Ubuntu :: Android Transferring Data To New Card?

Jun 13, 2011

I am not sure where to post this so i figure that general help is as good as any. I have just bought my self a 32 gb micro sd card and I want to transfur all my old stuff (apps, contacts, music) off my existing card, how do I do this?

View 2 Replies


ADVERTISEMENT

Ubuntu :: Transferring Data Between 2 Laptops

Jun 15, 2010

I would like to transfer a massive amount of data between my laptops simultaneously. Is there a way to attach a cable via one flash port on one laptop to another and transfer like that?

View 4 Replies View Related

Ubuntu :: Transferring Data From Hard Disk?

May 30, 2011

I was dual booting Ubuntu 8.10 and Windows Vista on a Acer Aspire 5920. My laptop went for service and the company said they will give me a fresh laptop instead of the one I am using now for they cannot set it right.

When I plugged in my hard disk through an external cable onto a windows machine it detected only the data present (which is almost negligible in my case) in the vista partition. I would like to transfer all the data I have from hard disk at least the one in the Ubuntu 8.10 to my new laptop on which I plan to run Ubuntu. Can someone guide me on how to go about doing it? Also is it possible to transfer all the installed softwares so that they start running in the new laptop without any extra effort?

View 9 Replies View Related

Hardware :: Mkfs After Transferring Data To HD?

Mar 6, 2010

openSuse 11.2 KDE 4 desktop User = newbie I was having some trouble with a Hard drive that I store my photo's and other personal data on. Fisrtly, it was messing my OS up, so that it would not boot to the desktop, but only to the command line where it would report that this drive was somehow corrupted and needed to be repaired. Secondly, the OS was reporting that certain files were 380,000.2 TB in size. this drive is only 200 GB.I didn't want to do the repair until I found a way to back up my data. I found another hard drive to do backup to but I had to take some data off of it. Which I did.

In the spirit of trying learn command line I decided to partition and format the hard drive using fdisk. I found some easy to use directions and proceeded to partition the drive. Unfortunately, I failed to realize the directions were only for the partitioning part [my fault for not reading further]. What I missed was that after using fdisk to partition, you must use mkfs to set filesystem type.[I thought I had done that in fdisk using the "l" , "t" commands within fdisk].

My questions are:

1] Can I do this mkfs command after I have put my data on the new hard drive or should I start fresh and redo partioning? [I have not deleted the other drive so my data is still there.]

2] What would be the cause of the incorrectly reported file sizes?

View 2 Replies View Related

General :: Transferring Data From Windows?

Dec 9, 2009

I' m using Mandriva 08 and windows 7 on my system. When i login to linux and try to copy data from linux drive to win drive or vice versa then it shows........

[root@lenovo mnt]# cp /home/simer/Desktop/*.avi win_e/
cp: cannot create regular file `win_e/xyz.avi': Read-only file system
cp: cannot create regular file `win_e/abc.avi': Read-only file system

I tried rsync, scp but didn't worked.

View 2 Replies View Related

Ubuntu :: Data Loss When Transferring Large Number Of Files?

Jul 20, 2010

This problem is not exclusive to Ubuntu, I've experienced it in Windows and OSX as well, but it seems that almost every time I transfer a large number of files (i.e. my music collection) between my desktop computer and laptop via my external hard drive, I end up losing files for no reason. I usually don't notice the files are missing until later on, because I am never informed of any data loss. Now, every time I make a large transfer of files, I just do it two or three times to ensure that I don't lose any files.

View 2 Replies View Related

Ubuntu Security :: Transferring Sensitive Data Quickly And Securely?

Jun 27, 2011

My company needs to send sensitive data across to another company, 800gb of .dpx. The way I have thought of is:
E-Sata/1TB WD black.
True-encrypted/ hw accelerated aes (3x machines being built with 2600k)
Sha1sum on each file.

The main goal is to make sure that
1. The files that were transferred off the server onto the drive, are exactly the same.
2. Secure.
3. Fast.

View 9 Replies View Related

Ubuntu :: Accessing MicroSD Card On Android Motorola XT720?

Oct 15, 2010

The Motorola mounts in 10.04 but I can't tell the size of the available disc space so don't know if it's some internal memory or the 16 GB microSD card. It shows some files and a setup.exe so I suspect it's not the card and don't want to screw anything up.

View 2 Replies View Related

Ubuntu :: Install Android Market On Android-sdk Emulator?

May 4, 2011

I installed everything and am running android OS on Ubuntu (using androidphonedriver guide). The problem I'm having now is that I don't know how to install android market application to be able to install other apps like opera etc.).

View 1 Replies View Related

Ubuntu :: Do Bandwidth Aggregation Of Two USB Data Card

Aug 4, 2010

I want to do bandwidth aggregation of two USB data card in UBUNTU.

View 3 Replies View Related

Networking :: 3G Data Card In Ubuntu 10.04 Not Getting Connected

Apr 22, 2011

I'm trying to connect the Reliance 3G data card in Ubuntu 10.04. I've done modprobe then make settings in /etc/wvdial.conf with username and password field as empty string. But when I'm trying to connect with sudo wvdial it is showing that "Modem is not responding" and exit. However, the same procedure with Reliance netconnect+ which take a username and password, working well. Does 3G needs some settings?

View 2 Replies View Related

Red Hat :: 3G Data Card Installation / Configuration?

May 7, 2011

How to configure micromax 3g data card. I have redhat .

View 1 Replies View Related

General :: Install A PCIe Card For Data Compression In Ubuntu 9.10?

Jun 21, 2010

I am trying to install a PCIe card for data compression in Linux ubuntu 9.10(karmic Koala). As you can see in the following code although I have the root access I can not get permission to install the device driver.As I have the root access I suppose to get access to install the driver. I checked around and got the procedure from a web siteEnabling root access in unbuntuBasically in almost all linux machines we will be havingroot access for login.but in ubuntu by default that option was not enabled.If u want to have root login in ubuntu then u have to do some changes in ur Ubuntu machinesSteps to follow1.First enter into ubuntu as your user login.2.Then open the terminal and type the command sudo -s,it will ask for root access and type the password.3.Then type passwd root it will ask for new password4.Open terminal and go to the path /etc/gdm/5.Open gdm.conf6.search for AllowRoot=false7.and then change AllowRoot=true8.now restart ur machine9.now u can enjoy with root accessThe funny part is when I search for the file which is gdm.conf in the prescribed location, I can not find it.

Code:
root@faisal-desktop:/home/faisal/Desktop# cd AHA/
root@faisal-desktop:/home/faisal/Desktop/AHA# ls

[code]....

View 6 Replies View Related

Fedora :: How To Configure Bsnl Ev-do Data Card In 11

Mar 17, 2010

How to Configure BSNL EV-DO Data Card in Fedora 11 :

1. Click on Application.
2. Go to System Tools
3. Go to Terminal

[code]....

View 3 Replies View Related

General :: USB Data Card Is Not Detecting In 2.6.36 Kernel

Jan 10, 2011

I am using a linux FC-12 machine which is running on 2.6.36 kernel. I wanted to use the USB data card with that machine. But it is not detecting the device. I found that the modules usbserial, option, qcserial were missing. I installed them using "insmod".After that I have removed and reconnected the device. Still the OS is not detecting the device.After the reboot of the machine, again the modules related to USB are missing.

View 2 Replies View Related

Software :: Using RHEL5 - Data Card Configuration

Apr 9, 2011

I am using RHEL 5. I have reliance datacard. I want to configure it in my linux pc. How to configure Data card in linux PC.

View 1 Replies View Related

Software :: SD Card Data Recovery For Mac And Windows

Jul 26, 2010

<<mod edit>> advertising deleted

View 1 Replies View Related

Fedora Networking :: How To Configure Bsnl Ev-do Data Card In 11

Mar 16, 2010

How to Configure BSNL EV-DO Data Card in Fedora 11 :

1. Click on Application.

2. Go to System Tools

3. Go to Terminal [tanmoy@localhost ~]$

4. Type su -l and enter

5. You have to Type your Password as a super user.

[tanmoy@localhost ~]$ su -l
Password:
[root@localhost ~]#

6. Plug in the USB DATA CARD.

7. Write lsusb and press enter for acknowledgement of detecting the USB device.

[root@localhost ~]# lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

[code]....

View 1 Replies View Related

General :: Making MTS Data Card Work In Fedora OS

Feb 3, 2011

I purchased a new Desktop PC and MTS MBLAZE data card. It works in Windows XP OS. To make it work in Fedora GNOME OS how can I proceed? Which software do I need? Where do I get it and how to download and instal it in my PC? The firm selling the data card do not have an easy solution.

View 1 Replies View Related

Software :: Memory Card Data Recovery Program?

May 18, 2009

A friend of mine asked me to try and recover some photos she deleted by accident on her SD memory card. Normally, I would flip over to my Windows box and do this, but I'm wondering if there is a Linux equivalent to a Windows data recovery program. I'm running Fedora 10.

View 2 Replies View Related

Fedora :: Recover Data From EXT2 Device (Card Or Image)

Dec 25, 2009

I was testing a bug in F12+Acer Aspire One and its 'suspend' feature (you can probably find the thread) and I ended with my SDHC card messed up. I formatted it as ext2 (or ext3, don't remember exactly) and apparently its superblock got corrupted. For one thing there is a single file I want to recover from the card (I don't mind formatting it afterwards). I am no expert using e2fsck or fsck, that's why I am asking here. In addition I used the "dd" command to create a backup of the drive in a file (so I can start tinkering with it). What is the best course of action to recover my files? Either from the card or from the image?

View 3 Replies View Related

OpenSUSE Network :: Connect 3g Gsm Data Card To Internet In 11.3(Gnome)

Apr 19, 2011

I recently purchased a Micromax 3g GSM usb data card(MMX 352G). I am using it in windows 7 but now I want it to connect to the Opensuse 11.3 to use internet.

This modem is not detected by the command "wvdialconf"

the device is detected by command "lsusb" as 1c9e:9605

View 3 Replies View Related

General :: Data Card - No Default Vendor / Product Found

Nov 17, 2010

I used usb_modeswitch but the result was "No default vendor/product found." But usbmod_switch.conf file has all the vendor & product id contained in it. And modeprobe is also not effective. Even Sakis3g script fails to switch my datacard into modem. How to use BSNL Data Card in Fedora 13?

View 1 Replies View Related

General :: PCM API To Write Audio Data To Sound Card At Kernel Level

May 26, 2011

In playback application i guess "snd_pcm_lib_write1" is the function call used to write the audio data to sound card at kernel level.If that is true. how can i send the same audio data at kernel level to other system connected over LAN.

View 1 Replies View Related

Ubuntu Networking :: Unable To Connect To Internet With Reliance Netconnect Data Card Using Network Manager

Jan 22, 2010

I'm using ubuntu karmic and I'm not able to connect to the internet with my reliance netconnect data card using network manager. Other distros like fedora, opensuse n sabayon connected easily with nm. Ubuntu detects the data card flawlessly but just doesnt connect.This problem has been persistent even in previous ubuntu versions, n I used to use wvdial. But downloading wvdial on some other comp with every dependency is really cumbersome.

View 6 Replies View Related

Fedora :: How Are Using BSNL EVDO Data Card - First Click On Application - System Tools

Oct 22, 2010

I found lots of pepole who belongs to India and using BSNL Data card wants to connect Internet from fedora so I thought post a thread which will help all how are using BSNL EVDO Data Card. At first click on application - System Tools - Terminal enter the following code on your terminal

Updated part starts here When I was using Fedora 10 I post this thread on that time gedit worked properly with "su" Now here if you are using Fedora 14 and by using su gedit is not appearing then try

Code:
su -
instaed of only "su" hope gedit will work properly. If dose not work then you can follow the next post instructions. Or you can ask in the forum for I am updating "su" by "su -" If you are using earlier version you can try by only "su" or "su-" if none of this works then follow next post. Just remember you have do this in a single terminal and step by step to avoid maximum uses of "su" or "su -"

[Code]...

View 2 Replies View Related

Fedora Networking :: Bsnl 3g Data Card Connection In Fedora 14

Dec 6, 2010

How to connect bsnl 3g data card in fedora14. i tried with mobile broadband connection but it is not working

View 4 Replies View Related

OpenSUSE Network :: How To Connect Network Data Card To Run Internet

May 21, 2011

how to connect my network data card to run internet on openSuse..

View 4 Replies View Related

Ubuntu Installation :: Transferring From One Disk To Another?

Jan 2, 2010

I guess I'll be asking the impossible... Is it possible to EASILY move my Ubuntu set up from one disk (smallish) to a bigger one, so that I can install Win7 as well on that bigger disk drive? I am not too keen on reinstalling ubuntu because then I will lose all those other ubuntu programs that I have installed.

View 3 Replies View Related

Ubuntu :: Transferring Current Installation To A New SSD?

Jan 18, 2010

I bought a 30 GB SSD and I need to install Ubuntu on it. I currently have a 1500 GB harddrive, on it my current 60gb ubuntu partition and the rest is Windows 7.Out of the 60 GB for ubuntu I have used 9 GB, so I want to transfer that 9GB to the SSD to preserve all my settings. Then I want to format the original 60GB to something else, probably NTFS since both linux and windows can read it.I tried sbackup but that creates a back up on my current drive, not what I intended. If there is a gui program that will work that would be great, if not I'll still give whatever suggested a shot.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved