Fedora :: 12 Doesn't Automatically Recognize Any New Device?
Feb 22, 2010
I recently updated from Fedora 9 to Fedora 12. Everything else works fine, but the situation with Fedora automatically recognised new devices when plugged in has changed to the exact opposite. Under Fedora 9, all devices I plugged in were always automatically recognised, whether I liked it or not. Under Fedora 12, nothing is ever automatically recognised any more. Whenever I plug something in, the system just ignores it. If they devices turn up as block device descriptors in /dev, I can manually mount them and access them through the mount points. Otherwise, I can't do squat. Now I can only access my digital camera by manually mounting it and copying the files. This works, but is cumbersome. Under Fedora 9, I used to be able to use GPhoto to download the pictures via PTP. Not any more. GPhoto acts as if the camera wasn't even there. So does F-Spot. What has happened? Have I missed installing some kernel module or service or something?
View 1 Replies
ADVERTISEMENT
Jun 5, 2010
My adsl device currently used as Auto eth0 only works when i plug in to the computer. The device doesn't starts automatically as it does in Windows. How can solve this ? Each time I try to connect internet after restarting , I should manually plug the cable to the port.
View 3 Replies
View Related
Jul 22, 2010
I'm new to fedora, I just downloaded f13 and am running it from a live cd. I have a wlan usb device (vigor510) that works fine with XP, but not with fedora. when i try iwconfig it says there aren't any wireless networks, and there's no device /dev/wlan0.
A little more info:
lspci:
View 14 Replies
View Related
Feb 2, 2010
I have been using fedora 12 for quite some time. When i first installed Fedora on my new system i created 2 ntfs partitions on the hard disk using mkfs.ntfs and in the space at the end of the disk i have Fedora. recently i tried installing Win7 but it didnt recognise the partitions even tho they are NTFS. I had to format 1st partition from setup to install Win7. After boot i find that Win7 doesn't recognise the 2nd partition as welL. The partitions are working fine in Fedora.
View 14 Replies
View Related
Nov 22, 2010
Do I need to install drivers or something to get it to recognize that my laptop is equipped with wireless? It's a Toshiba Satellite L505-S5990.
View 9 Replies
View Related
Jun 6, 2011
I am having a problem installing Fedora from a CD.When I put the installation CD into the drive and restart the computer, the computer does not recognize the CD and boots automatically into my old version (version 8) of Fedora.I have already made sure that the CD drive comes before the HDD drive in my BIOS settings, and I have already tried using different CDs.
View 10 Replies
View Related
Oct 16, 2009
I have been using Fedora 11 for some time and I ran into a major problem today. I had installed some packages by yum (especially bacula-related) and erased them. Now I can't use gnome-terminal as root. Quote:
[webman@localhost ~]$ su -
Password:
su: incorrect password
The password is correct, but it is not accepted as such.
View 4 Replies
View Related
Dec 15, 2010
I have just installed F14.I installed Wine and iTunesSetup.exe.When I installed iTunes it said it couldn't import or burn cds.It also said that maybe playback could be a problem.None of this is an issue for me as I only want to use it to load my ipod.When I plug in my ipod it doesnt show up in the left hand menu bar as I'm told it should.How do I load my ipod?---------- Post added at 05:53 PM ---------- Previous post was at 04:54 PM ----------After installing the 293 updates available to F14 I found that an ipod icon appeared on my desktop.Can I just copy mp3 files to here. There are a few folders, where would I copy them to?It would be good if I could transfer files without Wine. Lately I've been alergic to all things Microsoft.---------- Post added at 06:11 PM ---------- Previous post was at 05:53 PM ---------- iTunes wont even start up from the desktop icon
View 4 Replies
View Related
Jan 16, 2010
i bought a new laptopt Gateway, core i3, intel video card. I've tested ubuntu and mandriva without good video results. I have installed Fedora 12, i'm using an external lcd samsung screen on the vga port, it works fine. My display properties shows two screen as well as the correct resolutions...the problem it that i can't use my latopt screen, i have tried different resolutions..but nothing. I can't use mi laptopt without an external screen.Even if i boot without my external screen, my laptopt screen goes black.
View 14 Replies
View Related
Jun 8, 2010
my cisco wireless card model # wmp600n. Fedora doesn't even recognize that its there and i haven't been able to find any linux drivers for it, tried installing the driver using wine but still isnt working for me...
View 2 Replies
View Related
Jan 23, 2010
First time this has happened. I installed Fedora first (XP already installed) and then installed Ubuntu 9.10 64. Fedora doesn't show up on boot up menu. I've tried update-grub.
Before I would have just edited menu.lst, but now?? I dunno.
edit; Here's fdisk with Fedora on sda6
View 9 Replies
View Related
Jul 13, 2011
My pc has two operating system, XP and Fedora 14 I was setted PC to Auto turn on with BIOS, after turning on, system was booting in fedora automatically after 10 seconds.
But, After i upgrade to fedora 15 via terminal(Preupgrade), that auto booting has disabled. I should Press Enter to boot into Fedora 15. It should be have auto booting into feodra 15 like when i was fedora 14.
View 2 Replies
View Related
May 31, 2011
I upgraded F14 to F15; However, F15 no longer recognizes my 3 sata disks connected through Marvell controller. The controller is an integrated Marvell chipset 88SE6480. The controller has its own manufacturer driver but it was intended for RHEL 5.4 (mv64xx) and installation of this driver fails to generate mv64xx driver.
View 3 Replies
View Related
Aug 24, 2010
I get the following error message when I try to access all of the sections in Add/Remove Sofware;
"No package cache is available. The package list needs to be rebuilt. This should have been done by the backend automatically
failed to search names: failure: repodata/5374141db0e227497be1e7ced5f1c45dafbe2f1899874f961f 7c54478b112bb9-primary.sqlite.bz2 from updates: [Errno 256] No more mirrors to try[
View 4 Replies
View Related
Mar 12, 2011
Struggled a little to get Broadcom driver working with my Dell laptop. But I am at a point where if I manually type 'modprobe b43' the wireless works. If I reboot, it doesn't work automatically and I have to 'modprobe b43' again. Any ideas what I am missing here?I can't seem to figure out how to get this to work automatically. I did check to activate device when computer starts in network manager
View 1 Replies
View Related
Jan 2, 2011
I'm new to Fedora and have a problem with the network manager. Everytime I start Fedora, it does not automatically connect to the default WIFI Browsed Google and just found [URL]..
View 1 Replies
View Related
May 31, 2010
I have a SteelSeries Siberia USB soundcard. I'd like to get pulseaudio to automatically recognize it and switch to it when I plug it in.
Currently I have to go alsamixer in terminal, select the device and turn it up (It's always at zero when I plug it in). When I do this I can't control the volume with the buttons on my laptop, i have to either control the volume in the media player or move it up and down in alsamixer.
View 5 Replies
View Related
Jul 21, 2010
I have a SteelSeries Siberia USB soundcard. I'd like to get pulseaudio to automatically recognize it and switch to it when I plug it in. Currently I have to go alsamixer in terminal, select the device and turn it up (It's always at zero when I plug it in). When I do this I can't control the volume with the buttons on my laptop, i have to either control the volume in the media player or move it up and down in alsamixer.
View 1 Replies
View Related
Nov 13, 2010
I have a Sansa Clip + ,it works just fine in MSC mode. I wanted to give a try to the MTP mode. But it does not show up in Amarok. I have libmtp installed and mtp-detect does show up the device information.
View 6 Replies
View Related
Feb 5, 2010
Im not to good with manually making anything work on linux and was wondering if ubuntu will automatically recognize my wireless 1395 mini card...
View 2 Replies
View Related
Apr 6, 2011
I am trying to connect some USB 3.0 HDD's up to a Via Labs USB 3.0 Hub. When I type 'lsusb', it only lists the hub and not the devices. If I plug in a USB 2.0 device to the hub, it can be recognized. If I plug the USB 3.0 device directly into the system, it is also recognized.
In further investigating, I typed 'lsusb -v' and found that the USB 3.0 part of the hub has an error - under where the Hub Descriptor information is supposed to be, it says "** UNRECOGNIZED: 06 30 00 00 02 00 can't get hub descriptor: Broken Pipe"
So that explains why the drive can't be recognized. My question is: Is this a Linux problem or a Via Labs problem? I am running Slackware 13.1.
Is there somewhere on the system I can make Linux recognize this properly?
View 6 Replies
View Related
Feb 7, 2010
My software RAID setup is as follows.
/dev/md0 (made from sda1 and sdb1) RAID1 /boot partition
/dev/md1 (made from sda2, sdb2, and sdc2) RAID5 / partition
Earlier on I had some trouble with my sda drive, it dropped itself from both arrays, screwing up the mirroring of my two raid partitions participating in the /boot partition. I eventually got everything sorted out and back in sync. (I also have grub installed to MBR on both sda and sdb). Things are working fine regarding that, but since then I've had this issue:
During boot up, I'll get an error message that it could not mount my /boot partition (when fstab is set to either /dev/md0 or the UUID). It claims c9ab814c-47ea-492d-a3be-1eaa88d53477 does not exist!
My fstab:
Code:
[mark@mark-box ~]$ cat /etc/fstab
#
# /etc/fstab
# Created by anaconda on Wed Jan 20 16:34:41 2010
[code]....
As far as I know, it isn't neccessary for /boot to be mounted always, correct? Although, as I understand, I need to have it mounted whenever making kernel changes correct?
View 2 Replies
View Related
Nov 9, 2010
i need to shell commands in opensuse linux so when an usb device(flash) plog in, opensuse linux recognize it.what are this commands?
View 5 Replies
View Related
Feb 15, 2010
Well I finally got Bluez running correctly. Now the problem is kbluetooth or blueman recognize my device. Here is the output of hciconfig -a
Code:
hci0: Type: USB
BD Address: 00:1B:DC:0F:CD:84 ACL MTU: 310:10 SCO MTU: 64:8
[code]....
View 10 Replies
View Related
Apr 18, 2010
how can I mount my iPhone in Opensuse? after i connect my device to laptop via USB,opensuse doesn't mount it and recognize it at first as a digital camera.
View 3 Replies
View Related
Dec 21, 2009
I have attached usb memory to my Linux server and I want to add it to my /etc/fstab .Can you please let me know how can I recognize it from my"/dev/?" list ?
View 14 Replies
View Related
Oct 16, 2010
i tried to connect whit this key on opensuse 11.3 but i can't the device is recognized i start to connect it and the system show me "activating" but the light never comes blue , it's always green and it's impossible go to internet i use kde..
View 1 Replies
View Related
Sep 8, 2010
I have an acer aspireone aod250, i putted an external cdrom and downloaded the ubuntu, tried to install it but it didn't recognize the hdd... i though it was the cd, i downloaded ubuntu netbook edition, it did the same. i thought maybe i could try another operative, i downloaded linux mint 9, did the same thing. then ordered a cd from ubuntu.com, got in today, and it doesn't recognize my hdd. btw, the hdd is a seagate momentus 5400.6 with 160gb. i already ran ubuntu with the cd rom and starts the instalation, but when it arrives to the partitioning part of the instalation, it doesn't detect my hdd. but the bios in the pc detects it.
View 9 Replies
View Related
Jan 13, 2011
I'm new to ubuntu. My kingston 4Gb pen drive doesn't recognize from ubuntu 10.04.
View 8 Replies
View Related
Aug 19, 2009
i have an Acer Aspire laptop, 4GB of ram, with Vista and Kubuntu installed (dual boot). When checking my computer properties in Windows, it does say that i have 4GB, but Kubuntu's system monitor says that i have only 2.9GB.
View 4 Replies
View Related
