My adsl device currently used as Auto eth0 only works when i plug in to the computer. The device doesn't starts automatically as it does in Windows. How can solve this ? Each time I try to connect internet after restarting , I should manually plug the cable to the port.
View 3 RepliesI recently updated from Fedora 9 to Fedora 12. Everything else works fine, but the situation with Fedora automatically recognised new devices when plugged in has changed to the exact opposite. Under Fedora 9, all devices I plugged in were always automatically recognised, whether I liked it or not. Under Fedora 12, nothing is ever automatically recognised any more. Whenever I plug something in, the system just ignores it. If they devices turn up as block device descriptors in /dev, I can manually mount them and access them through the mount points. Otherwise, I can't do squat. Now I can only access my digital camera by manually mounting it and copying the files. This works, but is cumbersome. Under Fedora 9, I used to be able to use GPhoto to download the pictures via PTP. Not any more. GPhoto acts as if the camera wasn't even there. So does F-Spot. What has happened? Have I missed installing some kernel module or service or something?
View 1 Replies View RelatedI just did a clean install and ran system-config-network from command line to fix my IP settings. Everything works but when I reboot, my NIC is gone from #ifconfig -a
I have to login to the GUI and go to System --> Administration --> Network --> "Click on my NIC" --> check the box that says "Activate device when computer starts"
Once this box is checked, everything works fine. - I have turned off NetworkManager and just use the network service to manage my ip settings.
I was wondering if this "Activate device when computer starts" can be done through the command line without having to access the GUI?
I upgraded Fedora 10 to Fedora 11 via preupgrade. And now system succesfully boot, but Gnome doesn't starts (i think). There is only black screen and I can only write there.
View 14 Replies View Relatedeverything works perfect including reboot and shutdown but not the hibernate or suspend (sleep). Whenever i try to do Suspend, my caps lock starts blinking and the screen goes white
View 2 Replies View RelatedIt was running squeeze before it became stable. X was running fine and loading automatically on booting. Then I did not use it for some time. Then I ran apt-get updates and upgrades after squeeze became stable. A few packages were kept back. So I did aptitude dist-upgradeIt installed some things and maybe removed some things. After that it will boot only toconsole. When I do startx on the command line, X session starts and everything seems normal. But it will not boot to the GUI like before. I also checked in the Synaptic and saw xorg and xserver-xorg still installed
View 11 Replies View RelatedSince a few weeks my PC have been working slow and the gnome system Monitor says that my cpu is working at 100% all the time. when I ran top command appears:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
770 root 20 0 4060 308 240 R 76 0.0 8:41.05 yes
919 root 20 0 4060 312 240 R 49 0.0 8:23.39 yes
[code]...
I just reinstalled Ubuntu alongside windows for a dual install. The installation went ok but when Ubuntu said it needed to restart to complete, now my pc just loads windows 7 everytime. It doesnt give me an option of choosing Ubuntu. I know the install worked because when I look at my drive in windows it is the partitioned size. Any way to manually launch Ubuntu?
View 6 Replies View Relatedsome times network disconnected automatically. if we restart rhe server it automatically starts to work. again 2 or 3 days, the same senario is happening. on this server 2 database is running, it makes lot of problem to us. what will be the problem? is any connection parameter is there? (ie i mean only 50 numbers of client connection is only allowed like.) or any problem in NIC card or NIC driver.
View 4 Replies View RelatedMy pc has two operating system, XP and Fedora 14 I was setted PC to Auto turn on with BIOS, after turning on, system was booting in fedora automatically after 10 seconds.
But, After i upgrade to fedora 15 via terminal(Preupgrade), that auto booting has disabled. I should Press Enter to boot into Fedora 15. It should be have auto booting into feodra 15 like when i was fedora 14.
I want to start recording when someone starts talking, and stop recording when it becomes silent. I guess if there is stream audio processing tool like ImageMagick, so I can strip away blank sections like this:
$ rec -t wav - | wavefilter -strip-blank=3sec | lame - >record1.mp3
EDIT This question is resolved by using:
$ rec -t wav - silence 1 0.1 3% -1 1.0 3% | lame - >record1.mp3
I get the following error message when I try to access all of the sections in Add/Remove Sofware;
"No package cache is available. The package list needs to be rebuilt. This should have been done by the backend automatically
failed to search names: failure: repodata/5374141db0e227497be1e7ced5f1c45dafbe2f1899874f961f 7c54478b112bb9-primary.sqlite.bz2 from updates: [Errno 256] No more mirrors to try[
I just installed openSuse11.3 on my desktop, but when I switch on my pc, windows starts aumatically. I can run openSuse only if I insert installation cd, select BOOT FORM HARD DISK and then Grub appears...I have a problem also with screen resolution, I installed nVidia drivers, but the maximum resolution is 1024X768...
View 3 Replies View RelatedI'm connected to the internet using a wireless router. Each time I boot, I have to grant root privileges and type in a shell: iwconfig wlan0 essid linksys key dhclient wlan0 Isn't there a file(or location) that I can modify to automatically grant root privileges and execute these commands when debian starts? Something like autoexec.bat in windows.
Something else I'd like to mention is when I execute iwconfig.... for the first time, I get this incomplete result:
IEEE 802.11bg ESSID:"linksys"
Mode:Managed Access Point: Not-Associated Tx-Power=27 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key***********
Power Management:off
[Code]...
I'm new to debian ,I was trying to mount my NTFS partition but I did that only with read permissions I couldn't install ntfs-config(allthough I have ntfs-3g installed).So I want to figure out how to mount my partitions with read/write permissions automatically as the systeme starts ?
View 2 Replies View RelatedMy computer was working this morning and both hard drives were working fine, then all of a sudden for about two hours I was stuck with this "problem", then after fumbling and moving and stablizing things, then Windows works? See below for details. I've finally reinstalled both hard drives, but the one with the Linux partition doesn't work: it says nothing is discovered on the disk. I can't login at the LUKS login after grub starts, therefore I can't get into Linux, but Windows works?! I used to be able to go directly into Grub when the computer starts, I forgot how to do that but it doesn't matter. If you need details I'd be glad to provide them. I just wondered why Linux doesn't work, but Windows does. I have Linux & Windows on two different separate hard drives
View 5 Replies View RelatedStruggled a little to get Broadcom driver working with my Dell laptop. But I am at a point where if I manually type 'modprobe b43' the wireless works. If I reboot, it doesn't work automatically and I have to 'modprobe b43' again. Any ideas what I am missing here?I can't seem to figure out how to get this to work automatically. I did check to activate device when computer starts in network manager
View 1 Replies View RelatedI'm new to Fedora and have a problem with the network manager. Everytime I start Fedora, it does not automatically connect to the default WIFI Browsed Google and just found [URL]..
View 1 Replies View RelatedI have a Sansa Clip + ,it works just fine in MSC mode. I wanted to give a try to the MTP mode. But it does not show up in Amarok. I have libmtp installed and mtp-detect does show up the device information.
View 6 Replies View RelatedCan anyone tell me what command can be used so that the Linux Centos Server starts mysqld, httpd and ftpd services at boot time automatically?
View 2 Replies View RelatedMy software RAID setup is as follows.
/dev/md0 (made from sda1 and sdb1) RAID1 /boot partition
/dev/md1 (made from sda2, sdb2, and sdc2) RAID5 / partition
Earlier on I had some trouble with my sda drive, it dropped itself from both arrays, screwing up the mirroring of my two raid partitions participating in the /boot partition. I eventually got everything sorted out and back in sync. (I also have grub installed to MBR on both sda and sdb). Things are working fine regarding that, but since then I've had this issue:
During boot up, I'll get an error message that it could not mount my /boot partition (when fstab is set to either /dev/md0 or the UUID). It claims c9ab814c-47ea-492d-a3be-1eaa88d53477 does not exist!
My fstab:
Code:
[mark@mark-box ~]$ cat /etc/fstab
#
# /etc/fstab
# Created by anaconda on Wed Jan 20 16:34:41 2010
[code]....
As far as I know, it isn't neccessary for /boot to be mounted always, correct? Although, as I understand, I need to have it mounted whenever making kernel changes correct?
in Debian Lenny, using TightVNC 1.3.9 I can setup a VNC server manually by using
Code:
vncserver -query localhost -once -geometry 1024x768 -depth 16 :1
But then, as I have read is a better option, I use xinetd with the following configuration:
Code:
service vnc-1024x768x16
{
protocol = tcp
socket_type = stream
wait = no
[Code].....
In fact, I was considering that the problem was with xinetd, but I have other services setted up with it (telnet & ftp for example) and I can use them correctly.
So now I'm lost with this, what else am I not considering with VNC service through xinetd? Where can I find logs or useful information to get a clue about this problems?
I'm installing OpenLDAP on a VSP server, CentOS 5 with Plesk at 1and1. I've tested the slapd.conf file with slaptest and it returns ok. I've tried to start ldap with /sbin/service ldap start and it says it is ok and starts. But if I try to run ldapadd I get an error message saying that it could not contact the ldap server. I check the status with /sbin/service ldap status and it show that it is not running. I can do /sbin/service ldap start, it will say it started and turn around and check the status and it will show that it is not running. Would something in Plesk be killing ldap as soon as it starts? I installed OpenLDAP via yum and have been following directions found in a couple of ldap guides.
View 5 Replies View RelatedI hope this is in the right spot, and I have searched but haven't been able to find anything to help me out.
I installed GIMP recently, it worked for awhile, but now it will not open up even after the 'Starting GIMP...' appears. That goes and nothing happens. I've tried un-installing and installing via the software centre as well as via the terminal with no success. Will be happy to go through steps again if someone gives me some guidance.
trying to configure a Centos 5.5 server (simple file server with DHCP and DNS relay). I configured and tested the config (by 'service dnsmasq configtest') of dnsmasq and I got the message 'dnsdomain:host unknown (translation of the real message : hte inconnu) and I didn't find where I could define this host ! The hostname of the server is well defined and I can see it from all Windows PC's on the LAN. dnsmasq starts (with hte same message as in configtest) but when querying DNS from PC's te.g. trying to surf the Internet), I don't get replies (3 DNS servers are also well defined and operational).
View 2 Replies View RelatedI'm running CentOS 5.4 on i386 machine with 2.6.18-194.3.1.el5Whenever I login into Gnome, a gnome-termial window comes up. Instantly title says root@localhost before settling with user@localhost with current directory as ~/Downloads. Only happens with my particular user account (normal user), not with root as I tried. I also have KDE, Xfce, Fluxbox as other option at login, but terminal only shows up when I log into Gnome (not kde, xfce or fluxbox)I've done and
1. cronetab -e
Nothing there.
2. Don't have ~/.xinitrc ~/.session
3. Nothing in ~/.bashrc or ~/.bash_profile
4. Nothing in /etc/rc.local
I've gotten everything working on my laptop except the webcam. I'm trying to use webkam (from kde repo) but the launcher starts up but the program doesn't start. The driver is "uvcvideo" which loads with no error messages.
Code:
62: USB 00.0: 0000 Unclassified device
[Created at usb.122]
UDI:
/org/freedesktop/Hal/devices/usb_device_c45_6406_noserial_if0_logicaldev_input
Unique ID: MtLc.1biges91ot8
Parent ID: k4bc.cO89g+iefn1
[Code]...
I have a Ubuntu box (10.10 x64) that i use for XBMC (a media center), everything works fine when i boot up and start adding network shares (the shares are on a Ubuntu 10.04 x64 Server). it doesn't matter if i use NFS or SAMBA to mount the shares, both work. BUT when i reboot i get problems The share mounts come up but to late, XBMC doesn't see the share when it starts.
The thing i see is : When i boot up the lights of my NIC (realtek 8111) are on and flickering, but just a few seconds before the login prompt comes up the lights are off. And then after 15 to 20 seconds everything comes up again, and the shares are mounted, but to late for XBMC (my mediacenter software) i've installed new drivers for my network card (removed r8169 and installed r8168 ) but the problem is still there.
I've got a computer i'm trying to VNC to.
The problem is that when the computer starts up/reboots it doesn't "Unlock the system keyring"(I think that's what it said).
When I try and attempt to connect to the computer it asks for the VNC password(as per normal) but fails to connect after that.
The reason is that the Ubuntu computer prompts for the user's password to unlock the system(locally).
What I want is to be able to turn on the computer without having to worry about entering the password. I've had it running fine on 8.04 yet the newer version seems to be annoying :s
The system is set to automatically login on startup too.
I've tried this: "delete the keyring folder under /home/XXXX/.gnome2" then setup remote desktop again. But that hasn't worked either. I still have to enter the password to a keyring
I got a headless server which should, when I plug in a usb stick/device, automatically mount it and execute a script (the script is located on the usb stick). Actually I'm talking about auto-mount & auto-run which is already present in desktop systems but not in server systems. until now I had manually mounted the usb stick via ssh connection and then executed the script by hand.
View 4 Replies View Related