How does Fedora recognise USB modem ? I have a USB Modem that works on Windows but It does not work on Fedora 10 linux. It is for Reliance Netconnect (India) and USB modem is HUAWEI EC 1260
I tried editing the wvdial.conf in /etc/wvdial.conf as
But it does not seem to work
I even tried changing the Modem = /dev/ttyUSB0 to Modem = /dev/ttyUSB2 but I get the message as --> Cannot open /dev/ttyUSB0: No such file or directory
find and install modem driver for the Alcatel X200 USB modem?
I've been all over the internet trying to locate Linux drivers but no success. Alcatel's website says is not supported, only in Windows. I'm sure there's gotta be a way to use the X200 in Linux.
Steps for using scan Modem to Identfy dial up modem?
View 1 Replies View RelatedI have Ubuntu on my laptop and use a Zoom USB modem. I can only use the modem when running Windows and really hate to do that. Does anyone know where I might find a driver to run my modem on Ubuntu?
View 1 Replies View RelatedI have a brand-x usb-modem and much to my suprise it had a .deb package to install the driver.The only problem is it fails during the "make" and I dont know enough about C to be able to fix the error. I'm not even sure what information is needed to help me with this chore.
View 4 Replies View RelatedI've a Popular P300U Egprs Modem. I can't install this on my UBUNTU 9.04 Desktop Version. My modem company doesn't give any driver support on ubuntu.In Windows XP its install USB to UART Bridge Controllers on Com Port 3. Its Silicon Lab driver. It also install Virtual Serial Port.In terminal window if i command "lsusb" then it show a device connected which name is "Cygnal". It also shows its vendor & product id.
View 4 Replies View RelatedI have a Compaq Presario 2100 laptop running Ubuntu 8.04LTS. It has a Conexant HSF modem/chipset, for which I bought the Linuxant HSF modem driver- 56K max.It is installed and it "functions",ie: it will connect to my ISP and I can start to browse (Firefox), but it will inevitably disconnect itself. At this point it is always down to "turtle speed of 4800bps".I have consulted with Linuxant Support and they suggested different modem init. strings - mainly different modulations - V34,V90,V92 w/variations. Nothing has made any signif. diff. They won't offer any further help.My question is: Could it be that Ubuntu 8.04 specifically, or Ubuntu of any version, is the source of the problem??
I have Knoppix 5.1.1 Live CD which loads up fine, and I was hoping to try the HSF driver with it, but I need to get Kernel Source pkg. and that will take 2+ hrs. to download by dialup , so haven't tried it yet.
I have recently installed Ubuntu and I am very new to the Linux platform. I am trying to install the USB modem but cannot find a driver and don't understand all the tech jargon.
View 1 Replies View RelatedI need to find a driver for a Sprint 3G/4G modem. I am running 9.04.
Sprint lists this as a U300 but the actual part is a Franklin Wireless FW300DOWMX.
lsusb shows this as ID 16d8:6002 CMOTECH Co., Ltd. and ID 0409:005a NEC Corp. HighSpeed Hub
so my box can see the part.
If I can get just the 3G working that would help a lot. I would be happy to do beta, even alpha, testing.
a link to a website where I can get PCtel modem driver for kernel 2.6.28
View 1 Replies View Relatedi follow this guide:https://help.ubuntu.com/community/Di...wto/Intel536EP
then i find my modem:
$ lspci | grep 536EP
Quote:
[code]....
setup and configure a Huawei E1750 modem on mandriva!
View 5 Replies View Relatedi have some basic knowledge about device drivers.can any one tell how to write drivers for virtual modem, Actually my project is to implement communication between the two PCs by using two virtual modems. so for that i need to write the code for the virtual modem which it should understand all the AT commands exactly as physical modem and it should send/receive call and SMS.
View 1 Replies View RelatedI just got Clear mobile Wimax. It uses a Motorola USB stick modem that comes with a Windows driver. I didn't see a Linux driver and was wondering if I could expect to see one for openSuse moblin for netbooks?
View 4 Replies View RelatedI want to get an adsl 1 internal pci modem card for my home server. Netcomm's NB100 seems to be the most readily available. Does anyone know if there are ubuntu drivers for it? If not can you suggest a card that does and is easy to get a hold of?
View 2 Replies View RelatedI recently bought the Edimax 7781Un wireless modem specifically because it works with Linux. The OS does recognise the device and tries to connect to the router, however it connects and has the two semi-circles going round then it eventually disconnects. I thought it was my wireless device with little signal strength therefore I bought this one. However this one connected once for 20 seconds, 89% strength and disconnects. I booted up win7 and it works fine, so I have put it down to the driver or the OS.
Trying to compile the driver, I am up to the make step after following instruction here. I type make, it does a few things and errors a fair few things, the last line ending in [make] *** [LINUX] Error 2
Another possibility (I think) for this connection problem could be my AMP installation, however I have neither apache, php or mysql running and I still have the problem.I read somewhere that make requires more files, is this true? And if it is, where can I get it without an internet connection on my linuxbox? (I am currently using my brothers w7 computer).
I'm a Linux noob an I am really desperate for some top, top, top assistance. Been battling a while now with my iBurst USB modem driver and hope there is someone out there that can help? I have been through umpteen forums and threads and tried literally everything I read, but to no avail. I also realize there aren't many Ubuntu users that use the iBurst modem, but I am appealing to the few out there that do.
I have installed the open source ibriver-2.6.31 for my iBurst USB modem. Initially all went well with fast connection etc., connection everytime I boot, until... I started updates of 10.04 LTS, that is when I became aware, from the forums, that a re-install of the driver is required after every package update due to no "package management" in the iBdriver. what a pain in the proverbial to say the least!
Anyways.. now I am the stage where the driver is always installed, but...all of a sudden, I need to run pppoeconf and set up the driver after each boot to get connected!!!! If I can't find a solution it will force me back to Windoze7 which I dread to do! Can a script be written to pppoeconf (rp-pppoeconf.iso is loaded I think) automatically during boot perhaps?
So any top Linux hacker or "notsonoobasIam" user out there with a iBurst modem and similar pains & mis-fortunate experience please share your ideas and thoughts to correct this problem permanently for me please? (I should maybe mention that the other day I performed the "Grub2 Profile" exercise to try and speed up the boot time, this does not perhaps have something to do with the fact that I need to reconfigure in pppoeconf after every boot does it? I doubt it)
Using Mint 9 and Ultimate and Fedora, where can I find a driver for a "3" external broadband modem? Mine is a USB device, 3G. I use a Pentium 4 dual core by ASUS. Dual boots.
View 1 Replies View RelatedWhat include support a driver for USB modem Huawei E219 (HSDPA/UMTS) and Huawei EC226 (3G/EVDO)?
View 1 Replies View Relatedwith installing Modem Huawei E170. my modem can not connected and suddenly remove from my PC. i am using Ubuntu LTS 10.04.
View 1 Replies View Relatedi'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
I have this USB modem P300U(SIM600 chip based) which works fine under wind@ws because it has it's own driver, but the clever seller told me that it worked under Linux as well. It was with Redhat 8 but I couldn't get redhat 8 to download. And until now absolutely false.
I have Debian with Kernel 2.6.32-5-686 I just want to send sms through this modem. It's not recognized as modem I'm frustrated because it's not useful for me if it doesn't work on Linux I looked for info but I can't make it work. What I get in my debian is:
lsusb: Bus 002 Device 003: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x Composite Device
dmesg: 9857.011649] usb 2-1: new full speed USB device using uhci_hcd and address 3
[ 9857.818942] usb 2-1: New USB device found, idVendor=10c4, idProduct=ea60
[ 9857.818989] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[code]....
This is my first attempt with Yum and Fedora for that matter. I need to load a print driver and network driver for an MX860 printer. I downloaded the drivers and they are in the download folder. When I try to install I get what is below. How do I resolve? Do I need to identify where the driver is? If so, how?
[compaq@compaq ~]$ su -c'yum install cnijfilter-mx860series-3.10-1-i386-rpm.tar.gz'
Password:
Loaded plugins: refresh-packagekit
updates/metalink | 15 kB 00:00
Setting up Install Process
No package cnijfilter-mx860series-3.10-1-i386-rpm.tar.gz available.
Nothing to do
[compaq@compaq ~]$
I have a Centos 5.4 server running kernel 2.6.18-164.11.1.el5PAE. It has an internal modem, and I need to be able to issue AT commands from a script to the modem. I need to simply dial a number and hang up. The relevant piece of my script is:
[Code]...
With an external modem, this works no problem. With an INTERNAL modem, the call never goes out. I fired up minicom to make sure the modem was working correctly, and if I issue those AT commands from within minicom, everything works great.
While minicom was running, I noticed a peculiar fact: WHILE minicom is running, the script works from the command line, and I can see all the AT commands and OK's in minicom, (minicom acts as a monitor). When I exit minicom, the script stops working. It appears minicom is creating a bridge between the com port and the modem itself. So, what is minicom doing that I'm unaware of?
The server's sole function is to run asterisk as a voicemail server (avaya wanted well into 6 figure territory to implement this....). This script is to dial an avaya FAC to turn the voicemail message lights on and off on the end users' phones.
I wish to install a modem to permit dial in access (ie to be able to access the system remotely). The modem I have is an external modem on the 9 pin serial port. What configuration would I need to perform on the server?
View 1 Replies View RelatedI have installed the KDE spin and am liking it so far. Except for the fact that I cannot get onto the internet. I rely on this ZTE USB wireless modem for internet and that just would not get recognized in Fedora. Plus, my Windows installation is down and I would love to keep it that way if at all possible.
I have followed a few instructions on this particular problem. I have modified the menu.lst file to account for the usbmodserial and product. The usb_modeswitch program has also been installed and the usb_modeswitch.conf file has been edited with the values I got from the 'lsusb' command's output.
But the curious thing is that when I actually execute the usb_modeswitch command, I get a message saying that there are no drivers for the ZTE device. Which means that I cannot go onto the wvdialconf part of it at all. Basically at this point I dont have a modem, according to Fedora. But it does get recognized as a ZTE device. That tells me that there is something right about what I have done so far and may only need to do a few tweaks here and there.
PS - I am based out of India and this is a Tata Indicom Photon (NOT Photon Plus) connection for which I have a USB device which acts as a modem.
I'm about ready to give up! The modem is a USR5610C it has an rpm file. I guess I'll also need to know if I'm starting it correctly, by restarting the machine.
View 1 Replies View Relatedi have modem HSPDA ( prolink PHS 100) but i don't know how to use in linux. I already to set password,user name and etc. in wvdial. but it still can't to connect to internet.
View 2 Replies View RelatedWhen I use Ubuntu, my DSL modem correctly gets the hostname I call my computer "mertensia", but I'm having issues with Fedora. Yet, when I look at the name assigned by the modem (using URL... in a web browser),I need the PC Name to be mertensia, because otherwise it will complicate how I ssh immensely.
View 4 Replies View RelatedHow can I get Huawei 3g modem E153 connects on F14 ? I've tried settings in network manager applet to set it with no success.
View 3 Replies View Related