i have a file that i'm trying to burn and for some reason when the burn process completes i get the following error message: Error while burning.You do not have the required permissions to use this drive.i'm not sure why this is happening- is there something i have to set/enable to be able to use my DVD drive? i am using brasero to burn my dvd, and it appears that the failure occurs during the verification process.
View 3 Replies
It seems I can't burn any kind of disc (cd/dvd, audio/video/data) usgin my internal sata burner (sr0). I treied googling around and reinstalling everything from dvd+rw-tools up but the error is still there. the burner works fine with windows on the very same pc (dual boot). I tried different media and different speeds. when using an usb burner everything's fine...
[Code]....
i've just burned a livecd (fedora 11), but it doesn't work correctly.it says after i hit boot:
BUFFER I/O error on device sr0 logical block 352328
and then something else, which is similar so i didn't write it down.i read on bugzilla, that is should try to append the boot command with pci=nomsi, but it doesn't work for me
Every time i tried to burn a cd or dvd at the end i get the message "Error while burning. You do not have the required permissions to use this drive"
[Code]...
Running Ubuntu 10.04 now, and still I can't burn a disc without errors. I had a different computer the last time I was able to burn a CD in Ubuntu. ECS K5S5A Motherboard died, and I acquired another computer, running another brand, similar AMD Athlon motherboard. 1.0 GHz processor instead of the 1.05 GHz Athlon processor , but the is laid out very similar.
Installed 9.04 from a disc burnt on the old computer. Trouble with errors in Brasero, and I upgraded through the Update Manager to 9.10 then to 10.04. I replaced the burner with the one out of my dead computer, that burnt successfully before it died, and I still have errors.
My Log:
Code:
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1741)
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_set_output_size_for_current_track
BraseroBurnURI stopping
[Code]...
I'm on 10.04. 64bit (but dont think this is 64bit related)
I have been getting this very annoying error while trying to burn DVD-DL media from an iso using growisofs. Here is the command I used (to burn a backup copy of an xbox360 game)
Code:
growisofs -use-the-force-luke=dao -use-the-force-luke=break:1913760 -dvd-compat -speed=2.4 -Z /dev/scd0=nameofmyiso.iso
Now, every single time, usually around 50%, I get this error:
:-[ WRITE@LBA=aacf0h failed with SK=3h/WRITE ERROR]: Input/output error
write failed: Input/output error
I've been searching around and found threads with people complaining about this error since 2005, but not a single one of them presented any solution (some hint to a kernel issue, which I'd have no idea how to fix. I'm a noob at linux).
I also tried burning it using imgburn under wine, same error, also at 50%.
This is very frustrating, Ive burned around 6 coasters so far and DVD-DL are expensive to keep on this trial and error.
p.s It's not faulty media before anyone asks. I tried it on Mac and it worked fine. Also, this drive worked well before, before I migrated this machine.
I created a ISO under DeVeeDee and went to burn it with Brasero (also tried with K3B) and they both came up with error messages.k3b comes up with "Internal error. Short read! Please report" and stops at around 3% and 3-4 minutes into burning. The same error happens under Brasero, it'll stop after a few minutes.
View 1 Replies View RelatedI can play CDs and DVDs but when I try to burn a music CD I get:
error while burning
an unknown error occurred
when the CD is finalising. As data has been written to the CD, but not finalised, each time I try I use another CD.
I've used Brasero and whatever the default burner in 9.10 is with the same result. If I boot in Win7 I can burn CDs.
I've been trying all week to get mpg to dvd, my dad has a video that is supposed to be aired on television soon and the deadline to have it in is tomorrow. right now i have it as an mpg file and i cannot get it to burn to dvd. I've tried using devede and Gnomebaker, but everytime i put it in the dvd player it says disc error.
View 9 Replies View RelatedThis happens every time I try to burn an audio CD burning data CD seems to work fine.I open Brasero, click Audio project, drag a couple of FLAC files into it and try to burn, or in this particular case, create an image.A dialogue pops up where I am supposed to tell it where to put the image. I click Desktop but I don't change the file name (something like brasero.cue or whatever).Then it starts doing things but after a short while I get an error message and I am asked to save the log file, which I did and here it is:
Code:
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1741)
BraseroNormalize called brasero_job_get_action
[code]....
well i tried burning puppy linux through brasero k3b and gnomebaker and this is what i got with brasero as a unknown error
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1799)
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_action
[code]....
I recently switched distributions, I let a guy talk me into switching from Ubuntu 8.04 to Mint 9. Since the switch, I have had a lot of issues that I have mainly worked out myself. I have posted all of it on the Mint forum, but there hasn't been much help available there. I have been told that Mint 9 is based on the newest release of Ubuntu (Lucid Lynx), so I thought I would post over here to see if anyone could help me. The only thing that's still giving me fits are the 3 software programs above. Using k9copy and trying to burn directly to disc, I am getting the error that I took the screenshot of. I then burned it as an iso image and saved it, then tried to use k3b and brasero to burn it that way and got errors with both of those programs.
From k3b:
Devices:
LITE-ON DVDRW LH-20A1S 9L08 (/dev/sr1, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW,
[code]....
I want to burn a mp3 cd but brasero can't burn mp3 cd. How can I do this. If any further software need burn mp3 cd
View 3 Replies View RelatedI've tried a whole bunch of thigns but things keep crashing and i dunno what to do, I'm using FC14 really i just wanna do it all from the terminal but i dunno what commands or yum installs to use ive been trying for a couple days.I have .avi and i wanna burn them to play on a dvd player.
View 2 Replies View RelatedI'm getting following error "There was an error writing to the disc: Unhandled error, aborting"
1. I write click file I want to write to DVD
2. select Write to disk
3. select Write
I'm using Fedora 10.I tried three different brands of DVD+R.I was able to burn same DVD+R few months back in the F10..but I did not try recent months.
Both my cd/dvd drives work fine out of xp so they're connected properly.
I tried to use Brasero to burn an iso to a cd; Brasero responds with the message "Please replace the disc with a supported CD or DVD." But my Sony and Maxell discs should be supported, so what could be causing this message?
Is the bash command cdrecord an alternative to Bresaro? If so then what is the command syntax to burn file.iso to a cd in a cd/dvd drive?
So, I've been using Brasero to burn cds with no problems, but when I try to burn a DVD video, it starts converting the file mpeg-2 then just hangs about half way through. I tried it like 5 times and then moved on to Bombona, which I heard was great. When I start the burn process for a DVD video with Bombono, it just says "DVD-video building broken ffmpeg failure." its driving me nuts, this shouldnt be so complicated. I havent run into others with this problem, so Im assuming Ive just missed something obvoius.
View 9 Replies View RelatedI seem to be having trouble getting the Fedora Live CD onto CD. I have the iso, downloaded as a torrent.
I used: wodim -v -dev=1,0,0 -data /home/pedroski/Downloads/Fedora-15-i686-Live-Desktop/Fedora-15-i686-Live-Desktop.iso
I get no errors;
....a lot of blurb ....then
Performing OPC...
Starting new track at sector: 0
Track 01: 565 of 565 MB written (fifo 100%) [buf 100%] 24.0x.
Track 01: Total bytes read/written: 592445440/592445440 (289280 sectors).
Writing time: 241.472s
Average write speed 16.4x.
Min drive buffer fill was 99%
Fixating...
Fixating time: 21.222s
BURN-Free was never needed.
wodim: fifo had 9332 puts and 9332 gets.
wodim: fifo was 0 times empty and 9141 times full, min fill was 89%.
But when I reinsert the CD, it says 'blank CD inserted' I check properties, it says: 0 bytes used, 0 bytes free.
I have a clean Linux box on which I want to install Fedora 10.I downloaded the 3.6GB ISO file (Fedora-10-i386-DVD) onto my Windows Vista machine, and then installed ISO Recorder, with which I burned the image to a DVD.I was surprised that the image took only about 10 minutes to burn, maybe less.When I then tried to install Fedora 10 on the Linux box from the DVD, after a minute of checking devices and such, it says "Error loading operating system." It goes no further.I'm thinking that the technique I used to burn ISO into the DVD was insufficient. I followed the instructions I found in the ISO readme for burning with the ISO Recorder V2 Power Toy:Obtain and install the ISO Recorder power toy from the
1. In the file manager Explorer, right click on the first Fedora ISO file.2. In the context menu, select Copy image to CD.3. Follow the steps given by the CD Recording Wizard pop-up.4. Repeat for the remaining ISO files.Actually, the ISO Recorder I downloaded said nothing about being a "power toy"--it was ISO Recorder V3.1 - for Windows Vista/Windows 7. But the wizard gave no choice of specifying which in the ISO were boot code vs. package code. It was basically a one-click burn. I just selected Image File (Fedora-10-i386-DVD.iso) and clicked Next. I expected there would be a step for specifying something about boot code. Or, when you install Fedora from
Is there an easy way to burn mp3 on Fedora ? Brasero doesn`t want to and I haven`t found the relevant plugin, and I can`t install Kb3 the Add/Remove even with RPM fusion.
View 6 Replies View RelatedI'm trying to burn a DVD on Fedora 12 using:
- a LG BH08LS20 [ BR burner ] (either SATA or USB)
- a LiteOn LDW-851S [ DVD burner ] (USB)
It's slow (reported speed of 0.3x). The same burner in windohz or Ubuntu gives full speed. The LG is new but the LiteOn burner was working fine on previous Fedora.
Update:so I can burn DVD+Rs fine. I burned Fedora 14 originally on this machine (in F13), although I'll have to check to see what kind of disks I was using.
Here is my posting from unix.stackexchange.com:
I have been trying to burn a few ISOs lately with no success and have certainly used this hardware in the past, so I am not sure what's going on. I am using DVD-R media (tried multiple discs) which appears to be supported by my drive. Here is the error I received in GnomeBaker on Fedora 14 (64):
Code:
Executing 'builtin_dd if=/home/tja/Downloads/Torrents/bodhi_0.1.6.iso of=/dev/sr0 obs=32k seek=0'
:-[ PERFORM OPC failed with SK=2h/CANNOT WRITE MEDIUM - INCOMPATIBLE FORMAT]: Wrong medium type
/dev/sr0: "Current Write Speed" is 1.0x1352KBps.
[code]....
Im wanting to take the DVD version of Fedora and put it on multiple CD's...i currently have no DVD Reader in the machine i want to install Fedora..
View 1 Replies View RelatedI read in the F11 install guide that you can download a install iso image and then do an internet install. Since my F11 DVD hasn't arrived yet; I downloaded that ISO ; and figured it'd be a quicker install anyway, since that way I'd avoid having to download all the updates after the DVD install.I have a USB CD-RW drive attached to my laptop, currently running F7. Almost all of the instructions I see for burning a CD image are for Win users and Win software. I did download Brasero and it's acting flaky; it seems to want to unmount my CDRW drive, even when I'm logged in as root; so it doesn't give me that option to burn to that disk.
I found K3B, but that's for KDE and I'm using Gnome -- is there any good CD burning software (with a link please?) I can use?
I'd like to know, if there is more recent ISO to be download to burn the FC11 Installation DVD. I could get around this Ndvidia graphic installation problem where I am getting a command line system only.
View 10 Replies View RelatedProblem is that I can't burn disk using nero linux as normal user. If I try to do so, it tries to create a .nrg image in the drive rather than burning those files in the disk. But if i run nero as super user then it works okay. If I run it as normal itan't even recognize my burner
View 2 Replies View RelatedI can't burn dvds double layer at all. I managed to ruin 3 DVDs so far (DVD burner from fedora says an error unknown appeared and that burn failed. I tried with Gnomebaker and I got:
[Code]...
If you need more info, tell me what you need (also what command to use) and I will write it. I am wondering whether the problem is with the DVDs or if it's a hardware problem.
I want to make a backup from my drive and burn it to dvdrom.
View 2 Replies View RelatedI am using Oracle Enterprise Linux version 4 update 7. I would like to create and burn iso images via the terminal. Assume I have a folder called movies in directory /root/Desktop.I would like to create a movie.iso image ans burn it using mkisofs and cdrecord.
View 3 Replies View Relatedthis dam program was working fine till I received some updates.why would we update if it just makes things worse the list of thing wrong with this os is growing like not being able to burn an iso without downloading gnome baker. video is just **** and gets worse with every xorg update pulse is like the old cereal commercial snap crackle and pop usb mounting problems to no end never ming trying to burn a Decent dvd now that I vented lol does anyone know of a fix for aramok crashing all the time while playing a song.this only started after I got some updates
I'll tell you one thing the guy who started that thread asking way we have not switched from windows yet should be hung by his gonads for sure like there is ever any chance of replacing windows with errors like this funny this is only a few the list marches on it get s bigger never smaller.The iso burning problem has been around for years now. thats all I can say is there should be a lot of **** flying upstream at xorg pulse and everyone else there work of late sucks as far as bug corrections and proper driver support
I know it 's not fedora is mostly upstream but don't we think its time for someone to say something about this garbage flowing down to us Any how if anyone knows how to get arormoko stop crashing every song. I find they work great when the first come out then the updates hit and it time to dump it for something newer
