Ubuntu :: 10.04 And 11.04 In Dual Boot - Change Grub - Get Back To 10.04?
May 23, 2011I have 10.04 and 11.04 in dual boot. how I can get back to exclusively 10.04. I am nervous about the GRUB change.
View 7 RepliesI have 10.04 and 11.04 in dual boot. how I can get back to exclusively 10.04. I am nervous about the GRUB change.
View 7 RepliesI get the new boot splash with the nice little rocket and all but I seriously dislike it. While I don't stare at my computer as it boots, I do happen to see it from time to time. Unfortunately, I always see this new little rocket and I wonder where my traditional Debian blue with the swirl went. Yes, I know I am using Grub-Pc now, and I have tried to edit my /etc/grub.d file by renaming the wallpaper line to my preference.
But all my config file sees is "background-grub.png" which is the little rocket ship. So, I give. What is the secret code to unlock my grub config file or do I seriously have to muck around with Plymouth in order to have a choice in the matter? Just for those of you who contemplate counseling me on better time management instead of wasting my precious time over such a silly little thing, I agree. Not to mention that I use Debian because I like to build my system.
since i have installed the nvidia drivers i have lost the graphical boot and just had a bar at the bottom of the screen instead. i tried to get the graphical screen back by adding vga=795 to my /boot/grub/grub.conf but when i rebooted not only did i not get the graphical boot or the toolbar at bottom.
i got list of all the drivers and services it is starting with ok next to it. i have also since doing this lost the bit when restarting or shutting down getting the words restarting or shutting down and just get blank screen with flashing cursor. i removed the vga=795 and i still get the list of drivers/services loading.
how do i get the quiet option back. i have checked /boot/grub/grub.conf and it has the quiet in it.i have also tried running update-grub but get message command not found. i have attached the grub.conf file
i am trying to change the boot order on the GRUB menu so that the countdown automatically starts on an older kernel. From what i can see all the solutions on the web want me to edit the /boot/grub/menu.lst file. The problem is that i don't have one. Someone also mentioned that if i don't have a menu.lst file then i should look for the grub.conf file. I don't have on of those either. The closest thing in /boot/grub is grub.cfg but that looks nothing like the descriptions i have heard of /boot/grub/menu.lst file
View 5 Replies View RelatedSo my computer has ubuntu 9.10 installed 1st and I want to install win 7 in a separate partition. Basically, ubuntu 1st, win 7 later so far from what I learned from search results, grub 2 have problem with win 7 installed later and what was recommended was install win 7 before ubuntu. how ever I do not have the time to start over again because there are too many things to back up or install again. can I simply revert grub 2 to grub 1 again and resolve the problem?
View 7 Replies View RelatedI have multiple drives on my system and I decided to put Ubuntu on my main 1TB hard drive. I install 9.10 on my drive and it partitions half of it to Ubuntu and install is successful. Well, on reboot I get nothing. I switch to my secondary drive with windows on it already and the dual boot menu appears? Apparently it installs in on SATA1 and not the drive selected as boot in the BIOS. I decided to leave it this way until recently I needed to use the secondary drive on my other rigs failing hard drive. So, how do I get grub on the 1TB hard drive? I ran windows 7 BOOTREC files and recovered the Windows boot, but I couldn't get Ubuntu to recover with live CD nor the GRUB online help didn't work. Is there a simple way to get my dual boot menu back?
View 5 Replies View RelatedHow will I go about getting the linux Dual boot screen back
ubuntu 10.10 desktop
Win XP H.E.
I deleted windows xp a while back from dual booting. now i would like it back... and have no idea how to do that and without losing my files.
View 9 Replies View RelatedThe first is I seem to have 3 GRUB installs. So whilst I update the one from my live session, the change does not appear in the boot up menu. I had installed 10.10 from a CD into a different partition (sda6), but that will not boot, so I have just deleted this and done another grub install and update. The kernel I am using has just been updated from 10.04 to 10.10 too, and it is this that I use and the Grub I have been working on (sda5).
[Code]...
i could not change the sequence of dual booting from the grub menu.lst, due to it shows a blank screen when i put the command in the terminalayan@jayan-desktop:~$ sudo gedit /boot/grub/menu.lst [sudo] password for jayan:
View 6 Replies View RelatedI'm trying to dual boot Win7 and Ubuntu WITHOUT using Grub. This is to support Bitlocker encryption.
I followed this guide, and now when I select Ubuntu I get a Grub> prompt and no ubuntu.
I feel like I'm halfway there, I just need to get Grub to load correctly or something.
I've installed Ubuntu on my new desktop alongside Windows 7 (each OS is on a separate drive), I seem to have run into a small problem. Let me start with what I did:
- Unplugged 1TB drive from the PSU, BIOS was not seeing my formatted (and thus empty) 500GB drive and I couldn't put it into the boot order at all with the 1TB turned on.
- Loaded up the boot CD and was able to install Ubuntu 10.1 on my 500GB drive.
- Did a bit of configuring, shut my PC off and plugged my 1TB (with Windows 7) drive back in. I tried to see if I could now see my Ubuntu drive in BIOS but nothing is there - just the Windows drive is in the list of available drives to boot from (along with DVD-ROM and USB).
This is where I've run into my problem. What I want is to have a nice GRUB boot menu at the start like any other dual-boot system but just have the two operating systems on separate drives altogether.I did it this way because I was having issues with the advanced partition menu on the boot CD so just went ahead and followed the KISS method by unplugging the Windows drive.
I was told by a friend that if I put my Ubuntu drive into the first position in my boot order and the Windows drive in the second, then I could boot into Ubuntu and run a GRUB update command (he told me to google it) and that would create the necessary GRUB that had the entries for Windows 7 and Ubuntu.Both operating systems are 64-bit, I imagine that might make a difference in whatever help you guys can offer me. I love the hell out of both OS's and want to be able to use them interchangeably.
i am having a problem with my dual boot setup. I originally installed windows XP on a 100gb hard drive, from there i downloaded and burnt ubuntu off so i could install it on my 200gb hard drive. For a little bit i struggled to even get it to install because it wouldn't recognize my onboard nvidia graphics, i ended up having to get an alt boot disk and fix it with technique in this link:
[URL]
Now after the bios boot, my screen shuts off for awhile and takes me directly to the login screen for ubuntu. No Grub, no windows boot options, nothing. I tried booting windows by choosing it from the bios boot menu but all it does is hang at prompt and doesn't boot at all. I tried the live cd fix and reinstalled grub but nothing changed. What i think is happening is that it boots the Grub menu but it doesn't display it because of graphical confrontations. It hangs for about 10 seconds, the grub default time, and then turns my monitor back on to display the Ubuntu login screen.
I followed a tutorial to install XP across my entire HDD. I installed Ubuntu 10.10 "Alongside another OS". Ubuntu loads fine, but when trying to load XP, the boot screen shows up, but then the computer restarts and returns to the GRUB menu.
I saw some threads on this site and tried to type: sudo gedit /boot/grub/menu.lst
In the terminal. It returned a blank text document so I'm not sure if that information was outdated. I then typed: sudo fdisk -l
And got this:
Not sure what any of this means, but I sure hope someone else does. I would say forget XP, but it's hard to let go of some of the games and software I use. I appreciate any responses, thank you.
I tried to format the table as it appeared, but the forum corrected the extra spaces.
I had a dual boot system with 3 partitions, Windows 7 on one partition, and Windows XP on another partition and a Data partition. I decided to load Ubuntu 10.10 on the Windows XP partition.During installation I selection manual partition, and deleted Windows XP.after successful completion of Ubuntu installation "Grub" directly boots into Ubuntu, it doesn't show me the OS selection screen. After following some forum posts I did an update grub
Code:
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-2.6.35-22-generic
Found initrd image: /boot/initrd.img-2.6.35-22-generic
[code]....
I have an Acer Aspire 5810T which came with Windows Vista. I prefer Ubuntu but I need some windows applications so I dual-booted Vista and 9.10.
There was a few minor problems with the Vista side but I didn't use it enough to care. A few weeks ago Vista would not open some programs and others would shut down automaticly and some would open but not connect to the internet like they should. This happened on my previous laptop and when I used the system recovery discs to restore the computer all those issues were gone.
I used the recover discs to restore everything to its original factory settings, it said everything was successful so I restarted. My computer got to the grub menu but when I chose Windows Vista as my operating system it goes black for half a second then returns to the grub menu.
I can get into Ubuntu fine, and I can see the Vista files when I mount the drive to Ubuntu. When I look at the files everything is the way it should be if I had restored it but I can't boot it..
I am persuaded now (too late) that I need to invest in a robust backup scheme.
I had refit dual-booting snow leopard and ubuntu 10.10.
I tried to upgrade to 11.04 and it got stuck on bootup after the upgrade.
So I went into disk utility and deleted what I thought were all partitions except the mac one. I rebooted, and now I get the grub no partition error.
Did I delete my mac partition? I don't think that I did. How do I boot back into mac os x? Using the option key on bootup no longer shows a mac disk and inserting the mac os x system cd doesn't show any options either.
My comp came with Vista and then I installed Ubuntu, so it's dual boot. When I start up the computer, it eventually opens a screen with the options to boot Ubuntu, Vista and 3 other partitions. Ubuntu is at the top, Vista at the bottom, and it gives you five seconds to pick an OS or it automatically starts Ubuntu. This is very annoying because I almost always need Vista and I have a habit of pressing power and walking away and letting the computer load. Is there a way to have Vista be the default selection?
View 1 Replies View RelatedI updated from Ubuntu 9.10 to 10.04 via Ubuntu updater. Worked nicely. Until I had to use Win 7 for a moment, so I went to the Grub boot menu and picked Win 7. Nothing is happening. Just a black screen with blinking underscore to the top left corner. I never had this problem with 9.10, so I am confused. I tried looking around and nothing helped. Be noted that I am an amateur with Ubuntu coding and installing. I did hear that this is already a common issue now.
View 6 Replies View RelatedHW config is: AMD Athlon 64 X2 5000+ Black Edition, MSI 785GTM-E45, 2X 1Gb Kingston HyperX PC2-8500. I have set up GRUB to dualboot openSUSE 11.2 and WindowsXP. Initially i had set up system with defaults: CPU@2600MHz (200X13) and therefore RAM@800MHz. Both openSUSE 11.2 and WindowsXP worked just fine. Memtest86 found no problems.
But after a while i decided to change this setup to: CPU@2500MHz (250X10) and therefore RAM@1000MHz, as it promised better overall performance. And now Windows still boots and works better then before. Memtest86 still can't find any problem. But openSUSE 11.2 hangs at boot. I've suspected cpufreq governor, but changing from Ondemand to Conservative in /sys/devices/system/cpu/cpu0/cpufreq doesn't help.
This is the third time I try unsuccessfully to install Debian as a second OS on a hard drive. When it gets to the end of the installation process the installer asks whether I want to go ahead with the Grub Boot Loader, I choose yes. The end result is however that I can't boot that partition within the hard drive -- i.e., Debian. Can someone tell me what is going on? Should I not use the Grub Boot Loader when I have more than one operating system on a machine? Should I not install Grub on the Master Boot Record (MBR)?
View 3 Replies View RelatedI just set up a dual boot on a system with fedora 12 and XP. XP in on one hard drive (sda) and Fedora on a second hard drive (sdb).
I installed grub on the Fedora disk so as to not touch the windows disk at all.
Prior to installation, in the bios, I set the Fedora disk (sdb) first in the boot sequence, and then XP (sda) so that the grub loader would boot up by default. (If I set the windows drive first then the system bypasses grub and loads straight into windows.)
My system can now boot up into Fedora fine, but if I select windows from the grub loader menu I just get a blinking cursor - windows will not boot.What do I have to do so that grub can boot into XP?
I tried to do my parents a favor by installing Ubuntu 9.10 alongside WinXP on their PC -- same configuration I have on my desktop at home. The install went fine, but since I made a poor buying decision on purchasing a MSI motherboard in the past, Ubuntu immediately crashes after boot (other MSI board users having the same issue, no help from MSI).
The computer tries to boot Ubuntu by default unless something else is selected from the boot menu. How do I change the boot preference from default (choice 0) to WinXP? I tried manually changing this (editing the grub.cfg file), but the file said not to edit, that it's generated by something else...How do I have WinXP load by default instead of the broken Ubuntu?
Whenever I load Ubuntu on a machine with other OS(s) loaded it always recognizes and adds an entry in the bootloader menu. Not this time. Well kind of. After the install my windows boot option was in the menu, but after an update it is no more. I see the different Linux images... but no Windows boot option. Can someone tell me how to add my windows XP boot option back to the bootloader? I have XP on the the on the 5th partition and Ubuntu on the 6th...
View 3 Replies View RelatedI am now dual booting between Windows 7 and Ubuntu 10.04 When i turn on my computer it goes to a GNU Grub screen where i can choose an OS to boot, in 6 seconds it auto chooses default. How to i change the default from Ubuntu to Windows? I have tried to edit the grub.cfg file but it wont let me [URL] i need the .NET framework for a lot of my studies so i need to default into Windows
View 4 Replies View RelatedI installed Ubuntu 11.04 as a dual boot system. I am given 5 choices with XP choice 5. Unless I highlight it I will boot into Ubuntu. I used the startup manager, and indicated that XP should be the default OS. Nothing changed. I tried the PySDM storage device manager which lists the partitions, but does not allow me to make changes.
View 2 Replies View RelatedI've recently installed Vmware on Vista and I am using that to run Linux. I prefer this method over duel booting as I can quickly switch between the two OSes. So here is what I would like to do.
1) Remove swap partition (not needed).
2) Remove Linux and format partition to NTFS for windows use.
3) Remove Grub.
What I don't want to do.
1) Reinstall Windows Vista (Lots of programs installed).
I have a system dual booting Ubuntu with XP.Up to upgrade to Lucid, grub worked fine, but now any attempt to use the grub menu to move to XP gives only another grub menu.I need to use XP once in a while. How do I resolve this
View 9 Replies View RelatedI have Windows xp and Ubuntu 10.04 in my system and last fine morning I was working in windows and when I restarts the system as there were some problem in the audio I found that the grub is not loading. Computer boots directly in the windows xp mode and not giving the possibility to boot in the ubuntu OS. Also, the windows xp restarts continuously with a blue screen for just a second.
This happened out-of-the blue. What might be the possible reason for this and how to get rid of this problem..
I am running a dual-boot of Ubuntu 10.04 and Windows 7. My current setup uses EasyBCD to pick between Ubuntu and windows. If I pick Ubuntu, it then fires up GRUB, which then goes to Ubuntu. My question is: Can I skip GRUB altogether in the boot process? I rather suspect that it's slowing things down a lot. I've set the GRUB default OS timeout to 0, but it still boots slowly, which annoys me. way to skip GRUB entirely and use only EasyBCD for both OSes?
View 4 Replies View Related