I am using Ubuntu 10.10 x64 on a Dell Studio XPS
I am unable to get JACK to make any sound from any of the applications which plug into it.
Code:
lspci:
me@TheComputer:~/Desktop$ lspci
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
me@TheComputer:~/Desktop$ cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
[Code]....
I have a new install of 10.10 on a Toshiba Satellite with a dual boot of win7. I installed 10.10 and on the first night I swore the headphone jack sent sound to my external speakers (may of been plugged in during install). Then the next day I couldn't get any sound out of the jack. Sound kept coming out of my internal speakers. In win7 the jack worked normally. In Ubuntu I have checked sound preferences and my alsa mixer. There is no listing for a headphone jack (so it is not muted).
[Code]...
I finally ditched PulseAudio and set up my system with a realtime kernel. I'm redirecting ALSA over JACK. The good: - Awesome, I can get <5ms latency without any xruns! (although 23.2 msec as described below is just fine for me) The bad: - I'm a long-time linux audio user, but have got some minor issues which spoil the fun.
1. Without pulseaudio, the indicator applet refuses to show a volume control applet. The old gnome-volume-control-applet (the one with tooltip!) loads but doesn't show in the gnome-panel. Although I can set the volume with envy24control, it's not quite as practical as using the scrollwheel! Any way to fix this?
2. When I launching any application (such as a terminal) from the gnome-panel, a new JACK connection is created, but not cleaned up after closing the application. As a result, the QJackCtl connection list is flooded with alsa-jack.jackP.8528.xx connections (where 8528 is the process ID of gnome-panel). The jack_lsp command line program shows the same (added spaces after every : to get around the smiley filter):
[Code].....
It automagically started working after the latest updates. same command. Which at the same relieves
View 2 Replies View RelatedI'm at the tail end of my upgrade from Lenny to Squeeze and I think this sound issue is the last one I have.
As usual I've tried hunting for some answers but it gets very confusing when people are using KDE or PulseAudio or Ubuntu or slightly different configuration to what I have.
My config:
Debian Squeeze 2.6.32
Alsa (just because I was using that in Lenny and it was working, no other reason)
Gnome
Rhythmbox
Skype
Skype is pretty good - it has the sound configuration built in, so I say ring the speakers and it does. I say talk to the headset and it does. Rhythmbox is my music player (again just because I was using it under Lenny) however it only wants to play through the headset. I can't seem to get it to play to the speakers attached to the rear port.
Summary of some settings (transposed manually)
# aplay -l
*** List of PLAYBACK hardware devices ***
card 0: Headset (Logitech) device 0: usb audio
subdevice 0/1
card 1: Intel HDA device 0: ALC883 Analog
[Code].....
After installing I was not able to get many of the audio programmes to work. After some reading, I realised that this was probably due to jack not starting.
I was unable to get jack to start normally but have been able to get it started with the playback only option selected. Programmes that use jack now work, however there is no sound once jack has been started. The sound does work in other programs when jack is not started. Strangely, I only have to open qjackctl for the sound to stop, and jack is not even started. Initially I thought these problems were due to my sound card not being supported, but I believe that alsa support was added for the via 1708 codec at some point. I found that support had been added in a document showing the changes between alsa versions; however I cannot find the exact model listed as a supported sound card on the alsa site.
I believe that altering jack settings could fix the problem, as i have been able to get audio to work in hydrogen by selecting plughw:0 but there is still no sound in other programs. I have tried altering many other settings but to no avail, however I do not really understand the meaning of the settings that i am adjusting.
Does anyone know what settings to adjust or know something else that might fix this problem so that sound works once jack has been started?
Also, would programmes that use jack such as audacity, hydrogen, and ardour work with pulseaudio as the main sound server if I were to install normal ubuntu - it might be worth seeing if my soundcard works with the puleaudio sound server
if this helps, here is the error message received when jack does not start when the normal duplex option is selected.
21:24:04.867 Patchbay deactivated.
21:24:04.868 Statistics reset.
21:24:04.886 ALSA connection change.
Cannot connect to server socket err = Connection refused
[Code].....
also, when i open alsamixer in the terminal for some reason the headphone part is greyed out, even when the sound is working before qjackctl is opened.
I recently bought a set of 2.1 speakers, all is fine. I like to listen to my DAB radio through them. When I boot up, (runlevel 3), sound is there via the mic/line-in jack, but as soon as KDE starts, the sound cuts. I can get it back by:~>alsamixerand then F6 and then scroll to mic, switching to ON and slider up to full and then mic boost up to 65% or so.Can I tell something in KDE to default to mic/line-in on?kmix does not give the full picture I see in other's posts, like here:ImageShack® - Online Photo and Video Hostingjust a single slider under each tab, like this:
View 9 Replies View RelatedI have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.
View 4 Replies View RelatedI'm running Kubuntu 9.10 X64, and am using ALSA for my sound. I have no trouble with sound: VLC, Adobe's Flash plugin, Java, etc. all work properly. When I run the Gnash standalone player, sound does not work at all.
When I run Gnash in a terminal, I get this:
Quote:
I just realize that when I plug in my headphones in my laptop, the sound in the laptop's speakers continues to play and I have no sound on the headphones. This is the output of the 'sudo lshw -C sound' on my system:
*-multimedia UNCLAIMED
description: Audio device
product: nVidia Corporation
vendor: nVidia Corporation
physical id: 0.1
bus info: pci@0000:01:00.1
version: a1
width: 32 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: latency=0
resources: memory:d3000000-d3003fff .....
I can not get sound to exit from my headphone jack, whenever I plug it in, no sounds come out. Notebook model is Acer 3820TG. By the way, I've tried adding the line for HDA Intel with udo gedit /etc/modprobe.d/alsa-base.conf
[code]...
I have a little issue.
I have netbook Asus EEE PC 1001PX (he's got only one jack for headphone and mic, i dont' know how this could work... but anyway)
I have no sound from headphone, from speakers is ok.
I've already edit /etc/modprobe.d/alsa-base.conf and insert the options snd-hda-intel model=asus at the bottom, still nothing.
I've try also to uninstal linux-backports-wireless... and still nothing.
Card: Intel HDA.
Jack runs, but I can't get sound to play through it. Another thing that happens is when I launch jack, all audio in the system, whether its connected to jack or not, goes off. There are no errors or anything in the messages window. And I checked to see if it was connected to the correct interface. I have a mac mini and I run ppc lucid lynx. The system does detect my hardware, and its not muted. All I want to do is use MusE. Is there maybe anyway to run MusE without jack?
View 3 Replies View RelatedI am trying to set my computer up to do sound sequencing. I want to plug my MIDI keyboard in and record with a sequencer. Running 10.04, was following a tutorial on installing JACK, and my audio stopped working. Since then, I've gone through all guides I can find, some advising an upgrade of ALSA, some saying to use OCC. I've tried both, but nothing seems to work.
I suspect it may have something to do with libjack0. I could not install jackd because it claimed libjack0 to be the wrong version, and for some reason I couldn't upgrade. So I uninstalled libjack0, then installed jackd, which automatically included the version of libjack0 it wanted. After that, I could get the JACK server running, but the computer had no sound.
I will post whatever logs or information necessary to troubleshoot, but I don't know exactly how or what to post. If you need logs, please tell me how to get them.
I have a Dell Vostro 320 running Ubuntu 10.10. I can get sound through the onboard speakers but when I plug headphones into the jack, the onboard speakers mute (correct behaviour), but no sound comes from the headphones (incorrect behaviour). The headphones do work with other sound sources.I have made sure all the alsa drivers are up to date and correct and the system is seeing the sound card OK according to aplay -l:
The alsamixer run from the command line or Gnome shows "Master", "PCM", "Beep" and "Capture" all normal with nothing muted. The alsa-base.conf file has the following as the last line as per various posts that seem to have a fix for this problem:options snd-hda-intel model=dell-vostro position_fix=0 enable=yes.
I had sound. My sound stops working after install jack. Jack server starts well, and the jack log shows no error messages. If I run Muse, it recognizes jack and show no error messages, but I have no sound output. Where should I start investigating? I'm using Karmic.
View 1 Replies View RelatedI'm dual booting Windows 7 and Ubuntu 9.10 64bit on a new HP laptop.In Ubuntu, I'm not getting any sound from the headphone jack. I've tried a couple of different solutions but haven't had much luck. Sound works through the internal speakers in both Windows and Ubuntu. Sound through the headphone jack works only in Windows.The sound card is a IDT 92HD75B3X5.This is a fresh 9.10 install, save for the changes mentioned below.I've attempted to use the gnome-alsa fix that's mentioned in a few threads, but I don't have a "Headphone" tab to "un-mute".I've attempted to recompile the driver as mentioned in this thread
View 9 Replies View RelatedI upgraded to Ubuntu 9.10 recently to find that my computer will not play mp3 files in Rythmbox, Amarok, or Kaffeine media players. All of the FLAC files I have ripped from CDs work, but no mp3 files work. I have downloaded and installed the ubuntu restricted codecs from Synaptic as well as the codecs prompted by Rythmbox rebooted, and still no result.Like I said, the .FLACs play fine.On another note, no sound is being transmitted to my earbuds. The only sound will come from the laptop speakers.
View 4 Replies View RelatedI'm a complete Linux newbie - only installed it yesterday, and have spent hours trying to get my M-Audio Firewire Solo sound card to work. I can hear nothing at all. I know nothing of Linux, but am willing to learn. While I learn though, it would be nice to listen to a little Hall & Oates. I've got to the stage where the error messages I'm receiving don't bring up any results on Google. Here's what things look like (watch out, big pic):
Those sample rate errors appear in the terminal when I start ffado-mixer. I'm running JACK with everything set as I think it's supposed to be, except that 'Realtime' is unchecked.If I start JACK running with 'Realtime' checked, it tries to launch and fails, saying "JACK is running in realtime mode, but you are not allowed to use realtime scheduling. After applying these changes, please re-login in order for them to take effect". I don't know what more it wants me to do - i've already added
@audio � rtprio 100
@audio - nice -10
@audio � memlock unlimited
to /etc/security/limits.conf, and selected the 2.6.31-11-rt kernel on GRUB bootup. I'm a member of 'audio' and 'disk' groups like'm supposed to be. Have I not got the connections right in JACK? Have I got some sample rate settings wrong somewhere?I'm not even bothered about low latency with the realtime kernel right now, I just want to hear some sound
I am running Ubuntu Studio 9.10 and have been using wineasio to connect Reaper to JACK successfully for a while now. However, I am now experimenting with using multiple soundcards in JACK (via alsa_in). My main card is an M-audio delta 44 (4 inputs) and I want to route the inputs from my onboard soundcard into Reaper using JACK. No problem so far.. This all works with alsa_in. But the problem is I can't get reaper to start with more than 4 in/out.
With wineasio, there is an environment variable "ASIO_INPUTS=" and "ASIO_OUTPUTS=" which allows you to set the number of in/out... Which I already used to bump it up to 4 when the default was 2. But when I try to set the inputs to 8, for example, Reaper still only recognizes that there are 4 inputs in its configuration.
The problem here is I need more than 4 separate input tracks going into Reaper simultaneously. It would also be nice to just have some "virtual" in/out ports to route things around in more ways. Another option I have considered is the "Rearoute" drivers in Reaper, however I'm not sure if that will play well with JACK. I'll have to test it tonight and see. I guess if it doesn't connect to JACK, it may be theoretically possible to run JACK simultaneously with the Rearoute driver with Reaper, and then actually use alsa_in on the same card to bridge it to JACK (in addition to using alsa_in for the onboard soundcard inputs as well)... But if this even works, I'm not sure if the latency will be worse ...
Does anybody have any insights on this? Am I doing something wrong or overlooking something? Is this just a limitation of wine or wineasio that it cannot assign more inputs than the primary sound card physically has? Would "virtual ports" help me at all in this endeavor?
I can't get jack working
soundcard chipset: EMU10k1X
Here Qjackctl log:
Code:
p, li { white-space: pre-wrap; } JACK server starting in non-realtime mode
Cannot lock down memory area (Cannot allocate memory)
control device hw:0
control device hw:0
audio_reservation_init
Acquire audio card Audio0 .....
jack server is not running or cannot be started
already added
@audio - rtprio 99
@audio - memlock unlimited
@audio - nice -19
to
/etc/security/limits.conf
I am member of audio group. Realtime option unchecked. I also reinstalled ubuntu in a fresh install and the same problem.
JACK will not run ( eg. the server just won't go! ) When running Rosegarden I can not access the Qsynth/Fluidsynth.In the Rosegarden "manage MIDI devices" menu it now shows ONLY one "General Midi Device" -thats all, and I do not know where to/how to get access to qsynth/fluidsynth to use soundfontsIn manage midi devices I ONLY get the option of "general midi"and then its only through "14:0 Midi through port 0 (duplex)" and no
other channels are available or offered!If I import one of the devices that come with rosegarden ( like Aleisis ) there is no sound.
Also if anyone knows: (& if I can fix the above) how do I set Rosegarden to use a software synth like ZynAddSubFX on the track/channel? External softsynths do not show up, so how do I assign the channel to use them>
Ps: Rosegarden did not install with the help files, even a complete removal and reinstall does not fix this- hats why I may be asking questions which could possibly be in the Rosegarden manual ( but NOT anywhere online that I've found in 3 days of searching- and I'm a research assistant for cognitive sciences- eg: good at researching! )
Here's the JACK output:
First the error:
COULD NOT CONNECT TO JACK SERVER AS CLIENT
-Overall operation failed
-Unable to connect to server
Heres the message window output:
p, li { white-space: pre-wrap; } 10:39:56.296 Patchbay deactivated.
10:39:56.478 Statistics reset.
10:39:56.549 Startup script...
10:39:56.549 artsshell -q terminate
[code]....
I have Ubuntu Lucid. If i dont' mistake, it should be possible to hear several applications playing sound simultaneously, with ALSA. But if 1 app is already playing, then starting a second one give always "device is busy".
View 2 Replies View RelatedI recently converted an amd 64 bit WINdows machine to Lucid 64 bit. Everything has gone well. I had numerous issues with Pulseaudio that I removed it. Sound with Alsa has been great, including system theme sounds. I can record via a mike as well. What I cannot do is to capture sounds coming through the sound card. When I record I am getting empty files. The mixer indicates that there are two capture devices. Here is some data on my audio card.
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC888 Analog
[ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: ALC888 Digital
[ALC888 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI
HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
I was having a problem with ALSA, installed OSS, but now nothing works. I want to remove OSS, and reinstall ALSA. I am thinking about reinstalling, but I have all my stuff on here, so don't really want to.
View 4 Replies View RelatedInstalled Fedora 11 successfully, but I cannot get the MP3 files to produce sound.
Have tried the default configuration for sound, the Pulseaudio and the PulseAudioSoundServer.Installed and use KDE interface. Sound works for SKYPE (after selecting HDAIntel) and the Firefox 3.5 Beta 4.
Below are the configuration details.
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphic(rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02
code....
So i upgraded to 10.04 a few months ago, right after it was released. clean install. it worked perfectly out of the box, or so it seemed. I had had sound problems in 9.10 that i didn't experience after i upgraded... until i tried to use some headphones a few days ago. when i connected the headphones, the speakers wouldn't mute. i thought it was no big deal. i had the same issue in 9.10 and it was fixed after i upgraded alsa. i figured i'd try the same thing. I used the same alsa upgrade script i used last time [URL] and it fixed the jack sensing and the sound worked perfectly... for about 5 minutes. after a short while of playing audio, sound would stop playing. i'd stop getting sound from video files, audio files, and even from my browser. i'd have to reboot to get sound again... only to lose it again in about 10 minutes. Now it's regressed to the point where i have no sound even after i reboot.
weird thing is, when i test out an audio file with aplay, it works... even if i just get garbage sound from some mp3 files.
anyway, i've got an HP dv7 and this is my aplay -l output
Code:
sleepee@sleepee-laptop:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 1/1
[Code].....
after installing alsa package, i have no sound.
View 1 Replies View RelatedI've no problems with sound on my laptop - it all works fine but Flash produces no sound at all.
I've got the Pulse audio applet running and when I'm using Rhythmbox it shows that on the playback tab and you can see the signal on the signal bar.
Viewing Flash videos shows the ALSA Plugin but shows no signal on the signal bar.
At least, I think it was the update that broke it. Anyway, my sound was working fine yesterday. I have gone through this thread to try and fix my sound, and it appears that my sound card has been uninstalled.
Step 1. aplay -l
Code:
aplay: device_list:235: no soundcards found...
Step 2. lspci -v
Code:
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device 5770
Flags: bus master, fast devsel, latency 0
Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp .....
Code:
sudo modprobe snd-intel8x0
WARNING: All config files need .conf: /etc/modprobe.d/alsa-base, it will be ignored in a future release.
FATAL: Error inserting snd_intel8x0 (/lib/modules/2.6.31-22-generic/kernel/sound/pci/snd-intel8x0.ko): Unknown symbol in module, or unknown parameter (see dmesg)
Last time my sound wasn't working, I was directed to this thread. The script from this thread might work again, but if it will just be erased after every update, I'd like something a bit more permanent.