Tried about every repo, listed on Additional package repositories - openSUSE but all give the same permission denied problem on some repom.xml and fail to add the repo.I want to install lame, on suse 11.0.
View 1 RepliesOkay I finally decided to install openSUSE and I have a few questions. First and biggest, how do I add the packman repository as one repo? and will doing so add tumbleweed?
View 9 Replies View RelatedI'm new to opensuse, just installed 11.2 and added the packman repository to the software repositories list, and now when i open the yast software manager there are about a dozen selected packages to install, mostly related to multimedia like ffmpeg ,faac,faad and python-beanutils. I didn't want that, why does it happen? and how can i disable it?
View 5 Replies View Relatedim trying to do a zypper update for opensuse 11.1 and i get an error from the packman (essentials) repo,
it says that i can't find ./i586/libgupnp-1_0-3-0.13.0-3.2.i586.rpm in Index of /pub/linux/misc/packman/suse/11.1/Essentials
but I've checked and It IS there.I paste the complete error below.
[Code]...
Trying to clean up my system having removed some factory repos so now I have the standard 4, update, oss, non-oss & packman. When updating and switchine to packman I get many Wrong Digest errors and when downloading many NO KEY messages.
What is the significance of the no key message. How can I renew keys from repo sites and what should I do about the Wrong Digest warnings?
With zypper refresh I get this Repository 'openSUSE-11.4-Debug' is up to date. Repository 'openSUSE-11.4-Non-Oss' is up to date. Repository 'openSUSE-11.4-Oss' is up to date. Repository 'openSUSE-11.4-Update' is up to date. Retrieving repository 'libdvdcss' metadata [error] Repository 'libdvdcss' is invalid. Download (curl) error for 'http://opensuse-guide.org/repo/11.4/content': Error code: Connection failed Error message: Couldn't resolve host 'opensuse-guide.org' Retrieving repository 'packman' metadata [error] Repository 'packman' is invalid. Download (curl) error for 'http://packman.inode.at/suse/openSUSE_11.4/content': Error code: Connection failed Error message: Couldn't resolve host 'packman.inode.at'
I was able to add other repos and install applications and upgrades (new install Gnome 11.4 64 bit on friends laptop), and Packman and Video lan are the only repos I can't refresh, any ideas?
well i did a fresh install of opensuse 11.2 64 bit i was trying to install the nvidia repo and packman repo.usually i get this by adding them form community repo's from repo management.but today i am unable to add them. i did not get those repos in the list there.whats might be the problem??
View 2 Replies View RelatedI've just done a clean install of OS 11.2 x86_64, KDE 4.3.1, and got the following message from RPM while installing multimedia support files from Packman using zypper on the command line:
Code:
warning: /var/cache/zypp/packages/ftp.skynet.be-suse/noarch/rpmkey-packman-0.3.8-1.pm.1.1.noarch.rpm: Header V3 DSA signature: NOKEY, key ID 9a795806 Similar messages were coming up while installing other packages through Yast, and I'm wondering what the issue is. All of the messages were about the "key ID" at the end of the example line. (Everything is working so I'm not sure if this is a problem or not.)
I'd like to make a local repo of Packman openSUSE 11.2 x86_64 repo. Should I download all of the following folders? And what will be an approximate size of this download?
Code:
[DIR]i586/19-Feb-2010 12:25 -
[DIR]noarch/ 18-Feb-2010 22:18 -
[DIR]nosrc/ 29-Oct-2009 19:44 -
[DIR]repodata/ 19-Feb-2010 12:32 -
[DIR]src/ 19-Feb-2010 12:25 -
[DIR]suse/ 29-Oct-2009 19:53 -
[DIR]x86_64/ 19-Feb-2010 12:25 -
There are some programs that are missing in the packman repo for openSUSE 11.4 these are:
PACPL
Acetoneiso
furiusisomount
kdvdcreator
soundconverter
[Code]...
I am having a problem downloading the packman.inode.at/suse11.3/repodata/repomd.xml. I get an error: failed to establish connection, connection timed out. I cannot get any updates at all.
View 9 Replies View RelatedThis has been happening for about a week. When I run the updater applet (or when it runs on its own), I get the error: PackageKit Error repo-not-available: File '/repodata/repomd.xml' not found on medium [URL]..
View 7 Replies View Relatedbeen noticing this error when tryiing to iinstall any package from the packman repo:
(Running suse 11.3_x64)"Header V3 DSA/SHA1 Signature, key ID 9a795806: NOKEY" (of course heach ID is different according to each lib)my /repos.d/ look like this:
linux-l0y2:/etc/zypp/repos.d # ls -l
total 32
-rw-r--r-- 1 root root 187 Sep 25 19:28 Updates for openSUSE 11.3 11.3-1.82.repo
[code]...
How can I install Mplayer for openSUSE 11.3 x86_64 The 1 click install from packman is not working and the download install is asking for libopencore-amrnb.so.0 but llibopencore-amrnb0(x86-64) = 0.1.2-1.pm.3.1 is installed
View 9 Replies View RelatedI recently download the new 11.3 suse. I Install from the cd, and choose the update option to make it all auto-.Now I Found out that I have no Mozilla repository, Packman repository, OpenOffice one, as well as others. Then I go the repositories packages screen that repositories aren't displayed. Where can I found them ?What's new on this website that take those repositories apart ?
View 3 Replies View Relatedam running suse 11.2, trying to install packman repo.but when i open software repositories then the software manager comes up i select specify url, then add packman then the url to packman i get an error that the url is wrong. what is the right url to packman. the one i found and was using is "http://packman.mirrors.skynet" is this right or wrong?
View 5 Replies View Relatedi want to add http://carme.pld-linux.org/~arekm/RPMS/ to yum repos for searching packages and installing them.(as ATrpm and dag ,...)
i do this :
#sajad added this:
[carme.pld-linux.org]
name=For VirtualBox
baseurl=http://carme.pld-linux.org/~arekm/RPMS/
[Code]...
Hi, I am trying to add the RPMForge repo by following this guide [URL].. But when I try to verify the package I have downloaded, I get the following message
Quote:[sauro@localhost ~]$ sudo rpm -K rpmforge-release-0.5.2-2.el5.rf.*.rpm error: rpmforge-release-0.5.2-2.el5.rf.*.rpm: open failed: No such file or directory
I want to download an application called deluge, browsing in the website I found that this app is in the experimental repo, and they write the url:
Code:
Packages are in the experimental repo: [URL]So, I went to edit my source.list and I added the next line:
Code:
[URL]
I don't know if this would be usefull to others but since we are using kickstart and then running post install scripts I needed a way to add rpmforge and set the yum-priorities for it correctly via script and here is what I cam up with. If you want to use go ahead (make sure you comment/uncomment the correct repo for your architecture). also not the ex commands are whitespace sensitive. If anyone sees a way to improve this let me know.
View 2 Replies View RelatedI just upgraded from 11.2 to 11.4 and the installation/upgrade worked just perfect. I than followed the instructions in the "New User How To/FAQ", "Multimedia and restricted format" post. I was following the instruction in the 11.4 section. I added the additional repositories as explained. I then was on the section where it talks about going into software management and selecting the "Packman" repository and clicking to "switch systems packages" to the versions in this repository (packman). I than click this link and the "warning" screen appears and I am present with conflict resolution after conflict resolution dialog. It just seems that there are some many conflicts, it just seems wrong and I canceled.
The installation/upgrade appears to have worked just fine. My mail is there, audio and dvd play back worked the first try after the upgrade. I am not clear if this is what I should expect or their is something wrong or if I even need to complete this step for a successfully installation.
i'm attempting to know and understand fedora more and i will spend probably the next month pouring through all the forums and documents to answer more of my own questions. but there's quite a bit here, so i'd thought i'd ask some noob questions to get me started a little.
ive installed fedora 14 64bit and chosen only kde as the desktop. i selected an extra 2 repos besides the default, fedora 14 -x86_64 and fedora 14-x86_64 -updates. i believe this kernel is installed: 2.6.35.11-83
1. i can only see the 2 extra repo's as being "checked" in kpackagekit, shouldn't i see the default repo also ?
2. i dont have an applet in the system tray indicating the system is up to date, does fedora have this by default ? also after a clean install i ran yum check-update and yum update but the message sayes: "no packages marked for update". i'm not sure if the system is auto-updated during install or not, but with other distros iv tried there is always atleast a few updates needing to be done after install.
3. is kpackagekit the fedora gui package manager ? i dont see any others.
4. i want to upgrade to nvidia drivers, but i think i am missing a non-free repo or something. when i enter: yum install kmod-nvidia xorg-x11-drv-nvidia-libs.i686 xorg-x11-drv-nvidia-libs.x86_64 i get messages stating "no package" i get the same message with yum install nvidia-settings.i also tried this: LANG=C yum --enablerepo=rpmfusion-nonfree info akmod-nvidia but it sayes repo not found.
Will KDE4.4 eventually move into the 11.2 updates or do I have to add the KDE Factory repo to get this update?
View 3 Replies View RelatedYaST-->Software-->Online Update Getting error: There was an error in the repository initialization. 'repo-non-oss': Failed to cache repo (139). History: - repo2solv.sh "/var/cache/zypp/raw/repo-non-oss" > "/var/cache/zypp/solv/repo-non-oss/solv"
Output of zypper lr:
# | Alias | Name | Enabled | Refresh
--+-----------------------+-----------------------+---------+--------
1 | openSUSE-11.0-Updates | openSUSE-11.0-Updates | Yes | Yes
2 | openSUSE-DVD 11.0 | openSUSE-DVD 11.0 | Yes | No
[code]....
If I disable the repo-non-oss repository the update works fine. The URL I have for the repo-non-oss repository is:
Index of /distribution/11.0/repo/non-oss
This has been going on for over a week. Do I need to use a different URL for the non-oss repository? I live in New York, United States.
I have 2 machines running 11.1, but using 2 diff KDE repo sets . . .
On the first, I am using /KDE:/43:/openSUSE_11.1 as listed under the KDE 4.3.x section of the KDE repo's page. The installed KDE version is 4.3.3-3 but yesterday this repo was updated to 4.3.4-1. The corresponding repo for 11.2 now also has 4.3.4-1.
On the second, I am using /KDE:/KDE4:/Factory:/Desktop/openSUSE_11.1. Installed is 4.3.3-128, the most current. This is the same version as in the corresponding 11.2 repo.
IIRC (and I very well may not) for those of us who wanted to go to 4.2 (and later, 4.3) it was first advised to use the /KDE:/KDE4:/Factory set, but later it was advised to switch to the /KDE:/43:/ set.
In any event, since 4.3.3 is officially released by KDE and considered stable while 4.3.4 is not, it would appear the upgrade path should use /KDE:/KDE4:/Factory/11.2 (which is counter-intuitive to me, given the "factory" nomenclature; on the other hand, the "43:" section is not accurately described, so perhaps that's the problem).
I downloaded OpenSUSE 11.2 x86. Recordered,ran. I selected language (polish) and chose "Install" (originally "instaluj ). Installer booted, but I can't install because "linuxrc" was ran. Linuxrc can't find install disk, repo. I'll install with local DVD-RAM drive.
View 5 Replies View RelatedI get an error while trying to update the repo.
Index of /repositories/server:/php:/applications/openSUSE_11.1
Code:
│Fehler bei der Initialisierung des Repositorys. ─ │
│ │'openSUSE_11.1_php': [|] Failed to cache repo (4). │ │
│ │Verlauf: │ │
[Code]....
that's it! I got OpenSuse 11.2 and the size of the Repo has exceeded the 4 GB limit. This means that the mirror doesn't fit on my USB-stick anymore, nor would it fit on aDVD-RAM/RW (thus I can't distribute the updates anymore). Yes, there are bigger USB-sticks and BR-RWs, but in the end it is pure insanity!
View 1 Replies View RelatedThe repository [URL] is not currently (or no longer) valid. The path still exists up to the "Contrib" level, however, there are no files or subdirectories under it. There are also two siblings at the "Contrib" directory level ("Live" and "Update:") and there are no files under them either other than a single subdirectory called "Test" under "Update:". Does anyone know if the updates that used to be available in this repository have moved and, if so, where to? If the repository is no longer required and there is no replacement, I'll simply remove it. I have also noticed issues for several months where the updater applet will go into an "updating" state and never return from it.
View 2 Replies View RelatedFollowing the Multi-media and Restricted Format Installation Guide (11.2), I could see that I can avoid installing the VLC repo and execute the rpm command that installs a VLC-related rpm. I prefer executing the command from the terminal instead of installing the repo, because that it feels safer. But I installed suse11.2 64bit, which IMHO makes the libdvdcss version i386 to not be taken to it's full potential. (It's better to install a 64bit version of the libdvdcss package). What is recommended: installing the repo or using the rpm command (all this repo issue is new for me, so naturally I prefer to avoid it, but eventually I'll need to use it...)
View 6 Replies View Related