I have installed on my computer Fedora 10, now I want to install opensuse and create a dual boot environment and I want to have them both on the same hard disk. how to carry on with this task?
View 7 RepliesToday I decided to give Fedora15 a shot, mainly because of Gnome3, and so decided to install it over my Ubuntu installation. This is my partition scheme:Two NTFS partitions for Windows;
One logical partition, which inside has:
/dev/sda5 for /boot
/dev/sda6 for /
[code]...
I am having 2 Hard Disk 1 is having RHEL 5 Installed And 2nd is having Windows XP, now i want to dual boot my PC with the help of this two Hard Disk? Can i Dual Boot with RHEL & Win XP having Installed in 2 different HD? what is the Procedure?
View 4 Replies View RelatedI'm having installation issues with linux. I'm trying to set up a dual boot with vista and linux. I prepared my computer by backing up my files and partitioning my hard drive, leaving 20GB for linux. I downloaded Linux Mint 7, and booted from USB (using the universal USB installer from pendrivelinux.com). All good, entered into linux and installed by following the prompts (selecting use largest unallocated partition to point linux to the partition). At this stage the screen cleared to just leave me with the desktop background.
I patiently waited for it to reboot which never happened. So I waited for 20mins or so, then shut the computer down because I couldn't think of what else to do. When I restarted (without using the livecd/usb) it just went straight to vista. I did a bit of reading and found it might have been something to do with vista taking over grub, and some of the tutorials suggested downloading EasyBCD. So I did that, here's the summary:
Code:
There are a total of 2 entries listed in the Vista Bootloader.
Bootloader Timeout: 30 seconds.
Default OS: Linux Mint 7
Entry #1
Name: Microsoft Windows Vista
BCD ID: {current}
Drive: C:
Bootloader Path: Windowssystem32winload.exe
Windows Directory: Windows
Entry #2
Name: Linux Mint 7
BCD ID: {default}
Drive: C:
Bootloader Path: NST
st_grub.mbr
Code:
Windows Boot Manager
identifier {9dea862c-5cdd-4e70-acc1-f32b344d4795}
device partition=C:
description Windows Boot Manager
locale en-US
inherit {7ea2e1ac-2e61-4728-aaa3-896d9d0a9f0e}
default {bbf9569e-31e5-11df-a844-91f7867d7949}
resumeobject {3fb6bf64-700d-11db-8409-0016d303c867}
displayorder {3fb6bf63-700d-11db-8409-0016d303c867}
{bbf9569e-31e5-11df-a844-91f7867d7949}
toolsdisplayorder {b2721d73-1db4-4c62-bf78-c548a880142d}
timeout 30
Windows Boot Loader
identifier {3fb6bf63-700d-11db-8409-0016d303c867}
device partition=C:
path Windowssystem32winload.exe
description Microsoft Windows Vista
locale en-US
inherit {6efb52bf-1766-41db-a6b3-0ee5eff72bd7}
recoverysequence {572bcd55-ffa7-11d9-aae2-0007e994107d}
recoveryenabled Yes
osdevice partition=C:
systemroot Windows
resumeobject {3fb6bf64-700d-11db-8409-0016d303c867}
nx OptIn
Real-mode Boot Sector
identifier {bbf9569e-31e5-11df-a844-91f7867d7949}
device partition=C:
path NST
st_grub.mbr
description Linux Mint 7
Now when I turn my computer on, I get options for vista and linux. Vista works fine, but if I select Linux Mint 7 I get an error that reads "cannot load from harddisk, insert systemdisk and press any key".
My system has Windows XP Pro SP2 installed on /sda1 and originally a 10.04 on /sdb1-3, now upgraded to 11.04. The Ubuntu system works fine (teething troubles with nvidia drivers on upgrade but fixed now), and the Windows system shows up in the grub menu, but when it's selected, I just get `GRUB Hard Disk Error' and nothing else. Windows installed properly, and booted successfully until I installed Ubuntu in the first place. I can still access the files on that drive from within Ubuntu.
I've tried fixboot in the Win Recovery Console, which sounded like it did something, but didn't fix the problem. This problem isn't new to grub2, by the way - I just haven't needed Windows in a year.
I have a dual boot System with Ubuntu 10.04 Netbook Remix and Windows XP SP3 on an Asus eeePC 1000HE. I had some troubles with updating kernels etc. and I ended up with following problem:
After grub reinstall, I am able to boot Ubuntu, also I can mount the windows partition properly. Trying to boot into Windows, I get the error:
Code:
It's all on one hard drive which doesn't show any errors:
Code:
Partition table entries are not in disk order
Code:
Some partitions don't show a file system because they are luks-encrypted.
As I mentioned earlier, I am able to mount sda1. I think the problem is that the Partition Boot Sector is corrupted, even though I am not sure if the ntfs partition is damaged at all or if GRUB is the problem.
As I said I had problems with a kernel update and therefore had to reinstall GRUB. I think, but I am not sure, that I accidentally installed GRUB on sda1 (the windows partition) instead of on sda. After I installed GRUB on sda again, I was able to boot linux and fixed sda1 with testdisk. Before, sda1 showed as four partitions (sda1p1, ... , sda1p4). I was not able to mount sda1 till I fixed it with testdisk. testdisk says the Boot Sector of sda1 is OK, so does ntfsfix.
Finally, an extract from my /boot/grub/menu.lst:
Code: ...
The Windows XP entry is added by myself. I don't know much about grub, so there might be the error.
I tried to keep it as short as possible (this is only the end of the story), I hope I didn't forget anything important. Please ask if there is something not clear.
I am in Tanzania with this netbook, so it is not possible to boot Windows CD and fix the windows partition with it, also I don't have a very fast Internet connection.
Is there a way to fix this without a Windows CD? Maybe it is just a dumb mistake in the menu.lst?
i started ubuntu from 9.04 now using 10.10 on my laptop. problem started when my laptop motherboard got bad beyond repair, and i had installed ubuntu 10.10 on it along with windows 7 (grub, dual boot). now i have pc running windows 7 and installed ubuntu 10.10 using wubi. i want all the settings of my laptop ubuntu 10.10 (programs installed, themes, softwares other configurations etc) to be transferred to this new ubuntu (installed using wubi) on my pc. how to do that? i have attached my laptop hard disk to my pc and am able to boot that installation on my pc, but now i have decided to remove laptop hard disk and use the same settings on pc hard disk.
View 6 Replies View RelatedI am a novice in Linux but due to my academic requirement I had to install Linux (Fedora 8). I have 2 hard disk's (80GB & 20GB), on the first HD which is 80GB I have Windows XP and the other one I partitioned and installed Linux. Now the first problem is that, whenever I start my PC I get a error which says "GRUB hard disk error", however when I restart the machine it's fine and gives me the boot options.
Secondly, the HD containing windows was affected by virus so I had to format & reinstall XP. Strangely after that I am not getting any boot options and it's like windows is the only 1 OS running. But on windows the partition on which Linux is installed in intact. So I assume something is deleted maybe the Linux boot file.
I have a (slightly complicated) dual/multi boot system.
I keep getting boot errors (when choosing ubuntu from the grub2 menu)
Code:
Serious errors were found while checking the disk drive for /boot
If I switch off and restart, ubuntu will then start without issue.
My setup is like this ....3 disks, one with 10.10 clean install - so Grub2, separate partitions for /, /boot and /home, one with windows 7, one with windows XP and 10.04 wubi (this is my old disk which I will trash once I'm happy with my upgrade to 10.10 & 7 on separate disks.
I installed 7 and 10.10 with ONLY their disks installed. After both were working, I added all disks and rejigged the grub2 menu (using update-grub and StartUp-Manager).
This problem only seems to occur if my previous boot was not 10.10 ( I will investigate this further). It's as if something (grub2 ?, the bios ?) is remembering part of the previous boot and not using the grub2 menu completely.
I have a sata 320 gb with mandriva linux 2009.1 on it.And it is what curently atached to my cpu. It is shown as 'sda' in the partition table.I also have another 40gb hard disk with windows xp installed on it.It is shown as 'hda' in the partition table . Now what i want to do is attach this 40gb hard disk to my pc and configure grub on my 320gb hard disk('sda') so as to boot windows xp(which is residing on the second hard disk,'hda')Can anyone tell me if what im doing is feasible or not? If it is feasible,can anyone suggest me how to get it working. I know i just need to add 2-3 lines to my grub.conf, but dont know what exactly i need to write.
View 3 Replies View RelatedAcer Travelmate laptop, 1.3GHz Pentium M, 12MB Ram.pensuse 11.4 (upgraded from 11.3)Vanilla install, not running anything special, always startup and shutdown from scratch, never sleepFor several minutes after KDE appears and I open an app (any app, e.g. Chrome) the hard disk is going nuts. WTF is it doing and how do I stop it? Also some programs take years to start, e.g. digicam took TEN minutes the other day even after waiting a while after booting, the disk thrashing the whole time. But in 11.3 it started almost instantly.
View 9 Replies View RelatedI've recently added a new hard disk and due to mother board controllers this new hard disk is known as sda.Before that my boot partition was /dev/sda3 and know this changed to sdb3.Whenever grub menu appears and I choose opensuse,it can't find /dev/sda3 .It seems that I should edit menu.lst or change boot loader parameter.something like root (hd1,2).But I don't how I can do this with opensuse boot loader.Though I could do this with CentOS easily.
View 7 Replies View Relatedpartitioning my hard drive to dual boot windows 7 and open suse
View 2 Replies View RelatedWe were trying to install w7 on a reserved partition. W7 did not like the partition (whatever we tried).
Since we had 3 hard-drives, on the allocated drive we deleted all partitions and set the partition table type new to MSDOS (yast etc.....).
W7 installed fine. We did not time it, but it appeared that 11.3 installs faster plus considering 11.3 installs quite a number of applications.
There are plenty of postings re integrating W7 to the Grub-menu.
This system went through several Suse updates, hardware upgrades, basically was all over the place.... we did a "new" install of 11.3 allocating its own hard-drive.
Install......fine, and Grub entered W7 to the menu. Worked ! Mounted the windows partition to /home/yourusername/windows
So, if you really (?) need W7 and have a spare hard-drive, this maybe is a clean solution.
I currently have Windows 7 installed on my laptop and I would like to dual boot w/ Fedora on the same hdd.I have two NTSF partitions, I shrunk my D drive 50GB for ext4 & swap.I've tried both liveusb-created & unetbootin to create a bootable USB to install Fedora.Anaconda starts up and I get through most of the install configuration, I set up GRUB & the partitions. Once I proceed to the next screen I get missing ISO image 9660 error My laptop doesn't have a DVD drive. It seems like a lot of people are getting this error, but I have found no concrete solution though.
How do I put the image on the drive? Windows can't read ext4 and I haven't been able to find a program that can.I have a USB to SATA adapter that I could hook up a DVD-ROM drive too, but I don't know if fedora will pick up on it.
How to correctly install F11 on the same disk as Windows. I have created the partition but can't tell what F11 install to use to setup as dual boot with Windows XP Pro 64bit.
View 2 Replies View RelatedI have read other posts regarding the installations of different distros on external hard disk, but these did not help..
I want to install fedora 12 on a new external hard disk, so that i can boot from it on any system that supports booting from usb hard disk, and do all my work from the extenal hard disk itself. I want to know the exact procedure to install fedora on extenal hdd, and what do i need to do, so that the grub, (which i will install on the /boot partition of external hdd), get detected by the primary boot loader of mbr..
Or, I just need to boot from external hard disk.. please any one try to make it possible.
i come from ubuntu installation and i have had opensuse before and i remember installing any of thede two without any problem on any of many harddisk arrangement. but thge ltest opensuse 11.3 doesnt pllay nice with my windows and ubuntu installation booting. i reember using boot loader in yast and it used to load the coorect setting from scratch. but now when i chose "propose new configuration" and it founds opensuse and three other windows!
[Code]...
i'm tying to dual boot Vista64 (already installed) and Fedora 10 x86_64. I am running a Dell XPS 410 running 2 sata hard drives raid 0 (ICH8DH). I started the process by shrinking my C drive on disk0 leaving 64.45GB of unallocated space. Next I rebooted into Fedora install DVD and when i get to blue graphical install screen i get message asking if my drive is GPT and if it is it may be corrupted. I click NO, and it comes up with a message telling me i have to initialize my drive if i want to use it ( have to click NO twice) and if i do it i will lose all my data.
i can click no and keep proceding through the install until i get to the partition setup screen. No hard drives or partitions are shown. I've tried googling the problem and get bits of pieces of information scattered in different parts but nothing conclusive to my problem i think. As far as my background of knowledge goes, I'm new to the linux community but give me a thorough guide and i'll do fine (i hope). I've been using fedora on a separate laptop for 2 days now .
I installed the live CD version of fedora (dual boot with vista) on my laptop. After I connected to the internet the updates downloaded and all went well. however when i restarted at the boot screen I found two instances of fedora such as
Fedora(2.6.27.9-159.fc10.i686)
Fedora(2.6.27.5-117.fc10.i686)
Other
The "other" is vista. I am wondering if this is OK or whether I have two fedora. If so i would like to remove one of them to save disk space.
I have 2 IDE drives, Windows XP is on the Master drive & Fedora 12 is on a partition the other drive. I purposely installed the Linux boot loader on the same drive as Fedora because want to use NTLDR as the primary boot loader. According to a guide I found [URL], I should be able to copy the Linux boot sector to a file & put that copy on the Windows drive & then modify boot.ini, so I am prompted to with an OS choice a startup.
The problem is the command the guide gives to copy the Linux boot sector (dd if=/dev/hdb1 of=bootsect.lnx size=512 count=1) has outdated syntax and does not work. What syntax would make this command work in Fedora 12? Another guide I found ([URL]-vista-already) suggested using: Grub4Dos & modifying boot.ini. This method almost worked until grub gave an error that there was no kernel loaded. What would I type into the grub prompt to load the kernel? How would I automate the loading of the kernel, so I don't have to specify the kernel each time?
I have two internal harddisk. Harddisk 1 has ubuntu, fedora installed and harddisk 2 has ubuntu installed. I normally connect either one, and use it. How can i always keep connect both harddisks, and at the start, select from which harddisk to boot? Or it's not possible?
View 7 Replies View RelatedPartition info:
sda2: Win7
sdb1: /boot
sdb2: LVM, containing , home, swap...
[code]....
I am quite experienced user of Ubuntu desktop / server distributions. Recently my desktop 9.10 disk failed and I decided to reinstall using 10.04. My configuration is a dual disk dual bot system. I have XP Pro SP3 on one disk and Ubuntu 10.04 on second. XP has own, untached MBR ubuntu got Grub 2 installed on the same disk as Ubuntu. Ubuntu disk is booting first in BIOS. Grub 2 detected both system, however I can boot only to Ubuntu. When I am trying to boot XP I got black screen only. Looks like booting is stack in BIOS stage, because crt+alt+del reset system.
I read Ubuntu forum, search Google and did not come with any solutions. My XP MBR is OK. I can boot directly, choosing XP HDD in BIOS as a starting disk. All entries in grub.cfg looks fine to me. I made 3 different clear installations of Ubuntu. Each with the same result. I reinstaled Grub2 with no effect. I wonder if this may be a hardware/Grub 2 compatibility issue. I am using quite old components.My motherboard is Assus P4C800 Delux. I have 5 HDDs 2 CD. Exactly the same configuration was OK with 9.10/XP dual disk dual boot using Grub legacy.
[Code]...
I created a thread about a problem a I had with my hard disk clicking whilst idle little while ago and I may now have stumbled upon a possible solution. The strange thing with the problem is that Ubuntu/Kubuntu didn't cause this problem but Opensuse 11.2 does.
I installed Fedora 13 to have a glimpse of what all the fuss was about and noticed that I had the same problem (hard disk clicking whilst idle ~ every 20 secs or so). Now there's a wiki on this subject and a few bug reports: [url]
Problem Description
Some ATA harddrives perform very frequent head unloads under Linux significantly shortening their lifespans. Root cause
The inactivity timer for head unload is configured too aggressively either via ATA APM (Advanced Power Management) feature or other non-standard means. Such aggressive settings are very fragile to changes in IO pattern and under Linux many such drives unload their heads only to re-load them shortly. Note that this relentless unloading/reloading cycle can also be triggered under Windows by installing programs which can alter the IO pattern (e.g. certain vaccine programs which runs in background).
Now two of the listed models with this problem are basically identical to my model (Dell Inspiron 1520) and basically share the same hardware: Dell Vostro 1500 and XPS 1520.
The workaround listed is to:
set APM to 254
Furthermore, there is a script: Storage-Fixup which can also be downloaded from opensuse software search. Indeed there is a report of this for a Vostro 1500: Gmane Loom
The report suggests looking at: Disk Power Management - openSUSE which lists a method to create a configuration file to management disk power management:
My question is whether I could download the storage-fixup rpm [url] has a description of it and it can be found: Software.openSUSE.org) and install it to (hopefully) solve the issue or should I follow the method given in: Disk Power Management - openSUSE
to set APM to 254:
Code:
after installing Ubuntu on one WD 500 GB hard disk and after making mistake and pasting wrong code into Terminal:my OTHER WD 500 GB hard disk that was also in the system (I guess it was "hd1") - died.The problem must be, I guess, I typed wrong code: "hd1,1" instead of "hd0,0".)500 GB (NTFS) of data was on that other (non-Ubuntu) hard disk, and now I can not access it anymore. While booting, system gives "Hard Disk Error" warning and stops.One again: I installed Ubuntu od one hard disk and at the end of instalation I pasted wrong code for GRUB, giving address of another hard disk. Now that other hard disk has error and will not work
View 3 Replies View RelatedI want to copy hard disk have ubuntu 10.04 and ext4 to 1000 hard disk for new 1000
View 2 Replies View RelatedI had a dual boot (windows 7 + debian), both of them installed in my internal hard disk, with the GRUB in it. I have recently installed a second linux distro (mint), but I put it in an external hard disk. Now the GRUB allows me to boot any of the three operating systems, but I need the external disk to do it. It seems that after the mint installation the GRUB is now working from the external disk (if the external disk is not connected, the machine does not boot.) �Is there a way to change the location of the GRUB, to the internal hard disk of my laptop?
View 2 Replies View RelatedI have Ubuntu on my PC. I have found a hard disk with XP on it and put it in the PC because I wanted to make a dual boot configuration. I've already modified menu.lst. The problem is that when I choose from grub menu to start XP, it shows 'Starting up ...' and nothing happens. If I choose to boot ubuntu (sda), it boots ok. Well this happens if in BIOS boot priority is given to ubuntu' hard disk. If it's given to hard disk with XP on it (sdb), it loads normally (from its own mbr) but obviously there's no dual boot option.
I added this at the end of menu.lst:
titleMicrosoft Windows XP
rootnoverify(hd1,0)
savedefault
makeactive
chainloader+1
How can I make an operating dual boot configuration?
I was using Terminal and browsing a directory in my home folder. My "home" directory is located on "/dev/sdb1". When in Terminal I typed "ls" in one of my directories and the output was garbage. The output didn't show the files in the directory. I think it said something like, "input/output error". Unfortunately, I didn't write the exact error down. Instead I rebooted.The hard disk with the problem is:
Code:
$ sudo hdparm -I /dev/sdb
[sudo] password for brian:
[code]...