Debian Configuration :: Can't Connect To Hidden Wireless
Jul 9, 2010
Finally took the plunge and decided to give debian a go, not done so before as feared it would be too complicated. Net install went ok. Used to wiki to get me wireless up and running by copying those commands provided most of which made no sense (why the separate kernel image for wireless?).
Anyway seems to have worked so now to the problem I can't connect to my wireless network its not broadcasting so configured it manually the way I do in ubuntu through the net manager, it doesn't connect at all.
View 1 Replies
ADVERTISEMENT
May 5, 2009
I am having a little trouble connecting to my wireless network. Running Fedora 10 32 bit.I'm trying to connect to a hidden wireless network. I updated the firmware for my driver but apparantly the driver is still not working. Broadcom has a driver from their website for Linux 32 bit systems. Should I attempt to install it? I read a post where the driver is built into the system kernel. If so I would need to blacklist the one of the drivers. Correct?
[justin@justin ~]$ iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wmaster0 Interface doesn't support scanning.
code....
View 7 Replies
View Related
Oct 15, 2010
Trying to convert from Slackware and on a less than 8 yr old gateway installed 10.04. My wireless network is hidden. Logs of the wireless router show dchp requests from xxx.xxx.xxx.45 and the associated offer back. I am assuming xxx.45 is the gateway box.When I open a terminal on the gateway box ifconfig shows the wlan0 to have the proper mac address of the usb wireless stick (intel).
I assume the proper drivers have been loaded as the mac address is recognized; I inputted the proper wep key as an address is offered by the router. Yet no internet connection. Am prepared to use the terminal [as gui screens don't seem to work] to change some file's wireless configuration setting but don't know where to look with Ubuntu.
View 1 Replies
View Related
Nov 13, 2009
Installed 11.2 last night with KDE4. Using "Connect to other network" I could see all the private networks around, including my own.
Mine has an hidden SSID and WPA2-PSK security. Regardless of what I tried I couldn't connect. Both BSSID and password are correct (but there was no other choice than "WPA/WPA2 personal" under security).
So I go to work today and connect to an unsecure network with a visible SSID (and a lower signal quality) without any problems.
View 9 Replies
View Related
Jan 12, 2011
I am attempting to get my laptop wireless to connect to my router. Wicd sees my router, I enter the known good password, and it reports bad password. Configuring router without wireless security and attempting to connect with wicd without security fails also. Laptop wireless has worked with other another linux distro, and windows.
Environment:Squeeze installed to Dell laptop with wireless: Bus 003 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
Wicd reports that it fails with this text:
2011/01/11 20:06:02 :: Putting interface down
2011/01/11 20:06:02 :: Releasing DHCP leases...
2011/01/11 20:06:02 :: attempting to set hostname with dhclient
2011/01/11 20:06:02 :: using dhcpcd or another supported client may work better
[code]....
View 14 Replies
View Related
Mar 11, 2010
How can I connect to a hidden wireless network on Kubuntu? I have 9.10 64bit installed, and have the information for the network (e.g. SSID and key) because I've already connected to it on Windows.
View 3 Replies
View Related
Apr 8, 2010
When I click on the 'connect to hidden wireless network' I get a pop up window. All boxes are selectable with 'new' as the connection. If I click on that drop down and select my ESSID, all the boxes, including the 'connect' box are greyed out. If I enter new network name and the security I can get a connection. If I put down my original ESSID down as the new network name, it works, but if I then look at network preferences, I have two wireless connections with the same name.
View 2 Replies
View Related
May 8, 2010
My network has SSID broadcast turned off, it took me several attempts before the crappy ubuntu network manager figured out that I want to connect to that network automatically.
Yesterday my laptop ran out of battery and entered on hibernation. Now, the crappy network manager can not connect to the network anymore. I tried everything. I restarted, I removed the connection from the list. But after asking to connect to the network, and enter the SSID and the WEP key, it simply won't connect.
The worst part is when I tried to load a pre-defined configuration using "Edit Connections", It displays the connection name, but the "Connect" button is disable.
Is there any way to connect to this hidden network? Or it is not supported.
View 1 Replies
View Related
Jun 9, 2010
I am currently trying to connect to internet through my wireless card, after half day's effort I reached to this point:
/******The following error appears in the dmesg kernel ring buffer output:
ipw2200: ipw2200-bss.fw load failed: Reason -2
ipw2200: Unable to load firmware: -2
ipw2200: failed to register network device
ipw2200: probe of 0000:02:03.0 failed with error -5*********/
I found a solution from Intel website saying that the problem might be: "firmware in wrong location or wrong firmware version". So I proceeded to download the firmware and placed it in /lib/firmware. Also I tried to use menuconfig to enable loading firmware via hot-plug, but I think I have done something wrong when I was configuring the hotplug and firmware.
View 5 Replies
View Related
Oct 30, 2010
My wireless in fresh Squeeze install would not connect automatically. I have to click on the network manager and enter the root password to connect every time I start up. I have "Enable Networking" and "Enable Wireless" checked in the Network Manager.
System>Preferences>StartupApplications>NetworkManager --- checked
NetworkManager>NetworkConnections>Wireless>[mywifinetwork]Edit>AutomaticallyConnect --- checked
There are only 2 lines now in /etc/network/interfacesauto loiface lo inet loopbackWhat should I do to get the NM to look for and connect wireless automatically at start up
View 13 Replies
View Related
Mar 10, 2011
I installed Debian sid recently. I installed the B43 driver and wireless is working just fine at home and elsewhere. I can't connect to the wireless networks at school though. There are two networks, one is unsecured (and you have to enter your login details after connecting - I can't connect at all though), the other is secured. I was previously using Ubuntu, with network manager, and I have all my settings the same for the secured network as I did in Ubuntu. In Ubuntu I can connect to both networks just fine. In Debian I can't.
View 7 Replies
View Related
Jun 23, 2010
have to connect to it manually every time i log in where i'll get prompted for the root password to connect.
things worked fine on F12.
View 3 Replies
View Related
Jan 21, 2010
connect to a hidden wireless network from command prompt? The networks ESSID is "sh0mis"
View 5 Replies
View Related
Apr 17, 2011
I upgraded from lenny to squeeze on a notebook and I can no longer connect to the wireless network. The computer is an LG notebook and the network card is ralink rt2860. I am using Gnome and NetworkManager. The wireless key is WEP hex. It was working fine with lenny till before the upgrade. After the upgrade, the network card stopped working. So, I checked
$ lspci|grep Network
08:00.0 Network controller: RaLink RT2860
Then I reinstalled the driver with apt-get install firmware-ralink wireless-tools Then the network manager tray started working again and saw the network, but cannot connect. It was trying to connect but timed out and kept asking for the password. It is the correct password. I tried deleting the old connection and recreated a new one in the nm. But still does not work.
[Code]...
View 7 Replies
View Related
Jan 24, 2016
I've been searching and trying to correct this problem for nigh on 12 hours. I would like to note that I know that hidden SSID are not necessarily much more secure. I have no permission to change the settings where I am. I'm running Debian Jessie. I have no way to get the server a connection other than the WiFi dongle I'm using. I have installed the correct WPA_Supplicant and Wireless Tools for my architecture/distro/version. I also have solved a sub-problem I had earlier; that the drivers for my WiFi dongle come with the kernel, but the firmware does not. That was remedied.
I can see my SSID in my iwlist scan. (iwlist scan | grep ESSID). My current /etc/network/interfaces looks like this:
Code: Select allauto wlan0
iface wlan0 inet dhcp
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
My current /etc/wpa_supplicant/wpa_supplicant.conf looks like this:
Code: Select allnetwork={
ssid="hundley_1"
psk=HashedPSK
scan_ssid=1
}
The original .conf was created by using wpa_passphrase "hundley_1" PASSWORD >
/etc/wpa_supplicant/wpa_supplicant.conf I know for a fact that the security key is correct. I edited the .conf produced to what it is now.
Usign ifup wlan0 and ifdown wlan0 to start and restart the connection yields an error. The gist of the error is:
NO DHCPOFFERS recieved
View 2 Replies
View Related
Feb 27, 2009
Kernel: 2.6.27.15-170.2.24.fc10.i686
WLAN: Broadcom BCM4311
Problem: I run WPA2 Personal encryption on all my wireless devices. At work we use Cisco WAPs and I can connect flawlessly, simply by entering the password. At home I use Apple's Timemachine, which is basically an Airport Extreme A/B/G/N router.
I go to Network Manager and choose "Connect to Hidden Wireless Network". I enter in the SSID of my home wireless, choose WPA2 Personal, and enter in the password. After ~1 minute Network Manager spits back a window requesting the WEP key.... But I'm not running WEP. This is extremely frustrating. I delete the network and try again... same behaviour. My assumption is that this may be isolated to Airport Extreme network devices but I'd really love to find a fix. Just FYI: I have a MacBook Pro and a system running Vista that connect without a hitch.
View 14 Replies
View Related
Feb 18, 2011
I am using Squeeze and all appears OK at first... I have a DHCP lease, PING to router works, apache servering fine in and outside the network, Epiphany seems to connects to default debian.org only, BUT I cannot connect to any other websites and apt will not connect to any servers. I installed once, tried to fix problem, gave up and reinstalled and still have the same problem.
I unistalled Network Manager thinking that was the problem, but still the same issue. Is there a default firewall blocking certain connections or am I missing something I'm supposed to know about? I installed some non-free firmware in the beginning of install and all worked... and I connected fine when downloading packages during install.
View 4 Replies
View Related
Apr 24, 2009
I have recently installed CentOS 5.3 in my system. I needed some help with the wireless configuration. Actually i have configured it and it shows the wireless name but it doesnt connect to it. in solving the issue.In the /var/log/messages , the following error appears :
Apr 24 20:46:51 localhost NetworkManager: <info> Activation (wlan0) starting connection 'OMWLAM'
Apr 24 20:46:51 localhost NetworkManager: <info> (wlan0): device state change: 3 -> 4
[code]....
View 1 Replies
View Related
Jul 8, 2010
I configure the wireless connection. It works. I restart, and and doesn't automatically even though it asked my if I wanted to use the profile next boot and I said yes.. How do I get it to save? I tried several times.Maybe there's a terminal command? The computer is for a COMPLETE newb who only wants it to browse web, but they're not going to know how to connect every time even if I explain.
View 1 Replies
View Related
Apr 26, 2010
I just wanted to share how I got my wireless network working after spending several hours doing it wrong. It might be helpful to others.My wireless router is set up as a "hidden network". That is, it doesn't broadcast the SSID to prevent hackers. My laptop connected fine under Windows, but not Ubuntu.Lots of posts told me to do stuff in the Network Manager. I tried, but I couldn't find the right settings. It turns out there are *TWO* different programs that control the network settings. I was using the wrong one.
To get to one of them you go to System/Preferences/Network Connections. This program is *NOT* Network Manager. Whatever I tried to set up in this program, I could not get a working connection. The other program, the *REAL* Network Manager, is a different program altogether. You get to it by clicking the network icon at the top right corner of the screen. The problem is you can barely see it if the network is not working. When the network is down, all you can see is a tiny greyed out triangle. That's the thing you have to click. After I clicked this and followed the steps under "Connect to a hidden network".
View 1 Replies
View Related
May 27, 2010
I just installed xubuntu on my desktop. I am using a D-Link USB to connect to the internet wireless. It picks up all of the other Networks around me, but when I try to connect to my hidden network, It will not connect. I made sure the name and password is correct. I really need to connect it to the internet.
View 4 Replies
View Related
Oct 17, 2010
Wireless worked when I broadcasted the SSID, but now when I have hidden it it will not connect.
Edit: Enabled SSID broadcasting again, since hiding it means less security I read.
View 2 Replies
View Related
Jan 7, 2014
I did a netinstall earlier today (latest version, amd64) on my Dell XPS laptop and ended up with a minimal installation because I couldn't connect to the internet. Now I'm trying to get online without a desktop environment.
I have an Intel Centrino 1030, so I downloaded and installed the firmware [URL].... with a usb, then rebooted. My searches have turned up a lot of instructions involving a utility called iwconfig and wpasuppliant, but these are apparently not installed. I don't really know much about it, but my /etc/network/interfaces file looks rather empty:
Code: Select all# The loopback interface
auto lo
iface lo inet loopback
Shouldn't there be something like wlan0 there? The network card does show up with lspci
View 14 Replies
View Related
Jan 8, 2011
I have been using another OS but thought for Ham Radio Debian might be good however my stupidity took over right at the start.Have a live cd and works fine but I don't know how to connect to the Internet.Using DSL.
View 9 Replies
View Related
Mar 13, 2011
I need to connect to a serial port server via /dev/tty.. . The serial port IP addresses are the server's IP address with a particular port # (10001, 10002 etc). The way this seems to work is to create a pseudo-tty and somehow link or configure it to point to the serial server's IP/port #'s.
View 3 Replies
View Related
Apr 9, 2011
I installed testing on my netbook with cd1. and too my suprise it didn't even include something as important as network manager. all i want to do is connect to my wired internet, install network manager, then install my driver for card. if i can just get wired working i will be homefree. the directions for installing my wire3less driver look super simple.
View 4 Replies
View Related
Jun 3, 2011
I am trying to connect to a Debian account through SMB. So far I havn't had any luck and from what I have read online, without Windows 7 registry modifications, I won't get anywhere either. I have tried two main configurations on in the smb.conf. The first method was to use 'security = share' and submit the username and password on the created share. That didn't work. The second method was to use 'security = user' and authenticate to the entire smb server. That didn't work either.
I am unsure what username/password I have to enter. I am using the accounts credentials, but it isn't letting me connect with those. It also wants me to use a domain (something like 'LAPTOPusername' and then password) which I don't understand the relevance. What domain should I use?
When it comes down to it I just want an SMB share that all the Windows 7 computers in my house can access, but still requires a password. Are there any guides available? Please make sure they are up to date with the latest SAMBA and Windows 7 configuration. The ones I have gone over are old and didn't fix my problem. Also if I need to modify the registry then it isn't worth it.
View 6 Replies
View Related
Jun 29, 2010
I've seen other users post this same issue, but can't find anyone who has been able to solve this problem...
I have SSID broadcasts turned off on my wireless router (always a good choice for increased security). Even though I have put a check mark on "Connect Automatically" in my wireless network's configuration under SYSTEM > PREFERENCES > NETWORK CONNECTIONS, it will not connect automatically. I have to click on the network manager icon in the notification area of my desktop, and select "CONNECT TO HIDDEN WIRELESS NETWORK" in order to get online. Network manager does indeed connect automatically to APs that broadcast their SSID. (I don't want to enable SSID broadcasts on my router.)
View 9 Replies
View Related
Apr 23, 2011
I have an Eee PC 1015PEM with Ubuntu 10.10, I believe the wireless card is an rt3090 (though sometimes I see references to rt2860).I had problems getting this to connect to any wireless network originally but eventually was able to fix this by blacklisting a number of modules.However I am still unable to connect to hidden networks and have not been able to find a solution.
View 3 Replies
View Related
Aug 21, 2010
while configuring the yum through proxy i was configures with some address(10.x.x.x). after the proxy address has been changed(172.x.x.x).according to new proxy address i made changes in all locations in my system. but when i am trying to download through command line still it is trying to connect old proxy address(10.x.x.x). finally i come to know that, still some location old proxy address (10.x.x.x).is there.
how to troubleshoot this issue.(how to find the location) i was try to debug find the output below DEBUG output created by Wget 1.11.4 Red Hat modified on linux-gnu.
[Code].....
View 1 Replies
View Related
