Fedora :: Yum - Install / Remove By Repo?

Nov 2, 2009

I just installed the repo for Go-OO (an OpenOffice derivative). Apparently I didn't go about installing the actual Go-OO program from the repo correctly (i.e., I missed something crucial to actually run it), so I went ahead and reinstalled Open Office proper until I figure out exactly what I'm doing. (N.B: I'm still quite new to Linux and yum.)

Is there a way I can list yum installs strictly by their repository? That is, is there a command I could use to simply list every install that came from the "GoOo" repo? I'm aware that yum list installed returns repo info, but I'd rather be able to list by one repo at a time because (a) I want to very thoroughly clear off everything from the GoOo repo, and (b) it would definitely make it easier in the event that I have to perform any blanket removes in the future.I'm unable to find any single or short string of commands that does this, so I'm guessing either the answer is no or I'm overlooking something ridiculously simple.

View 4 Replies


ADVERTISEMENT

Fedora Installation :: Updates After Install And Repo Lists / Saying Repo Not Found?

Mar 26, 2011

i'm attempting to know and understand fedora more and i will spend probably the next month pouring through all the forums and documents to answer more of my own questions. but there's quite a bit here, so i'd thought i'd ask some noob questions to get me started a little.

ive installed fedora 14 64bit and chosen only kde as the desktop. i selected an extra 2 repos besides the default, fedora 14 -x86_64 and fedora 14-x86_64 -updates. i believe this kernel is installed: 2.6.35.11-83

1. i can only see the 2 extra repo's as being "checked" in kpackagekit, shouldn't i see the default repo also ?

2. i dont have an applet in the system tray indicating the system is up to date, does fedora have this by default ? also after a clean install i ran yum check-update and yum update but the message sayes: "no packages marked for update". i'm not sure if the system is auto-updated during install or not, but with other distros iv tried there is always atleast a few updates needing to be done after install.

3. is kpackagekit the fedora gui package manager ? i dont see any others.

4. i want to upgrade to nvidia drivers, but i think i am missing a non-free repo or something. when i enter: yum install kmod-nvidia xorg-x11-drv-nvidia-libs.i686 xorg-x11-drv-nvidia-libs.x86_64 i get messages stating "no package" i get the same message with yum install nvidia-settings.i also tried this: LANG=C yum --enablerepo=rpmfusion-nonfree info akmod-nvidia but it sayes repo not found.

View 4 Replies View Related

Ubuntu :: How To Remove A Repo

Mar 27, 2011

I entered a PPA though the terminal earlier to install Firefox 4. I spelled part of the repo wrong, and now it is causing some problems. How do I remove the repo. I know how I spelled it, I just need the command to remove it!

View 3 Replies View Related

Debian :: Remove The Repo From Synaptic?

Nov 19, 2010

I added the Liquorix repo to try out the spiffy kernel. It didn't boot so I uninstalled the kernel and went on my way. I'd like to get rid of the repo entry in Synaptic but when I click on "remove" nothing happens. The repo is oddly not in my sources.lst file.

View 1 Replies View Related

Fedora :: Add 32 Bit Repo To 64 Install?

Sep 3, 2010

I know I have seen instructions for this before but I can't find them searching.I have a fresh install of Fedora 13x86_64 and need to temporarily enable 32 bit testing repositories so I can grab 32 bit Wine and Firefox (need flash to work in FF). Can someone please tell me how to add these?

View 2 Replies View Related

Fedora Installation :: Add The Koji Repo But Cannot Find The Rpm To Install It

Mar 3, 2009

I would like to add the koji repo but i can not find the rpm to install it. where I can get it?

View 10 Replies View Related

Fedora Installation :: Edit Yum.conf To Make Yum Install From Local Repo

Mar 14, 2009

I have successfully installed fedora 10 and have rpmfusion in my /home/ directory. i don't know how to edit yum.conf to make yum install from this local repo. i tried once. But when i tried to install vlc i got an error saying some lib****** files are missing and missing dependencies.

View 2 Replies View Related

Fedora :: Software From Updates-testing Repo / Grabbed From Testing Repo When Run Regular Updates?

Jun 22, 2010

I am using Fedora 13 and I have one program (wine) that I need to start grabbing for the updates-testing repo instead of the default repositories in order to get newer versions. I think I can figure out how to add that repository, but I need to know if there are any others I need to disable or any other changes I need to make to my system so that I don't confuse my set up with conflicting updates.

Also, is there anything special I need to do to be sure that only that one program is grabbed from the testing repo when I run regular updates?

View 6 Replies View Related

OpenSUSE :: KDE 4.4 And Updates Repo / Add The KDE Factory Repo To Get Update?

Apr 5, 2010

Will KDE4.4 eventually move into the 11.2 updates or do I have to add the KDE Factory repo to get this update?

View 3 Replies View Related

Fedora :: Fedora/GNOME Didn't Install With Add/Remove Programs Feature?

Feb 20, 2010

Recently installed F12 through the text based install and have got to GNOME gui but when i got to system/administration i only get two options and those are for display changes. Is there some way to install the features i missed out on? namely Add/remove programs which i can't seem to find anywhere

View 3 Replies View Related

OpenSUSE :: 'repo-non-oss': Failed To Cache Repo (139)

Oct 4, 2010

YaST-->Software-->Online Update Getting error: There was an error in the repository initialization. 'repo-non-oss': Failed to cache repo (139). History: - repo2solv.sh "/var/cache/zypp/raw/repo-non-oss" > "/var/cache/zypp/solv/repo-non-oss/solv"

Output of zypper lr:

# | Alias | Name | Enabled | Refresh
--+-----------------------+-----------------------+---------+--------
1 | openSUSE-11.0-Updates | openSUSE-11.0-Updates | Yes | Yes
2 | openSUSE-DVD 11.0 | openSUSE-DVD 11.0 | Yes | No

[code]....

If I disable the repo-non-oss repository the update works fine. The URL I have for the repo-non-oss repository is:

Index of /distribution/11.0/repo/non-oss

This has been going on for over a week. Do I need to use a different URL for the non-oss repository? I live in New York, United States.

View 4 Replies View Related

OpenSUSE Install :: 11.2 - Cannot Find Install Disk (Repo)

Mar 10, 2010

I downloaded OpenSUSE 11.2 x86. Recordered,ran. I selected language (polish) and chose "Install" (originally "instaluj ). Installer booted, but I can't install because "linuxrc" was ran. Linuxrc can't find install disk, repo. I'll install with local DVD-RAM drive.

View 5 Replies View Related

Fedora :: Add/Remove Software -- Can't Install Anything

Aug 8, 2010

Fedora 13, Acer laptop, dual-core AMD Turion, etc.I can call up the Add/Remove software GUI from System/Administration/Add/Remove Software just fine, and I select the packages I wish to install by checking their boxes. (Side issue -- I wanted to mark all of the games, but there seems to be no way to select everything). Looking at the GUI, I clidk Apply, and it goes through a dependency resolution phase. But where's the "Install" button? I found an "Install" menu entry in the selection menu, but it's always greyed out. At the moment I'm installing using yumex, which seems to be working, but is the standard Add/Remove Software really this broken? What am I missing?

View 2 Replies View Related

Fedora Installation :: KDE Install With Add/remove Software?

Mar 14, 2009

I'm trying to install KDE with Add/remove software. There are many files listed(artwork, corefiles, network appplication, workspace...etc) on the right part of the screen when i click on KDE desktop. I installed workspace but i'm unable to see any changes to my dekstop environment. Do i have to install all the files in the list. Please help. My last option would be to go for #yum groupinstall kde-desktop.

View 7 Replies View Related

Fedora :: 'yum Install Whois' And Look For It In Add/Remove Software App?

Dec 1, 2009

I used the Fedora 12 LiveCD to install Fedora on my lappy. Earlier today I tried to use the whois command. Failed both as user and root. Now I tried to 'yum install whois' and look for it in Add/Remove Software app. Nothing...

I have also looked for whois in /bin and /sbin. I am now at the moment out of ideas.

View 4 Replies View Related

Fedora Installation :: Re-install To Remove LV And Use Ext4 Only?

Jul 2, 2010

Thinking of a re-install to remove LV and use Ext4 only. [Root is too large] Can I back up Home from the LV and move it to an external drive. If so will I be able to reinstall and Custom partition so I can use Ext4 and then copy the Home files back to my new Home partition. I have only a small knowledge of LV systems so just want to be carefull.

View 1 Replies View Related

OpenSUSE Install :: VLC Repo Or Single RPM Install?

May 19, 2010

Following the Multi-media and Restricted Format Installation Guide (11.2), I could see that I can avoid installing the VLC repo and execute the rpm command that installs a VLC-related rpm. I prefer executing the command from the terminal instead of installing the repo, because that it feels safer. But I installed suse11.2 64bit, which IMHO makes the libdvdcss version i386 to not be taken to it's full potential. (It's better to install a 64bit version of the libdvdcss package). What is recommended: installing the repo or using the rpm command (all this repo issue is new for me, so naturally I prefer to avoid it, but eventually I'll need to use it...)

View 6 Replies View Related

Fedora :: Remove A Software Installed Using Make Install?

Dec 13, 2009

this is a tar.gz file and i've installed it lately . i wanna take it out now in my system. but dont know so how dyou re move a software installed using ./configure make make install?

View 1 Replies View Related

Fedora :: Cannot Install Windows - Remove Virus Message

Sep 14, 2010

I would like to install Windows as 2. O, but when I insert the original WindowsXP SP1, it loads up the files on the disc, and after that, a blue screen shows up, telling me, i have to remove viruses and the setup breaks down. I also tried it with Windows XP Pro, but the same problem.
Here is a Pic showing the exact Problem, except the upper part: PAGE-FAULT .... isnt there:

View 2 Replies View Related

OpenSUSE Install :: KDE Repo Are You Using For 11.2 Upgrade?

Dec 1, 2009

I have 2 machines running 11.1, but using 2 diff KDE repo sets . . .

On the first, I am using /KDE:/43:/openSUSE_11.1 as listed under the KDE 4.3.x section of the KDE repo's page. The installed KDE version is 4.3.3-3 but yesterday this repo was updated to 4.3.4-1. The corresponding repo for 11.2 now also has 4.3.4-1.

On the second, I am using /KDE:/KDE4:/Factory:/Desktop/openSUSE_11.1. Installed is 4.3.3-128, the most current. This is the same version as in the corresponding 11.2 repo.

IIRC (and I very well may not) for those of us who wanted to go to 4.2 (and later, 4.3) it was first advised to use the /KDE:/KDE4:/Factory set, but later it was advised to switch to the /KDE:/43:/ set.

In any event, since 4.3.3 is officially released by KDE and considered stable while 4.3.4 is not, it would appear the upgrade path should use /KDE:/KDE4:/Factory/11.2 (which is counter-intuitive to me, given the "factory" nomenclature; on the other hand, the "43:" section is not accurately described, so perhaps that's the problem).

View 3 Replies View Related

General :: Install From A Non-repo Site Using Yum?

Oct 11, 2010

its regarding yum. I know yum is used to download from repository sites. And i must configure these repo sites under /etc/yum.repos.d/. But can i install from a non-repo site using yum?

I tried installing dynagen from sourceforge.net with the following link

[root@localhost new]# yum localinstall --nogpgcheck http://sourceforge.net/projects/dyna...fc9.noarch.rpm
Loading "downloadonly" plugin
Loading "installonlyn" plugin

[Code].....

why i am not able to download from the same site using yum ? can yum only download from repo sites ?

View 15 Replies View Related

OpenSUSE :: Removing A Repo - Error "can't Find The Data For The 'problem' Repo"

Nov 20, 2010

I wasn't paying proper attention when adding a repo to yast and need to find the file were the info is saved to delete this. The problem is that whenever i use yast it comes up with an error code saying that it can't find the data for the 'problem' repo. Have tried zypper rm but that comes up with a similar error advising that the data is in a format that was not expected. My thinking is to track the file were the yast repo source details are saved, delete this and then just add the repos that i use back.

View 6 Replies View Related

Fedora :: Install / Remove Packages Written On A Text File?

Sep 9, 2010

I use the show-leaves yum plugin, and sometimes I use that info to remove some unnecessary packages. But that list can be long, so I write them on a text file.

1) Instead of removing packages one by one is there a way to remove all packages written in that text file?

2) Why isn't the output of the show-leaves plugin compatible with the output of "package-cleanup --leaves"?

View 1 Replies View Related

Fedora X86/64bit :: Remove / Install Package Via Yum - Invalid Mode

Jun 2, 2011

Since the Fedoraplus site is down, I alternatively downloaded the FC14 version in hopes that it would work. Instead, I now receive the following error any time I try to remove or install a package via yum:
Code:
[Errno 22] invalid mode ('w') or filename: '//var/lib/yum/rpmdb-indexes/conflicts.tmp'
I'm pretty sure the issue here is a typo in a file (the extra "/" in the path to "conflicts.tmp").

View 4 Replies View Related

OpenSUSE Install :: Adding A PackMan Repo?

Mar 2, 2010

Tried about every repo, listed on Additional package repositories - openSUSE but all give the same permission denied problem on some repom.xml and fail to add the repo.I want to install lame, on suse 11.0.

View 1 Replies View Related

OpenSUSE Install :: Failed To Cache Repo

Apr 23, 2010

I get an error while trying to update the repo.

Index of /repositories/server:/php:/applications/openSUSE_11.1

Code:
│Fehler bei der Initialisierung des Repositorys. ─ │
│ │'openSUSE_11.1_php': [|] Failed to cache repo (4). │ │
│ │Verlauf: │ │

[Code]....

View 1 Replies View Related

OpenSUSE Install :: Repo With Only (symlinks To) New Versions?

Aug 13, 2010

that's it! I got OpenSuse 11.2 and the size of the Repo has exceeded the 4 GB limit. This means that the mirror doesn't fit on my USB-stick anymore, nor would it fit on aDVD-RAM/RW (thus I can't distribute the updates anymore). Yes, there are bigger USB-sticks and BR-RWs, but in the end it is pure insanity!

View 1 Replies View Related

OpenSUSE Install :: How Do I Add Packman Repository As One Repo

Apr 5, 2011

Okay I finally decided to install openSUSE and I have a few questions. First and biggest, how do I add the packman repository as one repo? and will doing so add tumbleweed?

View 9 Replies View Related

OpenSUSE Install :: 11.2 Updates Fail (Repo Not Available)

May 21, 2011

The repository [URL] is not currently (or no longer) valid. The path still exists up to the "Contrib" level, however, there are no files or subdirectories under it. There are also two siblings at the "Contrib" directory level ("Live" and "Update:") and there are no files under them either other than a single subdirectory called "Test" under "Update:". Does anyone know if the updates that used to be available in this repository have moved and, if so, where to? If the repository is no longer required and there is no replacement, I'll simply remove it. I have also noticed issues for several months where the updater applet will go into an "updating" state and never return from it.

View 2 Replies View Related

Ubuntu Installation :: Apt-get Install There Didn't Appear To Be Any Repo's?

Jun 7, 2011

I'm using a system which is based around 9.04 and yes I know this is not the latest and greatest however the softwares in question hasn't been confirmed on the newest version of ubuntu. However I was doing a new build and noticed when I went to do and apt-get install there didn't appear to be any repo's I'm just wondering have the repo's for 9.04 been turned off??

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved