Debian Configuration :: Wireless Does Not Reconnect
Oct 26, 2015
I have done a clean install of debian 8.2 (jessie) on a new PC. I am working through some of the issues that were not correctly installed. One of them is the wireless network. On startup, I have a wireless connection. At some point within the first 5-25 minutes of being logged in and doing computer stuff (there is no known action that leads to the reaction), the wireless disconnects from the network and will not reconnect. The network-manager-gnome shows three horizontal dots; the system settings> network shows all of the available networks, the strength of their signal, and the "connecting" circle spins. This behavior occurs with both WPA and insecure networks.
I have followed the guidelines for Debian>WiFi>HowToUse (https://wiki.debian.org/WiFi/HowToUse). Nothing appears amiss when following the Network-Manager>Gnome portion of the instructions. I was going to try the alternate WICD program, but one has to uninstall network-manager to use wicd and synaptic also wants to remove something called "gnome", too-- uninstalling a package with that name makes me uneasy. I have noticed that the installed versions of network-manager (0.9.10.0-7) and network-manager-gnome (0.9.10.0-2) don't exactly agree, but I doubt that that is significant.
root@fayalite:/home/agnewton# iwconfig
eth0 no wireless extensions.
wlan0 IEEE 802.11bgn ESSID:"Mineralogy"
Mode:Managed Frequency:2.472 GHz Access Point: 64:E5:99:2C:A0:7E
Bit Rate=150 Mb/s Tx-Power=20 dBm
Retry short limit:7 RTS thr=2347 B Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=70/70 Signal level=-18 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
[CODE]..
View 8 Replies
ADVERTISEMENT
Sep 28, 2015
I use Debian Jessie 8.2 and I am using a 3G connection using this modem => [URL] ....
The 3G connection works fine, except after 24 hours the connection drops and I cannot reconnect. If I reboot the computer, the connection will work again.
My guess is that my ISP gives me a new IP address after 24 hours and somehow my system cannot handle it.
How can I reconnect my 3G connection without rebooting?
I have already tried the following commands:
Code: Select allsudo service network-manager restart
Code: Select alldhclient -r eth0
dhclient eth0
Code: Select allsystemctl restart ModemManager
Results of journalctl and grepping my connection name (SFR)
Code: Select allsept. 22 17:58:19 ark1 NetworkManager[512]: <info> Policy set 'SFR Web / Prepaid 1' (eth0) as default for IPv4 routing and DNS.
sept. 23 18:17:07 ark1 NetworkManager[9446]: <info> new connection /etc/NetworkManager/system-connections/SFR Web * Prepaid 1
sept. 23 18:17:08 ark1 NetworkManager[9446]: <info> Auto-activating connection 'SFR Web / Prepaid 1'.
[Code] ....
As you can see sept 22 at time 17:58 is when the computer started up. And roughly 24 hours after it failed to reconnect.
Also I should mention that there is a script to run the command:
Code: Select allsudo service network-manager restart
if the computer cannot ping a server, ie if the connection is lost.
More journalctl info when the system tries to reconnect:
Code: Select allsept. 23 23:52:53 ark1 NetworkManager[9446]: <info> Auto-activating connection 'SFR'.
sept. 23 23:52:53 ark1 NetworkManager[9446]: <info> Activation (ttyUSB0) starting connection 'SFR'
sept. 23 23:52:53 ark1 NetworkManager[9446]: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) scheduled...
sept. 23 23:52:53 ark1 NetworkManager[9446]: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) started...
[Code] ....
View 3 Replies
View Related
Oct 1, 2015
I'm running jessie on virtualbox.
I set staticIP at /etc/network/interfaces.
When I stop/start vm(not restart), dhclient becomes up and ip is assigned by dhcp. Why?
--------------------------------
yoshi@vbox:~$ uname -a
Linux vbox 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1 (2015-05-24) x86_64 GNU/Linux
--------------------------------
yoshi@vbox:~$ cat /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
[Code] ....
View 1 Replies
View Related
Dec 9, 2010
I'm running squeeze testing. I have noticed an issue with the way NetworkManager acts when the wireless connection is dropped. I believe it should automatically reconnect but it immediately puts up a dialog requesting me to enter the wifi password. This dialog stays indefinitely until I intervene and click "OK" (the password from the previous successful connection is still there). I would think that something as basic as wireless networking should not require 24 hour human interaction to stay connected. I have considered a cron job checking the network status and restarting it if necessary, but there is a configuration change or something else I can do to resolve this.
View 3 Replies
View Related
Apr 10, 2010
I have my openSUSE 11.2 connected to router by wifi. I want frequently to access it from my LAN or even Internet, but even so frequent the connection is lost for some reason.
When I am at the box, I can easily do a ifdown/ifup and it will reconnect, but that is a pain when I am not local.
is there some way or maybe a script to check the connection so now and then and if not online then re-connects it automatic ?
View 2 Replies
View Related
May 26, 2011
I'm having a problem with the wireless on my Asus EEEPC 1000HE using Ubuntu 110.04. Digging into the laptop forums, it says there is a problem with wireless on some models of the 1000HE, but it is not the same wireless device and my wireless problem doesn't seem as bad as listed, so I think it's a different problem. But my problem is that if wireless drops for any reason, it will not start working again unless I either reboot the computer or click the wireless icon in the systray, click disconnect so it stops flashing (like it's trying to reconnect) and then suspend my computer or log off and back on. And it only does the latter because I added a file located at /etc/pm/config.d/00sleep_module with the one line that reads SUSPEND_MODULES="rt2800pci" (my wireless driver) So that one line seems to cause wireless to get a fresh connection after suspending (or something. I'm not a very advanced LInux user). I've tried running the command "sudo/etc/init.d/networking restart", but that does nothing for me. I'm not sure what other command to try to see if can fix it.[URL]
View 3 Replies
View Related
Mar 3, 2010
Sometimes I am unable to reconnect to my wireless AP using the same settings that worked the previous day, and that has me stumped. I think it's due to me switching access points (using different authenticatin) since the last connection.
1) After I enter iwconfig/iwpriv commands to connect my wireless usb card (edimax) to my WPA2 network, what process performs the negotiation with the AP, and is there a way to see status debug messages from that process so that I can see if there was a successful negotiation? (so I can see if the password is correct, etc).
2) Is there a way to manually invoke that process to re-attempt to negotiate? Or must I assume that happens automatically with any iwconfig/iwpriv command?
3) Is there a simple command that will erase all iwconfig/iwpriv settings so that I can start over with my iwconfig/iwpriv commands?
View 1 Replies
View Related
Sep 8, 2011
I have problem with my wireless GSM connection , my notebook has built-in Toshiba (in fact Ericsson) F5521gw wireless modem , it is detected and usable by default without installing additional software.Problem is that I can connect flawlessly only once after switching on notebookif I disconnect manually I'm not able to connect again, i have to reboot my computer or another solution which allows me to reconnect is closing and opening lid (putting notebook in suspended state)I'm using Toshiba Tecra r850, openSUSE 11.4 x64 on Gnome 2 DE, using NetworkManager and nm-applet /var/log/messages after using disconnect from nm-applet:
Code:
Sep 8 17:04:39 linux-b5nl pppd[9933]: Terminating on signal 15
Sep 8 17:04:39 linux-b5nl pppd[9933]: Connect time 243.2 minutes.
[code]....
View 5 Replies
View Related
Mar 24, 2011
I am fairly new to linux. I have Ubuntu 10.10 on my Dell Inspiron E1705. While browsing my internet connection suddenly stops working. It says that I am still connected but the internet doesn't work. When I try to disconnect then reconnect it will not connect to the network. To get it to reconnect i have to turn of the wireless card, delete the connection then restart, turn the card back on and reconnect.
View 9 Replies
View Related
Apr 21, 2011
Running 10.10 on Hp dv2000. Approx once a day wireless asks for password authentication but cannot re-connect to wireless network. I verified connection, correct password and modem & router functionality but still will not re-connect. After re-boot problem is resolved for another day or two.
View 5 Replies
View Related
Feb 21, 2010
I've started using slackpkg to keep my system up to date now and after the updates in January my wireless doesn't reconnect after a resume from suspend, I have to connect then kill dhcpcd and restart it. Any ideas what changed there and how I fix it. From the install of 13 until Jan it worked fine.
View 1 Replies
View Related
Sep 6, 2010
I have a hp dv3 2110eg laptop with OpenSuse 11.1 (KDE 3.5.10) and Windows 7 dual boot. My wireless disconnects and connects automatically at random intervals. I do not observe this behaviour when operating my laptop under Windows 7. Following some suggestions given in this forum , I uninstalled networkmanager and installed wicd. However, this does not seem to solve the problem. Given below are the relevant information.
uname -r
Code:
2.6.27.48-0.2-pae
/sbin/lspci
Code:
03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh]
Network Connection
/sbin/lspci -n
Code:
03:00.0 0280: 8086:4237
/sbin/lspci -nnk
Code:
03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5100 AGN [Shiloh]
Network Connection [8086:4237]
Kernel driver in use: iwlagn
Kernel modules: iwlagn
dmesg
Code:
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
iwlagn: Copyright(c) 2003-2008 Intel Corporation
iwlagn 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
iwlagn 0000:03:00.0: setting latency timer to 64
iwlagn: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels
phy0: Selected rate control algorithm 'iwl-agn-rs'
firmware: requesting iwlwifi-5000-1.ucode
The dmesg output shows firmware request (highlighted with red font), but I have already installed the firmware using YAST.
View 2 Replies
View Related
Mar 23, 2010
my wireless will connect to a well known connection but will sometimes drop the connection then tries to reconnect. Sometimes it will reconnect w/o a problem but most times it will fail and when it fails it will refuse to even recognize that same wireless connection.
If by a small chance it does recognize the network then when you click on it, it will ask you again for the password, which is already saved onto the computer. After entering the password it will try to reconnect, then fail.
Only solution is to reboot.
I was wondering if there was an easy temporary fix of just reloading the software that controls the wireless.Such as, my audio doesn't work when I boot. I need to reload the ALSA driver using sudo /sbin/alsa force-reload
Is there something specific to the wireless that I can force-reload and it will start working w/o having me reboot my PC?
View 6 Replies
View Related
Aug 17, 2011
I am running a version of Ubuntu 10.4 with XFCE loaded (actually Qimo, a distribution for kids). I am using a pci wireless card with a broadcom 43XX chipset and WPA2 authentication using the Broadcom STA driver. In an account with privileges I set the auto eth1 (which is what my wireless card comes up as) to connect automatically, and make available to other users.
When I switch to the kid's account, the wireless connects just fine. Then, if the computer is not used for a period of time, the powersavings mode kicks in. When the computer is woken up, the wireless connection does not attempt to reconnect. If you right click on the networking icon it doesn't even show any available connections, even though it can be found by clicking edit connections. The only way I can get it to reconnect is to restart the machine (I will admit that I did not try to restart the networking service, I will try that tonight).
Any ideas? This has been driving me nuts for a few days now. The users during the day are non technical and can't deal with these kind of issues. I can post more details about the setup (as recommended by the sticky post) tonight. I am at work at the moment and can't get to the machine from here - because it has removed itself from the network again.
View 1 Replies
View Related
Jun 1, 2015
On my Raspberry (I know but I could not get any response in raspberry-forums) running raspian I have a problem with a bluetooth-keyboard.
It has bluez 4.99-2 installed and I was able to pair the keyboard and make it trusted and when I run "bluez-test-input connect <address>" I can use it as an input device, but the problem is that when the keyboard goes into a standby-mode after some inactivity the connection is lost and not reestablished. To make it work again I have to run the bluez-test-input command again.
Now when I use the keyboard on my Android-device it also goes into standby but as soon as I start to type again it automatically reestablishes the connection - this is what I would like to achieve on the Rasperry.
My fundamental problem is that I don't know anything about bluetooth really...
I assume that on Android the keyboard initiates a connection when it comes back from sleep but on Raspbian the connection is initiated from the Pi and when the connection is lost the keyboard may try to reconnect but maybe there is no "bluetooth-server" on the Pi to accept the connection but that is just guesswork from someone that really has no clue...
View 0 Replies
View Related
Aug 18, 2015
I installed Debian today and when i installed it,it got problem with my wireless and it was this "firmware Missing".
So i opened synaptic and installed broadcom drivers for my wireless "broadcom-sta-common" & "broadcom-sta-source" & "firmware-brcm80211".
After I done that and restarted my laptop the wireless was gone from connection option and i cant get it back. My Wireless driver is "Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter" ...
View 4 Replies
View Related
Mar 19, 2016
I'm a new Debian user but I've been around Linux for awhile. I wanted to try Debian because I wanted something stable and that I could set up myself from a minimal install. However, I'm having issues with my WiFi connection. I'm running KDE and connected to the network, but I can't access any webpages or ping, for example, google.com. I know the network is working because I'm connected to it on my phone and my wife's Macbook. Here's the output of lspci:
Code: Select all00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
[Code] ....
Here's the output of lsusb:
Code: Select allBus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 004: ID 05ca:18ff Ricoh Co., Ltd
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[Code] ....
I'm using jessie. So far I've tried using firmware-iwlwifi from backports and installing kernel 4.3.0 from the stable repos.
View 4 Replies
View Related
Mar 25, 2016
I am running Jessie 8.3 and wireless in Wicd has stopped working for me, displaying "No Wireless Networks Found."
Code: Select allsudo /etc/init.d/wicd restart Restarted wicd
Made sure wlan0 is in wicd preferences.
iwconfig:
Code: Select alleth0Â Â Â no wireless extensions.
wlan0   IEEE 802.11abg ESSID:"Tell My Wifi Love Her"Â
     Mode:Managed Access Point: Not-Associated  Tx-Power=200 dBm Â
     Retry short limit:7  RTS thr:off  Fragment thr:off
     Encryption key:off
     Power Management:off
    Â
lo    no wireless extensions.
For some reason my user account was removed from the netdev group? So I readded it...
Code: Select allekarr@fidelio:~$ sudo gpasswd -a ekarr netdev
Adding user ekarr to group netdev
[code]....
And still, "no wireless networks found" in Wicd.
View 12 Replies
View Related
Jan 21, 2010
I'm having trouble getting my wireless card (RNX-G300LX, from Rosewill) working with my Debian install. I had it working at one point in time, but (apparently) something has gone wrong, as it no longer connects. The network I'm trying to connect to uses WPA2. When I try to start up my wireless card as follows:
# ifup wlan0
I get the following response:
wmaster0: unknown hardware address type 801
wmaster0: unkown hardware address type 801
Listening on LPF/wlan0/00:1a:...
Sending on LPF/wlan0/00:1a:...
Sending on Socket/fallback
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 4
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 10
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 15
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 17
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 12
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 3
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
I have set up /etc/network/interfaces as follows:
auto lo
iface lo inet loopback
iface wlan0 inet dhcp
wpa-conf /etc/wpa_supplicant.conf
auto wlan0
and /etc/wpa_supplicant.conf looks like this:
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
ap_scan=1
fast_reauth=1
network={
ssid="apt_102"
scan_ssid=1
key_mgmt=WPA-PSK
psk="mypassword"
proto=WPA2 }
I should also note that running wpa_cli -i wlan0 tells me that it is "trying to associate" with my router, but authentication times out each time.
View 8 Replies
View Related
Mar 24, 2010
I don't exactly know what happened but for some reason only the main user has access now to the networkmanager and is able to connect to internet. If I switch to another user, the networkmanager reports no connectivity and the PCMCIA card dies. Does anyone know what to do? It seems like an access feature, related to permissions or something.
I checked but the user is added to the netdev group...
View 1 Replies
View Related
Apr 14, 2010
I have very strange problem with kernels 2.6.33 and 2.6.34. I have a wireless card Linksys WMP200 using rt61pci. It connects just fine using WPA2 and works, but in less than 20 minutes I still can reach any machine on my network, but this machine cannot be reached by the others (i.e. before these 20 minutes others can ping me). With default kernel 2.6.26 (Lenny) all is OK. I do not use any firewall. When this happens logs do not change - wpa_supplicant's log is normal (associated), syslog is fine, dmesg shows no errors. Sofar I have tried this:
1. acpi=off as boot parameter
2. both new kernels 2.6.33 and 2.6.34 are compiled with CONFIG_CF80211_DEFAULT_PS disabled
3. iwconfig wlan0 power off
4. Tried ndiswrapper. The device is up and scans fine but wpa2 is not working...
5. Compiled a kernel without ACPI
This is all I did without any luck and I really need the new kernels because I have a quatech device attached to the machine...
View 10 Replies
View Related
May 7, 2010
My question is rather simple, but i couldn`t find any answer yet i have a debian box connected to the internet through an ad-hoc wireless connection with a win7 box.Could I run a http server on the linux box and access it from the "outside" somehow, since my linux box has a "private network" type IP, ie: 192.168.137.12 ?
View 5 Replies
View Related
Jul 9, 2010
Finally took the plunge and decided to give debian a go, not done so before as feared it would be too complicated. Net install went ok. Used to wiki to get me wireless up and running by copying those commands provided most of which made no sense (why the separate kernel image for wireless?).
Anyway seems to have worked so now to the problem I can't connect to my wireless network its not broadcasting so configured it manually the way I do in ubuntu through the net manager, it doesn't connect at all.
View 1 Replies
View Related
Dec 8, 2010
The computer networking works fine with a normal static setup, but adding a USB wireless device is not successful. It is my own network so the wpa-ssid and wpa-psk are known to work with Lenny and a previous wireless device.The device is recognized (lsusb) and the driver is confirmed to be in the kernel (lsmod). Here is the iwconfig output:
wlan0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
After typing: ifconfig wlan0 192.168.1.144 up I can ping that address, but it is not working. I have just done a fresh install of Sid so that I could get the 2.6.35 kernel which contains the ath9k_htc driver for the USB wireless device that I am using. The firmware is ar9271.fw but my source of that is questionable because it does not seem readily available. I am temporarily using a PCMCIA wired connection which is what I am using to connect to the computer via telnet. (This is just for convenience so as to avoid getting up all the time.) Here is the ifconfig output:
eth0 Link encap:Ethernet HWaddr 00:40:05:07:d9:11
inet addr:192.168.1.122 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::240:5ff:fe07:d911/64 Scope:Link
[code]...
That file works with the previous USB wireless device under Lenny. Am I doing something wrong or is the driver and firmware just not up to snuff yet?
View 5 Replies
View Related
Dec 17, 2010
How can I load packages from the cd? I installed from cd1 which I burned on a desktop, then installed Lenny onto a laptop. Works great, no problems except I have no way of connecting the laptop other than wireless.
I've found the network manager package on the cd, but don't have a clue how to install it. I really need to get the wireless working so I can install package manager, wi-fi radar and some other things. I tried putting the disk back in and thought rescue mode might bring me back to where I could select the individual packages I need, but that didn't work, it just wanted to go through another install. Thought there was a way to select individual packages and add them to the installation.
View 4 Replies
View Related
Dec 22, 2010
I've been using Debian since the early days of Lenny being testing as OS on the same Computer. Its a Acer Aspire Notebook with switches for wireless and bluetooth. While booting Lenny my wireless and bluetooth stayed off as long as I didn't switch them on. But since squeeze they get activated ( you can see it by looking at the LED's ) the moment after the grub screen. I now do have to turn bluetooth and wireless off by hand everytime which is quite annoying since I mostly use eth0.
how to disable bluetooth and wireless per default in a way I can simply turn them back on by using the switch?
View 5 Replies
View Related
Jan 12, 2011
I am attempting to get my laptop wireless to connect to my router. Wicd sees my router, I enter the known good password, and it reports bad password. Configuring router without wireless security and attempting to connect with wicd without security fails also. Laptop wireless has worked with other another linux distro, and windows.
Environment:Squeeze installed to Dell laptop with wireless: Bus 003 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
Wicd reports that it fails with this text:
2011/01/11 20:06:02 :: Putting interface down
2011/01/11 20:06:02 :: Releasing DHCP leases...
2011/01/11 20:06:02 :: attempting to set hostname with dhclient
2011/01/11 20:06:02 :: using dhcpcd or another supported client may work better
[code]....
View 14 Replies
View Related
Feb 14, 2011
I am moving over to debian from ubuntu, and the latest install is to an acer aspire one netbook, the wireless card seems to be working and I can see available networks and even connect to mine (with WPA encryption) via the gnome network manager, however opening a browser or pinging both local and external machines all fail. its as if the OS does not not know to use the card. The wired works fine.
If memory serves the card is identified by lspci as Atheros AR5007.
There is no reference to wlan0 in etc/network/interfaces.
I do not have that system on now and have to leave for work, but I can post any further info from conf files etc as required when i get home tonight... Just thought I'd post a quick description in case I'm missing something obvious...
View 2 Replies
View Related
Feb 27, 2011
I'm new here, I hope someone can help me get wireless working on my laptop. This is a Toshiba Satellite Pro C650-EZ1533 (Intel Core i3). The Toshiba site says it has "Atheros Wireless networking (802.11b/g/n)", but does not identify the hardware more specifically.
I installed Debian 6.0 from a netinstall disc, the version including nonfree hardware drivers. In the software selection I went with the defaults: only "Desktop environment", "Laptop" and "Basic system".
Now the GUI looks nice and behaves OK, and the audio, video, ethernet, and optical drive are working. However, I don't know how to configure wireless. It's probably my fault. I was installing and uninstalling file managers, trying to find one I would like better than Nautilus. When I went to uninstall one of them, a message in the package manager recommended using a command like "auto remove" or similar (I did not record it exactly). My understanding at the time was that this would only remove things that were installed because of dependencies but were no longer needed. However, *a lot* of things disappeard from the menus.
Now the only thing about networking in the menus is something about setting up a proxy. There should be some sort of network manager, right? Or an icon on the taskbar, maybe? But I don't know what package to install.
View 3 Replies
View Related
May 19, 2011
I have a wireless router in my room and when people use their WiFi devices in the living room the signal is very weak and really slow, i have a Debian box in the living room that i would like to use as a wireless repeater. i want it to receive the wireless signal from my router and transmit an AP that resembles the one being transmitted by the router is this possible, and how can it be done
View 9 Replies
View Related
