Fedora :: Desktop Freezing After Upgrade To FC13?
Sep 2, 2010
I upgraded from FC11 to FC13 last night. The desktop has not been stable since. It will run for anything from 5 to 30 minutes before it locks up. Interesting, if I am already ssh'd in, I can perform commands, but a new SSH will hang, and if I try to SU to root in an already logged in ssh, it hangs.
However, I did finally manage to get the messages that were logged to /var/log/messages at the time of the desktop freeze.
Here are the messages. The first 3 about high speed usb may or may not be relevant. The freeze appeared to happen around the 4th message in the log below.
Code:
Sep 2 13:16:57 starbug kernel: usb 2-4.2: reset high speed USB device using ehci_hcd and address 6
Sep 2 13:26:38 starbug kernel: usb 2-4.2: reset high speed USB device using ehci_hcd and address 6
Sep 2 13:31:20 starbug kernel: usb 2-4.2: reset high speed USB device using ehci_hcd and address 6
Sep 2 13:38:03 starbug kernel: INFO: task jbd2/dm-0-8:558 blocked for more than 120 seconds.
[Code].....
View 1 Replies
ADVERTISEMENT
Aug 15, 2010
I am using FC13 (2.6.33.6-147.2.4.fc13.x86_64) with a ASUS MB/Athlon II X4 CPU for the hardware.Recently my workstation keeps freezing, the power is still on, but the screen goes black,I cannot ping it from other computers on the network, the only thing to do is to press the power switch.
Questions:
* I cannot find any messages in the log, no kernel panic message on the screen, I even installed kdump but no kernel dump is created,does it means it can only be a hardware problem ? I have a vendor kernel module for my NIC and my video card could they cause that kind of problem ?
* I am logging the CPU temp every minutes and I notice that on a few occasion the CPU is close to 70C when the workstation freeze,is 70C too hot for the CPU, is that what CPU do when they reach a temp to high for them to operates ?
View 4 Replies
View Related
Feb 17, 2011
Performed the daily update, don't recall which packages were available, and the boot process freezes near the end upon trying to start my VNC server. Using rescue disk removed tiger-vnc server. Oddly upon reboot, selinux reset the files even though initial setting was 'permissive'. have not tried re-installed vnc yet.
View 3 Replies
View Related
Oct 21, 2010
Last nights upgrade of java-1.6.0-openjdk-1.6.0.0-43.1.8.2.fc13.i686 and java-1.6.0-openjdk-plugin-1.6.0.0-43.1.8.2.fc13.i686 prevent the loading of Ameritrades Command Center.Downgrading to version 1.6.0.0-37 fixes the problem. I'll post the bugzilla number as soon as I get the chance to file it.
View 3 Replies
View Related
Sep 22, 2010
got my upgraded fedora 14 partition to boot, but I find out that I had to reinstall my nvidia driver, no big deal. seemed to go ok, but now when I go applications->system tools -> terminal I get the "starting terminal" thing on the bar, and then nothing. Can't figure out whats up.
View 4 Replies
View Related
Aug 16, 2010
I just installed FC13 on my laptop. I cannot upgrade from FF 3.6.7 to 3.6.8.
View 3 Replies
View Related
May 26, 2010
Took an FC12 system to FC13 via 'preupgrade'There was a REALLY old version of gimp-print-cups in RPM, and the installer announced "a fatal error occurred". However, everything else seemed to download properly and I allowed the upgrader to reboot the system.
a) grub boots the kernel, then the kernel can't find root and panics. It does this because it can't root file system with root=UUID= kernel option. If I manually tweek the grub line to use root=/dev/sdx, kernel finds its root and boots up to the next problem.
b) GUI environment not launched. Init scripts die on "error loading modules.dep". Sure enough - one is not there. Ran "depmod" to generate it ,and rebooted. System reboots into GUI, where I login to find the next problem.
c) Evolution won't start. Reason turns out the evolution-data-server from FC12 is still present. Did a check on just how many other FC12 RPM's are present: 1100. Yeah - over 1000. About 850 of the FC12 RPM's also had FC13 replacements installed. Did an "rpm -e" on these. Also had to do some remove action on mkinitrd, nash, plymouth-scripts-0.8.0, and parted-1.9.0 as there are replacements for these utilities under different package names. That cleaned up the system some, to present me with the next problem.
d) yum package repository still linked into FC12. Removed fedora-release-12-2.noarch and then I could "yum install" evolution and a few other packages properly.
I've done one other FC12->FC13 upgrade today, and that went flawlessly. So, I think in general the upgrade works fine. It just looks like if preupgrade finds anything amiss, it doesn't take care of a lot of things and generally leaves you with an unbootable mess to clean up.
View 6 Replies
View Related
Jun 4, 2010
I was having a job in /etc/event.d. It was working fine upto FC12. With upgrade to Fedora 13, it stopped working . Searching the internet, It looks like /etc/event.d is obsolete and I need to use /etc/init. Also the filename has to have a '.conf' extension. So I have renamed my job as /etc/init/svscan.conf.However, it fails to start automatically on reboot . It works if I manually issue the command % sudo /sbin/initctl emit qmailstartBut fails to start automatically on reboot. Is there anything wrong in my script below ? Let me know if I have missed out anything?
% cat /etc/init/svscan.conf
# svscan - runlevel compatibility
# WARNING: This file was auto-generated. Do not edit!
[code]....
View 4 Replies
View Related
May 14, 2011
I have a problem with LVM. My installation of Fedora 13 is on 2 SATA hard disks, which are set as /dev/sda and /dev/sdb. On sda there are two partitions (boot and a physical part of the volume group) and on sdb is only one partition (other physical part of the volume group). Both physical parts of the volume group are used for one volume group and the VG is splittet into multiple logical groups. The system works and all seems to be ok. But I saw a strange thing on last reboot:
The device /dev/sda was not recognized during the boot sequence, instead the system has build a device /dev/md126p1 with the same geometry and partitions and it has the same disk id as sda.
The volume group is also ok, the system boots into the desktop environment, but the system-config-lvm says that /dev/sda is not initialized and the volume group consists of sdb and md126p1. fdisk -l knows three devices (sda, sdb and md126p1). I think, that is the reason for my problems with preupgrade, which stops after the reboot with a LVM problem (root not found). Can I correct that without data loss?
View 1 Replies
View Related
Dec 20, 2010
I am unable to login to kde after upgrade to fc14 from fc13 as user , the splash screen works for seconds and returns back to login screen, but I am able to do as root
I also managed to login to KDE (failsafe session)
and also I am able to login as normal user to gnome desktop
View 5 Replies
View Related
Jun 2, 2010
I managed to successfully upgrade FC11 to FC13. While doing the post upgrade steps, I made a HUGE mistake. After identifying the unsupported packages, I used "yum remove package1 package2" command to remove the obsoleted ones without realizing the yum was also removing many FC13 packages! Here are the cmd sequence used:
# package-cleanup --orphans
...
# yum remove compat-db45-4.5.20-5.fc10.i386 flash-plugin-10.0.32.18-release.i386 gnome-spell-1.0.8-5.fc9.i386 ifd-egate-0.05-21.i586
[code]....
I simply typed Yes and left unattended for a few minutes after yum prompted there were # of packages to be removed as I blindly believed it would do the job. After returning to the computer, I found many installed icons were disappearing, the wireless suddenly turned off etc. I killed the yum process right away but it was too late.
-Is there anything I could do to undo the yum remove process?
-How to safely remove supported packages?
View 14 Replies
View Related
Sep 19, 2010
I have just upgraded my FC12 installation to FC13. The initial boot failed (just blank screen). Second time I received 'selinux targeted policy relabel is required'. I let that run, but still the boot did not suceed.
I then went in to verbose boot and saw that the boot would hang at libvirtd. So I disabled libvirtd for anything above run level 1. Next boot failed at atd, disabled atd. Next boot failed at 'monthly Smolt checkin'.
At that point and booted in to single user mode and dissabled SELinux, thinking that was the cause of all the problems. That did not help.
The update process has also removed my previous kernels, so I can't test a different kernel
View 5 Replies
View Related
Feb 24, 2011
I've been using Fedora 5 for a few years and have never had a problem with it. Recently I upgraded to Fedora 14 and have run into a problem with the desktop freezing a few minutes after it comes up. I can move the mouse pointer around but nothing happens when I click on any icon. This happens with Gnome as well as KDE. I haven't tried Xfce. I think I read somewhere that the freezing is a problem with my video chip which is an SiS located on the motherboard. Is there a way to fix this problem?
View 4 Replies
View Related
Jun 8, 2010
Code:
$ su -c 'yum install wine'
this forum won't let me put all the text in Transaction Check Error: package openldap-2.4.21-6.fc13.x86_64 (which is newer than openldap-2.4.21-4.fc13.i686) is already installed package nss-softokn-freebl-3.12.4-19.fc13.x86_64 (which is newer than nss-softokn-freebl-3.12.4-17.fc13.i686) is already installed
View 4 Replies
View Related
Dec 25, 2009
configuration: $uname -a
Linux perosoft.home.org 2.6.31.6-166.fc12.i686.PAE #1 SMP Wed Dec 9 11:00:30 EST 2009 i686 i686 i386 GNU/Linux
$/sbin/lspci -nn | grep 'VGA|NV'
01:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 8400 GS [10de:0422] (rev a1)
$rpm -qa|grep kmod
kmod-nvidia-2.6.31.6-166.fc12.i686.PAE-190.42-1.fc12.8.i686
kmod-nvidia-PAE-190.42-1.fc12.8.i686
i have created a shortcut for konsole on desktop, if i click on icon all desktop is freezing for 10-15 seconds before konsole is launched. if i have the same aplication overlapped in taskbar and i click once same thing is happening, desktop is freezing before select menu is appear.
View 7 Replies
View Related
Dec 20, 2009
I installed FC11 from installation cds twice and I'm having a problem with Firefox freezing the system. The mouse cursor will move but nothing else is responsive, including mouse buttons and keyboard.I checked the media on every disc and they all check fine.I never had this problem with FC10. I tried upgrading Firefox -- with the necessary dependency upgrades too but without success.I tried to downgrade to FC10 Firefox and ran into a great big hassle with that.
View 4 Replies
View Related
Mar 2, 2010
I just upgraded to 9.10 from 9.04, and whenever I try to do anything that requires admin privileges (like run software update), I can type in my password, but I hit enter, and my whole computer locks up hard, caps lock and mouse don't even respond.
I have also noticed this same freezing when I try to mount an internal hard drive, which also asks for a password. Sudo by commandline seems to work fine though. Plus occasionally there are weird graphical glitches, which may or may not be related, but only showed up after the upgrade. I also get freezing when running too many high resource apps, like firefox and openoffice at the same time.
View 1 Replies
View Related
Nov 23, 2010
Upgraded from 10.04 to 10.10. Applications freeze intermittently but release with Esc. Movie players acts up with interrupted play as well as fast forward and sound and visual sync. Skype relays interrupted sound intermittently. Problem gives impression of poor RAM performance but problem immediately after upgrade leaves doubt.
View 9 Replies
View Related
May 18, 2011
I recently ran into a problem with my install. I accidentally messed with the bottom panel in my KDE on my root account. This caused my desktop to freeze up. Every time I attempt to restart into my root, it loads, but is completely frozen. Is there some way I can overwrite my KDE config files without starting X server or from a standard user account?
View 6 Replies
View Related
Aug 3, 2010
I upgraded ubuntu from 9.10 to 10.4 today and now every like 20 minutes my mouse cursor freezes out of nowhere and i can't move it.
View 2 Replies
View Related
Oct 13, 2010
I recently upgraded to Ubuntu 10.04LTS. After completing the upgrade I lost use of the keyboard and mouse. I am able to type before the system loads but after loading- nothing.I tried connecting a USB mouse and that wouldn't work as well.
View 2 Replies
View Related
Jan 28, 2010
After migrating from openSUSE-11.1 to openSUSE-11.2 together with a few further online updates including a kernel upgrade to 2.6.31.8-0.1-desktop, my system started freezing a couple of times for two days.
I made up my mind googling for "linux freeze", found a hint saying, that 2.6.31.8 causes trouble, fell back to 2.6.31.5-0.1-desktop, and voila: the problem is gone. What a relief!
The following describes my system:
View 4 Replies
View Related
Sep 13, 2015
I've been having a problem with debian lately. It seems that sometimes a rectangular corner on the top left of my screen freezes and shows what was previously there. It goes away when I close all open windows but shows up again if I open multiple applications, especially if I open the terminal and another application. It can become very distracting and makes it impossible to see what is on the top left corner of my screen.
I'm including a screenshot of my desktop.
I am running Debian 8.2 Jessie on an Asus Q400A with 8 GB of RAM. I have an Intel Core i7-3632QM CPU @ 3.2GHz and am using XFCE as my Desktop Environment.
View 1 Replies
View Related
Mar 15, 2010
Several times in the last few days the desktop has frozen. I don't know if it's KDE issue or another conflict.All programs seem to continue running smoothly, but none of the menus on windows will work, or anything in the task manager, or desktop itself. I've tried killing the task manager but it doesn't affect the issue. If I knew what process was causing this, I might be able to restart it.
View 9 Replies
View Related
Jul 6, 2010
I often want to have mythtv running on one display while I continue with work on the main display, as I CAN chew gum and walk at the same time. When the task is administrative, such as running update manager, I am asked for my password so Ubuntu (10.04 amd64) can authenticate me as an administrator. Good, but I think I would like it not to freeze the desktop, including the mythtv, while it does so. Is there a good reason not to want that? If not, can it be done (avoid freeze when authenticating) and if so, how?
View 1 Replies
View Related
Feb 12, 2010
Two weeks ago my computer started freezing on start up when plugged in. It was suggested to upgrade the APM. What is this and is it not updated through the package update? If not how do I upgrade it?
View 1 Replies
View Related
Jan 31, 2011
I upgraded to F14 from F13, and when the process was complete, I noticed on my desktop, I have a strange drop shadow on the left-hand corner. As if it's shadowing an invisible window. You cannot interact with it, it's not "really" there.It is very annoying, and I can not figure out what it is, or what is causing it. I've checked all my plasma widgets and things like that, but it still persists.
Anyone run into this before or have any ideas?Here is a screenshot showing the shadow, I intentionally set my background to white, so you could see it best. But it shows up on top of any wallpaper. and you can clearly see it underneath translucent term windows/etc.
View 4 Replies
View Related
Jul 11, 2011
I used 'preupgrade' to upgrade from Fedora 13 to Fedora 15. After some problems during reboot, Fedora 15 finally finished the "Upgrade to Fedora 15" step and I was able to successfully boot into Fedora 15.
But my desktop items from Fedora 13 are gone. While the new GUI is nice I would like to recover my desktop items from Fedora 13. How do I do that and put them on the main Window desktop of Fedora 15 ?
View 1 Replies
View Related
Jul 12, 2009
Just upgraded from FC10 using the DVD using upgrade option. I got all the way through the upgrade with no problems. However, upon reboot, when I get to my login screen, I sign in with my username and password but I get an error about kstartup manager. I think the gist of the message was it is missing and I think the error # was 127 (I think). KDE will not start. I also tried XFCE, but it will not start also.
What should I do?
View 2 Replies
View Related
Dec 20, 2009
after the upgrade to Constantine I have a strange behaviour with plasma. The whole desktop freezes when a plasma widget pops up - like opening the menu or plugging in a disk and the mount options are shown. The X server still runs fine (Mouse and Keyboard are still working). Afterwards everything works fine again, I can even use the widget. I also tried a fresh install, and with the noveau driver the problem wasn't there, only after I installed the nvidia driver the problem reappeared again. Desktop effects are diabled. When I try killing plasma-desktop and restarting it from the command line, the desktop also freezes for a short time again, and I get teh following output:
[Code]...
I couldn't find anything helpful in Xorg.0.log or dmesg/syslog. I used nvidia-settings to configure xorg. I have a nvidia 6600 GT. If you need more infos just ask.
View 2 Replies
View Related
