Fedora :: Modem Reconnection In FC10
Feb 4, 2010I'm about ready to give up! The modem is a USR5610C it has an rpm file. I guess I'll also need to know if I'm starting it correctly, by restarting the machine.
View 1 Replies
ADVERTISEMENT
Fedora Networking :: Configure ADSL Using Use Fc10 - Ethernet Cable <Asus Am608 ADSL Modem>
Aug 6, 2009I want to configure my ADSL but I don't know what should I do. Can you explain me How can I configure it?(I use fc10, ethernet cable <Asus Am608 ADSL modem)
View 9 Replies View RelatedOpenSUSE :: Network Reconnection After Disconnect Doesn't Work?
Apr 2, 2010The main thing preventing me from going Linux although I have it installed in a multi-boot is the probelm I have with Reconnecting the Network (eth0)
If I reboot everything is fine and I am automatically connected to internet via my Ethernet_NAT_router/Homeplug_PowerLine/Cable_Router (using DHCP)
But if I manually disconnect the Network using the tray icon, or through the terminal, when I reconnect the Network Manager says I am reconnected but actually I am not connected to the internet. I can load my Cable Routers configuration page but pages beyond that in the outside world are accessible no longer...
To regain access I have to reboot.
The reason this is important for me is that I reckon if I could get this sorted then if I put the laptop to sleep it will will wake up and reconnect.
As it is using Linux sleep function is unworkable unless I don't mind losing internet.
I am determined to get this sorted eventually as I feel sure there must be a solution. My laptop isn't new but is a good workhorse.
Dell Inspiron 4100 / OpenSUSE Linux 11.2 Gnome
Networking :: Keep Wired Connection Working While Reconnection Wireless
Nov 9, 2010I'm using Archlinux with NetworkManager to connect to the internet. When I'm in my room, I've an ethernet cable and still receive the wireless signal.Sometimes (like when we have a power cut, somebody is rebooting the router or simply something wrong with the provider), I'm disconnected during a few seconds, NetworkManager ask me again the password of the wireless (even if it remembers it), and then I'm ok.But when I'm not in front of my computer, while I haven't push the button "ok", it doesn't connect, even with the wired connection.That's not very normal in my opinion as there is supposed to have two different and independent connection. No ?
I intent to install an ssh server on my computer but if I cannot access it every time there is a problem that won't be very useful.
Fedora :: Scan Modem To Identfy Dial Up Modem?
Feb 3, 2010Steps for using scan Modem to Identfy dial up modem?
View 1 Replies View RelatedFedora Installation :: Update From FC10 To Fedora 12 From The Command Line?
Dec 10, 2009How do I update from FC10 to Fedora 12 from the command line.
View 2 Replies View RelatedFedora Installation :: Firefox And FC10 Won't Run?
Jan 6, 2009When trying to launch firefox after upgrading to FC10, I get:Couldn't load XPCOM
View 4 Replies View RelatedFedora Servers :: How To Upgrade From Fc4 To Fc10
Mar 26, 2009just as the title states i need to upgrade my os from fc4 to fc10 first let me say i have no physical access to the box. all i have is root ssh access to it. So i need to know the best way of upgrading that will be safe. before i do the upgrade the server will be backed up so i will not loose any files. if the upgrade fails the data center will reload the os with what i need on it. but i would rather not have to format.
View 6 Replies View RelatedFedora :: Fc10 Leftovers After The Upgrade?
Jun 13, 2009After upgrading to F11 I have had a few problems with some applications most like miro I was able to fix by using yum remove and then reinstalling. It appears that after updating some applications have stayed with the fc10 versions despite fc11 versions being available.
yum list | grep fc10 | grep installed
anthy.i386 9100h-4.fc10 installed
compat-db45.i386 4.5.20-5.fc10 installed
cronie.i386 1.2-8.fc10 installed
[code]...
Fedora Installation :: Fc10 To 11 And Now STUCK?
Aug 6, 2009I did the yum preupgrade install, all went well, did preupgrade -gui ; did everything fine, then i got the REBOOT now to start updating, clicked and i have just
View 5 Replies View RelatedFedora :: After Upd FC10 To FC11 Yum Not Working?
Oct 12, 2009I recently update FC10 to FC11 and Yum has stopped working. Also, "Add/Remove Software" has no packages listed. And, I have no Software repositories listed. When I try to run Yum I get the following:
There was a problem importing one of the Python modules required to run yum. The error leading to this problem was:
[Code]...
Fedora :: Install Mplayer On Fc10?
Feb 4, 2010how do install mplayer on fc10?
View 7 Replies View RelatedFedora Servers :: Tar Backup Of Webserver On FC10?
Jan 27, 2009I want to backup my apache website using tar. I want to make sure all the permissions and such stay the same so that if I restore a website, it's ready to go exactly as it had been.I am using the following command and would like to know if there is anything else I should neeed to do?
tar --xattrs cvzf backup.tgz /path-to-webserver-files
Now my other question is since tar doesn't store absolute paths, when I run the restore I have to be in the root directory? In another words if I run the command in a user directory will tar do something retarded like encode the paths as ../path-to-webserver or will it just be path-to-webserver so that when I run the restore from the / folder it will automatically go into the right place?
Fedora Servers :: Config For Routing New To FC10?
Feb 4, 2009So my server running FC4 died last night and I decided to go ahead with the long-awaited upgrade to FC10 while I was rebuilding my server. I use my server for a number of things including, but not limited to: router, firewall, web server, mail server... I have a typical configuration process that I have followed since before fedora, and it has worked well for me up through FC4, but my usual config process doesn't work on FC10.
First of all, I don't want SELinux running, I didn't see an option to not install it during the FC10 setup, so how to I properly disable or uninstall it afterwards? Second, I was unable to even configure the server to route traffic from my internal network to the web, here's the process I usually go through for this:
[Code]...
I don't have a static IP from my ISP, so I'm not quite sure how to add the default route. I think I need to do something like "route add default gw xxx.xxx.xxx.xxx eth1" where eth1 is my external NIC, correct?
What else do I need to do to route traffic? I noticed that I wasn't even able to ping my server from the internal network even though they are on the same subnet, my server's internal NIC has an address of 192.168.7.1 and my computer on the network has an address of 192.168.7.2. If I can get this going to I have internet access again at the very least, I can move forward with the web server, email, etc.
Fedora Networking :: Connection With FC10 - Don't Seem To Get It Work
Feb 6, 2009I'm currently running FC9 and I have no problem with my network connection. Now I just installed FC10 on another partition too try it out, but I don't seem to get it work. I disabled the NetworkManager (like in FC9) and enabled the Network. I'm using static IP, when in go in Network Configuration/Ethernet Device/General, the subnet mask is always taking the address of the Default gateway address when I press OK.
my subnet mask is 255.255.255.0, and my gateway is 192.168.1.1, but after I press ok they both go back to 192.168.1.1
Fedora Networking :: Network Between Two FC10 Laptops
Mar 21, 2009I and my friend use FC10 on our laptops. We want to share our data by creating a wired network between our machines because a wireless router is something what our pockets can't afford. What should I do for it? What type of wires and stuffs do I need? I Googled for some link for doing so in FC10 but couldn't find.
View 6 Replies View RelatedFedora Installation :: Fc10 Booting Became Slow
Mar 30, 2009I was forced to reinstall fc10 a couple of days back and from them the bootingup is really slow(takes more then 1 minute to show login screen). before the reinstall, it was quite fast. i dont know what went wrong.
[Code]....
Fedora Servers :: FC10 Hangs On SMB Service?
Apr 16, 2009I recently setup a file sharing server with FC10 running Samba...
I got it running perfectly and it ran great for a few weeks. I was working on the machine today and tried to reboot it and noticed that it was stuck on FC10's new boot screen. I pressed the esc key and saw that the boot process was stuck on the smb service...
I don't get any errors and the machine doesn't freeze up or anything, it just hangs on the smb service and won't continue with the boot...
Is there anyway that I can get the system to skip the smb service so that I can get into the system? I don't know what's changed or what's causing this sudden hang in the system at boot.
I tried the ubuntu live CD to attempt to go in and edit the /etc/rc5.d scripts to try and skip the smb service start but I am not sure where to look for it...
Fedora Installation :: Install Systemc V2.1.0 On Fc10 With Gcc 4.3.2?
Apr 16, 2009I am trying to install systemc v2.1.0 on fc10 with gcc 4.3.2. I have gone through the previous posts for systemc installation with gcc 4.3.2 and have installed the patch ,
added the following headers in systemc-2.2.0/src/sysc/utils/sc_utils_ids.cpp
#include "string.h"
#include "cstdlib"
but it did not work out.This is what I get The complete installation process is as follows
$tar xvzf systemc-2.1.v1.tgz
$cd systemc-2.1.v1
$wget http://www.kix.in/misc/patch_systemc-2.1.v1-gcc4-osx // patch from post
$patch -p0<patch_systemc-2.1.v1-gcc4-osx
[code]....
Fedora Installation :: Cant Execute Firefox-3.0.10 In FC10?
May 3, 2009After to download the firefox-3.0.10.tar.bz2I have the next problem
Code:
firefox-3.0.10]$ ./firefox
./run-mozilla.sh: ./firefox-bin: /lib/ld-linux.so.2: bad ELF interpreter:
[code]....
Fedora Installation :: Can't Install IE24linux On FC10
May 27, 2009installing IE on FC10 as I need it to access company email I installed wine first as #yum install wine* then I installed cabextract as #yum install cabextract after that I downloaded IEs4linux and run the script ad $./ies4linux I got the following message in the terminal "IEs4Linux 2 is developed to be used with recent Wine versions (0.9.x). It seems that you are using an old version. It's recommended that you update your wine to the latest version (Go to: [URL])" and in the install window script couldn't download flash and it seems to be hang every thing is stopped and I didn't get any message in terminal or in installation window.
View 1 Replies View RelatedFedora Installation :: FC11 Over With The Same Packages As In FC10
Jun 9, 2009I'd like to try a clean install instead of an upgrade from FC10 to FC11. What is a good way of getting the list of all packages that were installed through yum, and how do I feed that list to yum on a newly installed FC11?
View 7 Replies View RelatedFedora Servers :: Restore RPM Packages (fc10)?
Sep 10, 2009I made a big mistake on my FC10 machine-while trying to resolve a way to install vlc- I wrote the following command:"yum erase rpm lib".After restarting the machine fedora did not load... (might be funny- I laughed...).Do you know of a way top recover from this state? (I have the liveCD disk),
View 2 Replies View RelatedFedora :: Eth0 Not Coming Up On Boot, FC10
Oct 17, 2009Sometimes (but not every time), when booting my Dell Inspiron 530, eth0 will not come up right away. I can boot and log in to Gnome, and the NetworkManager applet shows that the ethernet cable is unplugged. After sitting for 5-10 minutes, it will link up and everything works. If I unplug the network cable and plug it back in, it comes right up. But once it's linked, it works fine and never disconnects after that. I've tried switching to a different port on my switch and a new ethernet cable. So I suspect it's some sort of weird kernel problem. I checked /var/log/messages and the only thing that looks weird is:
Oct 17 07:51:49 obi-wan kernel: e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
Oct 17 07:51:49 obi-wan kernel: e1000e: Copyright (c) 1999-2008 Intel Corporation.
Oct 17 07:51:49 obi-wan kernel: e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level,
[Code].....
But I have a second Inspiron 530 that has the same entry and it works fine. Has anybody seen a problem like this? I've looked around and so far can't find out the exact issue. I've upgraded NetworkManager to the latest version for FC10
Fedora Networking :: DNS Broken After Upgrade To FC10?
Oct 20, 2009I recently upgraded my x86_64 system from FC8-FC10 using Pre-Upgrade, and here I got some help fixing all the package conflicts that resulted. Following the first reboot after this massive package update, it appears DNS doesn't work in some apps.
I could ping www.yahoo.com, and nslookup www.yahoo.com resolved the name, but firefox and links couldn't. Typing the ip addr that nslookup gives for www.yahoo.com works fine in both firefox and links. Something's obviously wrong with DNS.
I found a workaround for Firefox which is to browse to about:config and set network.dns.disableipv6 = true. Firefox started resolving names after that.
But then I noticed yum is DNS incapable as well. I don't know how to fix it. Here's what I get:
Code:
[~]$ sudo yum update
Loaded plugins: allowdowngrade, refresh-packagekit
http://linuxdownload.adobe.com/linux/i386/repodata/repomd.xml: [Errno 4] IOError: <urlopen error (-2, 'Name or service not known')>
Trying other mirror.
[Code]....
Does anyone have any additional info on workarounds or fixes for this DNS problem?
The machine in question has a static ip addr, and I have static nameserver addrs in /etc/resolv.conf, corresponding to the static settings provided by my isp.
Fedora X86/64bit :: 32 Bit Compatibility On FC10 - C++ Libs
Oct 22, 2009I assumed this had to be a FAQ, but after hours of searching, how to do this on FC11, but that didn't work with the yum on FC10. I don't need a huge list, but at least the basics (ld-linux.so, and I imagine the C++ compatibility libs).
View 2 Replies View RelatedFedora :: Get Broadcom 4312 Working Again Since FC10?
Nov 23, 2009How do you enable repos? Namely RPMFusion set? I have 2 repo's that are currently in stalled:
[root@dv5-1235 Joe]# yum repolist
Loaded plugins: presto, refresh-packagekit
repo id repo name status
fedora Fedora 12 - x86_64 enabled: 19,122
updates Fedora 12 - x86_64 - Updates enabled: 755
repolist: 19,877
I'm trying to get my Broadcom 4312 working again since FC10. I noticed that RPMFusion isn't listed. This would answer why I can not install Broadcom -wl.
Fedora :: Linksys:WL-N PCI With Dual-B.(WMP600N) Under FC10?
Dec 4, 2009How to get the Linksys: Wireless-N PCI Adapter with Dual-Band (WMP600N) working under FC10 with WEP encryption and linking up to a 54Mb/s Network. Hardware : D945GCLF2 with Intel atom330, 2G memory. As I got to this in a roundabout way, I would recommend that you follow the following steps and see if somewhere along the line your wireless starts working.
1: Get the latest driver from Ralink: [URL] In my case 2009_0918_RT2860_Linux_STA_v2.2.0.0.tar.bz2 (the line starting with RT2860PCI) Unpack, read the README_STA file and follow the instructions. Do: make && make install After this I could only get a wireless connection by doing:
[Code]....
Red Hat / Fedora :: Stuck At Log In Screen FC10 Gnome
Feb 18, 2010All in a sudden I can no longer login to my desktop (FC10 Gnome). After I typed in my passwd the desktop was trying to spawn for a few seconds (a black screen with curser and blue spashes) and it goes right back to the Login screen again. I tried to boot with 'single' mode and changed my passwd from root but to no avail. Not sure what I did wrong during my last session: I was fooling around with the NFS setup for my new Eval Board.
View 2 Replies View RelatedRed Hat / Fedora :: FC10 - How To Extend Logical Volume
Mar 6, 2011I have a system with a single disk that is partitioned as below:
1) hda
hda1 - boot partition - 0.3GB
hda2 - System - 15.7GB
There are 2 volumes on single group. The boot partion is a physical volume and the system is a logical volume. The disk has more room up to 40GB. How can I extend the logical volume. Tried system-config-lvm, but it does not gives the option.
