I am getting no sound output on Fedora 12 (fully updated). If I switch to Windows Vista (which is also installed on the same machine), everything is fine. So, I guess I will have to configure sound from somewhere. Where should I start?
View 2 RepliesI am unable to get a Brother MFC-5460CN printer to print on a fully updated F12 system. Everything looks normal in Administration | Printing. All fields match the format shown on the Brother site. The printer status is updating correctly so there is communication to the printer. But jobs just queue and eventually show as printed but nothing is actually printed. There are no other printers. Here is the output in /var/log/messages from plugging in the printer and trying to print a document:
Code:
Apr 4 21:23:34 localhost kernel: usb 2-2: new full speed USB device using ohci_hcd and address 4
Apr 4 21:23:34 localhost kernel: usb 2-2: New USB device found, idVendor=04f9, idProduct=01b7
Apr 4 21:23:34 localhost kernel: usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=3
Apr 4 21:23:34 localhost kernel: usb 2-2: SerialNumber: BROJ6F904373
Apr 4 21:23:34 localhost kernel: usb 2-2: configuration #1 chosen from 1 choice .....
I followed the instructions on the Brother Linux drivers page and all the rpms loaded without error. But the log is showing some type of key problem.
I updated the following packages:
[Code]...
Before going to sleep I just closed my laptop without shutting down, but the next morning when I unlocked I had no sound. Does anybody see something suspicious in the updated packages?
I just upgraded to jessie (kde) and am not able to fully configure my sound. It was working on wheezy. I have tried alsamixer and managed to get sound (playback & record) through my front case connectors. Can't get anything out of my rear motherboard connectors.I also have a bluetooth headset which I have successfully paired but which doesn't show up as a sound device in pavucontrol.
lspci | grep udio
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 9 Series Chipset Family HD Audio Controller
[code]....
I'm not sure where to have posted this but I can't seem to get sound.
After typing ' lspci ' I got the following code...
I'm using a LCD monitor through the HDMI port, and I have no sound, nor through the audio port. (Both of).
Also, I have tried Alsamixer but nothing is on mute and I turned them up to the fullest. Here's a screen-shot of what HDMI gives me in alsamixer:
Seems HDMI won't allow me to go over 00 volume?
What am I doing wrong, or have not done?
Running 10.10 and win 7 on my HP dv6-2150us laptop and I'm having a few issues.
First how do I get HDMI audio output to my TV? I think I have just a integrated Intel graphics card. It works fine in windows but I can't seem to get it to work in Ubuntu. I tried searching but couldn't find anything pertaining to this issue.
I am using fedora 12 (omega 12.1 remix), after installation I got very very low sound output and I dreaded it was to remain this way. Then I did some searching and found this command in a linux site 'alsamixer -c 0', I turned up everything and yippee I had sound. But now the problem is at each restart the settings are defaulted to a low output. How can I make the change permanent? Can I call alsamixer command and give 9-10 up keys as its input in bashrc. Well I am just guessing.
View 2 Replies View RelatedI don't know anything about ubuntu. Could you guys help me out. I'm pretty knowledgeable with windows if you guys need a printout of something let me know. My friends getting really frustrated about this. Help!!i
So here's the situation. He plugs his audio jack into his computer and then into the speakers but it still plays from the computer speakers.
Several days ago, I replace my PC's motherboard and now sound is too low - I can't hear practically anything, I used alsamixer to configure output volume level to normal, but this won't survive reboot.
I tried to use 'alsactl' and saveed rules, and edited rc.local to restore - but it didn't help. Can anyone tell me how to fix it?
I have just bought a new PC with an ASUS M4A78-AM motherboard with integrated VT1708S 6-channel sound chip in it, so I freshly installed fedora 12 without any issues However, I can't get the surround sound working. I have searched many forums a lot, and haven't found any solution yet.It seems that even the SPDIF output does not work on this sound card, and that is what people talk about on almost every forum / mail list. So I was unable to find almost ANY information regarding ANALOG surround sound.
The motherboard has 3 jacks on it - green for FRONT / 2 speaker set; blue is the line in OR THE REAR-SPEAKER out, and pink is the microphone OR side speaker out in the 6-spk configuration.My speaker configuration is 4.1 [2 front, 2 back and subwoofer]. Line out does not produce any sound.I have uninstalled pulseaudio [sudo yum remove pulseaudio]Now alsamixer shows a lot of controls, but even if I unmute line out and set it to max, it is still not producing any sound.
I have installed Fedora 13 on my laptop, but there is something wrong with the sound。It just comes from both the computer and the headphone. I have installed alsa, you can see as follows:
[PDS@localhost ~]$ rpm -qa | grep alsa
alsa-lib-1.0.23-1.fc13.i686
alsa-driver-1.0.23-84.fc13.i686
alsa-firmware-1.0.23-1.fc13.noarch
report-config-localsave-0.10-5.fc13.i686
alsa-kmdl-2.6.34.7-56.fc13-1.0.23-84.fc13.i686
alsa-plugins-pulseaudio-1.0.22-1.fc13.i686
alsa-tools-firmware-1.0.23-1.fc13.i686
alsa-driver-devel-1.0.23-84.fc13.i686
alsa-lib-devel-1.0.23-1.fc13.i686
report-plugin-localsave-0.10-5.fc13.i686
alsa-utils-1.0.23-3.fc13.i686
Here are the screenshot of the sound preferences.
I have a fresh install of Natty and i'm having some issues getting sound to work. My laptop has a built in sound card which works just fine. However, i also have a usb 5.1 sound card which isn't working at all. Both devices show up in 'Sound Preferences' but when i select the 5.1 device as the output device sound doesnt work. I ran the alsa-info.sh script and the output can be found here.
View 4 Replies View RelatedI am using a USB headset and a logitech QuickCam Pro 4000 with Ubuntu 10.04
1. When I change the sound to internal sound the webcam works in Skype but I have not sound.
2. When I change the sound to the USB headset (sound output) the webcam does not work in Skype.
I have installed Fedora 10-x86_64. I was happy and content with the distribution. Earlier, I found that there is no sound on my headphone's jack where as the normal sound output from my laptops's speakers is OK. I fiddled with the available mixers but couldnt get anything. There seem to be 5 different mixers (HDA, ALSA, OSS), 3 for the playback and 2 for the capture.
I am using an acer 4530 laptop. It has a nvidia Nforce MCP77 chipset. and the o/p lsmod| grep snd :
Code:
I did a alsa-info and upload the details at:[url]
I have Karmic Koala 9.10 working (near) perfectly on my iMac7,1, as identified by
Code:
NOTE: See below for Lucid 10.04 update to these instructions
IMPORTANT: You need to complete the installation procedure while connected to internet via the WIRED network. Then you can enable the wireless by installing the restricted drivers, after the install is complete. Also the fglrx ATI Video driver is effortlessly installed via Menu > System > Administration > Hardware Drivers
The sound card gave me some trouble, as it is an Intel HDA Model, reported as 'Codec: Realtek ALC889A' by
Code:
It shows up in lspci as:
Code:
It sounded rather tinny at first, when I tried mbp3 and other model names. Then I added the following line to /etc/modprobe.d/alsa-base.conf :
Code:
After reboot, my sound is full and can be put much louder than before. Jack detection works. Some people might have to leave out the power saving options. See below.
dmesg reports:
Code:
Sources consulted are mostly the kernel documentation ( Enter into the terminal: sudo apt-get install linux-doc
The relevant info can be found in HD-Audio-Models.txt.gz and HD-Audio.txt.gz in /usr/share/doc/linux-doc/sound/alsa )
I just installed 10.04 (64 bit, in case that matters) last night. I have onboard sound and video, and they working fine until I installed the proprietary drivers for my video card. When this happened, my sound got all fuzzy/scratchy. I can go back into the Hardware Drivers and remove the proprietary ones and then the sound is fine. My problem is that I want to use better drivers for my video, but not at the sacrifice of sound quality. I went to the nVidia site, and they have drivers from April 24, 2010 on there, but there's a couple problems with that. I don't know if they are any different than the ones I already installed through Ubuntu, and I don't know if they will cause the same issue. Since I'm fairly new to linux, installing the drivers from the .run file seems like more of an undertaking than I want to do right now, and I don't want to mess anything up and not be able to revert my changes. With the Hardware Drivers utility, I can easily remove the drivers and the sound works, but I don't know if that will be the case.
I have an ECS GeForce7050M-M motherboard. I can't really find specifics for chipsets, but the nVidia site detected a GeForce GTX 480 for video. If I recall correctly, my audio is some Realtek HD thing. I had this same problem when I tried 9.04, but I didn't narrow it down to the nVidia drivers at the time.
lost all sound on flash after firefox updated (or shortly thereafter)
in other words videos and the like are silent (which is a kind of a blessing, really).
10.04lts 32bit
firefox 3.6.8 - (for ubuntu - canonical 1.0)
flash 1.0.10 (tried r&r already)
external usb sound card, desktop system
sound works great everywhere else, including mp3's on web through firefox. i searched the forum, of course, but didn't find anything that seemed relevant or up-to-date.
I just updated to 2.6.33 kernel and I am using an Intel Mac with ubuntu 9.10 running native. I upgraded because the new kernel has sound working for the imac (at least through headphones). Once the kernel was updated to 2.6.33 the proprietary NVIDIA graphics driver which I had activated through systems -> administration -> hardware drivers is now inactive and will not work. systems -> administration -> hardware drivers says to look in /var/log/jockey.log, here is the last part of that file [URL]. PLEASE HELP OUT. I hate using the Mac os on the other partition.
View 2 Replies View RelatedI have a Dell box that got a fresh install of Fedora 13, along with XFCE during the initial installation, and it works just fine from a local monitor/keyboard/mouse setup.Now, in wanting to setup VNC to allow a remote XFCE desktop, it's not quite starting up properly:
The result is that I'm able to connect to the VNC session from another computer, but all I see is my XFCE desktop pattern image, and the XFCE mouse cursor (not in a spinning 'wait' state; I know it's the XFCE mouse, since my VNC client has a simple dot cursor that gets overlaid over the XFCE cursor, and I can move the mouse around the screen and the cursor follows); no menu bar, no tool bar, no desktop icons.I've tried changing the last line of my xstartup file to "startxfce4 &", and "startx &" with the same result.Is there a log file I can look at that would tell why XFCE is not fully starting up?
I'm running a Dell D630 laptop that uses the onboard intel i915 chipset for both audio and video. This is in a docking station that's connected up to a larger monitor. The laptop boots just fine as it has been for quite a while now. I get to the login prompt, enter my credentials and then after pressing enter and it looks like it's going to load my profile, the wallpaper updates but then the screen goes black for a moment and I'm then brought back to the login prompt again. The system is up on the network so I was able to ssh into it and capture the following from the logs during a login attempt.
Sep 11 08:03:27 jdesilets kernel: [drm:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
Sep 11 08:03:27 jdesilets kernel: ------------[ cut here ]------------
[code]...
I downloaded and installed a new copy of Fedora 11 last week onto a new computer (hereafter "proximate"). I also have a remote computer without a monitor running an outdated version of Red Hat Linux (hereafter "remote"). To manage the processes on remote graphically, I ssh from proximate into remote; this connection succeeds without incident in transmitting text (including commands) between the two computers; however, the command "gnome-session" returns: (gnome-session:15789): Gtk-WARNING **: cannot open display:
(The numbers apparently represent the process identifier and vary from instance to instance.) A similar warning (and no accompanying graphics) occurs whenever I attempt to start any graphical user interface from remote via ssh from proximate. The issue almost certainly lies with proximate; remote successfully communicated graphics to the ancient box that proximate replaces.
Interestingly, I cannot communicate via ssh from remote to proximate (within a secure shell from proximate to remote). If I execute /usr/sbin/sshd on proximate as root, then I can login, but even then I cannot execute any commands.
Consider the following output:
If I execute ssh -vvv proximate from remote to proximate, then I get a lengthy output that ultimately ends with "debug1: Exit status 254."
What must I do to communicate both text and graphics among my computers?
I have a problem accessing repositories behind my proxy. Another problem, I have no access for that installation right now, but I do remember what I did.
First, this is fresh install Fedora 13 with KDE. I manually added IP, subnet mask, DNS, to network manager. Then, manually added proxy settings to SystemSettings/ NetworkSettings/ Proxy. After that,
Also, in /etc/yum.repos.d/fedora.repos and i686.repos (I mean, Core repositories and Standard one) I commented out "fedora" address line, and uncommented "mirror".
Now I can, for example, yum install wine, but yum install unrar fails totally (not found), and yum install mc (midnight commander) shows error, where I can copy address or rpm, and make localinstall then.
When I load a fresh install of Fedora 14 on my system that the desktop doesn't load completely? It goes as far as giving me the desktop with a background, the icons and status bar do not appear. I am able to right click and open a konsle terminal but only when I am in KDE (failsafe)
What is weird is initially I had no problem. But when I switched to a different monitor the desktop would not load correctly. I have reinstalled the OS since then and still have the same issue.
Machine Specs: Asus P5B Deluxe w/ Intel Core 2 Duo E8400, 8gigs of ram and an Asus GeForce 8400 GS. I downloaded and installed the x86_64 DVD Installation disc for Fedora 11 the day of the release. I allowed the installer to utilize 100% of the disk with the default partition configuration. I only installed KDE.
Upon first boot the machine didn't boot in under 20 seconds, but it wasn't slow enough to give it any though. Once logged in, everything ran great. The system has been running great since the launch date. I rebooted once or twice since them and thought the same thing as the first boot, not particularly fast, but not slow enough to care.
This morning I rebooted and it almost seemed broken. It takes about 20 minutes to get past the loading bar, and way too much time to log in. When the loading bar is going I hit escape. It looked like "Starting system message bus" took the longest, but it wasn't the only slow thing. After some more time, the background for the log in prompt appeared. Once the log in prompt fully appeared I mistyped my password. It took a good four minutes to authenticate unsuccessfully. I reentered my information correctly. It took another four minutes for the prompt to disappear, then it continued to load very slowly.
New 320 Gig HD. Installed FC14 from DVD and it worked, except there are no icons at all to get started as there were in FC 13. Cant find "Places", "Applications" that were at the top of the screen. Now it's blank except for the splash design. Tried to re-install, but it won't do that. Just goes to the HD and the same blank splash screen. Thanks for the help. Please be easy with explanations as I'm new at this.
View 14 Replies View RelatedIt appears that the update process on or about 2011.04.28 downloaded and installed a non PAE kernel (kernel-2.6.35.12-90.fc14) on my box. Until this update, it has been installing PAE designated kernels. When this update occurred, it downloaded the PAE headers and debug, devel and debug-devel PAE components. Has anyone else noticed this in their update?
View 4 Replies View RelatedI decided that I'd torture myself and try to get a server up and running with SELinux fully enabled. I so far have figured out virtual hosting, vsftpd, and SSH to work with it nicely, but I can't figure out what to do to get AWstats to be viewable through a browser with SELinux enabled. This is what I get from /var/log/messages:
Code:
Mar 19 15:09:34 localhost kernel: type=1400 audit(1237496974.987:69): avc: denied { getattr } for pid=4769 comm="httpd" path="/usr/share/awstats/wwwroot/cgi-bin/awstats.pl" dev=sda1 ino=1267968 scontext=unconfined_u:system_r:httpd_t:s0 tcontext=system_u:object_r:httpd_awstats_script_exec_t:s0 tclass=file
Mar 19 15:09:34 localhost kernel: type=1400 audit(1237496974.987:70): avc: denied { getattr } for pid=4769 comm="httpd" path="/usr/share/awstats/wwwroot/cgi-bin/awstats.pl" dev=sda1 ino=1267968 scontext=unconfined_u:system_r:httpd_t:s0 tcontext=system_u:object_r:httpd_awstats_script_exec_t:s0 tclass=file
Could someone explain to me what I should be looking for in these messages? Or what I would need to do to fix it?
I ve done lsusb and it finds the usb speakers. but I cant get an output at all, whatever I do in preferences/sound or preferences/pulseaudio preferences.Booted with XP and speakers work fine. Sound worked fine with Lucid and has done until today with Maverick, did have similar probs with sound going sometimes with Karmic, but they could always be sorted by adjusting the settings, cant get anything and its sudden,
View 2 Replies View RelatedI've installed yesterday xmms and now I want to uninstall it. I've done it with yum. When I uninstall it like this: "yum remove xmms", then yum removes this package, but, when I check "yum list | grep xmms" I get full list of other packages like bluecurve-xmms-skin.noarch, gkrellxmms2.x86_64, gxmms2.x86_64 , ...
I want to cleanly remove the xmms, so I should remove all this packages "manually"? Is there a method to check wich packages are not used by any program on my computer and remove them? Or any method to remove all packages with a program automatic?
I am trying to mount a directory from my server onto my wireless laptop. The directory mounts successfully if I am already logged into the laptop with another account first but if I log on initially with the user who requires the mount the mount fails. I suspect the mount is taking place before my network connection is up, is it possible therefore, to delay the mount in fstab until the network is fully connected?
View 3 Replies View Related