Ubuntu :: Disabling GRUB Boot And Adding Entry To Boot.ini?
Jun 19, 2010
I want to install ubuntu 9.10 into other partition, but I want the win xp boot.ini file to configure my boot settings, not the GRUB. First I want to ask is it possible to install ubuntu, but add a boot entry in boot.ini? If not, then I know how to remove it, i found a file called ms-sys, with it I can remove GRUB. So let's say grub is no more, what should be an entry to ubuntu. When it was installed into Windows it was
Code:
c:wubildr
now what should I enter, my guess would be
Code:
m:ootgrubmenu.lst
View 3 Replies
ADVERTISEMENT
Oct 26, 2010
I have a pc where there was redhat installed, and I decided to put ubuntu in dual boot.The installation went ok, but now I can't log in with redhat anymore. RH was installed on a RAID partition, and I installed ubuntu on an additional HD.
Now I have two problems:
a) I cannot boot red hat, since there is no such entry in the grub
b) this machine had several users, that now cannot access it remotely anymore.
Below you can find the output of fdisk -l and the grub.cfg files, the old red hat one, and the new one created by ubuntu. Not that in any case I cannot reinstall redhat, since there are other people using the machine.
[Code]...
View 2 Replies
View Related
Jul 20, 2011
I have Recently downloaded Fedora 15.|64bit| & I Think its a very good distro. However I Realised Once My Pc Restarted My Windows 7 Was Removed from my boot entry. I am Not At All familar with Linux, Ive Read millions of forums trying to fix my problem but all has failed.Could someone show me how to add The OS Back or How To Burn A Bootable OS (Win7) Using This Distro Of Linux.
View 10 Replies
View Related
Jun 15, 2011
I'm going to try and install fglrx again, however last time it killed my system, giving me a 'display not detected' error on my monitor with no way to reach a non-grapgical tty to edit xorg.conf.Is it possible to create a custom grub entry that will boot Fedora 15 with the Radeon drivers in case fglrx once again trashes my system?
View 2 Replies
View Related
Nov 21, 2009
since i have installed the nvidia drivers i have lost the graphical boot and just had a bar at the bottom of the screen instead. i tried to get the graphical screen back by adding vga=795 to my /boot/grub/grub.conf but when i rebooted not only did i not get the graphical boot or the toolbar at bottom.
i got list of all the drivers and services it is starting with ok next to it. i have also since doing this lost the bit when restarting or shutting down getting the words restarting or shutting down and just get blank screen with flashing cursor. i removed the vga=795 and i still get the list of drivers/services loading.
how do i get the quiet option back. i have checked /boot/grub/grub.conf and it has the quiet in it.i have also tried running update-grub but get message command not found. i have attached the grub.conf file
View 3 Replies
View Related
Jun 10, 2009
I successfully installed Fedora 11 from the DVD iso. At the end, the installation program prompts me to reboot the system. But when the boot loader appears after rebooting, there are only the old entries.
I have 2 IDE disks and one sata disk. The first IDE disk is hd0, the second IDE is hd1. The SATA disk is hd2. In the setup, I selected hd0 to install grub. Fedora 11 was installed on the SATA disk (hd2).[edit] I forgot to say, that Fedora 10 is on /dev/sda and Fedora 9 on /dev/sdb
View 7 Replies
View Related
Jan 28, 2010
I'm using slackware 13 and now i want to add slackware 13 to grub .How do i have to do it ? Slackware is great to learn because i've a lot of linux using slackware than using any other distro. But some programs are dependant on other which i was not able to install, they call it dependencies. Even though compiling from source is great but runnning the program is a problem as the program terminates may be because of some dependency not installed.The same goes with sbopkg and others ..As of now i'm thinking of installing Ubuntu along with Slackware13 as this system is used by everybody in the family. How to add slackware to Ubuntu's grub.......
View 3 Replies
View Related
Mar 29, 2010
This is no huge problem, but it is rather annoying to me. I am using the 10.4 beta, and whenever I get a large update (like a updated kernel) GRUB adds another boot option to the menu (I'm dual booting Vista and Ubuntu.) So my GRUB menu looks something like this when I turn my computer on:
GNU GRUB version 1.98-1ubuntu2
Ubuntu, with Linux 2.6.32-18-generic
Ubuntu, with Linux 2.6.32-18-generic (recovery mode)
[code]....
View 6 Replies
View Related
Feb 6, 2010
With the generous help from caf4926 and please_try_again, i was able to boot into Ubuntu 9.10 with suse's grub legacy.Now I have another problem that i'd need help on, I added a new IDE hard drive for storage and it became sda and the original sda with 3 OSes changed to sdb. Grub can't boot into any OSes except windows 7. Well, i can still boot into Ubuntu if i change the boot option from
Code:
root=/dev/sda2 ro quiet splash
to
[code]...
View 9 Replies
View Related
Feb 22, 2011
Ive installed centos freebsd and mandriva but i want to manage grub from my centos and y create successfully a boot load for freebds. But for mandriva it just doesnt work... so how can a create a boot load entry for mandriva from grub centos?
View 1 Replies
View Related
May 2, 2011
I installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================[code].....
View 3 Replies
View Related
Nov 29, 2010
i am trying to change the boot order on the GRUB menu so that the countdown automatically starts on an older kernel. From what i can see all the solutions on the web want me to edit the /boot/grub/menu.lst file. The problem is that i don't have one. Someone also mentioned that if i don't have a menu.lst file then i should look for the grub.conf file. I don't have on of those either. The closest thing in /boot/grub is grub.cfg but that looks nothing like the descriptions i have heard of /boot/grub/menu.lst file
View 5 Replies
View Related
May 16, 2011
we have an oracle application server on red hat 4.6 upon booting it comes up with error: attempting boot from hard drive (c GRUB)
View 2 Replies
View Related
Aug 19, 2010
I recently moved from KDE (the latest developments didn't satisfy me) to Gnome but I cannot find the option to remove it. That is, how to remove the temporary entry in the Gnome taskbar, that appears when you start some applications, with the text "Starting <app name>" (like "Starting Terminal"). This feature seems to have enough names (launch notification, startup notification, etc) to get lost among random discussions.
View 1 Replies
View Related
Jun 6, 2011
I can't figure out how to prevent Zend Server starting at boot up. My temporary solution is to issue the following after boot-up:
Code:
sudo /usr/local/zend/bin/zendctl.sh stop
I'd like to:
1. Prevent it from starting during boot
2. Create two launcher icons to Start and Stop Zend Server
View 1 Replies
View Related
May 20, 2010
In Debian, how can I disable Apache2 from starting automatically at boot time?
View 5 Replies
View Related
Feb 12, 2010
How can I disable the interactive boot up process? Also what is the pros and cons to doing this? Will this affect my being able to get to runlevel 1?
I have been googling it but not really clear on the pros/cons etc.
I am talking about a server class machine that is in a locked room, not a desktop.
I know it can be turned off in /etc/sysconfig/init # Set to anything other than 'no' to allow hotkey interactive startup... PROMPT=yes
View 4 Replies
View Related
Apr 2, 2010
i just installed ubuntu 9.10 netbook remix, i made a partition (sda6) for it, first i had only opensuse, and when i was installing ubuntu, i put the bootloader in (sda6) the Opensuse bootloader is installed on MBR,
[code]...
View 5 Replies
View Related
Jan 27, 2011
I have long been avoiding Grub2, but it got installed without my permission when I upgraded to Maverick. I was using the legacy Grub from Fedora and was quite happy, but after partitioning Ubuntu did not give me the choice of not installing Grub2. Anyway, I can live with it if I can learn it well enough to edit it as easily as I did legacy grub. My problem is that although Fedora boots fine, grub did not add the initrd entry to boot the Slackware kernel Which of course it requires.) I edited /boot/grub/grub.cfg and manually added, but as soon as I ran "update-grub" it removed it again. Does anyone know how to permenently add this line to the kernel line in Grub2 for Slackware.
View 5 Replies
View Related
Jul 17, 2011
I'm trying to stop all boot time messages from appearing -- basically I'd like to have a simple blank screen from grub to xdm.
I tried everything -- used the "quiet" option in grub's config, added dmesg -n 1 to rc.local, changed console=ttySx, set kernel.printk in sysctl.conf to 4 1 1 7, and even eradicated rsyslogd altogether... to no avail. I still see all sorts of messages on my screen.
View 1 Replies
View Related
Apr 18, 2010
I am trying to streamline my boot screen/GRUB Menu. I know what I want it to look like (grub_wanted.jpg), and I think I know how to get it by uninstalling a couple of things, (synaptic.jpg). Now I have too many items on the screen, and it looks cluttered to me (grub.jpg).
View 3 Replies
View Related
Mar 4, 2010
Splashtop caught my imagination of my own tv like computer-"1button and ready to go " have tried puppy xpudWebConverger still unhappy Now lucid aming for 10 sec boot-Keeping ma fingers crossed installed a minimal karmic and am getting a decent 27 sec I Jus Wanted to ask: Is there a way to remove the grub an directly boot into ubuntu -not just hiding it by editing grub.d files and any other ways to reduce boot time.......
View 9 Replies
View Related
Sep 4, 2010
I installed Ubuntu 10.04 LTS on a machine with 8.04 LTS, and have dualboot between those i system.The problem is when a start a get a message:'Boot error'If I hit 'Esc' I get to the Grub -meny and can boot as normal.
View 1 Replies
View Related
Nov 8, 2010
I'm trying to dual boot Win7 and Ubuntu WITHOUT using Grub. This is to support Bitlocker encryption.
I followed this guide, and now when I select Ubuntu I get a Grub> prompt and no ubuntu.
I feel like I'm halfway there, I just need to get Grub to load correctly or something.
View 8 Replies
View Related
Jan 28, 2011
I've installed Ubuntu on my new desktop alongside Windows 7 (each OS is on a separate drive), I seem to have run into a small problem. Let me start with what I did:
- Unplugged 1TB drive from the PSU, BIOS was not seeing my formatted (and thus empty) 500GB drive and I couldn't put it into the boot order at all with the 1TB turned on.
- Loaded up the boot CD and was able to install Ubuntu 10.1 on my 500GB drive.
- Did a bit of configuring, shut my PC off and plugged my 1TB (with Windows 7) drive back in. I tried to see if I could now see my Ubuntu drive in BIOS but nothing is there - just the Windows drive is in the list of available drives to boot from (along with DVD-ROM and USB).
This is where I've run into my problem. What I want is to have a nice GRUB boot menu at the start like any other dual-boot system but just have the two operating systems on separate drives altogether.I did it this way because I was having issues with the advanced partition menu on the boot CD so just went ahead and followed the KISS method by unplugging the Windows drive.
I was told by a friend that if I put my Ubuntu drive into the first position in my boot order and the Windows drive in the second, then I could boot into Ubuntu and run a GRUB update command (he told me to google it) and that would create the necessary GRUB that had the entries for Windows 7 and Ubuntu.Both operating systems are 64-bit, I imagine that might make a difference in whatever help you guys can offer me. I love the hell out of both OS's and want to be able to use them interchangeably.
View 5 Replies
View Related
Jul 3, 2011
i am having a problem with my dual boot setup. I originally installed windows XP on a 100gb hard drive, from there i downloaded and burnt ubuntu off so i could install it on my 200gb hard drive. For a little bit i struggled to even get it to install because it wouldn't recognize my onboard nvidia graphics, i ended up having to get an alt boot disk and fix it with technique in this link:
[URL]
Now after the bios boot, my screen shuts off for awhile and takes me directly to the login screen for ubuntu. No Grub, no windows boot options, nothing. I tried booting windows by choosing it from the bios boot menu but all it does is hang at prompt and doesn't boot at all. I tried the live cd fix and reinstalled grub but nothing changed. What i think is happening is that it boots the Grub menu but it doesn't display it because of graphical confrontations. It hangs for about 10 seconds, the grub default time, and then turns my monitor back on to display the Ubuntu login screen.
View 8 Replies
View Related
Jun 25, 2011
i installed slackware then i unistalled it and installed debian then i decided to go back to slackware but it wont boot because i have the grub boot loder how do i fix this
View 2 Replies
View Related
Dec 16, 2010
I followed a tutorial to install XP across my entire HDD. I installed Ubuntu 10.10 "Alongside another OS". Ubuntu loads fine, but when trying to load XP, the boot screen shows up, but then the computer restarts and returns to the GRUB menu.
I saw some threads on this site and tried to type: sudo gedit /boot/grub/menu.lst
In the terminal. It returned a blank text document so I'm not sure if that information was outdated. I then typed: sudo fdisk -l
And got this:
Not sure what any of this means, but I sure hope someone else does. I would say forget XP, but it's hard to let go of some of the games and software I use. I appreciate any responses, thank you.
I tried to format the table as it appeared, but the forum corrected the extra spaces.
View 7 Replies
View Related
Jan 5, 2010
I tried to do my parents a favor by installing Ubuntu 9.10 alongside WinXP on their PC -- same configuration I have on my desktop at home. The install went fine, but since I made a poor buying decision on purchasing a MSI motherboard in the past, Ubuntu immediately crashes after boot (other MSI board users having the same issue, no help from MSI).
The computer tries to boot Ubuntu by default unless something else is selected from the boot menu. How do I change the boot preference from default (choice 0) to WinXP? I tried manually changing this (editing the grub.cfg file), but the file said not to edit, that it's generated by something else...How do I have WinXP load by default instead of the broken Ubuntu?
View 8 Replies
View Related
Apr 3, 2010
I'm a noob but enjoying dual booting. However, every time I run update manager I get a new vmlinuz entry and now I have multiple boot options in my grub boot menu. Now when I have like 5 ubuntu entries to move past to select Windows. and the latest Ubuntu is always at the bottom so I have to annoyingly scroll down to select the latest there. I don't really understand what the vmlinuzXXX entries in the boot folder are for so I don't want to delete them. I've thought about editing the loop in the 10_linux file in the grub.d folder but it looks like its calling a function or macro or something:
Code:
linux='version_find_latest $list'
But like I said, I'm a noob to all this (a .Net developer on Windows professionally) and don't understand where this is. It looks like this function call has the logic I need to fix. Because its not finding the latest, its just finding all. How to I get back to one Ubunutu boot option like when I first installed?
View 4 Replies
View Related
