Fedora Installation :: Dual Boot Vista - No Hard Drives Or Partitions Are Shown

Feb 9, 2009

i'm tying to dual boot Vista64 (already installed) and Fedora 10 x86_64. I am running a Dell XPS 410 running 2 sata hard drives raid 0 (ICH8DH). I started the process by shrinking my C drive on disk0 leaving 64.45GB of unallocated space. Next I rebooted into Fedora install DVD and when i get to blue graphical install screen i get message asking if my drive is GPT and if it is it may be corrupted. I click NO, and it comes up with a message telling me i have to initialize my drive if i want to use it ( have to click NO twice) and if i do it i will lose all my data.

i can click no and keep proceding through the install until i get to the partition setup screen. No hard drives or partitions are shown. I've tried googling the problem and get bits of pieces of information scattered in different parts but nothing conclusive to my problem i think. As far as my background of knowledge goes, I'm new to the linux community but give me a thorough guide and i'll do fine (i hope). I've been using fedora on a separate laptop for 2 days now .

View 9 Replies


ADVERTISEMENT

Ubuntu :: 10.04 / Vista Dual Boot Setup With 3 Hard Drives?

May 23, 2010

I have 3 hard drives: one with vista installed on it working fine, one with 10.04 installed on it and working fine and the last is just a media storage drive. Currently I have been unplugging the windows or ubuntu drive depending on which OS I want to boot. What do I need to do so that I don't have to physically disconnect the drives and can just pick which OS to boot on power up?

View 3 Replies View Related

Fedora Installation :: Dell Partitions - Trying To Dual Boot With Vista

Aug 24, 2011

Partition limit is 4 on my Inspiron 1525 so even with the space available I cannot create a Fedora partition because:

50MB for Dell Diagnostics
**GB main vista partition
10GB recovery partition
2.5GB MediaDirect partition

I'm trying to dual boot vista/fedora. I know I can delete the MediaDirect partition but that causes boot problems if the button is pressed while the power is off. I'm not sure which of the 3 Dell Partitions to remove.

View 2 Replies View Related

Ubuntu Installation :: Dual-boot Using Two Hard Drives?

May 1, 2010

this may be a very stupid question, but. My computer has two hard drives. One has Windows XP installed on it. The other is blank.

Is it possible for me to install Ubuntu onto the second hard drive, and run a dual-boot using GRUB during startup? Or does it only work when both OSs are on the same hard drive?

View 1 Replies View Related

Ubuntu Installation :: Dual Boot Across 2 Hard Drives?

May 4, 2010

I would like to install Ubuntu 10.04 on my new 1 TB hard drive. I currently have Windows XP installed on a 160 GB hard drive for things that I cannot do on Ubuntu. I would like to know if it's possible to install the other hard drive, and then dual boot Windows with it? Effectively dual booting across two hard drives. I wouldn't care if GRUB replaces the standard Windows bootloader, just as long as I can choose between the two at startup

View 9 Replies View Related

Installation :: Dual Boot Menu Setup 2 Hard Drives?

Jun 17, 2010

I need a suggestion on setting up a dual boot menu for my setup. I have two hard drives one with WinXP and a second one with CentOS 5.3 installed. I basically moved the hard drive from another identical machine to this one and so I want to setup a boot menu to access either windows or Linux. CentOS already has grub on it.

What is the simplest method of setting up the dual boot menu? I would like something which is easy to administer which I can just ghost over either the Linux drive or Windows drive or disconnect either and have either boot just fine. I don't ask for much do I?

If I have to go through a little process after ghosting over one or the other drives that would probably be ok. We get updated images for this machine and replace the image on the drives with new images, although Linux shouldn't be reimaged, just windows. So the Linux drive (2nd drive) should not be touched normally.

View 9 Replies View Related

Ubuntu Installation :: 10.04 And Windows 7 Dual Boot With Seperate Hard Drives?

Jun 21, 2010

I'm a n00b at dual booting and I plan on installing Ubuntu 10.04 on a separate hard drive than my Windows 7 64 bit one in a dual boot situation. I have read that you can do this by unplugging the Windows hard drive, install Ubuntu on the other one, and than plug the Windows hard drive back in and everything will be fine and dandy. Is this correct? If it is, will I have to manually set the Primary and Secondary drive (in the BIOS I think?), or will it automatically do that.

View 6 Replies View Related

Ubuntu Installation :: Natty Dual Boot On Separate Hard Drives

May 29, 2011

I've been trying to properly install grub for the past 3 days and failing every time.I recently bought a new computer and would like to dual boot Windows 7 64 and Natty. On my previous machines, ubuntu installer has automatically detected windows. It does not do so on this machine.I have three hard drives: 2 ssd's and a single 3 tb drive for storage.

I would like one ssd for windows 7 and one for natty.Currently, I am able to boot into both OS's but only by altering the boot sequence of the drives from the bios. I am hesitant to install grub to the windows drive for fear I will lose the ability to boot into windows. I did this early in the discovery process and ended up having to reinstall windows.

View 9 Replies View Related

Ubuntu Installation :: Repartition Hard Disc - Combine Two Unallocated Partitions To Install Windows 7 Dual Boot

Jul 28, 2010

I would like to combine my Linux partition (/sda3) and /sad1 to give me more disc space. I would also like to combine the two unallocated partitions to install a Windows 7 dual-boot with Ubuntu. How would I do that without totally raping my current Ubuntu install?

View 1 Replies View Related

Fedora Installation :: Dual Boot F10 With Vista

May 6, 2009

I have a PC with two 40 Gb hard drives. Vista is currently installed on drive 0. Nothing is installed on drive 1. If I switch cables to the drives, Vista will be installed on drive 1. Nothing will be installed on drive 0. If I then install Fedora 10 on drive 0, will it automatically detect Vista on drive 1 and allow me the option of using Grub or something else to boot it? I want to avoid having Vista overwrite my MBR, but I don't want to piss my wife off because she can't access windows for two weeks while I figure out how to customize Grub or install something else. If I need to customize Grub, (or some other boot loader), I would need step by step instructions. Is there a book or online tutorial?

View 4 Replies View Related

Ubuntu Installation :: Windows Vista Not Shown On Grub Boot Screen

Dec 31, 2010

I have just installed Linux on a partition of my hard drive. Computer boots up and gives me the grub boot screen where I can choose from: ubuntu, some memory tests and windows recovery environment (loader). But no Windows Vista. When I boot the windows recovery option the windows boot loading screen comes up but then the screen turns blank but the hard drive is still working and the wifi light also comes on my keyboard. Ubuntu is working completely fine I just need to find a way of getting Grub to display Vista instead of the Recovery environment.
Here is my Boot Info Script: .....

View 9 Replies View Related

Ubuntu Installation :: Stuck Installing 9.04 With Vista And Three Hard Drives

Jun 1, 2010

My smallest disc has the Vista loader and nothing else but I cannot select it for Dual Booting in the Ubuntu installation set up only for use as an entire disc which would delete the Vista Loader.

This is what I have:-
1st disc - no operating system much data
2nd Disc - empty except for Windows loader
3rd Disc - no operating system much stuff.

My original plan was to give Ubuntu all of the smaller second disc and I deleted everything ready to give it the entire hard disc. It was only when I went to install Ubuntu it I found the Vista loader lurking on disc 2 and the only option the install Ubuntu set up gave me for disc 2 was to use the entire disc (wiping out Vista loader) otherwise I could have installed Ubunbtu on another disc - which it reported as having no operating system.

If I put Ubuntu on disc 1 would I have a dual boot arrangement given that the installer saw no operating system on that disc ? Is there any (simple) way I can install Ubuntu on disc 2 and not loose the Vista loader? I am installing this version of Ubuntu as it was on the DVD that came with book "Beginning Ubntu Linux" It took me long time to Psych myself up to install it and when I did . . .

View 9 Replies View Related

Ubuntu Installation :: Two Hard Drives Vista On SATA Empty IDE

Jul 21, 2010

I have two drives one is a 500 gig SATA drive running Vista SP 2 now the other Maxtor 160 Gig drive is empty. I would like to install Ubuntu on that drive. Now I just though of installing from the setup however would this screw up my Vista partition ?

View 1 Replies View Related

Fedora Installation :: Only 11 Starts When Dual-boot Vista

Jun 11, 2009

One of the screens in the installer( middle of screen) will show what systems are on the grub menu, and one will be marked the default.

If the vista is not there (usually indicated by other), then click the add and select the correct boot partition (sda for vista) and change it's label to Windows Vista.

If other is there, click the edit button and change other to Windows Vista.

Finally, click the check box for the one you want to be the default boot. (you can always change that in the grub.conf later.)

View 14 Replies View Related

Fedora Installation :: Dual Boot With Windows Vista?

Aug 27, 2009

I have Windows Vista Home Premium and I don't want to switch entirely to Fedora because I'm not as familiar with it as I am Windows. I mainly wanted to install Fedora for my Linux class at the Community College I attend. How do I install it with a dual boot so it doesn't take over Windows Vista? I had that happen once and it was a mess to fix and reinstall Windows Vista too.

View 7 Replies View Related

Fedora Installation :: VirtualBox Or Dual Boot Vista?

Sep 13, 2010

I have been messing around with F13 in VM VirtualBox for awhile now. I have read in some places that it is better to install F13 into its own partition on the hdd creating a dual boot system for, in my case, Vista and F13. Any truth to this? I have been having problems with system settings in F13 while using VB. i.e.: sometimes the system will see 3d support, other times it won't. Sometimes it will see ethernet eth0 and then other times it won't. All my hardware from my MB to Display is supported according to the documentation I have looked at.

View 2 Replies View Related

Installation :: Unistall Windows Vista From An Ubuntu / Vista Dual-boot?

Mar 18, 2011

I have a single hard-drive on a spare computer and I decided to try out Ubuntu on recommendation from a friend. I really like it now but at first I just dual-booted it, and now I want Vista gone. I know it's unnecessary to have just one OS but my hard-drive isn't particularly big and I'd prefer to have Ubuntu by itself. Can anyone tell me how to eliminate vista and leave Ubuntu as my sole operating system (I've all my files from computer on another computer so I don't have to worry about losing anything).

View 2 Replies View Related

Fedora :: Windows Vista Installed On Hard Disk Partitions?

Jun 19, 2011

i've fedora 15 & windows vista installed on hard disk partitions.i can access windows files from fedora but how to view fedora files when i'm working on windows???

View 11 Replies View Related

Fedora Installation :: Fresh Install Of FC 11.4.0.82 With Vista For Dual Boot

Jan 12, 2009

I'm stuck with installing Fedora Core I have 2 hard drives both 80Gb I want to install a fresh copy on one of the drives to do a dual boot I have vista on the main hard drive this is where I am at Installation requires partitioning of your hard drive by default, a partitioning layout is chosen which is reasonable for most users. You can either choose to use this or create your owe. Select the drive to use for this installation?

View 10 Replies View Related

Fedora Installation :: Dual Boot With Vista - Grub Error 15

Mar 7, 2009

I am new to Fedora, having used Ubuntu for 2 years. However, I am a little dissappointed in the latest Ubuntu releases and want to try something new. So I installed Fedora 10 on my second hard drive, deleting Ubuntu. On my first hard drive, I have Vista installed. During installation I followed a guide for dual-booting and it said not to install Grub to the MBR of the Windows partition, so I followed that advice...

This caused a Grub error 15 on the next boot. I booted the Fedora installation from the second hard drive. My hypothesis is that the Grub bootloader of Ubuntu was still installed somewhere and it could not find the Ubuntu linux kernel. Therefore, it gave error 15. So I installed Vista again and am hesitant to try Fedora again... How can I install Fedora alongside Vista properly (as dual boot)?

Or should I stay away, because it is apparently too difficult for me? Is it worthwhile to make a separate /home partition as I read that it is preferred to do a clean install every release? Could I just do that with Gparted and then assign the partition as /home in the Anaconda installer? The downside is that I then need to create a swap and / partition too, right?

View 6 Replies View Related

Fedora Installation :: Dual Boot Vista - Grub In MBR And HD As Ext4?

Nov 6, 2009

Shrinking the Vista partition and format the rest of the HD as ext4 and install Fedora into that partition and put the GRUB in MBR, is this the right way to dual-boot fedora with Vista?

View 4 Replies View Related

Fedora Installation :: No Automatic Dual Boot Setup With Vista

Jan 2, 2010

Usually I have no problems with linux but with fedora it didnt automatically set up the dual boot with vista. I cant remember how to set up grub to boot vista, how to set this up.

View 1 Replies View Related

Fedora Installation :: Setting Up Dual Boot With Windows Vista?

Jun 9, 2011

I have been trying out different Linux distros to dual boot with Windows Vista. First I tried Ubuntu and it worked fine. Then I tried Fedora 15 and it worked fine as well. Then I went back to Ubuntu but now I have decided to stick with Fedora. The first time I installed Fedora it gave me options for choosing default OS and other things, now I can't remember how I did that and can't figure out how to do that agian. How do I do that agian? I want it to automatically boot into Windows Vista. I am installing Fedora on a seperate hard drive.

View 1 Replies View Related

Ubuntu Installation :: Hard Drives And Partitions Work In General?

Apr 14, 2010

I've been through a lot of the posts already, but nothing seems to solve my problem. I have Ubuntu 9.10 and Windows 7 dual installed (Windows was installed first). Everything has been working fine until a few weeks ago when I accidentally left a USB drive plugged in when I restarted my computer from Windows.

Ever since then, whenever I have restarted my computer from Windows grub2 has failed (it does not fail when I restart from Ubuntu). I get a varying message like Grub loading. The symbol ' ' not found. Aborted. Press any key..where the part between the single quotes is usually different each time. When this happens I have to reinstall Grub2 from a live disk, which is becoming a bit of a pain.

I've been reading around, but I don't really have a great understanding yet of how hard drives and partitions work in general, and so I haven't been able to work out what the source of this problem is.

View 2 Replies View Related

Fedora Installation :: Grub Not Working With FC10 / Vista Dual Boot

Jan 25, 2009

I did a fresh install of Fedora Core 10 32bit on my Caompaq Presario AMD 64 laptop which originally only had Vista ultimate 64bit. When I go in to grub and choose windows I get a screen that says:

Windows failed to start...
File: windowssystem32winload.exe
Status: 0xc0000225
Info: The selected entry could not be loaded because the application is missing or corrupt.

View 9 Replies View Related

Hardware :: Dual Boot With Dos Absolute Two Seperate Hard Drives?

Jun 25, 2010

Ok so first off my hardware Asrock 775dual-vsta Master and Slave hard drives on primary IDE Absolute Linux 2.6.33.3 ; Dos 7.1 (yes Dos 7.1 by itself no windows whatsoever) Absolute Linux=sda1 ; Dos=sdb1

Ok so I can't boot into dos from lilo boot menu. It boots fine however if I tell the bios to boot from the second HDD first (DOS). But it's inconvenient to tell the bios every time on power-up to choose the second hard drive as the first boot device. Here is my lilo.conf boot section

# Linux bootable partition config begins
image = /boot/bzImage
initrd = /boot/initrd.gz
root = /dev/sda1

[Code]...

Either way when I boot from the first hard drive (linux hard drive) and lilo pops up, I select dos and hit enter then nothing... It just sits there and ctrl-alt-delete can't reboot my comp as it's frozen.

I don't wanna have to tell the bios to select my dos hard drive as my primary boot device everytime I wanna boot dos. I wan't my linux hard drive to be my primary boot device and have my dos hard drive selectable from the lilo boot menu. Why can't I do that? What am I doing wrong? I thought this was easier than dual booting from a single hard drive?

View 5 Replies View Related

General :: Dual Boot Windows 7 And Ubuntu Using 2 Different Hard Drives?

Nov 23, 2010

I just started working with Linux over the weekend. I do have a working dual booting system but it's not configured exactly how I want it to be. Currently Windows 7 Ultimate and Ubuntu are on the same hard drive but different partitions. The Windows boot screen comes up and I can select Windows or Ubuntu fine. Grub comes up when I select Ubuntu and I can successfully select any choice in the menu and it will run properly.

Everything works great now so you may wonder why I even want to keep tinkering, well, it's not working how I want it to. This is what I want it to do. I want Windows 7 on disk 0 and Ubuntu on disk 1. I want each OS to have it's own hard drive. I want Grub to be the only boot loader that comes up with the option to select Ubuntu or Windows. I want to skip the window's OS selection screen all together. I can modify Grub, I've already done some of that on my work computer.

I've been installing from windows. Should I use a CD instead? Would that accomplish my goals without doing anything special?

View 3 Replies View Related

Slackware :: Dual-boot With Separate Hard Drives And Lilo?

Dec 16, 2010

After I complete a big project I'm working on I'm going to be wiping and re-doing my desktop machine, probably in the next day or three. I'm going to be setting up a dual-boot; my first in about three years. I'll be using separate hard disks for this, and installing Slackware second on the bigger of the two drives. When I've done this in the past I've used Grub; Is there anything I need to know or pitfalls I need to avoid doing it with Lilo?

View 5 Replies View Related

Fedora Installation :: Dual Boot With Vista - Remove One Of Them To Save Disk Space

Jan 15, 2009

I installed the live CD version of fedora (dual boot with vista) on my laptop. After I connected to the internet the updates downloaded and all went well. however when i restarted at the boot screen I found two instances of fedora such as

Fedora(2.6.27.9-159.fc10.i686)
Fedora(2.6.27.5-117.fc10.i686)
Other

The "other" is vista. I am wondering if this is OK or whether I have two fedora. If so i would like to remove one of them to save disk space.

View 5 Replies View Related

OpenSUSE Install :: Dual Boot Windows 7 / 11.3 Using Separate Hard-drives For Each OS?

Oct 7, 2010

We were trying to install w7 on a reserved partition. W7 did not like the partition (whatever we tried).

Since we had 3 hard-drives, on the allocated drive we deleted all partitions and set the partition table type new to MSDOS (yast etc.....).

W7 installed fine. We did not time it, but it appeared that 11.3 installs faster plus considering 11.3 installs quite a number of applications.

There are plenty of postings re integrating W7 to the Grub-menu.

This system went through several Suse updates, hardware upgrades, basically was all over the place.... we did a "new" install of 11.3 allocating its own hard-drive.

Install......fine, and Grub entered W7 to the menu. Worked ! Mounted the windows partition to /home/yourusername/windows

So, if you really (?) need W7 and have a spare hard-drive, this maybe is a clean solution.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved