Debian Configuration :: Wireless Not Working With Sid And New Device?

Dec 8, 2010

The computer networking works fine with a normal static setup, but adding a USB wireless device is not successful. It is my own network so the wpa-ssid and wpa-psk are known to work with Lenny and a previous wireless device.The device is recognized (lsusb) and the driver is confirmed to be in the kernel (lsmod). Here is the iwconfig output:

wlan0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off

After typing: ifconfig wlan0 192.168.1.144 up I can ping that address, but it is not working. I have just done a fresh install of Sid so that I could get the 2.6.35 kernel which contains the ath9k_htc driver for the USB wireless device that I am using. The firmware is ar9271.fw but my source of that is questionable because it does not seem readily available. I am temporarily using a PCMCIA wired connection which is what I am using to connect to the computer via telnet. (This is just for convenience so as to avoid getting up all the time.) Here is the ifconfig output:

eth0 Link encap:Ethernet HWaddr 00:40:05:07:d9:11
inet addr:192.168.1.122 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::240:5ff:fe07:d911/64 Scope:Link

[code]...

That file works with the previous USB wireless device under Lenny. Am I doing something wrong or is the driver and firmware just not up to snuff yet?

View 5 Replies


ADVERTISEMENT

Debian Configuration :: Setting Wireless Device As A Hotspot

Sep 18, 2015

I have a problem activating the hotspot on my debian 8. The issue is that I can't activate the hotspot to give other devices wifi connection.

I have the correct driver packages from the non-free repositories (firmware-realtek) and this service (hotspot) worked fine on distros like Ubuntu, Mint and Fedora .

I tried hostapd but it didn't work. I'm using cinnamon desktop.

View 0 Replies View Related

Debian Configuration :: Compile A Patched Driver For Use With RTL8187L Wireless Device

May 27, 2010

I have been trying to compile a patched driver for use with my RTL8187L wireless device and get this error.

rm -f ieee80211/Module.symvers 2>/dev/null
rm -f ieee80211/Modules.symvers 2>/dev/null
make -C ieee80211 all

[code].....

View 3 Replies View Related

Debian Configuration :: Using Azio Wireless PCI Adapter (Network Controller: RaLink Device 0701)

May 3, 2010

using this Azio Wireless PCI Adapter[URL] (Network controller: RaLink Device 0701)

View 11 Replies View Related

Debian Configuration :: Wireless Not Working On Squeeze?

Feb 14, 2011

I am moving over to debian from ubuntu, and the latest install is to an acer aspire one netbook, the wireless card seems to be working and I can see available networks and even connect to mine (with WPA encryption) via the gnome network manager, however opening a browser or pinging both local and external machines all fail. its as if the OS does not not know to use the card. The wired works fine.

If memory serves the card is identified by lspci as Atheros AR5007.

There is no reference to wlan0 in etc/network/interfaces.

I do not have that system on now and have to leave for work, but I can post any further info from conf files etc as required when i get home tonight... Just thought I'd post a quick description in case I'm missing something obvious...

View 2 Replies View Related

Debian Configuration :: Ethernet And Wireless Not Working On System

Dec 26, 2015

DEVICES:
atheros AR9485
realtek rtl8111/8168/8411

atheros-firmware and firmware-realtek are installed from repo.

ifconfig does not show the network devices:

ifconfig -a does show them, i ran the commands ifconfig eth1 up and ifconfig wlan1 up, which resulted in them showing when typing ifconfig, however both still are not working.

(ifconfig)Also eth1 is only showing an inet6 address not an inet/ipv4 address and wlan1 doesn't show any.

Checked the bios and noticed that network devices were enabled so i don't think its my bios.

Also ran a SystemRescueCd which i got from here: [URL] .... With this live cd, the networking was working.

Added:
Code: Select allauto eth1
iface eth1 inet dhcp
allow-hotplug eth1

Now I get a net address...

View 1 Replies View Related

Debian Configuration :: Wireless Not Working After Sqeeze Update Of Network?

Feb 9, 2010

I've been enjoying wireless for a long time on Squeeze (iwl3945) with KDE, but the recent network manager update stopped that. I've tried a few things, like going back to /etc/network/interfaces and ifup wlan0 that I use with Lenny, but still not working.

View 14 Replies View Related

Debian Configuration :: Wireless Stops Working After Kernel Upgrade?

Aug 17, 2011

Testing distribution. Installed Linux 3.0 but left 2.6.32 on as backup. When I boot into the old kernel, wireless mostly works OK, but never when I boot with the new kernel.

Results of dmesg|grep wlan0 on 2.6:

[ 22.005102] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 28.196774] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 28.644779] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 30.688053] wlan0: direct probe to AP 00:19:5b:06:9f:ba (try 1)
[ 30.694053] wlan0: direct probe responded

[Code]...

Noticing the Access Point looked like it needed the MAC address, I ran iwconfig wlan0 ap <MACADDRESS> and sometimes it will work, and wicd can connect to the access point. But sometimes the command fails to run.

View 4 Replies View Related

Debian Configuration :: Jessie - Wireless Not Working Dell Inspiron 1525

Sep 19, 2015

I have a problem with my laptop Dell Inspiron 1525 wireless on Jessie Cinnamon.

I have installed the b43 firmware and after that everything seemed working but just for a few seconds.

I have tried to reboot and after that I can't browse the internet just for a few seconds and after that Iceweasel loading and loading and nothing's happening.

I can't surf on the net just with cable but the wifi setup shows everything is okay 95% signal strength and connected.
Also tried reinstall the firmware and reboot and it's all the same after.

I can easily use my wifi with my smartphone too.

View 1 Replies View Related

Ubuntu Networking :: Wireless Device Not Working After Standby / Solve This?

Feb 20, 2010

I'm new to ubuntu and using 9.10. I have installed a dlink wua 2340 wireless adaptor and it is working properly. But after waking up computer by standby mode, wireless connection breaks and the wireless device is not mounted. Therefore I always have to shut down the computer and restart again to establish wireless connection.

View 1 Replies View Related

Debian Configuration :: No Space Left On Device

Mar 15, 2016

Debian Version: 8.3 (Jessie) KDE (although this is NOT a desktop issue)
Basic Hardware:
Gigabyte Motherboard GA-970A-D3P
AMD 8350 CPU (8 cores)
32 GB DDR3 RAM
120GB SSD SATA-6GB/s
750 WD Black SATA-6GB/s

I am getting "Error: No space left on device" regularly during updates or installs, but why. Here is data on the disks, filesystems, etc...

Code: Select all df -h
Filesystem      Size  Used Avail Use% Mounted on
/dev/sda1        81G   27G   50G  35% /
devtmpfs         16G     0   16G   0% /dev
tmpfs            16G   76K   16G   1% /dev/shm
tmpfs            16G   18M   16G   1% /run

[code]...

Seems very doubtful that inodes are the killer.I have googled and followed all the threads, and search these forums and found nothing that fits - every answer there was focused on avaiolable space and inodes..And to make the cheese even more binding, the issue has cropped up on another 8.3 system with far more disk space (larger hard drives) and lots more unused inodes

Code: Select alldf -h
Filesystem                        Size  Used Avail Use% Mounted on
/dev/dm-0                         907G  6.6G  855G   1% /
udev                               10M     0   10M   0% /dev
tmpfs                             995M  9.2M  986M   1% /run
tmpfs                             2.5G   76K  2.5G   1% /dev/shm
tmpfs                             5.0M  4.0K  5.0M   1% /run/lock
tmpfs                             2.5G     0  2.5G   0% /sys/fs/cgroup

[code]...

View 11 Replies View Related

Debian Configuration :: Missing CD / DVD Device In Squeeze

Apr 3, 2010

I've been testing Squeeze to determine whether KDE4 is finally suitable for my primary machine. Everything seems to be working fine except for detection of IDE devices. My CD/DVD drive no longer automounts and the reason seems to be that no device is being created. My Lenny system detects the drive as /dev/hda, but no such device exists in Squeeze. During boot, Squeeze appears to detect the drive as /dev/sr0 (according to dmesg), but in fact that device does not exist either.I'm actually running the Lenny kernel, as I am unable to compile my Ralink wireless driver (rt2860sta) using the Squeeze kernel. Also, for inquiring minds, I use removable HDD drive bays on my systems to simplify testing.

View 9 Replies View Related

Debian Configuration :: USB Device Not Found With Libusb?

Sep 24, 2010

I run a program (findknxusb) to scan for devices on USB, but the device is not found.

The debugging level for libusb is on:
$ ./findknxusb
Possible addresses for KNX USB devices:
libusb_set_debug...
libusb: setting debugging level to 1 (on)
libusb_init...

[Code]....

View 1 Replies View Related

Debian Configuration :: BAR 6: No Parent Found Of For Device?

Oct 5, 2010

I installed Debian Lenny on my HP Laptop - dv6-2120ed. Because i have atheros wireless card i needed to install ath9k which is not supported in 2.6.26 kernel so i compiled it to 2.6.32. Everything is good, but when i boot the new kernel i get "Bar 6: No parent found of for device" for 2 devices - the ethernet LAN card and the sound card. After 1 minute waiting the kernel starts booting and everything works fine (the LAN and the SOUND card too). How can i fix this and what means it exactly?

View 2 Replies View Related

Debian Configuration :: 2.6.32-5 686-bigmem Powernow-k8 No Such Device

Mar 16, 2011

I newly installed Debian 6.0 I choose for the 2.6.32-5 686-bigmem kernel because I have 6Gb of RAM Now I want to use Cool n Quiet When I try to do modprobe powernow-k8 I get a 'no such device' message I have an Athlon64 X2 6000+ cpu. Am I using the correct kernel for this?

View 1 Replies View Related

Debian Configuration :: Wlan0 Device Not Configured?

Aug 3, 2011

I've recently installed Debian. But the wireless network is not working. In Gnome it says "Device not configured" And if i try a ifup it says: root@accroft-msi:/home/accroft# ifup wlan0Internet Systems Consortium DHCP Client 4.1.1-P1Copyright 2004-2010 Internet Systems Consortium.All rights reserved.

Listening on LPF/wlan0/My mac address here
Sending onLPF/wlan0/My mac address here
Sending onSocket/fallback

[code]....

View 13 Replies View Related

Debian Configuration :: Get The Windows One Working Again - Grub Configuration

Oct 3, 2010

I was trying to get the Windows one working again. Here's what fdisk -l reads:

[Code]...

I'll change these or do some grub configurations, if anyone knows what ones can work.

View 1 Replies View Related

Debian Configuration :: Bluetooth Unable To Connect To Any Device

Jun 19, 2015

I've been having a problem with Bluetooth on Debian 8 Jessie i just can't connect to any bluetooth device, i have only tested my smartphone and my bluetooth headphones, i am using blueman manager.After attempting to connect to my bluetooth headphones/smartphone it just disconnects and says "Connection Failed: No such file or directory",i don't know if i have to create a config file or something, the error message doesn't say anything but the error previously mentioned.

View 7 Replies View Related

Debian Configuration :: Static IP - Network Device Not Found

Oct 11, 2010

My os is debian 5.0, netcard is RTL8168D/8111D. I can't use the Static ip, if I setup static ip, output "not found network device", but the network driver have loaded and if I use DHCP mode everything is ok. do you understand my english? What my next steps should be?

View 7 Replies View Related

Debian Configuration :: Safely Removing Mounted USB Device

Jan 7, 2011

I'm not sure if this is a bug in Squeeze beta 2 or if it's something I've overlooked. I have a Maxtor 250 GB external USB drive that I use for backups. It gets auto-mounted fine, always in the same place, and from my normal user account I can write to it, even delete directories on it if I want to. But when, from Gnome, I select the "Safely remove" option, I get an error to the effect that it can't stop the device. The weird thing is that the thing actually *is* unmounted. I've checked the mount point and it's no longer there.Is there some package I maybe should've installed but haven't? I'm not really worried about data loss, since I'm sure the drive wouldn't unmount unless it was properly synched; it's just the error message that bugs me.

View 2 Replies View Related

Debian Configuration :: Squeeze: Grub Uses Device Name Instead Of PartID?

Feb 11, 2011

I'm configuring a machine with Debian 6. I booted from the DVD, took the defaults, and it eventually came up with a Gnome desktop. Everything worked as expected.

I then installed gcc, g++, the Debian kernel source, and built a new kernel with preemptive multitasking turned on. It built clean, I ran "make install" and it put the kernel files in /boot. I rebooted and got a kernel panic error, to the effect that it couldn't find the root filesystem.

/boot/grub/grub.cfg shows

"linux /boot/vmlinuz-2.6.32-5-686 root=UUID=1890437b-5884-4b83-97cf-62d39f63c872 ro single"

for the original install, but the entry for the new kernel has

"linux /boot/vmlinuz-2.6.30DW-preempt root=/dev/sda1 ro quiet"
/etc/fstab has
# / was on /dev/sda1 during installation
"UUID=1890437b-5884-4b83-97cf-62d39f63c872 / ext3 errors=remount-ro 0 1"

I've tried changing the grub entry to UUID, but the new kernel still panics. grub-mkconfig and update-grub just rebuild the split UUID=/sda1 grub.cfg. The new kernel still seems to be looking for /dev/sda1 even after changing grub.

View 5 Replies View Related

Debian Configuration :: Setting Permissions For USB Device On Boot?

Mar 23, 2011

I am trying to figure out what needs to be done to automatically set read/write permissions for everyone for my proprietary USB device on system boot. I have created a udev rules file which changes the permissions for the device when it is connected, but it does not change the permissions when the system is booted with the device already connected. The file looks like this:

SUBSYSTEM=="usb_device", SYSFS{idVendor}=="our vendor id", MODE="0666"

Does something else need to be added to the rules file to make it work when the system boots with the device connected? Is there some other script which needs to be created somewhere?

View 1 Replies View Related

Debian Configuration :: Unable To Persistent Device Naming

Mar 30, 2011

I have a problem defining persistent device naming on a Debian Lenny server.I have:RAID1 controller on the server machine with two SCSI disks.external storage with RAID5. I have / mount on the first partition on the server SCSI disk and /storage mount on the external storage.

I'm experiencing a problem: The system recognizes the system disk (RAID 1), as sda or sdb - randomly.I want: To control the recognition, and tell the system that sda (sda1) will always be the system disk.The motivation: GRUB is configured to work with sda, and when the system disk doesn't, boot process fails, and I end up in the initramfs shell-like interface.

Booting the kernel
.
.
.
mount:mounting /dev on /root/dev failed: No such file or directory
mount:mounting /sys on /root/sys failed: No such file or directory

[code]....

View 6 Replies View Related

Debian Configuration :: Can't Mount Device/partitions With Slim Or Xdm

Jun 28, 2011

I have Debian Testing. I am testing XFCE and LXDE and i want to use display manager other than GDM. I have tried SLIM and XDM but when i use them i can't mount partitions and USB through Thunar, PcMan or Nautilus - i get message that i am not authorized (if i do groups in terminal - adm dialout fax cdrom floppy tape audio dip video plugdev games fuse powerdev netdev lpadmin scanner sambashare). When i install GDM everything works fine. I have installed FUSE, HAL, Udev,...I have tried a lot of stuff from AcchLinux forums but nothing worked really.

View 4 Replies View Related

Debian Configuration :: Change Audio Output Device?

Jul 11, 2011

how do you change the default audio output device if you have multiple sound cards?

View 14 Replies View Related

Debian Configuration :: Permanently Disable The Input-device

Jul 31, 2011

my thinkpad Edge 11 has some problems with the touchpad and the trackpoint, so i want to permanently disable the touchpad, but not the TrackPoint. Both are PS2 devices.

/dev/input/mouse0 --> TouchPad
/dev/input/mouse1 --> TrackPoint

How can i disable the device? In X it does not work with gpointing-device-settings

View 2 Replies View Related

Debian :: Hardware Configuration - No Sound On Audio Device

Jul 14, 2010

Just when I thought my hardware configuring woes were put to an end, I don't have any sound. Here is my lspci list.

Code:
debian:~# lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
And the aplay -l

Code:
debian:~# aplay -l
* List of PLAYBACK Hardware Devices *
card 0: Intel [HDA Intel], device 0: HDA Generic [HDA Generic]
Subdevices: 1/1
Subdevice #0: subdevice #0

View 14 Replies View Related

CentOS 5 Networking :: ZyDAS Virtual Media For 802.11bg - Wireless USB Device Not Working

Jan 12, 2010

I just installed Centos 5.4 on the 2nd partion of my hard drive. I have an ethernet card in my machine (a 3Com Corporation 3c905 100BaseTX [Boomerang] card), but I need to be able to use my wireless USB device I bought from my local phone company (Qwest)...because I will not always have the luxury of plugging in to a hard-wired connection. The USB wireless device works fine in Windows, but I need to be able to use it on my newly installed Centos 5.4 partition.

Here's some info:

[Code]...

View 4 Replies View Related

Debian Configuration :: 7.2.0 - Mount WiFi Device Just After Pushing Firmware

Jun 18, 2015

Working on Debian 7.2.0.

In a specific context I want to automatically make operationnal some USB WiFI devices, deploying automaticaly firwmare (may be not free packages) depending on device ID (vendor ID/product ID). Dev device is a Netgear WNA1000 (driver ath9k, with htc_9271.fw firmware).

I tried to reset the USB bus (modprobe -vr ehci_hcd; modprobe -v ehci_hcd) but it's not really reliable, with sometimes kernel panic.

Is there an "official" way to "mount" the device (the system create the device wlan0) just after deploying the firmware? Maybe using udev ?

View 3 Replies View Related

Debian Configuration :: Udev Script To Run Service On Device Insertion

Jan 24, 2010

I have just bought a DVB-T usb dongle to watch some TV. The software I'm using is vdr, which has to be started through the /etc/init.d/vdr service. I have created a udev script that executes the service on device insertion. It works nicely, however now when I boot up the computer it takes ages to get to desktop. I believe it is because of the WAIT_FOR part. But without this part, the service starts too soon because the usb dongle has been inserted but the firmware has not finished loading. Can someone point out an alternative way to do it? The script is here [URL].

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved