General :: Install From A Non-repo Site Using Yum?
Oct 11, 2010
its regarding yum. I know yum is used to download from repository sites. And i must configure these repo sites under /etc/yum.repos.d/. But can i install from a non-repo site using yum?
I tried installing dynagen from sourceforge.net with the following link
[root@localhost new]# yum localinstall --nogpgcheck http://sourceforge.net/projects/dyna...fc9.noarch.rpm
Loading "downloadonly" plugin
Loading "installonlyn" plugin
[Code].....
why i am not able to download from the same site using yum ? can yum only download from repo sites ?
View 15 Replies
ADVERTISEMENT
Mar 26, 2011
i'm attempting to know and understand fedora more and i will spend probably the next month pouring through all the forums and documents to answer more of my own questions. but there's quite a bit here, so i'd thought i'd ask some noob questions to get me started a little.
ive installed fedora 14 64bit and chosen only kde as the desktop. i selected an extra 2 repos besides the default, fedora 14 -x86_64 and fedora 14-x86_64 -updates. i believe this kernel is installed: 2.6.35.11-83
1. i can only see the 2 extra repo's as being "checked" in kpackagekit, shouldn't i see the default repo also ?
2. i dont have an applet in the system tray indicating the system is up to date, does fedora have this by default ? also after a clean install i ran yum check-update and yum update but the message sayes: "no packages marked for update". i'm not sure if the system is auto-updated during install or not, but with other distros iv tried there is always atleast a few updates needing to be done after install.
3. is kpackagekit the fedora gui package manager ? i dont see any others.
4. i want to upgrade to nvidia drivers, but i think i am missing a non-free repo or something. when i enter: yum install kmod-nvidia xorg-x11-drv-nvidia-libs.i686 xorg-x11-drv-nvidia-libs.x86_64 i get messages stating "no package" i get the same message with yum install nvidia-settings.i also tried this: LANG=C yum --enablerepo=rpmfusion-nonfree info akmod-nvidia but it sayes repo not found.
View 4 Replies
View Related
Jun 25, 2010
I have to ubuntu machine (9.10 and 10.4) with a openvpn tunnel between them.This is the situation:
Code:
NetworkA 192.168.0.0/24
|
UbuntuA br0:192.168.0.3 (openvpn bridge between eth0 and tap0)[code].....
UbuntuA has one only interface etho and there are two openvpn instance: one bridge istance with br0 and another instance with tun0.
UbuntuA is not the gateway for networkA. UbuntuB is the gateway for NetworkB.I need to comunicate between pc on networkB e those on networkA.This is the "ping situation" (no pc tested has an active firewall):
ubuntuA vs ubuntuB: OK
ubuntuB vs ubuntuA: OK
pc on NetworkA vs ubuntuA and ubuntuB: OK[code].....
View 6 Replies
View Related
Jul 27, 2010
I've been on a quest to enable full routing through my openvpn tunnel between my office and the colo. Masquerading will work, however it will throw off anything key based and makes a lot of things just more difficult and vague in general. Is there an easy way to do this via iptables? I tried using quagga hoping it would magically solve my problems, however it does not seem to do my routing for me . I just did a basic static route within zebra...
View 3 Replies
View Related
Mar 25, 2010
I have three locations with a central office connected to two remote locations. At the central office I run on a cisco asa 5505 two site to site vpns. The remote end of the first site is a checkpoint firewall , and the remote end of the second site is racoon on debian. Both sites are up and working. However, where at the first site traffic goes both ways, at the second site it only works from the central office to the remote office.
For example, I can ssh from a host in the central office to a host in the first remote site (through checkpoint firewall,) then ssh back from that host at the remote office to any host in the central office. In contrast, after I ssh from a host in the central office to a host in the second remote office (through racoon), I cannot see the central office hosts (ping the ip address of a central office host, ssh, etc. all fail.) The vpn settings at the central office (the cisco asa 5505) are identical. So it seems to me that some routing magic is missing on the host running racoon at the second remote office. Where would such setting reside? racoon config files? iptables?
View 1 Replies
View Related
Oct 3, 2010
Maybe a site-to-site Ouija board connection.
View 5 Replies
View Related
Apr 5, 2010
Will KDE4.4 eventually move into the 11.2 updates or do I have to add the KDE Factory repo to get this update?
View 3 Replies
View Related
Oct 4, 2010
YaST-->Software-->Online Update Getting error: There was an error in the repository initialization. 'repo-non-oss': Failed to cache repo (139). History: - repo2solv.sh "/var/cache/zypp/raw/repo-non-oss" > "/var/cache/zypp/solv/repo-non-oss/solv"
Output of zypper lr:
# | Alias | Name | Enabled | Refresh
--+-----------------------+-----------------------+---------+--------
1 | openSUSE-11.0-Updates | openSUSE-11.0-Updates | Yes | Yes
2 | openSUSE-DVD 11.0 | openSUSE-DVD 11.0 | Yes | No
[code]....
If I disable the repo-non-oss repository the update works fine. The URL I have for the repo-non-oss repository is:
Index of /distribution/11.0/repo/non-oss
This has been going on for over a week. Do I need to use a different URL for the non-oss repository? I live in New York, United States.
View 4 Replies
View Related
Mar 10, 2010
I downloaded OpenSUSE 11.2 x86. Recordered,ran. I selected language (polish) and chose "Install" (originally "instaluj ). Installer booted, but I can't install because "linuxrc" was ran. Linuxrc can't find install disk, repo. I'll install with local DVD-RAM drive.
View 5 Replies
View Related
May 19, 2010
Following the Multi-media and Restricted Format Installation Guide (11.2), I could see that I can avoid installing the VLC repo and execute the rpm command that installs a VLC-related rpm. I prefer executing the command from the terminal instead of installing the repo, because that it feels safer. But I installed suse11.2 64bit, which IMHO makes the libdvdcss version i386 to not be taken to it's full potential. (It's better to install a 64bit version of the libdvdcss package). What is recommended: installing the repo or using the rpm command (all this repo issue is new for me, so naturally I prefer to avoid it, but eventually I'll need to use it...)
View 6 Replies
View Related
Sep 3, 2010
I know I have seen instructions for this before but I can't find them searching.I have a fresh install of Fedora 13x86_64 and need to temporarily enable 32 bit testing repositories so I can grab 32 bit Wine and Firefox (need flash to work in FF). Can someone please tell me how to add these?
View 2 Replies
View Related
Jun 23, 2010
I downloaded Java from the site itself, and I got a 20mb file named jre-6u20-linux-i586.bin How do I install it?
View 6 Replies
View Related
Feb 18, 2010
In the office there is a local network with samba+openldap PDC. The local domain name is company.net. The company desided to create a corporate Website on a remote hosting and desided that the site's domain should be company.net which is same as local network's domain name. So now it is not possible to reach that corporate website from within the company's local network because, as I guess, bind9 which is installed on above menioned PDC looks for company.net on a local webserver. Is there a possibility to let people from this local network browse the remote site?
View 1 Replies
View Related
Nov 2, 2009
I just installed the repo for Go-OO (an OpenOffice derivative). Apparently I didn't go about installing the actual Go-OO program from the repo correctly (i.e., I missed something crucial to actually run it), so I went ahead and reinstalled Open Office proper until I figure out exactly what I'm doing. (N.B: I'm still quite new to Linux and yum.)
Is there a way I can list yum installs strictly by their repository? That is, is there a command I could use to simply list every install that came from the "GoOo" repo? I'm aware that yum list installed returns repo info, but I'd rather be able to list by one repo at a time because (a) I want to very thoroughly clear off everything from the GoOo repo, and (b) it would definitely make it easier in the event that I have to perform any blanket removes in the future.I'm unable to find any single or short string of commands that does this, so I'm guessing either the answer is no or I'm overlooking something ridiculously simple.
View 4 Replies
View Related
Dec 1, 2009
I have 2 machines running 11.1, but using 2 diff KDE repo sets . . .
On the first, I am using /KDE:/43:/openSUSE_11.1 as listed under the KDE 4.3.x section of the KDE repo's page. The installed KDE version is 4.3.3-3 but yesterday this repo was updated to 4.3.4-1. The corresponding repo for 11.2 now also has 4.3.4-1.
On the second, I am using /KDE:/KDE4:/Factory:/Desktop/openSUSE_11.1. Installed is 4.3.3-128, the most current. This is the same version as in the corresponding 11.2 repo.
IIRC (and I very well may not) for those of us who wanted to go to 4.2 (and later, 4.3) it was first advised to use the /KDE:/KDE4:/Factory set, but later it was advised to switch to the /KDE:/43:/ set.
In any event, since 4.3.3 is officially released by KDE and considered stable while 4.3.4 is not, it would appear the upgrade path should use /KDE:/KDE4:/Factory/11.2 (which is counter-intuitive to me, given the "factory" nomenclature; on the other hand, the "43:" section is not accurately described, so perhaps that's the problem).
View 3 Replies
View Related
Nov 20, 2010
I wasn't paying proper attention when adding a repo to yast and need to find the file were the info is saved to delete this. The problem is that whenever i use yast it comes up with an error code saying that it can't find the data for the 'problem' repo. Have tried zypper rm but that comes up with a similar error advising that the data is in a format that was not expected. My thinking is to track the file were the yast repo source details are saved, delete this and then just add the repos that i use back.
View 6 Replies
View Related
Mar 2, 2010
Tried about every repo, listed on Additional package repositories - openSUSE but all give the same permission denied problem on some repom.xml and fail to add the repo.I want to install lame, on suse 11.0.
View 1 Replies
View Related
Apr 23, 2010
I get an error while trying to update the repo.
Index of /repositories/server:/php:/applications/openSUSE_11.1
Code:
│Fehler bei der Initialisierung des Repositorys. ─ │
│ │'openSUSE_11.1_php': [|] Failed to cache repo (4). │ │
│ │Verlauf: │ │
[Code]....
View 1 Replies
View Related
Aug 13, 2010
that's it! I got OpenSuse 11.2 and the size of the Repo has exceeded the 4 GB limit. This means that the mirror doesn't fit on my USB-stick anymore, nor would it fit on aDVD-RAM/RW (thus I can't distribute the updates anymore). Yes, there are bigger USB-sticks and BR-RWs, but in the end it is pure insanity!
View 1 Replies
View Related
Apr 5, 2011
Okay I finally decided to install openSUSE and I have a few questions. First and biggest, how do I add the packman repository as one repo? and will doing so add tumbleweed?
View 9 Replies
View Related
May 21, 2011
The repository [URL] is not currently (or no longer) valid. The path still exists up to the "Contrib" level, however, there are no files or subdirectories under it. There are also two siblings at the "Contrib" directory level ("Live" and "Update:") and there are no files under them either other than a single subdirectory called "Test" under "Update:". Does anyone know if the updates that used to be available in this repository have moved and, if so, where to? If the repository is no longer required and there is no replacement, I'll simply remove it. I have also noticed issues for several months where the updater applet will go into an "updating" state and never return from it.
View 2 Replies
View Related
Jun 7, 2011
I'm using a system which is based around 9.04 and yes I know this is not the latest and greatest however the softwares in question hasn't been confirmed on the newest version of ubuntu. However I was doing a new build and noticed when I went to do and apt-get install there didn't appear to be any repo's I'm just wondering have the repo's for 9.04 been turned off??
View 6 Replies
View Related
Feb 13, 2011
I have a local repository, and declare also a remote one, I want to tell to apt-get to install a package from a local repo, if it exists. it seems that it begins from the remote. here is my sources:
deb file:/home/CD1 squeeze main
deb file:/home/extra6 /
deb http://ftp.fr.debian.org/debian squeeze main non-free contrib
View 1 Replies
View Related
Oct 22, 2009
In the release anouncement there is mention of adding additional repo's at install time. Is this also possible in the kickstart file?
View 1 Replies
View Related
Oct 7, 2015
I have a GTX 980 and the output of
Code: Select alluname -a is Linux MulletDeathPC 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1+deb8u4 (2015-09-19) x86_64 GNU/Linux
View 5 Replies
View Related
Sep 11, 2010
I am new using SUSE and have one application running. I would like to put the school's new web site that I have runing on localhost on the SUSE box and would appreciate suggestions esp the broad steps involved.Do I install separately Apache, PhP, filezilla, etc. or just install XAMPP?What is the best way to keep the web site updated--ftp or some other way? Teachers want to make routine changes so I have to figure out a procedure.
What is the best way to tie down security besides having good passwords on all Usernames? (I have a 3COM device that I can allow services to specific IP's and define firewall rules. But most incoming would be port 80 which I cannot block.)
View 2 Replies
View Related
Mar 3, 2009
I would like to add the koji repo but i can not find the rpm to install it. where I can get it?
View 10 Replies
View Related
Feb 3, 2010
I just downloaded a file that ends with .Repo, I believe it's a repository file. How should I install this type of file and where/which directory it should be extracted or saved to?
My apology for being a suzee nubbee (Windoz refugee).
View 5 Replies
View Related
Apr 10, 2010
I'm new to opensuse, just installed 11.2 and added the packman repository to the software repositories list, and now when i open the yast software manager there are about a dozen selected packages to install, mostly related to multimedia like ffmpeg ,faac,faad and python-beanutils. I didn't want that, why does it happen? and how can i disable it?
View 5 Replies
View Related
Jun 8, 2011
im trying to do a zypper update for opensuse 11.1 and i get an error from the packman (essentials) repo,
it says that i can't find ./i586/libgupnp-1_0-3-0.13.0-3.2.i586.rpm in Index of /pub/linux/misc/packman/suse/11.1/Essentials
but I've checked and It IS there.I paste the complete error below.
[Code]...
View 9 Replies
View Related
