Just upgraded from Fedora 8 to 13 this morning, the network manager is well, different to say the least. I was able to get my wireless nic to work easily in F8, but I don't think it was detected in the netmanager, so I went to the command line. This is the output from my attemp.
[Code]....
I have configure a UTL modem in fedora 14.
First I confiigure /etc/wvdial.conf file(wvdial is installed)
As:
Then i enter wvdial but i got error as:
I am doing network config of my laptop. I'm new to Fedora, so I'm not sure how it goes ...
I have an Ethernet device (eth0) and a wireless device, wlan0
Status in system->administration->network:
Tab devices:
eth0 : active
wlan0: inactive
Tab Hardware:
eth0: system
wlan0: configured (description: b43)
Double clicking on the wlan0 line gets you to Network Adapters Configuration, where adapter b43 grayed out) is associated with device wlan0. So far, so good (I did all the fwcutter stuff, so I assume this is the result). When I installed the system (from installcd, then update, then install broadcom-wl, ...) I configured it to be started up with network manager, automatically on startup. I managed to get it working exactly once in that session.
Problem is, it doesn't start up and the wireless is not even visible when you click the network manager icon. For that matter, eth0 does not start automatically either, but at least there is a button to start it in network manager. Coming back to the tab devices, clicking on wlan0 allows you to click on the activate button ... but there it says: Cannot activate network device wlan0! b43 device wlan0 does not seem to be present.
This may fall under the "ain't broke don't fix it" category but it's driving me nuts. I've got the Broadcom 4322 wireless adapter in my laptop and it works fine with broadcom-wl driver and kmod. However there is no ifcfg-eth1 file and the card does not show up in system-config-network.
View 2 Replies View RelatedI have b43 wireless. In network Configuration on system->administration the interface it appears as inactive it appers in hardware also as b43 associated to wlan0 but i cannot have access to any wireless network. What i have to do to put this b43 to work.
View 11 Replies View RelatedI have recently installed CentOS 5.3 in my system. I needed some help with the wireless configuration. Actually i have configured it and it shows the wireless name but it doesnt connect to it. in solving the issue.In the /var/log/messages , the following error appears :
Apr 24 20:46:51 localhost NetworkManager: <info> Activation (wlan0) starting connection 'OMWLAM'
Apr 24 20:46:51 localhost NetworkManager: <info> (wlan0): device state change: 3 -> 4
[code]....
I have done a clean install of debian 8.2 (jessie) on a new PC. I am working through some of the issues that were not correctly installed. One of them is the wireless network. On startup, I have a wireless connection. At some point within the first 5-25 minutes of being logged in and doing computer stuff (there is no known action that leads to the reaction), the wireless disconnects from the network and will not reconnect. The network-manager-gnome shows three horizontal dots; the system settings> network shows all of the available networks, the strength of their signal, and the "connecting" circle spins. This behavior occurs with both WPA and insecure networks.
I have followed the guidelines for Debian>WiFi>HowToUse (https://wiki.debian.org/WiFi/HowToUse). Nothing appears amiss when following the Network-Manager>Gnome portion of the instructions. I was going to try the alternate WICD program, but one has to uninstall network-manager to use wicd and synaptic also wants to remove something called "gnome", too-- uninstalling a package with that name makes me uneasy. I have noticed that the installed versions of network-manager (0.9.10.0-7) and network-manager-gnome (0.9.10.0-2) don't exactly agree, but I doubt that that is significant.
root@fayalite:/home/agnewton# iwconfig
eth0 no wireless extensions.
wlan0 IEEE 802.11bgn ESSID:"Mineralogy"
Mode:Managed Frequency:2.472 GHz Access Point: 64:E5:99:2C:A0:7E
Bit Rate=150 Mb/s Tx-Power=20 dBm
Retry short limit:7 RTS thr=2347 B Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=70/70 Signal level=-18 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
[CODE]..
Is there a way to add the wireless network which has a WPA/WPA2/certificate + Peap+MsChap+user+password to /etc/network/interfaces? Am trying to do a bash script that asks user and password and dumps it with addition info such as Peap/Mschapv2/cert into /etc/network/interfaces so it could be automatically activated. Any Ideas? Am on ubuntu 10.04 - using the GUI network-manager it connects without any problem after adding the user/pass/cert/mschapv2/peap. But I wanted to be configured thru command line?
View 1 Replies View RelatedPlease can some one help me to use my USB wireless card D-Link on my laptop.i want to configure it, I am using madriva 2010 my system Acer Aspire 4315.i want to know how to configure it and where to get special driver to download the driver.
View 2 Replies View RelatedI've been following the ubuntu documents on WLAN configuration, but it is far more convoluted and inconsistent with my system than I have patience. Is there an easier way?
View 2 Replies View RelatedI installed Debian today and when i installed it,it got problem with my wireless and it was this "firmware Missing".
So i opened synaptic and installed broadcom drivers for my wireless "broadcom-sta-common" & "broadcom-sta-source" & "firmware-brcm80211".
After I done that and restarted my laptop the wireless was gone from connection option and i cant get it back. My Wireless driver is "Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter" ...
I'm a new Debian user but I've been around Linux for awhile. I wanted to try Debian because I wanted something stable and that I could set up myself from a minimal install. However, I'm having issues with my WiFi connection. I'm running KDE and connected to the network, but I can't access any webpages or ping, for example, google.com. I know the network is working because I'm connected to it on my phone and my wife's Macbook. Here's the output of lspci:
Code: Select all00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
[Code] ....
Here's the output of lsusb:
Code: Select allBus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 004: ID 05ca:18ff Ricoh Co., Ltd
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[Code] ....
I'm using jessie. So far I've tried using firmware-iwlwifi from backports and installing kernel 4.3.0 from the stable repos.
I am running Jessie 8.3 and wireless in Wicd has stopped working for me, displaying "No Wireless Networks Found."
Code: Select allsudo /etc/init.d/wicd restart Restarted wicd
Made sure wlan0 is in wicd preferences.
iwconfig:
Code: Select alleth0Â Â Â no wireless extensions.
wlan0   IEEE 802.11abg ESSID:"Tell My Wifi Love Her"Â
     Mode:Managed Access Point: Not-Associated  Tx-Power=200 dBm Â
     Retry short limit:7  RTS thr:off  Fragment thr:off
     Encryption key:off
     Power Management:off
    Â
lo    no wireless extensions.
For some reason my user account was removed from the netdev group? So I readded it...
Code: Select allekarr@fidelio:~$ sudo gpasswd -a ekarr netdev
Adding user ekarr to group netdev
[code]....
And still, "no wireless networks found" in Wicd.
I'm having trouble getting my wireless card (RNX-G300LX, from Rosewill) working with my Debian install. I had it working at one point in time, but (apparently) something has gone wrong, as it no longer connects. The network I'm trying to connect to uses WPA2. When I try to start up my wireless card as follows:
# ifup wlan0
I get the following response:
wmaster0: unknown hardware address type 801
wmaster0: unkown hardware address type 801
Listening on LPF/wlan0/00:1a:...
Sending on LPF/wlan0/00:1a:...
Sending on Socket/fallback
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 4
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 10
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 15
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 17
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 12
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 3
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
I have set up /etc/network/interfaces as follows:
auto lo
iface lo inet loopback
iface wlan0 inet dhcp
wpa-conf /etc/wpa_supplicant.conf
auto wlan0
and /etc/wpa_supplicant.conf looks like this:
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
ap_scan=1
fast_reauth=1
network={
ssid="apt_102"
scan_ssid=1
key_mgmt=WPA-PSK
psk="mypassword"
proto=WPA2 }
I should also note that running wpa_cli -i wlan0 tells me that it is "trying to associate" with my router, but authentication times out each time.
I don't exactly know what happened but for some reason only the main user has access now to the networkmanager and is able to connect to internet. If I switch to another user, the networkmanager reports no connectivity and the PCMCIA card dies. Does anyone know what to do? It seems like an access feature, related to permissions or something.
I checked but the user is added to the netdev group...
I have very strange problem with kernels 2.6.33 and 2.6.34. I have a wireless card Linksys WMP200 using rt61pci. It connects just fine using WPA2 and works, but in less than 20 minutes I still can reach any machine on my network, but this machine cannot be reached by the others (i.e. before these 20 minutes others can ping me). With default kernel 2.6.26 (Lenny) all is OK. I do not use any firewall. When this happens logs do not change - wpa_supplicant's log is normal (associated), syslog is fine, dmesg shows no errors. Sofar I have tried this:
1. acpi=off as boot parameter
2. both new kernels 2.6.33 and 2.6.34 are compiled with CONFIG_CF80211_DEFAULT_PS disabled
3. iwconfig wlan0 power off
4. Tried ndiswrapper. The device is up and scans fine but wpa2 is not working...
5. Compiled a kernel without ACPI
This is all I did without any luck and I really need the new kernels because I have a quatech device attached to the machine...
My question is rather simple, but i couldn`t find any answer yet i have a debian box connected to the internet through an ad-hoc wireless connection with a win7 box.Could I run a http server on the linux box and access it from the "outside" somehow, since my linux box has a "private network" type IP, ie: 192.168.137.12 ?
View 5 Replies View RelatedFinally took the plunge and decided to give debian a go, not done so before as feared it would be too complicated. Net install went ok. Used to wiki to get me wireless up and running by copying those commands provided most of which made no sense (why the separate kernel image for wireless?).
Anyway seems to have worked so now to the problem I can't connect to my wireless network its not broadcasting so configured it manually the way I do in ubuntu through the net manager, it doesn't connect at all.
The computer networking works fine with a normal static setup, but adding a USB wireless device is not successful. It is my own network so the wpa-ssid and wpa-psk are known to work with Lenny and a previous wireless device.The device is recognized (lsusb) and the driver is confirmed to be in the kernel (lsmod). Here is the iwconfig output:
wlan0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
After typing: ifconfig wlan0 192.168.1.144 up I can ping that address, but it is not working. I have just done a fresh install of Sid so that I could get the 2.6.35 kernel which contains the ath9k_htc driver for the USB wireless device that I am using. The firmware is ar9271.fw but my source of that is questionable because it does not seem readily available. I am temporarily using a PCMCIA wired connection which is what I am using to connect to the computer via telnet. (This is just for convenience so as to avoid getting up all the time.) Here is the ifconfig output:
eth0 Link encap:Ethernet HWaddr 00:40:05:07:d9:11
inet addr:192.168.1.122 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::240:5ff:fe07:d911/64 Scope:Link
[code]...
That file works with the previous USB wireless device under Lenny. Am I doing something wrong or is the driver and firmware just not up to snuff yet?
How can I load packages from the cd? I installed from cd1 which I burned on a desktop, then installed Lenny onto a laptop. Works great, no problems except I have no way of connecting the laptop other than wireless.
I've found the network manager package on the cd, but don't have a clue how to install it. I really need to get the wireless working so I can install package manager, wi-fi radar and some other things. I tried putting the disk back in and thought rescue mode might bring me back to where I could select the individual packages I need, but that didn't work, it just wanted to go through another install. Thought there was a way to select individual packages and add them to the installation.
I've been using Debian since the early days of Lenny being testing as OS on the same Computer. Its a Acer Aspire Notebook with switches for wireless and bluetooth. While booting Lenny my wireless and bluetooth stayed off as long as I didn't switch them on. But since squeeze they get activated ( you can see it by looking at the LED's ) the moment after the grub screen. I now do have to turn bluetooth and wireless off by hand everytime which is quite annoying since I mostly use eth0.
how to disable bluetooth and wireless per default in a way I can simply turn them back on by using the switch?
I am attempting to get my laptop wireless to connect to my router. Wicd sees my router, I enter the known good password, and it reports bad password. Configuring router without wireless security and attempting to connect with wicd without security fails also. Laptop wireless has worked with other another linux distro, and windows.
Environment:Squeeze installed to Dell laptop with wireless: Bus 003 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
Wicd reports that it fails with this text:
2011/01/11 20:06:02 :: Putting interface down
2011/01/11 20:06:02 :: Releasing DHCP leases...
2011/01/11 20:06:02 :: attempting to set hostname with dhclient
2011/01/11 20:06:02 :: using dhcpcd or another supported client may work better
[code]....
I am moving over to debian from ubuntu, and the latest install is to an acer aspire one netbook, the wireless card seems to be working and I can see available networks and even connect to mine (with WPA encryption) via the gnome network manager, however opening a browser or pinging both local and external machines all fail. its as if the OS does not not know to use the card. The wired works fine.
If memory serves the card is identified by lspci as Atheros AR5007.
There is no reference to wlan0 in etc/network/interfaces.
I do not have that system on now and have to leave for work, but I can post any further info from conf files etc as required when i get home tonight... Just thought I'd post a quick description in case I'm missing something obvious...
I'm new here, I hope someone can help me get wireless working on my laptop. This is a Toshiba Satellite Pro C650-EZ1533 (Intel Core i3). The Toshiba site says it has "Atheros Wireless networking (802.11b/g/n)", but does not identify the hardware more specifically.
I installed Debian 6.0 from a netinstall disc, the version including nonfree hardware drivers. In the software selection I went with the defaults: only "Desktop environment", "Laptop" and "Basic system".
Now the GUI looks nice and behaves OK, and the audio, video, ethernet, and optical drive are working. However, I don't know how to configure wireless. It's probably my fault. I was installing and uninstalling file managers, trying to find one I would like better than Nautilus. When I went to uninstall one of them, a message in the package manager recommended using a command like "auto remove" or similar (I did not record it exactly). My understanding at the time was that this would only remove things that were installed because of dependencies but were no longer needed. However, *a lot* of things disappeard from the menus.
Now the only thing about networking in the menus is something about setting up a proxy. There should be some sort of network manager, right? Or an icon on the taskbar, maybe? But I don't know what package to install.
I have a wireless router in my room and when people use their WiFi devices in the living room the signal is very weak and really slow, i have a Debian box in the living room that i would like to use as a wireless repeater. i want it to receive the wireless signal from my router and transmit an AP that resembles the one being transmitted by the router is this possible, and how can it be done
View 9 Replies View RelatedI have a laptop running Debian Squeeze that has one wifi nic - wlan0. The ethernet nic eth0 is faulty.I have configured /etc/network/interfaces to enable wlan0 to access my home wireless LAN. The SSID for this connection is wlan1 and the security used is WPA2.A second SSID configured for the wireless LAN is wlan2 and the security used on this second SSID is WPA.Is it possible to configure wifi networking on this laptop to be able to connect to this wifi network using either SSID - wlan1 or wlan2 - via the laptop's sole network interface, wlan0?
View 12 Replies View RelatedI have an Atheros wireless USB dongle that will connect to my Wifi network just fine in Gnome but in KDE doesn't. I've read through the http://wiki.debian.org/WiFi/HowToUse and have installed all packages and tried all methods noted there but still can't get the wlan0 to work at all in KDE. Is wireless in KDE & Debian Squeeze useless?
View 3 Replies View RelatedThis new USB wireless adapter is not detected by OS. I have tried all possible custom configuration using networkmanager.
View 9 Replies View RelatedHaving difficulties configuring a driver for an Edimax wireless usb [URL]... I have downloaded the driver, and after make clean I am running into problems.When I enter make I get the following.
Code:
make ARCH=i386 CROSS_COMPILE= -C /lib/modules/2.6.32-5-686/build M=/home/conor/rtl8192CU_linux_v2.0.939.20100726 modules
make: *** /lib/modules/2.6.32-5-686/build: No such file or directory. Stop.
make: *** [modules] Error 2
This worked ok on my Ubuntu 10.04 install on my desktop but it does not seems to be working on my Crunchbang 10 latest release on my laptop.
The install auto-config has always worked for me. On this laptop, I needed some firmware, however. I think I've got the firmware installed, but I now need to get the wireless set up. The post-install network configuration tools I've seen thus far are intimidating, unlike the simple during-install config.
View 4 Replies View Related
