Fedora :: Can;t Burn DVD But CDs Are Fine
Jan 28, 2011
So, I've been using Brasero to burn cds with no problems, but when I try to burn a DVD video, it starts converting the file mpeg-2 then just hangs about half way through. I tried it like 5 times and then moved on to Bombona, which I heard was great. When I start the burn process for a DVD video with Bombono, it just says "DVD-video building broken ffmpeg failure." its driving me nuts, this shouldnt be so complicated. I havent run into others with this problem, so Im assuming Ive just missed something obvoius.
View 9 Replies
ADVERTISEMENT
Dec 25, 2010
I want to burn a mp3 cd but brasero can't burn mp3 cd. How can I do this. If any further software need burn mp3 cd
View 3 Replies
View Related
Sep 7, 2010
i want use gparted with fedora 13 it is work fine ? or there is another software ?
View 1 Replies
View Related
Oct 4, 2009
Before creating a DVD of an old movie, I tried to free up some hard disk space by burning a batch of old cartoons (Betty Boop, from the '30s.) to a data DVD, and deleting the directory after making sure the burn was good. The burn went fine, and the disc ejected correctly. (This is an important point!) I immediately re-inserted it so that I could check the contents, as I've done many times before, but it never showed up on my desktop.
(F10 with Gnome) I opened Nautilus and found two copies of the DVD listed, and both context menus listed both Mount and Eject, as though Gnome wasn't sure if it was or wasn't mounted. Checking, neither shows up in /media, /mnt or /etc/mtab. At this point, I can no longer mount it or any other disc. I've tried logging out and logging in, with no change. I'd consider a reboot, but my uptime has quite literally reached Biblical proportions and I hate to waste it if I don't have to. How to tell Fedora to let go of a DVD that isn't in the drive any longer?
View 1 Replies
View Related
Nov 19, 2009
New build to F12. Sound was fine in F11. Now, massive distortion. I have tried every possible permutation of settings. With the main volume control in the top taskbar, there are two positions of level setting where the audio drops to a normal level and sounds OK but any application changing the level or starting to use the Pulseaudio changes the level and its loud and massively distorted again.
In the Pulseaudio manager->sink->alsaoutput.pci-0000-00-11.5.analog-stereo -> properties-> show volume meter, the audio is always maxed out in level. I have tried everything, its unworkable right now. Its possible to start alsamixer from terminal and adjust settings for good audio but any future change reverts to distortion. All changes in Pulseaudio Dev mgr or vol control etc change the audio as they should but do not affect the problem.
View 9 Replies
View Related
Oct 27, 2010
How to speed up the menu "fade" (or get rid of it all together) in desktop effects? I need a composite manager for docky but the slower response on menus annoys me as they have to fade in and out. Anyone know which key in apps -> compiz I should change? Is it one of the plugins or one of the general keys?
View 5 Replies
View Related
Feb 8, 2011
I've tried a whole bunch of thigns but things keep crashing and i dunno what to do, I'm using FC14 really i just wanna do it all from the terminal but i dunno what commands or yum installs to use ive been trying for a couple days.I have .avi and i wanna burn them to play on a dvd player.
View 2 Replies
View Related
Feb 18, 2009
Anyone else having trouble downloading F10 from the direct download or the mirrors?
I can download F9 or F11 just fine but F10 stops at 108mb of the 3.9gb.
View 2 Replies
View Related
Mar 26, 2009
I recently installed fedora 9. Everything works fine after install (except sound but thats a different story). When i run updates everything seems to have worked fine but when i reboot afterwards i get to the login screen which works but as soon as i log in it freezes? the only way to restart is to press the power switch...
View 5 Replies
View Related
Aug 16, 2009
I have migrated over to Fedora 11and system works fine *except* I cannot install *any* packages from an RPMhere is the exact error :The name org.freedesktop.PackageKit was not provided by any .service files
View 2 Replies
View Related
Jun 27, 2011
I recently upgrade my motherboard to ASUS P5G41T-M LX. The audio spec is as follows:
ALC887 8-Channel AUDIO CODEC
I set the PC as dual boot, win7 and Fedora 15. When I am in win7, the sound volume is normal, but when I am in F15, the sound volume is very low, compared to in win7. I already set the volume to max in audio settings when I do the comparison. How do I get the volume up?
View 2 Replies
View Related
Jun 20, 2009
I'm getting following error "There was an error writing to the disc: Unhandled error, aborting"
1. I write click file I want to write to DVD
2. select Write to disk
3. select Write
I'm using Fedora 10.I tried three different brands of DVD+R.I was able to burn same DVD+R few months back in the F10..but I did not try recent months.
View 5 Replies
View Related
Jun 21, 2009
i have a file that i'm trying to burn and for some reason when the burn process completes i get the following error message: Error while burning.You do not have the required permissions to use this drive.i'm not sure why this is happening- is there something i have to set/enable to be able to use my DVD drive? i am using brasero to burn my dvd, and it appears that the failure occurs during the verification process.
View 3 Replies
View Related
Jul 3, 2010
Both my cd/dvd drives work fine out of xp so they're connected properly.
I tried to use Brasero to burn an iso to a cd; Brasero responds with the message "Please replace the disc with a supported CD or DVD." But my Sony and Maxell discs should be supported, so what could be causing this message?
Is the bash command cdrecord an alternative to Bresaro? If so then what is the command syntax to burn file.iso to a cd in a cd/dvd drive?
View 3 Replies
View Related
Jul 19, 2011
I seem to be having trouble getting the Fedora Live CD onto CD. I have the iso, downloaded as a torrent.
I used: wodim -v -dev=1,0,0 -data /home/pedroski/Downloads/Fedora-15-i686-Live-Desktop/Fedora-15-i686-Live-Desktop.iso
I get no errors;
....a lot of blurb ....then
Performing OPC...
Starting new track at sector: 0
Track 01: 565 of 565 MB written (fifo 100%) [buf 100%] 24.0x.
Track 01: Total bytes read/written: 592445440/592445440 (289280 sectors).
Writing time: 241.472s
Average write speed 16.4x.
Min drive buffer fill was 99%
Fixating...
Fixating time: 21.222s
BURN-Free was never needed.
wodim: fifo had 9332 puts and 9332 gets.
wodim: fifo was 0 times empty and 9141 times full, min fill was 89%.
But when I reinsert the CD, it says 'blank CD inserted' I check properties, it says: 0 bytes used, 0 bytes free.
View 4 Replies
View Related
Apr 29, 2009
I am trying to migrate an XP Laptop to FC 11. I downloaded the latest KDE-Live-x86 image and burned it successfully. When I boot with it however, I get the splash screen and no further.Any option I choose, ncluding the CD diagnostics and Memory Test result in the following:invalid compressed format (err=1)--System HaltedI'm certainly no expert, but am not a linux noob either, yet am at a total loss.Google has yielded many theories, but no solutions. It seems that this error is not exclusive to FC 11 either. Older fedoras, as well as non RPM distros seem to be intermittently effected as well.I have verified the MD5 of the iso, and have verified the cd against the iso. The disc gives the same error in another computer. I cannot access the on-disc diagnostics. XP runs fine.
View 6 Replies
View Related
Apr 29, 2010
My wireless was connecting fine, but it was impossible to browse with. So, after searching around for a while I found a thread where it said to enter this and reboot.
#echo "net.ipv4.tcp_moderate_rcvbuf=0" >> /etc/sysctl.conf
#echo "net.ipv4.tcp_default_win_scale=0" >> /etc/sysctl.conf
But after entering that and re booting, now I cant even connect to the wireless. It says connecting but times out.
View 13 Replies
View Related
Sep 7, 2010
I've recently salvaged a computer I found gathering dust in the basement and decided I'll have it running on Fedora (I have a summer studentship coming up that needs Linux use so I thought I'd best start learning!). Following a clean install, Fedora can see the wireless network just fine. I try to connect and nothing happens. Half of the time it will ask for the PSK (yes, I promise I'm entering it correctly) and the other half of the time it will just stop. When it does ask for the PSK I enter it (correctly) and it will ask me again... and again.
Quote:
uname -r
2.6.33.3-85.fc13.i686
Quote:
lspci
00:0b.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
[Code]....
View 11 Replies
View Related
Feb 20, 2009
I have a clean Linux box on which I want to install Fedora 10.I downloaded the 3.6GB ISO file (Fedora-10-i386-DVD) onto my Windows Vista machine, and then installed ISO Recorder, with which I burned the image to a DVD.I was surprised that the image took only about 10 minutes to burn, maybe less.When I then tried to install Fedora 10 on the Linux box from the DVD, after a minute of checking devices and such, it says "Error loading operating system." It goes no further.I'm thinking that the technique I used to burn ISO into the DVD was insufficient. I followed the instructions I found in the ISO readme for burning with the ISO Recorder V2 Power Toy:Obtain and install the ISO Recorder power toy from the
1. In the file manager Explorer, right click on the first Fedora ISO file.2. In the context menu, select Copy image to CD.3. Follow the steps given by the CD Recording Wizard pop-up.4. Repeat for the remaining ISO files.Actually, the ISO Recorder I downloaded said nothing about being a "power toy"--it was ISO Recorder V3.1 - for Windows Vista/Windows 7. But the wizard gave no choice of specifying which in the ISO were boot code vs. package code. It was basically a one-click burn. I just selected Image File (Fedora-10-i386-DVD.iso) and clicked Next. I expected there would be a step for specifying something about boot code. Or, when you install Fedora from
View 14 Replies
View Related
Aug 1, 2009
Is there an easy way to burn mp3 on Fedora ? Brasero doesn`t want to and I haven`t found the relevant plugin, and I can`t install Kb3 the Add/Remove even with RPM fusion.
View 6 Replies
View Related
Apr 10, 2010
I'm trying to burn a DVD on Fedora 12 using:
- a LG BH08LS20 [ BR burner ] (either SATA or USB)
- a LiteOn LDW-851S [ DVD burner ] (USB)
It's slow (reported speed of 0.3x). The same burner in windohz or Ubuntu gives full speed. The LG is new but the LiteOn burner was working fine on previous Fedora.
View 14 Replies
View Related
Mar 6, 2011
Update:so I can burn DVD+Rs fine. I burned Fedora 14 originally on this machine (in F13), although I'll have to check to see what kind of disks I was using.
Here is my posting from unix.stackexchange.com:
I have been trying to burn a few ISOs lately with no success and have certainly used this hardware in the past, so I am not sure what's going on. I am using DVD-R media (tried multiple discs) which appears to be supported by my drive. Here is the error I received in GnomeBaker on Fedora 14 (64):
Code:
Executing 'builtin_dd if=/home/tja/Downloads/Torrents/bodhi_0.1.6.iso of=/dev/sr0 obs=32k seek=0'
:-[ PERFORM OPC failed with SK=2h/CANNOT WRITE MEDIUM - INCOMPATIBLE FORMAT]: Wrong medium type
/dev/sr0: "Current Write Speed" is 1.0x1352KBps.
[code]....
View 9 Replies
View Related
Mar 3, 2010
Im wanting to take the DVD version of Fedora and put it on multiple CD's...i currently have no DVD Reader in the machine i want to install Fedora..
View 1 Replies
View Related
Dec 21, 2009
I originally posted this in I kind of feel like no one is going to answer... is it because I mentioned Fedora? Since I'm trying out Fedora 12...maybe someone here can help me figure out why I have the problem in Ubuntu, but not Fedora?Here's the situation:I've been having very strange problems on Firefox in Ubuntu 9.10 for a few weeks now.haven't been able to, except for a few minutes....once..... and it never came back. This was when these problems had already been happening and after several tries to reach Fedora's site.
Other problems are just as strange but not so bad or consistent: Pages sometimes seem to randomly not be found or they are found on the wrong server or something. After several minutes, though, they usually go away after refreshing the page.One of the strange examples from the "not found" or error pages I got was when I tried reading Wikipedia.org and it told me it "could not be found on this server," but....the server and URL it listed were from Google.com! The address bar showed that it was trying to find the page on Google! No, I didn't copy and paste or type the address, I was in an already-working Wikipedia page that stopped working and thought it was on Google's servers! Isn't that weird? (I might have screenshots somewhere...)
Anyway, any ideas? I have tried creating new, empty profiles on Firefox, but they still cannot access Fedora's sites. LiveCDs work fine, though. Also, I copied and used a profile from my Laptop to here and it also cannot access it.I even tried System > Administration > Network tools and tried Fedora's site in the Ping tab and it usually works just fine (sometimes it gets nothing, though).Also, I'm not using wireless or dial-up.By the way, I've only been using Linux a couple of months now, so sorry if I don't know stuff
View 7 Replies
View Related
Dec 10, 2010
I've been troubleshooting this problem for several hours now and I'm out of ideas. My internet connection is fine in Windows 7 but an older computer I resurrected (AMD Athlon 1.7 GHz, 512 MB RAM, Fedora 14 Security Lab Spin) is having the stop-and-go's with its internet connection. It will work for very briefly, then it gets extremely slow, where any page I try to navigate to in Firefox 3.6 takes forever to load.I have a DSL connection and my DSL modem is connected to a Linksys WRT54G2 router. I set up a static IP in Windows but don't know how to do this yet in Fedora 14, and I need to get my internet connection working so I can troubleshoot further, but with it being so slow, I'm having to use Windows to search for problems and then switch over to the Fedora box via KVM (IOGEAR), which I also just started using. I don't think that would be related, but who knows.
View 14 Replies
View Related
May 18, 2011
I have a DSL connection attached to a wireless router at home which at the moment working fine on my windows laptop. However I have problems connecting to the internet via my desktop which has fedora on it and TP-Link PCI Wireless card. The connection with the wireless network keeps restarting, disconnecting and reconnecting and when it is connected either no internet or very slow sluggish internet barely loading the webpage title.
I installed Ubuntu and the same problem is happening.Yesterday However everything was working fine even on the desktop.
When I first installed Fedora about 4 days ago I had the same problem but when i restarted the computer everything worked fine. Restarting the machine does not seem to solve the problem now.Please help me diagnose the problem here as it's really hard for me to extend a cable from my desktop to my router. And I need to internet on my Desktop.
View 8 Replies
View Related
Jun 13, 2009
I read in the F11 install guide that you can download a install iso image and then do an internet install. Since my F11 DVD hasn't arrived yet; I downloaded that ISO ; and figured it'd be a quicker install anyway, since that way I'd avoid having to download all the updates after the DVD install.I have a USB CD-RW drive attached to my laptop, currently running F7. Almost all of the instructions I see for burning a CD image are for Win users and Win software. I did download Brasero and it's acting flaky; it seems to want to unmount my CDRW drive, even when I'm logged in as root; so it doesn't give me that option to burn to that disk.
I found K3B, but that's for KDE and I'm using Gnome -- is there any good CD burning software (with a link please?) I can use?
View 3 Replies
View Related
Aug 18, 2009
I'd like to know, if there is more recent ISO to be download to burn the FC11 Installation DVD. I could get around this Ndvidia graphic installation problem where I am getting a command line system only.
View 10 Replies
View Related
Jun 28, 2010
Problem is that I can't burn disk using nero linux as normal user. If I try to do so, it tries to create a .nrg image in the drive rather than burning those files in the disk. But if i run nero as super user then it works okay. If I run it as normal itan't even recognize my burner
View 2 Replies
View Related
May 13, 2011
I can't burn dvds double layer at all. I managed to ruin 3 DVDs so far (DVD burner from fedora says an error unknown appeared and that burn failed. I tried with Gnomebaker and I got:
[Code]...
If you need more info, tell me what you need (also what command to use) and I will write it. I am wondering whether the problem is with the DVDs or if it's a hardware problem.
View 14 Replies
View Related
