I've a Popular P300U Egprs Modem. I can't install this on my UBUNTU 9.04 Desktop Version. My modem company doesn't give any driver support on ubuntu.In Windows XP its install USB to UART Bridge Controllers on Com Port 3. Its Silicon Lab driver. It also install Virtual Serial Port.In terminal window if i command "lsusb" then it show a device connected which name is "Cygnal". It also shows its vendor & product id.
View 4 Repliesfind and install modem driver for the Alcatel X200 USB modem?
I've been all over the internet trying to locate Linux drivers but no success. Alcatel's website says is not supported, only in Windows. I'm sure there's gotta be a way to use the X200 in Linux.
How does Fedora recognise USB modem ? I have a USB Modem that works on Windows but It does not work on Fedora 10 linux. It is for Reliance Netconnect (India) and USB modem is HUAWEI EC 1260
I tried editing the wvdial.conf in /etc/wvdial.conf as
But it does not seem to work
I even tried changing the Modem = /dev/ttyUSB0 to Modem = /dev/ttyUSB2 but I get the message as --> Cannot open /dev/ttyUSB0: No such file or directory
I have Ubuntu on my laptop and use a Zoom USB modem. I can only use the modem when running Windows and really hate to do that. Does anyone know where I might find a driver to run my modem on Ubuntu?
View 1 Replies View RelatedI have a brand-x usb-modem and much to my suprise it had a .deb package to install the driver.The only problem is it fails during the "make" and I dont know enough about C to be able to fix the error. I'm not even sure what information is needed to help me with this chore.
View 4 Replies View RelatedI have a Compaq Presario 2100 laptop running Ubuntu 8.04LTS. It has a Conexant HSF modem/chipset, for which I bought the Linuxant HSF modem driver- 56K max.It is installed and it "functions",ie: it will connect to my ISP and I can start to browse (Firefox), but it will inevitably disconnect itself. At this point it is always down to "turtle speed of 4800bps".I have consulted with Linuxant Support and they suggested different modem init. strings - mainly different modulations - V34,V90,V92 w/variations. Nothing has made any signif. diff. They won't offer any further help.My question is: Could it be that Ubuntu 8.04 specifically, or Ubuntu of any version, is the source of the problem??
I have Knoppix 5.1.1 Live CD which loads up fine, and I was hoping to try the HSF driver with it, but I need to get Kernel Source pkg. and that will take 2+ hrs. to download by dialup , so haven't tried it yet.
I have recently installed Ubuntu and I am very new to the Linux platform. I am trying to install the USB modem but cannot find a driver and don't understand all the tech jargon.
View 1 Replies View RelatedI need to find a driver for a Sprint 3G/4G modem. I am running 9.04.
Sprint lists this as a U300 but the actual part is a Franklin Wireless FW300DOWMX.
lsusb shows this as ID 16d8:6002 CMOTECH Co., Ltd. and ID 0409:005a NEC Corp. HighSpeed Hub
so my box can see the part.
If I can get just the 3G working that would help a lot. I would be happy to do beta, even alpha, testing.
a link to a website where I can get PCtel modem driver for kernel 2.6.28
View 1 Replies View Relatedi follow this guide:https://help.ubuntu.com/community/Di...wto/Intel536EP
then i find my modem:
$ lspci | grep 536EP
Quote:
[code]....
setup and configure a Huawei E1750 modem on mandriva!
View 5 Replies View Relatedi have some basic knowledge about device drivers.can any one tell how to write drivers for virtual modem, Actually my project is to implement communication between the two PCs by using two virtual modems. so for that i need to write the code for the virtual modem which it should understand all the AT commands exactly as physical modem and it should send/receive call and SMS.
View 1 Replies View RelatedI just got Clear mobile Wimax. It uses a Motorola USB stick modem that comes with a Windows driver. I didn't see a Linux driver and was wondering if I could expect to see one for openSuse moblin for netbooks?
View 4 Replies View RelatedI want to get an adsl 1 internal pci modem card for my home server. Netcomm's NB100 seems to be the most readily available. Does anyone know if there are ubuntu drivers for it? If not can you suggest a card that does and is easy to get a hold of?
View 2 Replies View RelatedI recently bought the Edimax 7781Un wireless modem specifically because it works with Linux. The OS does recognise the device and tries to connect to the router, however it connects and has the two semi-circles going round then it eventually disconnects. I thought it was my wireless device with little signal strength therefore I bought this one. However this one connected once for 20 seconds, 89% strength and disconnects. I booted up win7 and it works fine, so I have put it down to the driver or the OS.
Trying to compile the driver, I am up to the make step after following instruction here. I type make, it does a few things and errors a fair few things, the last line ending in [make] *** [LINUX] Error 2
Another possibility (I think) for this connection problem could be my AMP installation, however I have neither apache, php or mysql running and I still have the problem.I read somewhere that make requires more files, is this true? And if it is, where can I get it without an internet connection on my linuxbox? (I am currently using my brothers w7 computer).
I'm a Linux noob an I am really desperate for some top, top, top assistance. Been battling a while now with my iBurst USB modem driver and hope there is someone out there that can help? I have been through umpteen forums and threads and tried literally everything I read, but to no avail. I also realize there aren't many Ubuntu users that use the iBurst modem, but I am appealing to the few out there that do.
I have installed the open source ibriver-2.6.31 for my iBurst USB modem. Initially all went well with fast connection etc., connection everytime I boot, until... I started updates of 10.04 LTS, that is when I became aware, from the forums, that a re-install of the driver is required after every package update due to no "package management" in the iBdriver. what a pain in the proverbial to say the least!
Anyways.. now I am the stage where the driver is always installed, but...all of a sudden, I need to run pppoeconf and set up the driver after each boot to get connected!!!! If I can't find a solution it will force me back to Windoze7 which I dread to do! Can a script be written to pppoeconf (rp-pppoeconf.iso is loaded I think) automatically during boot perhaps?
So any top Linux hacker or "notsonoobasIam" user out there with a iBurst modem and similar pains & mis-fortunate experience please share your ideas and thoughts to correct this problem permanently for me please? (I should maybe mention that the other day I performed the "Grub2 Profile" exercise to try and speed up the boot time, this does not perhaps have something to do with the fact that I need to reconfigure in pppoeconf after every boot does it? I doubt it)
Using Mint 9 and Ultimate and Fedora, where can I find a driver for a "3" external broadband modem? Mine is a USB device, 3G. I use a Pentium 4 dual core by ASUS. Dual boots.
View 1 Replies View RelatedWhat include support a driver for USB modem Huawei E219 (HSDPA/UMTS) and Huawei EC226 (3G/EVDO)?
View 1 Replies View Relatedwith installing Modem Huawei E170. my modem can not connected and suddenly remove from my PC. i am using Ubuntu LTS 10.04.
View 1 Replies View Relatedi'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
Steps for using scan Modem to Identfy dial up modem?
View 1 Replies View RelatedI have this USB modem P300U(SIM600 chip based) which works fine under wind@ws because it has it's own driver, but the clever seller told me that it worked under Linux as well. It was with Redhat 8 but I couldn't get redhat 8 to download. And until now absolutely false.
I have Debian with Kernel 2.6.32-5-686 I just want to send sms through this modem. It's not recognized as modem I'm frustrated because it's not useful for me if it doesn't work on Linux I looked for info but I can't make it work. What I get in my debian is:
lsusb: Bus 002 Device 003: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x Composite Device
dmesg: 9857.011649] usb 2-1: new full speed USB device using uhci_hcd and address 3
[ 9857.818942] usb 2-1: New USB device found, idVendor=10c4, idProduct=ea60
[ 9857.818989] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[code]....
I have a Centos 5.4 server running kernel 2.6.18-164.11.1.el5PAE. It has an internal modem, and I need to be able to issue AT commands from a script to the modem. I need to simply dial a number and hang up. The relevant piece of my script is:
[Code]...
With an external modem, this works no problem. With an INTERNAL modem, the call never goes out. I fired up minicom to make sure the modem was working correctly, and if I issue those AT commands from within minicom, everything works great.
While minicom was running, I noticed a peculiar fact: WHILE minicom is running, the script works from the command line, and I can see all the AT commands and OK's in minicom, (minicom acts as a monitor). When I exit minicom, the script stops working. It appears minicom is creating a bridge between the com port and the modem itself. So, what is minicom doing that I'm unaware of?
The server's sole function is to run asterisk as a voicemail server (avaya wanted well into 6 figure territory to implement this....). This script is to dial an avaya FAC to turn the voicemail message lights on and off on the end users' phones.
am using fedora 13 and would like to use my modem to access internet, install this modem The modem is a Huawei model E160
View 1 Replies View RelatedI am new to linux (Ubuntu 8.10). I don't know anything about sudo commands. At the moment I am using windows to connect to the internet because I con't get my vodafone K3765 USB 3G modem instal om Ubuntu. There is only .exe installation files on the stick. Every thing I try I first have to download it to a disk, restart my pc in Ubuntu and then try it if it dus not work,I have to restart my pc in windows connect to the internet and ask again. I love Ubuntu but I need internet.
View 3 Replies View RelatedI have just in stalled fedora 10 on my system and need help in connenting my wireless and lan ports as they arent working. i use an compaq c700 series. any tweaks available? cos i can only acesss the internet via a usb modem.
View 6 Replies View RelatedI want to install conexant modem in fedora 11 I have installed modem with this guidance [url] But I have a problem When I want to run hsfconfig .This problem is Building modules for kernel 2.6.29.4-167.fc11.i686.PAE, using source directory /lib/modules/2.6.29.4-167.fc11.i686.PAE/build. Please wait... done. Warning: no device detected by hsf driver - HDA modems may require reboot Note: HDA support not compiled in the driver Note: kernel module snd-via82xx-modem overridden by hsfmc97via Note: kernel module snd-intel8x0m overridden by hsfmc97ich hsfmc97sis Note: kernel module snd-atiixp-modem overridden by hsfmc97ati. My modem is conexant hsf modem and I installed in fedora 9 and 10 without problem.
View 10 Replies View RelatedI use an analog modem and wifi to access the internet. I am using Ubuntu LTS 8.04 on a laptop and have an analog modem connected via USB serial cable. The dialup feature and the modem work flawlessly. I am testing LTS 10.04.1 on a live USB drive that I purchased preinstalled from On-Disk. On the live USB drive, I am able to get a dialup connection with my ISP long enough to pull up a web page with the browser. However, the analog modem disconnects within minutes with exit codes 16 or 17.
Man pppd:
16 The link was terminated by the modem hanging up.
17 The PPP negotiation failed because serial loopback was detected.
My questions are, how to do I track down the dialup setting(s), or file configuration(s) that is causing the disconnects? Is the problem likely due to a poorly worded AT modem command? I want to get this problem resolved before I proceed with upgrading from 8.04 to 10.04.1.
I recently downloaded the latest minimal Ubuntu ISO from the official download page.
Is it possible to do a minimal install if I do not have Ethernet capable internet?
I use one of those 3G (cellular) USB modems from companies like Verizon. Basically, it's a cell-phone, with the phone component taken out.
I did something similar with Debian recently, but I had to install the kernel along with the 'dpkg' package, to the HDD. From there, I had to reboot into the core system, install the packages like ppp, wvdial, etc, and then continue with a fresh install of the rest of the system.
There doesn't seem to be a way for me to either install the core files to HDD, or install the internet connectivity packages in the live environment for my modem.
I have FC4 installed on my system and my internet connection is a ADSL through a Router but i have a wireless isdn line as backup connection the modem i use is LG LSP 340E which is a limited mobility cdma phone with in built modem, the supplier and manufacturer has given drivers for windows only. How to install this modem onto my system, I had tried auto detection but it didn't work, I had connected the modem to the serial port in my system.
View 2 Replies View Related