Everyone once in a while Google drives me nuts, this is one such case.Everything I have found from Fedora or Red Hat on stateless or even diskless implementations is old as dirt. Based on Fedora Core 4 or 7. Where is the updated or current documentation for Fedora 13 or 14? With everything going to clouds one would think stateless would be a hot topic again?At least diskless should be right?
View 2 RepliesI am running Slackware64-current(multi-lib) and I have stumbled across something that I don't fully understand.I have read that the kernel-headers should not be updated as glibc is compiled against them and therefore requires that set of kernel headers. Recently the kernel version has been bumped a couple of times but glibc has stayed the same.Should glibc be re-compiled each time there is a kernel update?
Perhaps someone can explain, in very simple terms, the relationship between the kernel, the kernel headers, the kernel modules and glibc.
Is there a way to refresh the current configuration used by modprobe with an updated modules.conf file at the command line for Red Hat Linux 9.0?
View 1 Replies View RelatedI updated my kernel in slackware current but can't install lilo, when i was with my old kernel it gave an error about not finding the sda drives (they were named hda before the upgrade).I booted into the slackware 13.0 dvd and modified fstab and lilo.conf replacing hda with sda but lilo still gives an error of not finding sda drives.How can i install lilo so i can boot into my sistem??
View 14 Replies View RelatedDoes anyone know where to get documentation for KPackageKit? I've searched on KDEs web site and this forum without success. Also on Fedora.org and googling but nothing so far.I recently loaded this distro (F13) to try it out after using mostly openSUSE and some of the minimal distros. I'm finding there is quite a learning curve, even I started in linux with RedHat 5.1.
View 2 Replies View Relatedwhere to find documentation about procfs in fedora? I tried to use man 5 proc, and find some info in /usr/share/doc, but there is no info.
View 2 Replies View RelatedFedora 14 2.6.35.11-83.fc14.x86_64 I have a few webcams I want to serve to web browsers. I downloaded webcam-server, compiled and installed it. Running webcam_server with the -a (test) option, it appears to be doing something. But when I try viewing it with the included Java applet, I get a core dump from the webcam_server process and error messages from the viewing applet. I also cannot successfully view anything with a browser as described in the documentation.
[code]...
Firewall is turned off. SELinux is turned off. I am behind a departmental firewall.
Recently came across this system monitor for the desktop (in PartedMagic).I liked it,thought it would be fun to play with. It bills itself as being for Ubuntu, but it appears to be available through the Fedora repo.I'm just wondering if anyone is/has run it on their Fedora install? The Conky site doesn't appear to have any Fedora related documentation. Note, I'm not looking for instructions, just wondering if any Fedora users are actually running it.
View 9 Replies View Relatedi've been tryin to configure sendmail with cyrus to create a mail server that'll allow outlook users to connect to and download mails. I've done a lot of googling but so far no success have been able to configure sendmail with cyrus but can't connect the outlook to the server. I've come across certain documentation that says it requires to configure saslauthd. Is there any way i can create a mail server to which users can connect and download their mails. Shall i switch to postfix and dovecot instead? Is that easier?
View 14 Replies View RelatedI just installed "f12" and the first thing I did was upgrade the operating system, so I went to System -> Administration -> actualziacion of software, after a while I put "install updates" but did not release any actualiazcion and threw me Error
Code:
could not add package update for abrt-plugin-runapp-1.0.9-2.fc12(i686)updates: abrt-plugin-runapp-1.0.9-2.fc12.i686
How to install either Fedora 11 or 12 from the hard disk of this old ragged laptop? USB or CD installation are not an option, and since the documentation keeps crashing and I stagger saliently in the messy script that is hid behind the windows interface runtime gimmick, I would like to know which switches would make the rebooting operation take to reckognizing the linux package?
View 1 Replies View RelatedI did my updates for F11 as I do often and afterwards booted in verbose mode to see anything different.The update was done 3 days ago and here's the log file..Starting NetworkManager daemon: ** (NetworkManager:1899): WARNING **: State file /var/lib/NetworkManager/NetworkManager.state parsing failed: (2) Error creating state directory /var/lib/NetworkManager: 13.[60G[[0;32m OK [0;39m]As noted, it says OK and the network still connects as usual but this warning msg didn't happen until the update.Is this a bug with the new Gnome Network mgr or could it be related to the new F12 release?I plan to upgrade or clean install F12 soon. Been using F11 since Aug.5 and I really like it by far the most stable Gnome of any distro I've tried. Was a KDE fan until now lol. I never liked the idea of KDE4.x but it is maturing. But-- most dists don't even offer tried-true KDE 3.5.10 anymore.ay need to fwd this issue with GnomeNetworkManager to the bug forums for Fedora/RHEL.UPDATE: I installed the updated SElinux Policy (testing) via rpmfind.net.selinux-policy 3.6.12.92.fc11.noarch.rpm and selinux-policy-targeted 3.6.12.92.fc11.noarch.rpm and the issue with the NetworkManager error went away!!I assume this package will be released as an update soon
View 1 Replies View RelatedIs there a yum command that will tell me the time and date that a specific package was last updated (i.e. when I ran yum update [packagename])?
View 4 Replies View RelatedI run F15 on my desktop PC and /var/log/dmesg is not being updated. I used preupgrade to upgrade from F14 to F15 on June 3. I boot F15 at least once per day. /var/log/dmesg has not been updated since June 3. /var/log/dmesg was being updated correctly when I ran F14. On f15, if I issue "dmesg" from the command line, I get the expected result. Is this a bug?
View 12 Replies View RelatedIs there a kickstart file somewhere or some other way or creating updated iso's for Fedora? I do a lot of installs testing stuff and it would be nice to create a new install disk every month or so. Cuts down on the update time.
View 3 Replies View RelatedIs there guide for converting ext3 to ext4 on Fedora? I use Fedora 12 which is regularly updated. How safe is procedure for data, I have only one ext3 partition on disk which has one ntfs and that ext3 partition (and also one small swap partition).
View 5 Replies View RelatedI've just allowed the update manager to update my system and now it boots as far as the login screen then immediately reboots, tried to use the installation disk repair system option but the only option it would allow was install system. anyone known how to boot into single user mode to try and fix this? or is re-installation the only option? I've discovered that hitting esc will booting gives me a more informative boot seems that udev is not loading looks terminal to me.
View 6 Replies View RelatedFedora 13-64. Just update the flash-plugin with yum and it says it succeeded:
Code:
Running Transaction
Updating : flash-plugin-10.1.82.76-release.i386 1/2
Cleanup : flash-plugin-10.1.53.64-release.i386 2/2
[Code]....
I set up my home server like 3 year ago on a Fedora core 4, I am running a NAT, firewall and FTP very smoothly on it. In the past 3 years, it has been doing perfectly without any modification/ upgrade. But recently, I just realized I might need a VPN server on it, but the recent release of OpenVPN doesn't support Fedora core 4 anymore, therefore I suddenly want to make an upgrade. I've read the articles/ manual for Fedora 13, yet I do not find any suggestion on how to upgrade to 13 from core 4.
how can I do an upgrade in the easiest manner as I don't want the server cease working too long (I need its NAT for my network).
Are the repositories in fedora constantly updated or are they updated in the next release like ubuntu?
View 6 Replies View RelatedI just finished an update on the kernel and it seems to be ok as shown in the grub:
Code:
default=0
timeout=5
splashimage=(hd0,8)/boot/grub/splash.xpm.gz
[code]...
Yesterday fedora automatically updated the linux kernel, and now it wont start entirely up. After the fedora logo has finished loading up the white, and it has turned into the real logo, nothing happens.However, i can boot into fedora with the old kernel via grub, so i guess it is related to the kernel update.
View 14 Replies View RelatedBooting into runlevel 3 and then issuing the $init 5, command leaves me this."binary handler for windows applications already registered" and the system hangs there.I yum removed wine, thinking that might be the issue, but that solved nothing.
View 12 Replies View RelatedI installed VirtualBox (and the virtualbox repo) a few months ago and it works brilliantly. The other day it informed me there was an update available. I downloaded: VirtualBox-3.1-3.1.2_56127_fedora11-1.x86_64.rpm from [URL]
Why doesn't yum update find these new versions of VirtualBox? Is the original repo file out of date? Here it is:
Code:
# cat /etc/yum.repos.d/virtualbox.repo
[virtualbox]
name=Fedora $releasever - $basearch - VirtualBox
baseurl=http://download.virtualbox.org/virtualbox/rpm/fedora/$releasever/$basearch
enabled=1
[Code]....
I had both 32 and 64 bit wine installed on fedora 12 and worked ok.But after I updated them from 1.1.29 to 1.1.36 from fedora repository, the 32bit wine stops working and gives the error message "wine: for some mysterious reason, the wine server failed to run." when I tried to start any windows programs which worked before.!
View 2 Replies View RelatedI am relatively new to Fedora and appreciate it is intended to be a bleeding/leading edge distribution but the continual requests to reboot the computer after updates is intrusive and seems rather odd for a unix operating system. It is often not clear to me why it is necessary when I look at the names of the items triggering the request.
View 10 Replies View RelatedI am getting no sound output on Fedora 12 (fully updated). If I switch to Windows Vista (which is also installed on the same machine), everything is fine. So, I guess I will have to configure sound from somewhere. Where should I start?
View 2 Replies View RelatedI came in to work today and updated my laptop, which is common for fedora to either update every week or bi-weekly. But now the system has a major delay that is making it unbearable, is anyone else experiencing this? I am running Fedora on a insprion 1525 with dual core pentiums, and 4gig ram.
View 14 Replies View RelatedI did my update back when F13 was first out. A lot of the F12 packages are still on the machine. Should I be concerned. My latest thing was dealing with the Kmod-Nvidia packages left behind from F12. Someone suggested removing them and once I did my updater did its job perfectly.
So, the question is do I need to remove all the F12 packages or should I wait until there is another conflict? Secondly, if I should remove them, is it a search and destroy mission or can I simply nuke them all in one grouping?
I'm currently running F11 x86 and want to update to F13 x64, so a new drive and fresh install and copy all the config & data from old drive. and Prey, a lot....I'll be installing F13 x64 later this weekend, But F14 will be out in a few months then F15 and so on.I've tried the upgrade option (x86 to x86 in the past) on the install dvd but it doesn't work and I wind up with a broken install and have to do a fresh install after saving most of the import data and config files, but I usually missing something and get hosed. Part of the problem could be using Nvidia drivers for video and several applications installed from several different repos.I've never been able to safely uninstall the Nvidia driver and still have a working system, let alone upgrade to a newer version and still get a visible desktop.
I was thinking that couldn't I just edit a yum file and point it to a new repository and have it upgrade the machine with out all the fuss?I followed a procedure once or twice on how to do a inplace upgrade, but that didn't work either. I'd like to keep the machine running the latest bits, but with all the pain and suffering I need a simpler method to do it. Is there a procedure or process I can run or follow to keep Fedora in sync with the latest release with out having to continuously swap disks, reinstall and copy critical data files?