I purchased a new Desktop PC and MTS MBLAZE data card. It works in Windows XP OS. To make it work in Fedora GNOME OS how can I proceed? Which software do I need? Where do I get it and how to download and instal it in my PC? The firm selling the data card do not have an easy solution.
View 1 Replies
I have a Toshiba laptop and Toshiba netbook (both Intel chipsets). Laptop - Squeeze install gave me the 2.6.32 kernel and sound only worked thru headphones but not the speakers. Later on, I compiled kernel 2.6.36.1 (and just imported .config from original kernel) and sound WORKED perfectly. I had a few other errors ("address space collision" / PM error) so recently I compiled kernel 2.6.38, which solved other hardware issues but sound is back to original problem (works thru headphones but not thru speakers). I even installed the "backports" kernel (2.6.38.4) and it didn't make a difference.
Netbook - Did exact same things as above but no matter what, the sound never worked on it... same issue (sound in headphones.. no sound in speakers) So, how do I "reverse-engineer" the laptop working sound install with kernel 3.6.36.1 and make it work with later kernel (nothing... and I've tried about 30+ thread suggestions makes the sound cards work properly.. other than kernel 2.6.36.1)
I wanted to migrate from ubuntu karmic to the latest ubuntu 10.10, but i already have a lots of data on my hard disk in home directory. i was thinking if it is possible to transfer all the data to one directory and make a separate partition of it , so tht when i install a fresh copy of ubuntu 10.10 on my system i need not format this new partition ,which contains al my data.is it possible tht this new partition will automatically get mounted on the new system without the need to execute commands from terminal every time i start my system. if there is any other alternative way for solving this problem i would follow tht too.the reason for my migration is that karmic is really troubling me a lot and so many applications including my sound device have failed to work and i am not able to rectify them..
View 1 Replies View RelatedEarlier today I created a bootable USB stick by executing a script file that came with the distro for that purpose and experienced no problems. Later on, I tried exactly the same thing but using a SD card via a USB adaptor and it didn't work. Is there some difference in geometry between these two media types that could cause this problem?
View 5 Replies View RelatedI've got a wireless card and would like to make a driver module for it from the ralink tarball. Here's the details:
1. The Asus PCI-G31 uses the RaLink RT2561/RT61 802.11g chipset.
Code:
lspci
<some output omitted>
04:03.0 Network controller: RaLink RT2561/RT61 802.11g PCI
2. I am using the latest driver download from www.ralinktech.com which is
2009_0123_RT61_Linux_STA_v1.1.2.3.tar.bz2
3. I followed the documentation and I think it makes a script. Here's part of the README from the tarball.
Code:
Build Instructions:
1> $tar -xvzf RT61_Linux_STA_Drv_x.x.x.x.tar.gz
go to "./RT61_Linux_STA_Drv_x.x.x.x/Module" directory.
2> $cp Makefile.4 ./Makefile # [kernel 2.4]
[code]....
Today I decided to try to install 2.6.31.1 on Fedora 11, x86_64.I did it differently from what appears to be the RPM way, I instead just compiled it from the source.Anywho, ndiswrapper with NetworkManager doesn't work in the new kernel
View 12 Replies View RelatedHow to Configure BSNL EV-DO Data Card in Fedora 11 :
1. Click on Application.
2. Go to System Tools
3. Go to Terminal
[code]....
How to connect bsnl 3g data card in fedora14. i tried with mobile broadband connection but it is not working
View 4 Replies View RelatedHow to Configure BSNL EV-DO Data Card in Fedora 11 :
1. Click on Application.
2. Go to System Tools
3. Go to Terminal [tanmoy@localhost ~]$
4. Type su -l and enter
5. You have to Type your Password as a super user.
[tanmoy@localhost ~]$ su -l
Password:
[root@localhost ~]#
6. Plug in the USB DATA CARD.
7. Write lsusb and press enter for acknowledgement of detecting the USB device.
[root@localhost ~]# lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
I am using a linux FC-12 machine which is running on 2.6.36 kernel. I wanted to use the USB data card with that machine. But it is not detecting the device. I found that the modules usbserial, option, qcserial were missing. I installed them using "insmod".After that I have removed and reconnected the device. Still the OS is not detecting the device.After the reboot of the machine, again the modules related to USB are missing.
View 2 Replies View RelatedI was testing a bug in F12+Acer Aspire One and its 'suspend' feature (you can probably find the thread) and I ended with my SDHC card messed up. I formatted it as ext2 (or ext3, don't remember exactly) and apparently its superblock got corrupted. For one thing there is a single file I want to recover from the card (I don't mind formatting it afterwards). I am no expert using e2fsck or fsck, that's why I am asking here. In addition I used the "dd" command to create a backup of the drive in a file (so I can start tinkering with it). What is the best course of action to recover my files? Either from the card or from the image?
View 3 Replies View RelatedI am trying to install a PCIe card for data compression in Linux ubuntu 9.10(karmic Koala). As you can see in the following code although I have the root access I can not get permission to install the device driver.As I have the root access I suppose to get access to install the driver. I checked around and got the procedure from a web siteEnabling root access in unbuntuBasically in almost all linux machines we will be havingroot access for login.but in ubuntu by default that option was not enabled.If u want to have root login in ubuntu then u have to do some changes in ur Ubuntu machinesSteps to follow1.First enter into ubuntu as your user login.2.Then open the terminal and type the command sudo -s,it will ask for root access and type the password.3.Then type passwd root it will ask for new password4.Open terminal and go to the path /etc/gdm/5.Open gdm.conf6.search for AllowRoot=false7.and then change AllowRoot=true8.now restart ur machine9.now u can enjoy with root accessThe funny part is when I search for the file which is gdm.conf in the prescribed location, I can not find it.
Code:
root@faisal-desktop:/home/faisal/Desktop# cd AHA/
root@faisal-desktop:/home/faisal/Desktop/AHA# ls
[code]....
I used usb_modeswitch but the result was "No default vendor/product found." But usbmod_switch.conf file has all the vendor & product id contained in it. And modeprobe is also not effective. Even Sakis3g script fails to switch my datacard into modem. How to use BSNL Data Card in Fedora 13?
View 1 Replies View RelatedI found lots of pepole who belongs to India and using BSNL Data card wants to connect Internet from fedora so I thought post a thread which will help all how are using BSNL EVDO Data Card. At first click on application - System Tools - Terminal enter the following code on your terminal
Updated part starts here When I was using Fedora 10 I post this thread on that time gedit worked properly with "su" Now here if you are using Fedora 14 and by using su gedit is not appearing then try
Code:
su -
instaed of only "su" hope gedit will work properly. If dose not work then you can follow the next post instructions. Or you can ask in the forum for I am updating "su" by "su -" If you are using earlier version you can try by only "su" or "su-" if none of this works then follow next post. Just remember you have do this in a single terminal and step by step to avoid maximum uses of "su" or "su -"
[Code]...
In playback application i guess "snd_pcm_lib_write1" is the function call used to write the audio data to sound card at kernel level.If that is true. how can i send the same audio data at kernel level to other system connected over LAN.
View 1 Replies View Relatedthere is an issue with the way the Linux Kernel addresses memory by default and the graphic drivers for my Asus G1Sn. I have a patch that I had compiled against a custom kernel for 2.6.27.xx how ever it does not work with the latest kernel in Fedora 11. It is beyond me to rewrite the patch to work with a different kernel.
View 1 Replies View RelatedFinally went open source at home, but must be able to load QB to work with data files already for me to load into program. Will my system at home allow me to load QB Pro Premier 2009? Or alternative apps that will let me load and work with the data?
View 2 Replies View RelatedIf you typed it in, my fdisk -l looks like this
[Code].....
I partitioned it using the Acronis (proprietary) partitioning software. I've had to move these around a bit when I initially set it up and at one point grub didnt work anymore. It was after I had to expand my Windows (7) partition. However I'm told that most modern software dont use the same unit of measurement that fdisk still uses 'til this day. Should I even be concerned? I did have to reinstall grub after I initial set all my partitions up. This post is merely a double-check to make sure.
I've just upgraded from F9 to F10. I can boot okay but I seem to have lost some data in one of my logical volumes. My drive is organised as follows:
/dev/mapper/main_group-various: UUID="f7c452cf-9f03-4f97-8676-b71b07a812aa" TYPE="ext3" SEC_TYPE="ext2"
/dev/mapper/main_group-root: UUID="173f1845-72c9-49e8-9d49-2a5776c4267c" TYPE="ext3" SEC_TYPE="ext2"
/dev/mapper/main_group-music: UUID="f5411861-4614-4652-a5f5-a3a8c2efcdd3" TYPE="ext3" SEC_TYPE="ext2"
[code].....
The logical volume for work still seems to be there. I presume (and hope) that all the information in /dev/main_group/work is still there. How can the folders in /dev/main_group/work be retrieved?
I can't believe you guys are on 10.10 Already that's amazing been so many changes since I last joined in 2007. I have a few questions regarding my new laptop and Ubuntu I was hoping to get answered before I make the switch from Windows 7 to Ubuntu 10.10 Small tidbit: Using 64x Ubuntu Question #1: Will my ATI HD5730 Graphics Card be Supported?
- When I say supported I also mean some of the features, I Currently use a 62" LCD 1080p HDTV as my Monitor using an HDMI Output to my Surround Sound Receiver. Will I still be able to do this? and will my 5.1 audio output still work? Noticed when I googled it some people were having troubles with 5730
Question #2: Is the Core i7 840qm Supported?
Question #3: Has any large scale break troughs happened with Ubuntu and Gaming? Back when it was Gusty and Hardy there was little high end game choice, wondering if that has made any progress?
Question #4: Have people had Success with Ubuntu and Dell Studio XPS?
This TV tuner PCI card does not work with my linux. I tried it in a windows box and it worked great. I tried it with MythDora and found it non functional. Hauppage says that it should work with linux. VLC plays the out put of the tuner card just fine but cannot change channels.
Post added at 12:16 PM Previous post was at 01:48 AM this Linux box has 8 gigabytes of ram and is running x86_64 version of Linux
i'm new to linux, and recently installed fedora 14 on an old hp pavillion dv2700. it originally had vista home premium, but the hard drive crashed and had to be replaced with a new one, which had no os on it. i installed fedora several days ago, and everything worked perfectly until a day ago when suddenly the wireless card wouldn't turn on anymore.
my sister was using the computer (just videos) and a few seconds after she handed it back to me, the wireless light turned from blue to amber, and it said wireless was diabled, even though i hadn't touched the switch. before the computer crashed, it had a problem of the light always being amber when it woke up from standby, but flipping the switch off and back on would fix it. now no amount of wiggling and flipping seems to do the trick.
First off I'd like to say if I hadn't put Fedora on my USB stick I'd never discovered that my old laptop had built in wifi, and it was just disabled in the BIOS. I was originally trying to get my Linksys WEC600n card to work. Once I turned on the internal wifi, and took out the linksys card, fedora picked it up right away. My problem is when I try going to websites they won't work, except for FedoraProject. (If I try to navigate to the FP forums it doesn't work either.) I'm not sure what would be the cause of this, so I have no idea where to start.
1. It had my wireless network in the list.
2. I put in my WEP key.
3. It appeared to connect fine.
4. Websites won't load.
5. ?
I found a solution to my card reader problem in a another fedora post but when I type the code in terminal I get:
all config files need.conf /etc/modprobe.d/blacklist
How to write this code so I wont get this error and I can load these modules and also how to edit the modprobe.conf.
The code is below, using fedora 13.
You must load these two modules to work with card reader.
First : Remove the card from the Reader!
AS superuser type in console :
1. /sbin/modprobe tifm_core <enter>
2. /sbin/modprobe tifm_sd <enter>
If you want to automate these modules loading do the following :
edit the /etc/modprobe.conf file
add these :
alias mmc_core tifm_core
alias mmc_card tifm_sd
I have HP 620 and i installed Fedora 14, but my wireless card doesn't work. My card is:02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvA Wireless LAN Controller (rev 10) Under Live Ubuntu the card works very well, but under fedora doesn't work.It's look like the fedora doesn't a driver.
View 1 Replies View RelatedI am using a Toshiba Satelllite L670 laptop and I can not get the built in wireless card to work....using F14.
View 3 Replies View RelatedI am looking for a wireless n card that will work "out of the box" on Fedora 14. I have a wireless card that i have to compile the drivers, the problem is getting the packages that are needed to compile, without internet. so does anyone know of a card like this. (has to be usb because i do not have a free pci slot)
View 6 Replies View RelatedI am almost tempted to go back to an old slackware to try this. Anyway, I found a circuit (with just a few resistors) that allows vga output to go to composite input. To my amazement it actually works and it is very clear, but has a double screen. I am told, to fix it you need to change the horizontal sync and or refresh rate for the card. (17 instead of 35). How would I do this in xorg.conf?
View 2 Replies View RelatedI'm looking for a wireless card that will work out of the box with Ubuntu 9.10. It has to be a pci card. I purchased a Edimax EW-7128G which the reviews said was a great card for linux but was DOA. I could have it replaced or get a different card.
View 1 Replies View RelatedI have installed Ubuntu 9.10 (64 bit) as a dual-boot setup (along with Win 7) on my desktop. I can't emphasize how much faster Ubuntu loads when compared with Windows. There is only one problem though, I cannot figure out how to use my existing FakeRaid array (two 2TB hdds setup as RAID 1 - mirroring) to work with Ubuntu. I am NOT trying to install Ubuntu onto a raid array (I have Win 7 mounted on a separate boot drive , 4 hdds altogether, two for each OS and two for the RAID array). The raid array works fine in Windows and it's an Intel Raid Controller. How can I do the same for Ubuntu without losing any data? Is this possible?
View 3 Replies View Related
