I get the following error message when I try to access all of the sections in Add/Remove Sofware;
"No package cache is available. The package list needs to be rebuilt. This should have been done by the backend automatically
failed to search names: failure: repodata/5374141db0e227497be1e7ced5f1c45dafbe2f1899874f961f 7c54478b112bb9-primary.sqlite.bz2 from updates: [Errno 256] No more mirrors to try[
While trying to install a package using gpk-application ("Add/Remove Software" under System Tools), I accidentally checked the "Do not show this message again" checkbox, and now gpk-application does not list the package dependencies anymore.
I tried to go back to listing the dependencies, however, I could not find a way to do it. How do I revert to the default behavior, i.e., having gpk-application listing the dependencies again?
When trying to rebuild a RAID1 on a FastTrak TX4310 controller after a disk was replaced the below message is given:
Code:
[root@SAMBA Samba]# dmraid -R pdc_gigcjhdfa /dev/sdc
Volume "pdc_gigcjhdfa" is not in rebuild state (current: 16)
Rebuild: cannot rebuild from current state!
I found a post here somewhere detailing the steps to make wpa supplicant work with EAP-FAST, however the steps appear to be old.
I was able to patch openssl using the openssl-tls patch supplied with wpa supplicant package, however when I try to rebuild the package for install, it fails quite horribly.
is there a known good set of instructions for 10.4 and how to get eap-fast working using an anonymous supplied PAC?
I'd really like to convert my HP laptop over to ubuntu, but unless I can get my corporate wireless functioning, I won't be able to.
I have F15 and use networkmanager to connect to wifi networks. How do I edit the list of saved wireless networks that it tries to automatically connect to? I need to get rid of some networks that it is always trying to connect to.
View 2 Replies View RelatedI have spent hours installing different packages and have everything pretty much how I want them. Is there a way to get a list of all the packages and/or save it in a way that should I need to reinstall, I do not miss anything
View 1 Replies View Relatedi hav used ubuntu bfor i jus want to know how to see n change my source list or add a new source list
i am using a proxy in my campus in gettin my yum work it never refreshes package list
I don't know why I can't get listed the installed and not installed packages in the "Add and Remove Software" utility in Fedora 11 with KDE Desktop. I have already used it with no problems, but for some reasons I had to reinstall the system, and I got this problem since then. So, I can't remove packages because the list is empty (picture attached), and for the same reason I can't add new sofware from the Installation DVD.
View 7 Replies View RelatedI m using pidgin2.5.5-1 that is old version of pidgin because of some proxy issue, I dont want to update it anymore but it keeps on showing its update in package updater its very annoying...How could i get rid of it ?I want package updater show all updates except this...that is permanently remove it from update check list.
View 2 Replies View Relatedi want to knw where can i find the list of all the repositories from where rpm and yum fetches the package and also the location where all the packages are installed by rpm and yum
View 2 Replies View RelatedI recently updated from Fedora 9 to Fedora 12. Everything else works fine, but the situation with Fedora automatically recognised new devices when plugged in has changed to the exact opposite. Under Fedora 9, all devices I plugged in were always automatically recognised, whether I liked it or not. Under Fedora 12, nothing is ever automatically recognised any more. Whenever I plug something in, the system just ignores it. If they devices turn up as block device descriptors in /dev, I can manually mount them and access them through the mount points. Otherwise, I can't do squat. Now I can only access my digital camera by manually mounting it and copying the files. This works, but is cumbersome. Under Fedora 9, I used to be able to use GPhoto to download the pictures via PTP. Not any more. GPhoto acts as if the camera wasn't even there. So does F-Spot. What has happened? Have I missed installing some kernel module or service or something?
View 1 Replies View RelatedMy adsl device currently used as Auto eth0 only works when i plug in to the computer. The device doesn't starts automatically as it does in Windows. How can solve this ? Each time I try to connect internet after restarting , I should manually plug the cable to the port.
View 3 Replies View RelatedMy pc has two operating system, XP and Fedora 14 I was setted PC to Auto turn on with BIOS, after turning on, system was booting in fedora automatically after 10 seconds.
But, After i upgrade to fedora 15 via terminal(Preupgrade), that auto booting has disabled. I should Press Enter to boot into Fedora 15. It should be have auto booting into feodra 15 like when i was fedora 14.
Struggled a little to get Broadcom driver working with my Dell laptop. But I am at a point where if I manually type 'modprobe b43' the wireless works. If I reboot, it doesn't work automatically and I have to 'modprobe b43' again. Any ideas what I am missing here?I can't seem to figure out how to get this to work automatically. I did check to activate device when computer starts in network manager
View 1 Replies View RelatedI'm new to Fedora and have a problem with the network manager. Everytime I start Fedora, it does not automatically connect to the default WIFI Browsed Google and just found [URL]..
View 1 Replies View RelatedMy software RAID setup is as follows.
/dev/md0 (made from sda1 and sdb1) RAID1 /boot partition
/dev/md1 (made from sda2, sdb2, and sdc2) RAID5 / partition
Earlier on I had some trouble with my sda drive, it dropped itself from both arrays, screwing up the mirroring of my two raid partitions participating in the /boot partition. I eventually got everything sorted out and back in sync. (I also have grub installed to MBR on both sda and sdb). Things are working fine regarding that, but since then I've had this issue:
During boot up, I'll get an error message that it could not mount my /boot partition (when fstab is set to either /dev/md0 or the UUID). It claims c9ab814c-47ea-492d-a3be-1eaa88d53477 does not exist!
My fstab:
Code:
[mark@mark-box ~]$ cat /etc/fstab
#
# /etc/fstab
# Created by anaconda on Wed Jan 20 16:34:41 2010
[code]....
As far as I know, it isn't neccessary for /boot to be mounted always, correct? Although, as I understand, I need to have it mounted whenever making kernel changes correct?
When i try installing anything i get errors, for example when i try to install somthing from ubuntu software center i get this.
Code: installArchives() failed: Preconfiguring packages ... Preconfiguring packages ... Selecting previously deselected package ttf-symbol-replacement. (Reading database ... dpkg: warning: files list file for package `libsdl-image1.2' missing, assuming package has no files currently installed.
[Code]....
I am just starting to use fedora as I'm on compsoc committee at my uni, and need to be able to use the server which runs it. Am trying to get a mumble server running (just on my laptop with a fedora 14 install) And am really struggling, can't get the stuff manually and do it, as it says it depends on some other packages which I can't find in the package manager, and if I just use the murmur package in the manager, then it doesn't seem to install, and even if it does, if I try to run it, it says the database is not writeable
[URL]
I'm using 'Adobe Flash plug-in 10.3.183.4ubuntu0.11.04.1', installed from the package repos on kubuntu, and since the last update, it has broken all flash functionality in both rekonq and firefox.I have tried removing and reinstalling the package multiple times, both with and without the browsers open. Can anyone suggest a way to restoring functionality?
View 7 Replies View RelatedI found that sometimes if I have opened file manager window (Dolphin) it does not refresh list. Example, if I already have Dolphin opened and then create file in Terminal - i need to press F5 (refresh) to see newly created file
View 9 Replies View RelatedI have been using F12 for while now, I had applied update when it available. After the latest update, my laptop have lot of Kernel Crash error and it hang up more often. I try to upgrade to the F13 or F14 but not successful at all. My only hope now is to rebuild the Kernel to the early Kernel. How to rebuild the Kernel to 2.6.31.5.
My current Kernel is 2.6.32.26-175.fc12.i686.PAE
Gnome 2.28.2
1G memory
Intel PIII mobile 1.13G
my problem is inkscape-0.48.0-1.fc14.3.src.rpm in fedora 14 64 bittry rebuild --source inkscape-0.48.0-1.fc14.3.src.rpm and this my error:I think something wrong pkgconfig .
attributes.cpp:20:32: fatal error: glib.h: No such file or directory
compilation terminated.
arc-context.cpp:21:28: fatal error: gdk/gdkkeysyms.h: No such file or directory
[code]....
Does anyone know of a way to do a mass build of srpms? For example if I wanted to build loads of packages but with different default installation paths or compiler flags. Are there any tools to do this?
View 2 Replies View RelatedOn Ubuntu, the local user is automatically added the xhost list when logging in (via a script in /etc/X11/Xsession.d).
Is there a way to enable this in OpenSUSE?
(My original problem is that I cannot interact with a running X session when loggin in via SSH, since newer GDM versions don't create $HOME/.Xauthority any longer.)
In general I love Ubuntu Karmic, and think it's the most polished Gnome distro out there, but since installing it on my laptop alongside Fedora I haven't been able to boot into the latter.
I know that I could fix it by adding an entry into the 40_custom file, but wonder if there's a simpler fix.
The command
Quote:
sudo update-grub
actually finds and lists the Fedora Constantine kernel, but it still doesn't appear in the bootloader menu. Before I delve around and break something, does this mean that there's a line commented out in one of the config files?
I'm not going to slag off Grub 2 because I can see that it has clear benefits, especially for power users, and I don't mind change if it brings clear benefits. So long, /boot/grub/menu.lst.
I tried to install the Catalyst 9.9 driver on Fedora 11 64bit. Only when I was finished with the guide, I read the comments that said it wouldn't work on 2.6.30 kernel.I've written over my old xorg.conf, blacklisted radeon and radeonhd, restarted my machine.When i restarted my machine X wouldn't work ofcourse and all I got is some red coulor in the top of the screen, and no access to terminal via ALT+F2->F6. only way to get access is to add "telinit 1" to the startup line in GRUB
I've tried
Code:
X -configure
and
Code:
system-config-display --reconfig
The first dosen't work and the last dosen't seem to be installed....since i'm on wireless the network has problems to connect....I can pull a cable but not right now.....
I have yet to try:
Code:
[root@fedora ~]$ /usr/share/ati/fglrx-uninstall.sh
I see some drastic changes on the fonts' of several websites I visit regular. Everything is ok when I try to remove the package msttcorefonts. The question is, why does this package install by itself? I remember that I've uninstalled it several times!
View 1 Replies View RelatedJust ran update, and it automatically installed an acroread package (9.4.2 60.5Mb). Thing is I removed acroread in favour of foxit a while back.Why would I receive updates for programs I no longer have installed?
View 3 Replies View RelatedI've cloned a machine by removing a HDD from a Raid mirror set putting it into another machine and powering on and fsck'ing a few times and everything is great apart from the ethernet port numbering has gone a bit wonky.
The cloned machine which must have a specific configuration using eth0,1,2,3 naming convention however when I boot the freshly cloned machine eth4,5,6,7 show up and eth0,1,2,3, are missing (as it detects the new machines ethernet ports)
Is there some configuration file I can delete, reboot the machine and then Fedora rebuilds the file using eth0,1,2,3, and populating with the correct hardware address.I need to clone this machine lots and lots and lots of times and the manual why I've figured out is a little long winded.
whether the command-line tool "mysql" comes with mysql-server or mysql-client (I installed both at once, so I have no idea). It occurs to me that this is a good opportunity to learn more about linux package management.
I've tried saying "dpkg -L mysql-server", but it only lists the files in /usr/share/docs files for some reason. I'm sure there's got to be files elsewhere. Am I way off base?