wireless card also works in Windows 7 64-bit On a strange side note. I do have internet access through LAN, (My laptop is atm a glorified wireless card .)
Fedora Networking :: Setup A Wireless LAN Using A Zdyas Zd1211 USB Adapter
Mar 16, 2009I am trying to set up a wireless LAN using a Zdyas zd1211 USB adapter. I downloaded the .tar file, uncompressed it, then used make and make install. I then loaded the driver using modprobe -v zd1211. I have some questions:
A) After I performed all this, when I ran the Network Configuration Window, I can't find the Zdyas zd1211 driver in the list of supported wireless cards. Is there a configuration file I should edit to add this driver to system-config-network?
B) To which files should I add the modprobe, ifconfig and iwconfig commands or values so that the driver is automatically loaded and configured whenever I reboot the computer?
C) I am using FC8. What package supports the wpa supplicant?
CentOS 5 Networking :: DWA-110 Wireless USB Adapter Setup
Oct 6, 2009I have D-Link DWA-110 wireless usb adapter.
$/sbin/lsusb
Bus 001 Device 002: ID 07d1:3c07 D-Link System Wireless G DWA-110 Adapter
Red Hat / Fedora :: Can't Setup Of Wireless Adapter
Apr 2, 2010I am having issues with the setup of my wireless adapter. what I am missing? I have installed
# yum --nogpgcheck localinstall kmod-rt2870-2.6.32.10-90.fc12.i686-2.1.2.0-6.fc12.13.i686.rpm rt2870-2.1.2.0-2.fc12.noarch.rpm
# lsusb | grep -i ralink
Bus 001 Device 004: ID 148f:2770 Ralink Technology, Corp.
#
[Code]....
Fedora Networking :: Atheros AR2413 FC10 - D-Link Wireless Adapter Worked Fine With Network Manager Disabled
Mar 3, 2009I have been running FC8 on this IBM T23 with a D-Link wireless adapter. Using MadWifi this has worked fine with Network Manager disabled. But now I have nuked that installation and replaced it with FC10. Network Manager is nice, and I would like to use it. And it kind-of works. Network Manager recognizes my router and all my neighbor's routers, but I can't connect.
[Code]....
Ubuntu Networking :: Get Wireless Network Adapter To Be Read By 'Windows Wireless Drivers'
Nov 24, 2010I recently reformatted and dual partitioned to both Windows 7 as well as ubuntu 10.10. Loading works fine and Windows 7 is 100% operational. I cannot seem to get my wireless network adapter to be read by Ubuntus 'Windows Wireless Drivers' gui. Here are the steps that I have done THUS far, to make sure that we are all on the right path. Before I go any further, my wireless network adapter is an old school WUSB11 Linksys Wireless Network Adapter (running version 2.6).
1) Downloaded and installed "ndiswrapper" from ubuntu's main website. I downloaded the common, utils and ndisgtk files and installed them accordingly.
2) I extracted these three files to the desktop of Ubuntu and accessed the terminal page.
3) From terminal I typed "cd Desktop" to change the directory to the desktop.
4) Next, I typed in "Sudo dpkg -i ndiswrapper-common_1.54-2ubuntu1_all.deb
Sudo dpkg -i ndiswrapper-utils-1.9_1.54-2ubuntu1_i386.deb
Sudo dpkg -i ndisgtk_0.8.5-1_i386.deb"
5) This installed Windows Wireless Drivers gui successfully and I can access it.
6) I have downloaded the driver files for the adapter from the cisco website and searched them for the required files needed.
7) After extracting the .INF file from the "Drivers" directory named "NETUSB.SYS" (I wasn't sure if the other associated files within the same folder needed to be present together with NETUSB so I moved everything to the desktop) I typed in "sudo ndiswrapper -i NETUSB.inf". After accessing the Windows Wireless Drivers gui I have noticed that the 'netusb' driver is present yet under it, the system states "Hardware present: No". This leads me to believe that maybe I installed incorrectly or my "fireware?" is not present? I was reading through the installation guide posted on the ubuntu website that in addition to the .INF file we also need the BIN file(s)? and SYS file(s)?.. The folder with the drivers for my adapter contains a BIN file but it is not within the "Drivers" section of the folder.
9) Upon mousing over the network Icon naturally my hardware is still not present.
10) From what I gather after the system finds the hardware I am to write into the terminal
[Code]....
Ubuntu Networking :: Wireless Unstable In 10.04 - AR5001 Wireless Network Adapter
Aug 30, 2010I am severe wireless problems with Ubuntu 10.04 on my laptop.(Spec below)
I have just performed the first clean install since new. Installed a new Hard Drive as well. The machine and wifi was fine under Ubuntu 9.04.
It is booting much faster now but the wifi keeps dropping off.
Spec:
Machine - Acer Aspire 4310
Wireless card - *-network
description: Wireless interface
product: AR5001 Wireless Network Adapter
vendor: Atheros Communications Inc.
[Code].....
Ubuntu Networking :: Belkin Enhanced Wireless USB Network Adapter - Windows Wireless Drivers App Doesn't Work
Feb 3, 2010I have a Belkin Enhanced Wireless USB Network Adapter Model # F6D4050 v2. The drivers are for windows but the windows wireless drivers app doesnt work. I see a tutorial for a linksys that appears to have the same chipset, but I am not sure if any of the steps need to be modified, also my kernel is a bit different. Here is my kernel:
[code]...
Ubuntu Networking :: Wireless Adapter Cannot Connect To Any Network
Aug 31, 2010I have an HP Pavilion dv5 1002nr laptop running Vista. I decided to install Ubuntu using the windows installer, which did install well, but I decided that it wasn't for me, and uninstalled it. Now, my wireless adapter which is a Atheros AR5007 802.11b/g can see the network, find networks by itself, and is supposedly installed correctly according to Vista, cannot connect to any networks at all despite being able to see them and acquire a signal strength. Up until installing Ubuntu I have never had an issue like this. Other devices have no trouble connecting to this network, and I am currently using a Netgear wireless usb dongle to connect to the very network that my Atheros can not connect to.
View 2 Replies View RelatedUbuntu Networking :: Will The Xbox 360 Wireless Network Adapter Work?
May 17, 2010How do i get my xbox 360 wireless adapter to work on ubuntu?
View 2 Replies View RelatedUbuntu Networking :: Can't Detect Network On AWU212N Wireless Adapter / Fix It?
Jul 9, 2010I just got a new AZiO AWU212N 802.11n wireless usb adapter (linked below). One of the product reviews said that it works with Ubuntu if you upgrade to the .34 kernel so I thought it would be a good buy. I updated my kernel and Ubuntu detects that there is a wireless adapter, but doesn't detect any networks. My old wireless-g adapter can connect just fine, so I don't know what the problem is.
http://www.newegg.com/Product/Produc...82E16833340018
Ubuntu Networking :: Installing A PEX300WN2X3 Wireless Network Adapter On 10.10
Feb 15, 2011I am trying to install a Star Tech PEX300WN2X3 wireless card but I'm completely lost. The installation Cd has 2 tar. files with the linux drivers but I'm just clueless as to what to do with them.
View 9 Replies View RelatedUbuntu Networking :: TP-Link Wireless Adapter (USB) On 11.04 - Not Connecting To Network?
May 19, 2011i just installed Ubuntu 11.04 64bit on my desktop. i have a TP Link TL-WN321G (Ver 4.0) wireless usb adapter to connect to my wireless network (i used to use it with Windows XP).As expected (i'd read up a bit before installing Ubuntu), the adapter was autodetected - i could see my wireless network listed in the networks list dropdown, and lsusb showed it too.lsusb identifies "Bus 002 Device 002: ID 148f:2070 Ralink Technology, Corp. RT2070 Wireless Adapter"But i cannot connect to the network. When i select my network, it keeps trying to connect, but never succeeds in connecting.
i tried going through the forums for possible solutions, but most of them deal with how to get it working when the adapter is not detected, or when networks are not shown. Or they are for older Ubuntu versions.i use the same wireless network on my laptop (Ubuntu 9.04), and it has a WPA & WPA2 Personal security, with a password, which i've configured in the desktop as well.
Ubuntu Networking :: Put USB 54Mbps Wireless Network Card Adapter Into Studio- 64 Bit?
Apr 20, 2010May I put a USB 54Mbps Wireless Network Card Adapter into Ubuntu Studio- 64 bit, does the 64 bit Ubuntu Studio (9.10) support this usb wireless network card adapter? how to let it work in Ubuntu Studio 9.10
View 8 Replies View RelatedUbuntu Networking :: Rt73usb In 10.04 - No Wireless Adapter Shown In The Network Manager
Jun 25, 2010I recently upgraded from Ubuntu 9.10 to 10.04 (both 64-bit) and my USB WiFi adapter which previously worked fine stopped working. The adapter is a Hama USB stick based on the Ralink rt73 chipset. I've tried using the Ralink drivers that come with 10.04 (both rt2800usb and rt73usb) but neither work. When I use rt2800usb, the adapter is recognized as interface wlan0, however I can't see any wireless networks. When I use rt73usb (and blacklist rt2800usb to avoid conflicts) I no longer have a wlan0 interface and there is no wireless adapter shown in the network manager. I've pasted in the results of lsmod, lsusb, and ifconfig -a (with MAC addresses removed) below.
[Code]....
Ubuntu Networking :: Atheros AR5001X+ Wireless Network Adapter (rev 01) Not Working
Mar 3, 2011I have a Toshiba MX35 laptop it's a little old but does the job. I'm have a problem getting the wireless to work. I can boot a live CD either Ubuntu 10.10 or Fedora 14 and they will see the wireless card. The card is Atheros Communications Inc. Atheros AR5001X+ Wireless Network Adapter (rev 01).
I have Ubuntu 9.10 installed and that is the OS that is having the problem seeing the wireless. The computer will not handle Ubuntu 10.10 (at least it won't handle the desktop effects under Ubuntu 10.10) but handles them just fine under 9.10 and that's why I have 9.10 installed. I really need the Wifi to work because I'm going to travel in a few days.
Fedora Installation :: Wireless Network Configuration - B43 Adapter Grayed Out
May 9, 2009I am doing network config of my laptop. I'm new to Fedora, so I'm not sure how it goes ...
I have an Ethernet device (eth0) and a wireless device, wlan0
Status in system->administration->network:
Tab devices:
eth0 : active
wlan0: inactive
Tab Hardware:
eth0: system
wlan0: configured (description: b43)
Double clicking on the wlan0 line gets you to Network Adapters Configuration, where adapter b43 grayed out) is associated with device wlan0. So far, so good (I did all the fwcutter stuff, so I assume this is the result). When I installed the system (from installcd, then update, then install broadcom-wl, ...) I configured it to be started up with network manager, automatically on startup. I managed to get it working exactly once in that session.
Problem is, it doesn't start up and the wireless is not even visible when you click the network manager icon. For that matter, eth0 does not start automatically either, but at least there is a button to start it in network manager. Coming back to the tab devices, clicking on wlan0 allows you to click on the activate button ... but there it says: Cannot activate network device wlan0! b43 device wlan0 does not seem to be present.
Ubuntu Networking :: No Driver Claimed In Ndiswrapper - Atheros AR5001X+ Wireless Network Adapter?
Feb 26, 2010I recently switched from Windows XP to a clean install Ubuntu Karmic Koala 9.10 but it seems to be quite a problem to get the wifi up and running. In Windows the nearby network all appeared in network connections but the same section in Ubuntu is empty. So I decided to go with the ndiswrapper guide to solve the problem with an unclaimed driver. After an entire day messing with my computer I'm still not close... Below follows excerpts taken from the Ndiswrapper guide with posted results from my computer. "ndiswrapper won't work until it thinks that your Windows drivers have been properly installed and that they are the appropriate ones for your wireless card. You can run the command: ndiswrapper -l"
result:
WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
net5211 : driver installed
device (168C:0013) present (alternate driver: ath5k)
So I've posted the result the name of my wireless card below: lspci -nn
Result:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. CN333/CN400/PM880 Host Bridge [1106:0259]
00:00.1 Host bridge [0600]: VIA Technologies, Inc. CN333/CN400/PM880 Host Bridge [1106:1259]
[code]...
It seems like the network is disabled or unclaimed or both. What to do? I'm stuck after spending an entire day trying to install the wifi. I had no problems in Windows XP but it seems to be quite impossible in Ubuntu.
Fedora Hardware :: Wireless Network Adapter Not Detected - Dell Inspiron E1750?
Jan 4, 2011today my windows crashed and i decided to move into Linux.But here comes my biggest problem now, i cannot connect to wireless network but i am able to connect through wired connectionmine is a 10 year old computer so i think the card used is Intel PRO/Wireless 3945ABGi am using Fedora 14. please note that i know only very little in Linux so please respond accordingly
View 14 Replies View RelatedFedora Networking :: Can't Use Wireless Usb Adapter
Dec 11, 2009I just installed the driver for my D-link DWA160 adapter, And now I cant seem to get it working.
View 6 Replies View RelatedUbuntu Networking :: How To Setup A Wireless Network
Jun 7, 2010I want to setup a wireless network in my lab. Main reason is that I want to be able to print from every computer, but it would also be nice if we can share files. I have three 64 bit machines, a netbook and 32 bit notebook and my internet goes via an Wifi router to which other Windoooze machines connect. I want to change to Lucy now and hope it is easier to setup the network in clean manner.
View 8 Replies View RelatedFedora Networking :: Wireless USB Adapter Not Connecting: F10
Nov 12, 2009I have a wireless USB (TP-Link TL-WN620G) adapter on F10( 2.6.27.38-170.2.113.fc10.i686). I have installed the drivers and it is detecting my router. But it keeps asking for network password with repeating a dialogue box although I entered correct password. I have configured the wireless configuration using NetworkManager.
View 6 Replies View RelatedFedora Networking :: D-Link DWA-125 Wireless 150 USB Adapter?
May 29, 2010I have "D-Link DWA-125 Wireless 150 USB Adapter". I can use this wireless adapter on my laptop, i can use it on my desktop as well but only when windows is running, im a newbie to fedora, today is my 2nd day and 3rd night, so pretty exited about it. i have installed fedora 13 on a different hard-disk on my desktop. when the computer is booting, there is an orange light on the adapter glowing, it turns off when the computer reaches the fedora loading screen. If i see fedora's Network Configuration window under the hardware's tab i see the "D-Link DWA-125 Wireless 150 USB Adapter" listed along with my lan card. Now if i go towards the clock on the top right to get the wireless connection working, it shows wireless network disconnected. I have tried creating wireless connection manually by inserting the SSID, macadress, BSSID, ,WPA passkey etc, but still doesnt works. when i try connecting using hidden wireless connection, i receive window for inserting keyring password again and again, stating that the login password does not match. but during all this time, i still havent seen the orange light glowing activity on the external usb adapter. If i restart the computer in windows the adapter/wireless connection works. also have checked the Network service, it seems that the service is up and running. i really require some assisstance on this,
i have noticed this, that if i go under network configuration. the first tab over there, inside devices i cant see my D-Link adapter, but if i switch onto the hardware tab it shows my lan card as well as my D-Link adapter. so does it means that the driver is missing? or any service which is disabled, however at this point of time i can get only using wired connection. please assist me. with this issue, im also downloading the 500 complete update as well for fedora, hoping that it may make it work.
Fedora Networking :: Suggest Wireless-N Adapter (USB Or PCI) That Is Well Supported Under F13?
Nov 26, 2010Can anyone suggest a wireless-N adapter (USB or PCI) that is well supported under F13? And do you think an upgrade from G to N is worth it? I'm probably going to upgrade my router to N in any case as the old one is buggy and/or dying.
View 2 Replies View RelatedGeneral :: VMWare Player - Setup IP Of VM With Network Adapter Set To NAT
Dec 31, 2010I set my Network Adapter to the NAT setting, and ran an ifconfig for my machine. All the I got back was eth0 and lo. eth0 has the static IP configured I configured back in the days where I was running my VM Bridged with DHCP. Do I need to reconfigure my eth0 settings now and if so how?
View 1 Replies View RelatedUbuntu :: Get Wireless Access To WiFi Router With Xbox360 Wireless Network Adapter
Dec 10, 2010I want to try to get wireless access to the wifi router with the xbox360 wireless network adapter.Is this possible?
View 1 Replies View RelatedSoftware :: Installing Wireless Drivers With Atheros AR9285 Wireless Network Adapter?
Jan 12, 2011I have recently installed Linux Mint 10 on my laptop. When I look at the Device Manager in Windows 7, it says I have an Atheros AR9285 Wireless Network Adapter. Right now, I am unable to connect to wifi with Linux. What drivers am I able to install, and how would I install them?
View 3 Replies View RelatedOpenSUSE Wireless :: GNOME 3 Broke AR9285 Wireless Network Adapter - Could Not Make A Connection
Apr 23, 2011I own an ASUS N61JV-X2 notebook PC. It has an Atheros Communication, Inc. AR9285 Wireless Network Adapter. 03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 0280: 168c:002b (rev 01) I cannot see any SSIDs including my home Verizon FiOS 802.11 G WPA2-AES-TKIP encrypted network. I went to Starbucks to try to connect to their free Wi-Fi and I could not make a connection. How do I solve this problem so that I can connect to a SSID of my choice and make a wireless connection while using GNOME 3?
View 2 Replies View RelatedFedora Networking :: Usbid Of A Wireless Adapter Sufficient To Conclude?
Mar 7, 2010I have a wireless usb-adapter with usbid:
Code:
Bus 001 Device 003: ID 1690:0711 Askey Computer Corp. [hex] SMCWUSBT-G (no firmware) I have heard that the second number after ":" above gives info about the chipset included in the adapter. It turns out this adapter has an atheros 5523 chipset. My question is if the product id 0711 above is the only thing determining if the adapter will work with Linux? If so, i can find in the file modules.usbmap that zd1211rw supports this chipset:
[Code]...
though it is associated with a different vendor id which is 0x1435. In this case, should i manually associate this driver with this adapter? You might ask why bother tweaking the OS?. The reason is that neither Fedora detected this thing as a wireless adapter nor ndiswrapper was able to install the windows driver (I think the problem is Fedora is 64 bit but win driver is 32 bit).