I recently installed fedora 9. Everything works fine after install (except sound but thats a different story). When i run updates everything seems to have worked fine but when i reboot afterwards i get to the login screen which works but as soon as i log in it freezes? the only way to restart is to press the power switch...
View 5 Replies
so the problem is that when I try to install anything with Software Center I get this error
Code:
installArchives() failed: Selecting previously deselected package alarm-clock-applet.
(Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading
[code]....
I'm planning to have two installs on the same pc, so I can break / test one and still have a usable system. I've got my partitions setup so I have a separate /home for both installs to share, but how do I share the updates? I'm going to use clonezilla to copy the working (/) partition, but how can I use the updates for both installs. I'm just trying to save downloading twice if possible. Is there a way to copy or use the updates applied in one partition to the other? Does apt save the updates somewhere?
View 1 Replies View RelatedIs it possible to update a Live USB so that way when you use it to install to another computer it will install with the most recent updates? I want to install Lucid to my sister's computer, but it doesn't have internet so once its installed it's never getting updated again.
View 9 Replies View RelatedOpenSuse and rpm. Been using Debian for 7 years, so be gentle. I upgrade KDE 4.3.1 to 4.3.5 through the one-click install. After confirming some actions due to dependencies the install runs and in the end it said it failed to install a bunch of packages. These packages installed just fine and everything works as it should.
I was wondering if this happens more often, as it makes me kinda nervous if the installer warns me? Perhaps even more if it warns about things that aren't correct.
coming from the Windows world recently decided to give Linux a try and with it, she decided to go with KUbuntu. I had her go at it under VMWare so she could have something to fall back on while learning Linux. Problem is after installing KUbuntu we can no longer get back into it as the system locks up while it is trying to boot. All that is seen on the screen is the KUbuntu bootup logo screen and it stays there.
View 1 Replies View RelatedI've just installed Karmic 9.10 to a new 500GB sata in a friends PC and it boots and runs fine; internet and everything just works. Just reinstalled XP-SP3 to old 80GB pata drive in same PC, it boots ok, but has no sound, poor graphics and network is limited to 1394 - no ethernet.
I built this PC about 3 years ago and it had been running XP with SP2 then SP3 installed, and everything worked fine. So over the past day I have installed XP-SP3 (slipstreamed disc) in it 3 times now, then went back and tried XP-SP2 (earlier slipstreamed disc) twice with same result - no ethernet, poor graphics, no sound?
But it all works fine in Karmic?
I ran Karmic's disk utilities (Palimsest) on the old 80GB and it tested fine, no problems at all.
PC comprises Gigabyte M55plus-S3G m/board, AMD 3800+ 2.4Ghz CPU, 1 GB RAM and a 64MB NVidia graphics card (can't recall model)
Is it possible MS built 'crippleware' in to XP, or could there be a hardware problem that Karmic didn't detect (doubt it)
Karmic is going to be the main OS now, so I don't think the loss of XP is a problem, but friend still wanted to be able to boot XP, even though XP is installed in Virtualbox in Karmic (I did this by importing a previously saved XP 'appliance').
Cannot access installation media [URL] (Medium1). Check whether the server is accessible File '/repodata/repomd.xml' not found on medium '[URL]'. This has been happening whenever I try to update the system, install new packages from software.openSUSE.org or from Software Management. I installed openSUSE to test while I repaired another system, I'm more familiar with Debian. I've been checking any offered additional repositories when I install software, this is probably my problem. How do I remove the "Death_Knight" profile from my repros and do I need to install another in it's place?
View 2 Replies View RelatedI am having a problem getting F10 to boot after install.I downloaded the DVD, burned it and installed from it. No errors during the installation but when I go to reboot the system comes up saying:"VolGroup00 not foundUnable to access resume device (/dev/volgroup00/logvol01)Mount: error mounting /dev/root/ on /sysroot as ext3:h file or directory"This is being installed into an AMD Opteron Blade with an Adaptec SC2000 controller card, 4 SCSI disks configured in a RAID 5 array.I gather it's looking at the wrong device for a boot track/loader, but not sure how to fix thisAny ideas? I figured if it found it during install it should find it during boot but that doesn't seem to be the case
View 14 Replies View RelatedI have freshly installed OpenSuse 11.3 and it's ok, but online updates is very slow and keeps failing.
Here is my hw spec:
lspci:
I tried installing Fedora 11 on my i386 using the 6 CD set that I downloaded. Since my system has only 128M of RAM, the text install mode was used. The 1st CD installation seemed to work OK. After 181 out of 181 packages were installed, the system rebooted and did not ask for me to insert the other CDs. now when my system comes up, it is always in text mode.
Q. Is there a command I can use to have the remaining CD's installed so I can install the graphics system?
I am trying to install Fedora 13 on a new system from CD. DISK 1 runs but terminates without using disks 2-5. There is a system I can access as 'root' but I was not prompted to create a unique user or which packages should be installed.How do I complete the process?
View 1 Replies View RelatedI have installed Fedora 12 from the DVD with no apparent issues. It then had me reboot. The color bar goes all the way across the bottom of the screen and Fedora 12 turns white. The screen goes blank and the light is on for the floppy disk. Keyboard does not function and my LCD monitor says no input signal.If I hit esc key while it is trying to boot I see a lot of things being loaded but it is to fast to read what happens last.---------- Post added at 07:31 PM CST ---------- Previous post was at 09:44 AM CST ----------By searching the forum I found that by hitting esc repeatedly I can get to the Grub menu. Once there I edited the command line and added a 3 at the end of the line.I am now logged in as Root.
View 14 Replies View Relatedupgraded from Fedora 10 to 11, had both KDE and Gnome desktops installed under 10 but now upgraded to 11 I get a boot error when truing to boot to KDE and most KDE apps that used to run under Gnome no longer do so
View 1 Replies View RelatedI just did an upgrade and it included the kernel. As time goes by, I will be stuck with a lot of kernels to choose from, and lower disk space. How do I remove an older kernel and everything it's related to it without breaking stuff?
View 8 Replies View RelatedI have a Dell Latitude E5500. For some time I've been installing different distros on it to find which is best suited for my needs. I've tried Ubuntu, Kubuntu, Mandriva, openSuSE, Fedora, and several others. So far, openSuSE takes the cake in terms of what I need, speed, usability, etc. However, I have a soft spot for Fedora and I'm trying so hard to make things work, but I'm kind of at the end of the road unless you guys have some suggestions.
I was in the IRC chat for Fedora asking around, and one user was kind enough to point me in this direction, which made sense as to why I was having issues.
[url]
I was having mixed results, but I had also installed from a Fedora KDE LiveCD. I decided I'd try the full DVD release of Fedora 12 64 bit, so I installed it this evening.
To my disappointment, even the nomodeset parameter does nothing. I get to the blue screen where there's some kind of logo in the center that fills in with white. After it fills in, an F appears. That's where it stops. It just goes no further. Further adding to the confusion is the fact that the fix lists a kernel there, indicating (to me at least) that the kernel listed is when a fix was deployed. I have a newer kernel than that, and despite that I still have these issues.
So needless to say, I'm using my laptop as testing grounds to plop a different distro than Ubuntu on my laptop and 2 servers full time. I really want to make Fedora work, but at the same time I have to use what works for me. Not being able to boot and log in is kind of a big deal. :P
Is there anything I can do or try? I want to keep the OS's I run all the same, so if Fedora 12 bombs out on this laptop, it has no chance on the other servers I plan to run at work. So far openSuSE is running without a hitch but I'd really like to give Fedora 12 a chance....
I'm having trouble installing Fedora 11 using the URL method. When I put in a F11 netinstall CD, or even Disc 1, I press tab on the first option and add "askmethod" to the end of the text. Each time I point the installer to my local FTP and press enter after typing in the FTP url, the installer just hangs there. I've even tried deleting ALL the files from the F11 folder on my FTP server and downloaded ALL the files at:
ftp://ftp.linux.ncsu.edu/pub/fedora/...edora/i386/os/
Still...the same thing.
When I pointed the installer to:
ftp://ftp.linux.ncsu.edu/pub/fedora/...edora/i386/os/
Everything worked fine, albeit slow as it was DL from the NCSU FTP server.
Am I doing something wrong with my FTP server? It is anon, so there is no authentication issues.
Sometimes it does this and other times it does not. It has happened with 2 hard drives. When it formats the partition the bar stops and the mouse pointer graphics stops.
View 3 Replies View RelatedI recently purchased a Quadro FX 4800 and tried to install it on Fedora 10. During the installation, Fedora didn't recognize my new graphics card and began installing the OS in text mode. I stopped the installation and tried to start over, this time I passed the following command: linux resolution=1024x768. I then proceeded with the installation, and again, I was posed with a text mode installation. I continued with the text mode install and when Fedora was done installing, I rebooted and system just locked up.
At this point I was frustrated, so I reinstalled my old 8800 graphics card and started a new install with something that worked in the past. When the install was done, I loaded the latest NVIDIA drivers and the rebooted. I reinstalled my new graphics card (Quadro FX 4800) then powered up my system. I thought everything was good to go and all of a sudden my system flickered and then locked up during the 'Anacron' testing phase. I then rebooted with the "Ctrl+Alt+Del" hotkeys, but my system always locks up during the 'Anacron' testing sequence. I am aware that the Quadro FX 4800 is a few months old, but how can I get it to work in linux? It has gotten so bad, that I had to resort to using MS Vista.
System specs:
Intel Core Duo Quad Core
4 gigs DDR2
SATA RAID 0
Mobo: 680i SLI
800WATT Power Supply
I've tried installing Fedora 12 4 times now, and each time it has stopped at a different spot. This time it loaded 1087 of 1147 packages before it froze. The first time it only loaded 58 packages. The other two times it got a little further. This last time I thought it was going to work because I selected the basic video driver. I thought that was the prolem. This is a very old pc, I think it has an AMD 2200 cpu. Any ideas as to watch I should do to proceed? I've had other versions of Fedora on it, thought I'd go with the latest.
View 6 Replies View RelatedAnyone else having trouble downloading F10 from the direct download or the mirrors?
I can download F9 or F11 just fine but F10 stops at 108mb of the 3.9gb.
I am trying to migrate an XP Laptop to FC 11. I downloaded the latest KDE-Live-x86 image and burned it successfully. When I boot with it however, I get the splash screen and no further.Any option I choose, ncluding the CD diagnostics and Memory Test result in the following:invalid compressed format (err=1)--System HaltedI'm certainly no expert, but am not a linux noob either, yet am at a total loss.Google has yielded many theories, but no solutions. It seems that this error is not exclusive to FC 11 either. Older fedoras, as well as non RPM distros seem to be intermittently effected as well.I have verified the MD5 of the iso, and have verified the cd against the iso. The disc gives the same error in another computer. I cannot access the on-disc diagnostics. XP runs fine.
View 6 Replies View RelatedFor some reason Update Manager is not installing updates as of yesterday.I have it set to check daily and notify if updates are available. It has been working without issues for well over a year now.
Update Manager tells me updates are available and presents the list of security, recommended, and other updates. All are selected to update, but when I select Install Updates in Update Manager it returns with a Reading Package Information window overlaid on the main Update Manager window - building dependency tree then reading state information and dumps me back to the main Update Manager window without performing any update actions.
Fedora 15.
I have been using Fedora 15 since the alpha.
However, since Fedora 15 has been released GA. I haven't been able to get any updates. It saids
Code:
No package marked for update
Here is the results of my yum upgrade code...
I'd like to write a kickstart file that installs available Fedora 14 updates as part of the installation process, much as if I was doing a standard Fedora 14 installation and had enabled the 'updates' repo.
So my question is, is there an easy way to do this? I don't want to have to go down the route of downloading all updated packages and maintaining my own update repo (or indeed, creating a repo with the dependencies listed above).
i just finished a fresh install of F14 and ran yum update, but it comes back with no updates? In the past, i've always had tons of updates after an install. Did the updates happen during installation so that I have a fully updated version?
View 2 Replies View RelatedI have tried many things but none of which seem to work.
Motherboard : N2PAP-LITE
Processor : AMD SEMPRON 2800+ (32 Bit)
Stock FSB Settings : 166/333MHz
Chipset : NVIDIA NFORCE2
This is a really odd problem. It installs under 133/266MHz and runs fine. When it's at 133/266 it reconizes it as AMD ATHLON XP in the BIOS and the Linux Installation. I want to be able to install it using 166/333MHz which is the stock setting of the processor! When I set it to that in the BIOS it reconizes as a AMD SEMPRON 2800+ but will not install Ubuntu 9.10.
This is the error I get if I try to run it from the CD, Install it, or boot from the current installation which I installed it with 133/266MHz. If anyone can please help me figure this out it would be great, im trying to use it as a server and would not like to bottleneck it as it shouldn't be. I get these errors
Code:
check_bugs+0xbb/0xe9
start_kernel+0x2dc/0x2ec
? unknown_bootoption+0x0/0x1ab
i386_start_kernel+0x7c/0x83
Now if you want the whole error list I will type it up.This is a link for the motherboard manual.
[URL]
I burnt a 10.04 LTS disc when it was released and just tried installing on an old Pentium 2 400 MHz with 320 MB and two 10 GB drives. After rebooting, it comes up in text mode with a tty2 login. Did this install the server version only? Is there a command to launch the GUI shell? There were no options during the install to choose GUI or server version and I assumed this was the 32-bit GUI version and the install disc ran we GUI during installation.
View 4 Replies View RelatedI have what I suspect is a frequently encountered problem; indeed it may be an inevitable one. Moreover, I think that I know the solution to the problem. Let me explain.
History:
1. I downloaded f10 from the Fedora site.
2. I burned a DVD.
3. I installed f10 on my laptop using the DVD, and it seems to work correctly.
Symptoms:
4. I ran yum upgrade (as super user), and got the message 'No Packages marked for Update.'
5. I did the same thing for several days and got the same response.
6. I ran yum upgrade a* and got the same response. I thought that the mirror site might balk at large downloads.
Diagnosis:
From what I have read on the web I think the following is what happens.
What I will call the original repository-key system, the one that I downloaded and that is now on my DVD, is limited. It merely concerns the packages that are already on my DVD, and these packages are never changed in the original repository. Therefore, yum is working correctly and will always tell me that 'No Packages marked for Update.'
Cure:
There is a new repository-key system, and with it yum does real updates and upgrades. All I have to do is install the new repository-key system.
THE PROBLEM: ALTHOUGH I HAVE GOOGLED AND SEARCHED A LOT, I CANNOT FIND THE METHOD FOR GETTING AND INSTALLING THE NEW REPOSITORY-KEY SYSTEM IN F10. THERE MUST BE A SIMPLE STANDARDIZED METHOD. WHERE IS IT?
If the above is correct, then anyone who downloads and installs f10 as I did must face this problem.
I just installed Fedora 9 for the first time and have been unable to run updates nor am I able to use the add/remove programs feature. With the system updates the error I receive is within the /urs/share/packages area. I posted this http://amahi.pastebin.com/m131ea1d2 I also receive a different error when I run the Add/Remove programs feature and I receive a similar error. I also tried running these commands from root while logged in as root -- yum clean meatadata
yum -y update but this had no change to the system. I also thought it may have been a RPMFusion issue so I looked at their FAQ and ran the command line to enable RPMFusion and it advises that this package is already installed. I am getting confused by this and not sure where to start so that I dont keep going over the same things with and getting the same results.
