As someone says,I install fedora 15 in VisualBox,and before installing I choose "Enable 3D acceleration",but when entering the desktop,I just see "Gnome 3 failed to load".Earlier of today,I try this in VMware Workstation,there is the same question. Why this happens?Is that means I will miss the Gnome 3 in VisualBox and VMware Workstation.....for God's seek...
View 8 RepliesI have built my own custom Fedora 15 spin, the problem is that every time it show me GNOME 3 Failed to Load message dialog with the following message: "Unfortunately GNOME 3 failed to start properly and started in the fallback mode ....." Is there anyway to disable this dialoag?
View 1 Replies View RelatedI've just bought this laptop Asus G750JZ with Intel Haswell i72.4 GHz and Nividia GTX 880. I have this problem with Debian: after i install the OS it says that Gnome 3 could not be loaded. I guess it doesnt recognize my video cards(Intel HD 4600 and NVidia 880). How to make Debian running in optimal condition on my laptop.
View 5 Replies View RelatedI just installed opensuse 11.4 64 bit. Compiz and everything was working fine on my ati card (mobility 2600) with the default radeon drivers. I added the gnome 3 stable repo, updated fine. But when I rebooted I get booted into the fallback with no 3d effects and it says "gnome 3 failed to load" What gives? The drivers were working fine with full acceleration. I know gnome 3 works on this card, I tested it on the fedora live cd just fine.
View 5 Replies View RelatedI recently upgraded from 10.10 to 11.04. I am able to log into and use LXDE desktop, but at the GUI login when I try to log into gnome-shell or Open Box, the log in fails. With Open Box I just get a black screen. When trying gnome, I get error "Failed to load session "gnome." When trying KDE Plasma I get music and then black screen on which I can control the mouse cursor.
Attached is my hardware info and xsession error file. I am using a Samsung SyncMaster 175v monitor. Version 10.10 worked well, with not issues, and was fully updated. I followed the upgrade directions, I believe.
I uninstalled Empathy, now I have error in gnome with OAFIID:GNOME_FastUserSwitchApplet failed to load. Installing back empathy dont solve the problem. Pidgin is better by far, why ubuntu want me to use empathy? Anyway, how should I reinstall this applet? I google it, but I cant find out the way to install the session indicator applet. Sorry, noob here.
View 2 Replies View RelatedI boot EPC 1000h from usb(Fedora-12-i686-Live). it shows msg at the point about "drm-model-rmfb". ...than it "sleep forever".
View 2 Replies View RelatedHow do you resolve the error, "failed to load session "Gnome"" at start up?
View 2 Replies View RelatedI am installing fedora 15 in vmware 7.1.4.It tells me "Gnome3 failed to load and started in the fall back mode" when accessed in live-cd.Ever since fedora 15 beta or any other distros take gnome3 as default destop,I haven't experienced a beautiful normal gnome3
View 14 Replies View RelatedOn attempting to load GNOME 3 with Gnome shell, the screen fades to white, stalls for a minute, then gives an error and asks to log out. "Classic Gnome with Compiz" has numerous graphical glitches such as the background not refreshing (think Windows 95), among other things. How can I get GNOME Shell working again?
Gnome shell and classic gnome load fine under other users.
I installed fedora 15 on intel centrino with 1 GB RAM but GNOME 3 gets failed on loading and show a msg :
GNOME 3 Back Failed !!
I am trying to access information inside a windows partition using a visual box, which has Mandriva 2009.1 installed as a guest OS. me to mount the windows partition.
View 7 Replies View RelatedI am trying to install Fedora 12 using the x86-64 DVD. My problem is everytime I try to install with the normal settings or basic video deriver setting it says "X failed to load" and so Anaconda never loads. How do i fix this problem. I have an Nvidia 7800GTX.
View 1 Replies View RelatedI am having some problems installing Fedora 15 64-bit. I use the install DVD. I have an AMD Phenom and a NVidia 8600GTS. When I install using the normal method, my screen freezes somewhere in the settings screen for choosing the computer name. If I use the basic video driver for installing I have no problem. However after everything is installed, and Fedora starts, Gnome says that it failed to start and some features are not available.
I found some information at [URL] that I tried. However after installing kmod-nvidia and rebooting I no longer see any graphical display. A lot of text is on the screen without any error, but no x-windows appears. What can I do to install Fedora correctly and have a good working system? Is the 32-bit version easier to get it working? How can you recover from a system that does not start? What I could do to recover from it.
i have installed Fedora 15 from USB and it error
Quote:
GNOME 3 Failed to Load
Unfortunately GNOME 3 failed to start properly and started in the fallback mode.This most likely means your system (graphics hardware or driver) is not capable of delivering the full GNOME 3 experience.
.The interface is now Gnome 2. I have not change screen resolution 1280�720, now is 1024x768.
Result of xrandr -q
Quote:
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 1024 x 768, current 1024 x 768, maximum 1024 x 768
default connected 1024x768+0+0 0mm x 0mm
1024x768 0.0*
I think I'm ready to install Linux openSUSE physical on my Laptop. NO VMware Workstation anymore...But before I can do that I must be sure that Linux works on my System.--- SYSTEM ---
System: TOSHIBA Satellite A300D-13A (PSAK4E-01F00VGR)
CPU: 2x AMD Turion� 64 X2 Mobile Technology TL-64
--- NETWORK ---
[code]....
OK, should be enough for the first, ask if I forgot some Hardware...Because I can't find any driver, and I'm not sure. I'm a LINUX NOOOOOOOOOB!!I really want to install Linux openSUSE, I'm MICROSOFT/WINDOWS HATER since 1 month now!! PS: Wine can't start my favorite Programs like Project64 a N64 Emulator. It fails to start a game! I think the graphic plugin crashes... | The exact error message is: "Failed to extract ZIP Archive" or "Failed to load file".
I`am trying to install drivers for a very old graphics card GeForce2 GTS/Pro on Suse 11.2. I downloaded driver NVIDIA-Linux-x86-71.86.13-pkg1.run and install it successfully. But when I launch "sax2 -r -m 0=nvidia" it crushes with error "isax: could not import file: /var/cache/sax/files/config at /usr/sbin/isax line 199"
[Code]....
I'm running Fedora 15 with Gnome 3. I installed Gnome-Do using 'yum install gnome-do'. I opened it from the Terminal by typing 'gnome-do' but I keep getting an error message that says
Could not load desktop item: libgnome-desktop-2.so.17
Gnome-Do opens but it doesn't display any application I search for and when I try opening the Gnome-Do preferences, it quits.
I installed gnome-desktop-2.32.0-8.fc16.i686.rpm from here: [url] and then installed Gnome-Do. Everything works fine now.
Whenever I boot up Fedora 15 on Virtual Box, I get the message " gnome 3 could not load " and I installed all the packages needed to install Guest Additions, but even when I mounted the file, the ONLY file I could find online that was VMBoxGuestAdditions.iso or something like that, I mounted it, I tried installing, but nope, it gives me an error message that it can't. I have the latest version of VirtualBox and I've been on several forums and looked at many places but I can't fix it. I also have a problem where when I boot it up it says " the system is optimized to support 32 bit but it is currently 64 bit go here and click this to fix it " or something like that. and I can't figure out how to fix it in Virtual Box.
View 1 Replies View Relatedi installed ubuntu 11.04 on my presario cq40-115au but it does not load the default gui (unity). i only see a blue background and an icon of my other partition on desktop. even alt+F2 does not pop the "run application" windows. anyone had the same issue? especially with radeon hd3200?
View 6 Replies View RelatedWhen my server starts I received this text:No kdump kernel image found:[WARNING]Tried to locate /boot/vmlinuz-2.6.18-164.6.1.el5.centos.plusLoading kdump:[FAILED]
View 4 Replies View RelatedI'vd a problem with loading modules. Booting gives the this error:
Code: Select alllucas@debian8-1:~$ systemctl --failed
UNIT LOAD ACTIVE SUB DESCRIPTION
● systemd-modules-load.service loaded failed failed Load Kernel Modules
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
[Code] ....
Always the same error when booting. After a period of time, (Graphical User Interface) the mouse click no longer operates, also text input isn't possible.
I had no access to the system at all, even crt alt F1 stopped working, also text input was no't possible. so reinstall was the only option. Maybe there is a connection with this two errors.
I've reinstalled Debian 8 several times. Still, both errors stay.
The same happend again (in the GUI) is nothing possible, no txt input, no mouse click), but now I have access to the system, ctr/alt F1 is working.
After regular upgrade (I am using Unstable) I boot my system today but failed to load X using xinit (which I always use). Using startx X loads but leaves it unusable, both mouse and keyboard don't work (I never use startx really as regular user but in root). The message is:
Code: Select allxf86OpenConsole: Cannot open /dev/tty0 (No such file or directory)
In my /etc/X11/Xwrapper.config I changed "allowed_users=console" to "allowed_users=anybody" and that doesn't work.
I was playing around with QT5 today and I am getting the error Gtk-Message: Failed to load module "canberra-gtk-module". Searching suggested that the module may not be installed however it looks like it is to me.
Code: Select allii libcanberra-gtk3-0:amd64 0.30-2.1 amd64 GTK+ 3.0 helper for playing widget event sounds with libcanberra
ii libcanberra-gtk3-module:amd64 0.30-2.1 amd64 translates GTK3 widgets signals to event sounds
ii libcanberra-pulse:amd64 0.30-2.1 amd64 PulseAudio backend for libcanberra
ii libcanberra0:amd64 0.30-2.1 amd64 simple abstract interface for playing event sounds
[code]....
i am trying to run compiz it runs but i get this error
compiz (cube) - Warn: Failed to load slide: freedesktop
and then most of the plugins dont work . kwin uses alot of cpu resources so i am using compiz
When I start my computer GRUB starts, but it only says:Grub Loading stage1.5.Grub loading, please wait...and nothing happensHere is what happened before:I had a dual boot on my computer with Windows and Ubuntu. There was also a problem with Windows, but that's another thing. Now I had not upgraded Ubuntu for a long time. I think I still had Ubuntu 8.9 . So I wanted to upgrade and let Ubuntu do it automatically, it showed the upgrade to 9.4. So let it upgrade, but it asked if it had to change menu.lst, but since I had menu.lst modified in the right way, I choose the option to keep the already installed version. But it just kept asking the same question, so 4 or 5 times and a few hours later I choose the option to change it to the default package version. Then it didn't ask this anymore, but it hung at a later stage.
So I waited several hours longer, but it didn't proceed anymore, so I had to shut it down.It shut down OK, but then when I restarted, what I described above happened.Now I have another problem, my disk reader (CD/DVD) doesn't work either, so I cannot simply use a LiveCD.
I have a problem loading ipmi drivers. The program responsible for the loading fails on a first one (ipmi_ msghandler.ko) and quits
View 1 Replies View RelatedI have had a few X crashes and started to suspect compiz as they usually happened when I was resizing a window or the window was wobbling.
Here is the Xsession-errors log (it's a hidden file in your home folder). It mentions:
Code:
WARNING: Application calling GLX 1.3 function "glXCreatePixmap" when GLX 1.3 is not supported! This is an application bug!
Starting gtk-window-decorator
Unable to find a synaptics device.
[Code].....
My nvidia graphics driver was updated last night, and since then I've been unable to get into Gnome without resorting to low graphics mode. I have extensive knowledge of Windoze systems. Upon boot up, I get the following error:
(EE) NVIDIA(0): Failed to load NVIDIA kernel module!
(EE) NVIDIA(0): *** Aborting ***
(EE) Screen(s) found, but none have a usable configuration
I've tried some troubleshooting, including attempting to uninstall all nvidia drivers and reinstall (via synaptic).
Administration->Hardware Drivers reports that version 173 is installed loaded and active. Nvidia X Server Settings (nvidia-settings) gives me the "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server." error.
I've tried the nvidia-xconfig (both with gdm up and down) and it hasn't made any difference.
Oh, it's a GeForce 6200 wwith two Dell E193FPp monitors running on Ubuntu 10.04.
Here's my xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Fri Mar 12 01:42:27 PST 2010
Section "ServerLayout"
[Code].....
My laptop broke beyond repair recently so I am stuck on a 6 year old hp pavilion zv5000 given to me by a friend and I thought I may as well give linux a go, I have been meaning to for years. I've installed xubuntu 10.04 as I heard it is less resource intensive than normal ubuntu but have been unable to configure the nvidia graphics card. I used the hardware drivers program which installed the nvidia accelerated graphics driver 96 (which was the recommended version) and then ran sudo nvidia-xconfig as instructed and got
Code:
Warning: Unable to locate/open X configuration file.
New X configuration file written to '/etc/X11/xorg.conf'
Which I presume means it worked correctly, but whenever I try to boot I get a message saying "failed to load nvidia kernel module", at which point I either have to restore the generic configuration or just start the session in low graphics mode. I have googled the problem and in a lot of peoples cases it seems to be linked to upgrading from a previous version whilst mine was a fresh install. I tried sudo modprode and it says the nvidia module isn't present. I tried installing the packages in synaptic which mentioned nvidia kernel modules but still no luck.