Ubuntu :: Dual Boot From Old XP Disk ?
Oct 15, 2010
I have Ubuntu on my PC. I have found a hard disk with XP on it and put it in the PC because I wanted to make a dual boot configuration. I've already modified menu.lst. The problem is that when I choose from grub menu to start XP, it shows 'Starting up ...' and nothing happens. If I choose to boot ubuntu (sda), it boots ok. Well this happens if in BIOS boot priority is given to ubuntu' hard disk. If it's given to hard disk with XP on it (sdb), it loads normally (from its own mbr) but obviously there's no dual boot option.
I added this at the end of menu.lst:
titleMicrosoft Windows XP
rootnoverify(hd1,0)
savedefault
makeactive
chainloader+1
How can I make an operating dual boot configuration?
View 1 Replies
ADVERTISEMENT
Dec 30, 2010
I have a (slightly complicated) dual/multi boot system.
I keep getting boot errors (when choosing ubuntu from the grub2 menu)
Code:
Serious errors were found while checking the disk drive for /boot
If I switch off and restart, ubuntu will then start without issue.
My setup is like this ....3 disks, one with 10.10 clean install - so Grub2, separate partitions for /, /boot and /home, one with windows 7, one with windows XP and 10.04 wubi (this is my old disk which I will trash once I'm happy with my upgrade to 10.10 & 7 on separate disks.
I installed 7 and 10.10 with ONLY their disks installed. After both were working, I added all disks and rejigged the grub2 menu (using update-grub and StartUp-Manager).
This problem only seems to occur if my previous boot was not 10.10 ( I will investigate this further). It's as if something (grub2 ?, the bios ?) is remembering part of the previous boot and not using the grub2 menu completely.
View 2 Replies
View Related
Jun 5, 2010
I am quite experienced user of Ubuntu desktop / server distributions. Recently my desktop 9.10 disk failed and I decided to reinstall using 10.04. My configuration is a dual disk dual bot system. I have XP Pro SP3 on one disk and Ubuntu 10.04 on second. XP has own, untached MBR ubuntu got Grub 2 installed on the same disk as Ubuntu. Ubuntu disk is booting first in BIOS. Grub 2 detected both system, however I can boot only to Ubuntu. When I am trying to boot XP I got black screen only. Looks like booting is stack in BIOS stage, because crt+alt+del reset system.
I read Ubuntu forum, search Google and did not come with any solutions. My XP MBR is OK. I can boot directly, choosing XP HDD in BIOS as a starting disk. All entries in grub.cfg looks fine to me. I made 3 different clear installations of Ubuntu. Each with the same result. I reinstaled Grub2 with no effect. I wonder if this may be a hardware/Grub 2 compatibility issue. I am using quite old components.My motherboard is Assus P4C800 Delux. I have 5 HDDs 2 CD. Exactly the same configuration was OK with 9.10/XP dual disk dual boot using Grub legacy.
[Code]...
View 9 Replies
View Related
Jan 10, 2010
I have a new win7 system with a 500GB HD. What is considered the safest way to partition the disk before installing Ubuntu?
View 9 Replies
View Related
Feb 17, 2010
I have been running Ubuntu 9.10 and Win XP Professional as a dual boot system, with each OS on its own HDD, smoothly and seamlessly since the release of 9.10. Yesterday one of my kids got a video file from a friend and it had a virus along with it. Long story short, in the process of trying to repair it Windows shuddered it last agonizing breath.
Now I have to re-install Windows because some of the programs the schools make them use require Windows. How do I go about doing this without damaging my Ubuntu installation? Will re-installing on a second drive affect GRUB?
View 9 Replies
View Related
Apr 21, 2010
I killed Win XP awhile back, but there are a couple games I need to format for Ubuntu to use, using XP to get there.
I have Ubuntu LTR. I formatted disk to install XP. I installed XP. I can't boot into Ubuntu anymore unless from a live CD. From Live CD, I can see my Ubuntu is still there, but from XP, disk manager it shows that space as empty (free). How can I dual boot, now? Please don't tell me I need to reinstall Ubuntu, I may cry. Any help is appreciated and my apologies if my search didn't get me the answers, the other similar problems I saw were in reverse order (Linux onto drive after XP).
View 9 Replies
View Related
Jun 29, 2010
When I split the partition in my windows system, my harddisk was converted to Dynamic Disk. Now I want to install dual-boot with Ubuntu on my computer, is it do-able? How?
View 1 Replies
View Related
Feb 16, 2009
I am building a new PC from scratch and want to dual boot XP and Ubuntu. I have two 1TB drives. I was planning to run RAID 1, whereby one drive would mirror the other drive, and install XP, Ubuntu, and all data on the single drive. Now Im thinking maybe I should reserve the 1TB drive for data and install two smaller drives, one to hold XP and one to hold Ubuntu and their respective programs. In this latter config, the OS and programs would not be mirrored. Im new to dual booting and linux.
View 1 Replies
View Related
Aug 17, 2010
I am having 2 Hard Disk 1 is having RHEL 5 Installed And 2nd is having Windows XP, now i want to dual boot my PC with the help of this two Hard Disk? Can i Dual Boot with RHEL & Win XP having Installed in 2 different HD? what is the Procedure?
View 4 Replies
View Related
Feb 26, 2010
I recently made the move from windows to Linux and I am happy to having got rid off all the MS stuff. Trying out a few distros I decided on using Ubuntu and Mandriva (wife likes the flashier stuff, what can I say ).
My question is how can I partition my hard disk in such a way that my /home is separate from both the Ubuntu and Mandriva part but accessed by both as my default home folder.
View 1 Replies
View Related
Jan 27, 2011
I'm fairly new to ubuntu. I set up dual boot with 10.4 (64bit) on a machine with windows 7 installed first.Everything worked just fine but it seems that there is a bunch of unallocated space on my hard drive. Can anyone explain what all the different partitions are and if/how I can "clean it up"?
View 3 Replies
View Related
Sep 18, 2009
How to correctly install F11 on the same disk as Windows. I have created the partition but can't tell what F11 install to use to setup as dual boot with Windows XP Pro 64bit.
View 2 Replies
View Related
Nov 1, 2009
I have installed on my computer Fedora 10, now I want to install opensuse and create a dual boot environment and I want to have them both on the same hard disk. how to carry on with this task?
View 7 Replies
View Related
Jan 9, 2011
I have a Centos 5.5 system that had 2 primary partitions (2nd is setup as LVM with multiple LVM partitions) and then installed Windows 7 as Dual Boot.
However, Windows 7 has installed a 200MB system partition which is GPT/EFI as partition 3 and the Win7 OS as a Primary Partition.
I have a heap of space undefined after this fourth primary partition.
However, as 4 primary partitions have been used, I can no longer create an extended partition to utilise this.
As such I would like to know what is the best and safest way to proceed, and if possible step by steps instructions for the best option eg:
1. Delete the Windows 7 System Partition and create the extended partition (I expect this will prevent Windows from booting)
2. Use something like partition magic to change the Win 7 OS Partition 4 to an extended partition (Not sure if this will work)
3. Make changes to the overall system including both Linux and Windows so that it will use GPT only (I have
had no experience with GPT so this is a bit scary)
4. Other?
View 2 Replies
View Related
Feb 13, 2010
I've been wanting to do this for a while and after upgrading some of my pc components I decided I would finally try to dual boot with full disk encryption on both windows 7 and Ubuntu 9.10. I managed to encrypt the windows drive with truecrypt and that worked. I installed Ubuntu 9.10 using the alternate cd and everything but /boot is in an encrypted LVM. Each OS is on a separate SATA drive the windows is on sda1 and ubuntu /boot is sdb1.
To setup the dual boot I started out following the tutorial [url] but its for XP and versions of ubuntu that use grub not grub 2. I ran dd as posted and saved the files it produced from truecrypt. I then ran into some problems with grub reinstallation so I simply reinstalled Ubuntu 9.10 from scratch again. This put grub 2 on the computer. I've managed to get it to add a Windows 7 option.
However, when the option is selected truecrypt comes up and says that the bootloader is corrupted and that I need to use the repair CD I burned before I encrypted the drive. My question is does anyone have any experience dual booting using Truecrypt on Windows 7 and LUKS/dm-crypt on Ubuntu 9.10 with grub 2? And how would I get the boot menu to work? I'd rather not reinstall but if I have to I have images from right before I encrypted so it wouldn't be the end of the world.
View 4 Replies
View Related
May 9, 2011
My system has Windows XP Pro SP2 installed on /sda1 and originally a 10.04 on /sdb1-3, now upgraded to 11.04. The Ubuntu system works fine (teething troubles with nvidia drivers on upgrade but fixed now), and the Windows system shows up in the grub menu, but when it's selected, I just get `GRUB Hard Disk Error' and nothing else. Windows installed properly, and booted successfully until I installed Ubuntu in the first place. I can still access the files on that drive from within Ubuntu.
I've tried fixboot in the Win Recovery Console, which sounded like it did something, but didn't fix the problem. This problem isn't new to grub2, by the way - I just haven't needed Windows in a year.
View 9 Replies
View Related
Jul 20, 2011
Dual boot PC, boot disk and WIN XP are on good disk, Ubuntu was installed on failed disk. (I prefer separate disks for each OS).
I know I will need to reinstall Ubuntu later, and of course, GRUB2 now crashes without the Ubuntu disk.
Confirm that the only thing I need to do when I get the new drive installed and partitioned is to boot my XP disk in Recovery Mode and type "fixmbr", (then reboot to confirm clean WIN operation on the existing disk) then install Ubuntu as normal on the new disk.
View 1 Replies
View Related
Oct 1, 2010
I have a dual boot System with Ubuntu 10.04 Netbook Remix and Windows XP SP3 on an Asus eeePC 1000HE. I had some troubles with updating kernels etc. and I ended up with following problem:
After grub reinstall, I am able to boot Ubuntu, also I can mount the windows partition properly. Trying to boot into Windows, I get the error:
Code:
It's all on one hard drive which doesn't show any errors:
Code:
Partition table entries are not in disk order
Code:
Some partitions don't show a file system because they are luks-encrypted.
As I mentioned earlier, I am able to mount sda1. I think the problem is that the Partition Boot Sector is corrupted, even though I am not sure if the ntfs partition is damaged at all or if GRUB is the problem.
As I said I had problems with a kernel update and therefore had to reinstall GRUB. I think, but I am not sure, that I accidentally installed GRUB on sda1 (the windows partition) instead of on sda. After I installed GRUB on sda again, I was able to boot linux and fixed sda1 with testdisk. Before, sda1 showed as four partitions (sda1p1, ... , sda1p4). I was not able to mount sda1 till I fixed it with testdisk. testdisk says the Boot Sector of sda1 is OK, so does ntfsfix.
Finally, an extract from my /boot/grub/menu.lst:
Code: ...
The Windows XP entry is added by myself. I don't know much about grub, so there might be the error.
I tried to keep it as short as possible (this is only the end of the story), I hope I didn't forget anything important. Please ask if there is something not clear.
I am in Tanzania with this netbook, so it is not possible to boot Windows CD and fix the windows partition with it, also I don't have a very fast Internet connection.
Is there a way to fix this without a Windows CD? Maybe it is just a dumb mistake in the menu.lst?
View 9 Replies
View Related
May 25, 2011
Today I decided to give Fedora15 a shot, mainly because of Gnome3, and so decided to install it over my Ubuntu installation. This is my partition scheme:Two NTFS partitions for Windows;
One logical partition, which inside has:
/dev/sda5 for /boot
/dev/sda6 for /
[code]...
View 14 Replies
View Related
Mar 19, 2010
I'm having installation issues with linux. I'm trying to set up a dual boot with vista and linux. I prepared my computer by backing up my files and partitioning my hard drive, leaving 20GB for linux. I downloaded Linux Mint 7, and booted from USB (using the universal USB installer from pendrivelinux.com). All good, entered into linux and installed by following the prompts (selecting use largest unallocated partition to point linux to the partition). At this stage the screen cleared to just leave me with the desktop background.
I patiently waited for it to reboot which never happened. So I waited for 20mins or so, then shut the computer down because I couldn't think of what else to do. When I restarted (without using the livecd/usb) it just went straight to vista. I did a bit of reading and found it might have been something to do with vista taking over grub, and some of the tutorials suggested downloading EasyBCD. So I did that, here's the summary:
Code:
There are a total of 2 entries listed in the Vista Bootloader.
Bootloader Timeout: 30 seconds.
Default OS: Linux Mint 7
Entry #1
Name: Microsoft Windows Vista
BCD ID: {current}
Drive: C:
Bootloader Path: Windowssystem32winload.exe
Windows Directory: Windows
Entry #2
Name: Linux Mint 7
BCD ID: {default}
Drive: C:
Bootloader Path: NST
st_grub.mbr
Code:
Windows Boot Manager
identifier {9dea862c-5cdd-4e70-acc1-f32b344d4795}
device partition=C:
description Windows Boot Manager
locale en-US
inherit {7ea2e1ac-2e61-4728-aaa3-896d9d0a9f0e}
default {bbf9569e-31e5-11df-a844-91f7867d7949}
resumeobject {3fb6bf64-700d-11db-8409-0016d303c867}
displayorder {3fb6bf63-700d-11db-8409-0016d303c867}
{bbf9569e-31e5-11df-a844-91f7867d7949}
toolsdisplayorder {b2721d73-1db4-4c62-bf78-c548a880142d}
timeout 30
Windows Boot Loader
identifier {3fb6bf63-700d-11db-8409-0016d303c867}
device partition=C:
path Windowssystem32winload.exe
description Microsoft Windows Vista
locale en-US
inherit {6efb52bf-1766-41db-a6b3-0ee5eff72bd7}
recoverysequence {572bcd55-ffa7-11d9-aae2-0007e994107d}
recoveryenabled Yes
osdevice partition=C:
systemroot Windows
resumeobject {3fb6bf64-700d-11db-8409-0016d303c867}
nx OptIn
Real-mode Boot Sector
identifier {bbf9569e-31e5-11df-a844-91f7867d7949}
device partition=C:
path NST
st_grub.mbr
description Linux Mint 7
Now when I turn my computer on, I get options for vista and linux. Vista works fine, but if I select Linux Mint 7 I get an error that reads "cannot load from harddisk, insert systemdisk and press any key".
View 5 Replies
View Related
Apr 23, 2010
how much disk space a non manual dual boot uses? I've always been guided by a person knowing much about linux when doing my dual boot (and been guided to do the partitions manualy), but this person is not there for the moment and I need to do a dual boot on my son's computer. Since he'll need his Windows computer mainly for games I wouldn't want Ubuntu to take 2/3 of his disk space (which is about 250 Gb I think, let's say 50 Gb would be perfect for the Ubuntu)
And I'm not sure how I could change this later, cause in my own computer I cannot find how to resize (I cannot unmount neither resize the partitions I have) I don't mean I need to do this on my computer but I mean I wouldn't want to try out anything if I'm not sure it be could restored in 1,2,3. And partitions is such a thing. If I remember correctly I've done dual boot by default (i mean without doing the partitions manualy) and it does about 50/50 ?
View 2 Replies
View Related
Jul 27, 2010
I dual booted xp home ed with ubuntu netbook remix10.4 and in the grub loader (i did side by side install) it shows xp at the bottom (after ubuntu, ubuntu recovery mode, memcheck64 , xp
All of the loaders work fine (ubuntu loads fine, im typing this from ubuntu.) but xp will just say: Disk Read Error. Press Ctrl+Alt+Del
One hard drive is partioned 500GB HD ([440gb XP partition] + [60gb ubuntu])
View 9 Replies
View Related
Jun 7, 2011
i started ubuntu from 9.04 now using 10.10 on my laptop. problem started when my laptop motherboard got bad beyond repair, and i had installed ubuntu 10.10 on it along with windows 7 (grub, dual boot). now i have pc running windows 7 and installed ubuntu 10.10 using wubi. i want all the settings of my laptop ubuntu 10.10 (programs installed, themes, softwares other configurations etc) to be transferred to this new ubuntu (installed using wubi) on my pc. how to do that? i have attached my laptop hard disk to my pc and am able to boot that installation on my pc, but now i have decided to remove laptop hard disk and use the same settings on pc hard disk.
View 6 Replies
View Related
Sep 29, 2010
I have been having problems hibernating my windows 7 partition recently. It happened approximately right after I set up the dual boot.
I have found other topics where it says to make sure that the windows 7 partition is marked as the active partition. I have since done so and it has not changed anything. I did it with Partition Magic on Windows. I did find it suspicious though that my Dell Recovery partition is labeled as boot while the Windows one is marked as Active and System.
However when I looked at it using disk utility in Ubuntu the windows 7 partition is marked as Bootable while the recovery partition is not.
Hibernation works on Ubuntu with a couple error messages while shutting down and some weird screen issues while booting up. But it ends up working decently.
Under Disk Utility the Ubuntu Partition is not marked as Bootable. Should it be?
View 6 Replies
View Related
Jun 20, 2011
When i work in Ubuntu on a dual boot system with a shared NTFS data-partition where Windows is hibernated, and then reboot and continue working in Windows from the hibernated sesion, strange things happen. Files disappear, files that i worked on suddenly have the content of another file.
View 5 Replies
View Related
Jan 15, 2009
I installed the live CD version of fedora (dual boot with vista) on my laptop. After I connected to the internet the updates downloaded and all went well. however when i restarted at the boot screen I found two instances of fedora such as
Fedora(2.6.27.9-159.fc10.i686)
Fedora(2.6.27.5-117.fc10.i686)
Other
The "other" is vista. I am wondering if this is OK or whether I have two fedora. If so i would like to remove one of them to save disk space.
View 5 Replies
View Related
Oct 26, 2010
I was going to go ahead and intall Ubuntu 10.10 on my Windows XP w/sp3 Machine for a dual-boot config. I've done this before without issues but want to see what setup is Optimal giving my current disk drives.Here's my current setup in this picture. You can see I have my windows on Disk0 C: and the other 38GB on this drive Unallocated.
My other 80GB drive has Two 40GB windows file systems but I could erase one of those (Disk I to install Ubuntu on. Does it really matter? From what I recall Grub takes over fine and manages the boot. Thanks for any tips before install. Should I install on Unallocated on Disk0 or free up unallocated space on Disk1 for Install? thx
View 4 Replies
View Related
Nov 19, 2010
I have windows 7 installed on Disk2 (according to windows Disk Manager), and I installed ubuntu 10.10 on Disk0, choosing the dual boot option at installation.
However, grub does not load (presumably because its on disk0 and my machine appears to boot from disk3), so the machine goes straight into windows 7.
How do I get ubuntu to load?
View 2 Replies
View Related
Feb 3, 2010
I have XP on my IDE hard drive and Ubuntu on my USB hard drive (which is really an IDE drive with a USB adapter and external power souce). We've used Windows once in the past month, so we decided to jettison it. Two questions: 1. Can we simply delete all partiitions on the IDE hard drive and reformat or will this cause problems? 2 Is the write-speed gain worth switching the drives out, putting the Ubuntu drive in my IDE slot and my freshly wiped drive on the USB adapter?
View 3 Replies
View Related
Aug 13, 2010
I currently have a dual boot on my 160gb hdd, but even that feels cramped. i was wondering...I have a spare 40gb harddrive compatible with my laptop. could I just install the windows 7 installation there?
assumably i'd swap in the appropriate windows 7 hdd whenever i'd want to load windows 7 at Grub.
what do you guys think?
View 4 Replies
View Related
