Booting into runlevel 3 and then issuing the $init 5, command leaves me this."binary handler for windows applications already registered" and the system hangs there.I yum removed wine, thinking that might be the issue, but that solved nothing.
View 12 RepliesI have updated to the new kernel that was available from 11.2 and now I cant use my system.
It boots up into kde 4.3.5 and then right when its just finishing it freezes everytime and I hear that last tone of the bootup sound ring continually until I force a shutdown. Anyone else have this issue with the update?
I use release 11.2 and this one works very well. I try new release 11.3 and my system crash when I wont to start system on runlevel 5. There is Sempron 2 GHz CPU and nvidia fx550 graphics card. Keyboard PS2 does not responds but mouse on USB work well. When I start "safe" boot option system work well. What I can to do ? What I must change
View 4 Replies View Relatedrunlevels 2 -5 are identical in Ubuntu. /etc/init/rc-sysinit.conf is used instead of /etc/inittab for changing the runlevel. But there's no point doing that since the runlevels are identical. The default runlevel is 2, so I tried to find some service I could disable in /etc/rc2.d. I didn't find anything I could work with.
View 4 Replies View RelatedI have recently installed Fedora 10 in my x86_64 system and fully updated. The updation size was nearly 650MB. My question is can I make a an updated installer DVD from my existing fedora system?
View 8 Replies View RelatedI am unable to get a Brother MFC-5460CN printer to print on a fully updated F12 system. Everything looks normal in Administration | Printing. All fields match the format shown on the Brother site. The printer status is updating correctly so there is communication to the printer. But jobs just queue and eventually show as printed but nothing is actually printed. There are no other printers. Here is the output in /var/log/messages from plugging in the printer and trying to print a document:
Code:
Apr 4 21:23:34 localhost kernel: usb 2-2: new full speed USB device using ohci_hcd and address 4
Apr 4 21:23:34 localhost kernel: usb 2-2: New USB device found, idVendor=04f9, idProduct=01b7
Apr 4 21:23:34 localhost kernel: usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=3
Apr 4 21:23:34 localhost kernel: usb 2-2: SerialNumber: BROJ6F904373
Apr 4 21:23:34 localhost kernel: usb 2-2: configuration #1 chosen from 1 choice .....
I followed the instructions on the Brother Linux drivers page and all the rpms loaded without error. But the log is showing some type of key problem.
I am using the default CVS available in Fedora 9. I initiated the CVS server by
cvs -d /usr/local/cvsproj init
To check-in and check-out the following exports commands are used
export CVS_RSH=ssh
export CVSROOT=:ext:swathi@SERVER:/usr/local/cvsproj
I shall explain problem by taking an example. A project was checked in long before (for example the checkin date is 25 Feb 2010). And today (i.e. 21 June 2011) I checked out the project from the repository. After checkout, the date of the project in the repository is changed from 25 Feb 2010 to 21 June 2011. This date is set to all the subfolders in that project. But the files in the project retains the checking date i.e. 25 Feb 2010. Why the check-in dates are getting updated/changed to the system time after doing check-out.
Boot of a new minimal system hangs on "Stopping save kernel messages" or "stopping system v runlevel compatibility". I have ubuntu minimal iso x86_64 from usb stick created with unetbootin (don't have a cd drive on the machine in question), and after that I didsudo aptitude install gnome-terminal network-manager-gnome gdm geditsudo rebootnever got a system back. Annoyingly I can't boot into the recovery mode either, and it seems the keyboard is only semi-responsive (i.e. many dead keys when at the grub menu).qualms about reinstalling, but I've done this a few times and ended up at the same place every time.
View 6 Replies View RelatedI've just installed gNatty 11.04 on my machine the first thing I've done is to update via the terminal:Quote:sudo apt-get update && sudo apt-get upgradeAll seemed fine but when I've gone to restart it gets stuck at this message while booting:Quote:Stopping System V runlevel compatibility've reinstalled but the problem is still occurring,
View 5 Replies View RelatedI have created a new script that I am executing at system startup. All was going well until the last step... see below
1. Create script mytestscript.sh
2. Made executable
3. Test script from command line. Works no problem
[code]...
I have installed 10.04 LTS server and after that x-window-system-core, gnome-core and gdm. Now it boots to a gui in runlevel 2.
1. How can I set the default runlevel to 3?
and
2. boot into runlevel 3 without a gui?
I have a default runlevel of 5 where the x-server crashes and takes no key strokes from the keyboard. I want to boot into runlevel 3 to edit xorg.conf. This is SuSE 11.3_64 with GRUB.Anybody who knows how to tell GRUB to please comply with this from the GRUB command line (or however else
View 3 Replies View RelatedToday I upgraded a few applications per the package updater and now I cannot boot with the latest kernel. It looks like the nvidia driver wouldn't work, I got a [FAILED] message, followed by two [WARNING] messages. Then the Starting atd message displayed and the screen flickered a few times, then froze. I reset with the button on the PC.
I was able to log in using an older kernel: 2.6.34.7-56.fc13.x86_64. The newer kernel that wouldn't load may have been 2.6.34.7-61.fc13.x86_64.
I looked in the boot log and it had the log from the successful log; but, not the one that failed.
Code:
[DnA@DellXPS ~]$ cat /var/log/boot.log
Welcome to Fedora
Press 'I' to enter interactive startup.
Starting udev: udevd[502]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/50-euvccam.rules:1
[Code]...
I want to automatically run a script once the system has entered runlevel 3 during boot (the script requires network access). I know about /etc/init.d/boot.local but it's my understanding it's triggered in runlevel 1. I also know about init.d scripts but they seem a little daunting.
View 3 Replies View RelatedSometimes, when I need to affect some quick changes on my box, I boot up in runlevel 1 by adding "single" to my kernel line in the Grub menu. I use Grub because I also have Vista+RHEL+CentOS for operational reasons and then Slack for everything else.Since I upgraded to Slack13 I noticed that this was not working. I assumed that it was because I had installed on a encrypted LV, so I tried it on VirtualBox installs. I tried both on GRUB and LILO on the Virtual Slack. I tried both the 32 and 64 bit versions. It does not work.
View 10 Replies View RelatedWhen I execute "init 1" not much is happening! The wireless network drops out, but the GUI is still there. It always worked in previous Fedora releases. What is changed now? Does anyone know how to switch between different runlevels in F14?
View 14 Replies View RelatedThis probably has been asked many times, if yes I apologize and please someone point me to the old post.
If my FC14 would not boot. And I didn't setup the boot menu, How do I get into run level 1?
I boot by default into Runlevel 3 on my F12 Server. If I need GUI apps then I run startx.The server I'm using (eeeBox eb1501) has a wired and a wireless LAN interfaces. I run two networks and want to be able to connect to the wirelss one without having to start Gnome or KDE just to get the WLAN to connect.IS this someting to do with the NetworkManager or just the gnome-keyring?The wired interface comes up at boot but the Wireless one won't until I start the GUI.
View 8 Replies View RelatedI don't really want to boot into GDM as I sometimes don't need X. Apart from XFCE, I've got i3 WM. I've changed the default runlevel to 3 so that I can startx. How would I change the WM session from CLI?
View 5 Replies View RelatedI have updated Ubuntu all the way to 10.04, but the desktop environment still keeps its old looks. For example, the GNOME panel has the old, light grey colour rather than the new, dark grey. The new greyscale icons for battery and wireless aren't in place either.
What shall I do to bring it up to date either immediately or when 10.10 comes out?
I have a RHEL 3 server that I just tried to install updates on, but up2date kicked back the following message and no updates. Is redhat not offering updates for version 3 anymore?
"This system may not be updated until it is associated with a channel".
I installed Fedora 11 in VirtualBox, and the initial installation went fine. I then did a system update, and the video driver is broken. When I enter GDM, I have a black and blue screen, with the Fedora logo replicated across the screen.
I don't enter the Grub screen when I boot, and I wonder if there's another way to boot into runlevel 3. At one point, I'm prompted to type "I" to enter interactive mode, but doing this repeatedly still boots me into the GUI.
I recently switched my server runlevel to 3 and I don't notice any updating of any kind going on, does the updater run in runlevel 3? If it is possible, how do I do it? Is it a service that I need to start? If so, how?
View 2 Replies View RelatedI'm running a server that boots into runlevel 3. I can ssh into it but I only get a blank screen when I try to connect to the vncserver that's running on it. Is it possible to connect to a vncserver that's running on runlevel 3 or does X have to be running for the vnc to work?
View 1 Replies View RelatedRunning 64-bit Fedora 10 with original installation runlevel being 5.
So, there was this need for working with runlevel 3 for some days, then I've edited "/etc/inittab", changing line
id:5:initdefault:
for line
id:3:initdefault:
And the system went well, restarting automatically on runlevel 3.
Now it needs to restore its original runlevel, that is 5.
I've edited "/etc/inittab" to its original state but the system keeps starting on runlevel 3.
Also, I've tried
# init 5
and
# telinit 5
Both commands load X and the login screen but then when it restarts, it gets back to runlevel 3.
What can be done to get this system back to runlevel 5, automatically, during its INIT process?
I am running a mainframe emulator on an old HP server in runlevel 3 text only. I have googled a bit but found no information on controlling the text video mode in runlevel 3. When I boot my Fedora 12 system chooses the highest resolution it can meaning my c3270 terminal emulator program (80x25) is in tiny font occupying a fraction of the upper left corner of the screen. I have looked everywhere but can find no mode setting commands for runlevel 3 text only.
View 7 Replies View RelatedThat about sums it up. I have read this, but I am not sure it pertains to me exactly. Any help other than "run at 5"
View 1 Replies View RelatedI am using Fedora 13. If I boot directly to runlevel 5, the Fedora progress bar goes all the way across and then just stays at 100% and X never loads. I have to hard-restart the machine. However, if I press 'a' to append the kernel arguments and append the '3' to start in runlevel 3, login at the terminal that is displayed, and then type 'startx', everything works perfectly.
View 6 Replies View Relatedi performed an upgrade from fedora 13 to 14 on my test fedora virtual machine (vmware player 3) and i have this incredible problem: I normally boot in runlevel 3 and i start X only when needed with the startx command.When I want to exit from the X environment I use the "log out <username>" command on the System menu (gnome is the desktop manager). After upgrading to fedora 14 and applying all the available upgrade, this won't work anymore! I'm able to start the X environment but when I try to logout the window/desktop manager got killed but X remain active, the background image is visible on the screen, no mouse or keyboard interaction is possible.
The system is stiil alive, i can login through ssh, but i was not able to do anything. manually switching the runlevel from 3 to 5 and viceversa with telinit doesn't solve the situation: switching to runlevel 5 cause the login screen to be visualized and i' can login in the gnome desktop environment but when i logout o when a try to switch to runlevel 3 I always obtain the same result: X remain active and unusable, it's impossible to go back to a text console. what can i do ? any of you has experienced a similar issue ?
I get the "Could not download all repository indexes" error whenever I check for updates in update manager. In the error window it says this:
"Failed to fetch [URL] 404 Not Found. Some index files failed to download, they have been ignored, or old ones used instead.
I'm not sure what this repository is for, so I can remove it, but I just want to make sure this is not the "main" repository that I get updates from. Will I still keep getting my system updates if I remove it?