I am doing some R&D on 11g RMAN in oracle at home. i have installed oracle enterprise linux and i have installed oracle software. when i am trying to configure listener, it is error-ed out. i have verified that telnet with the port is not working and i am seeing connection refused error.
View 3 RepliesMy system is Ubuntu 11Before I typed "telnet localhost" or "telnet localhost 23". I have make this work below:$sudo apt-get install xinetd$vim /etc/xinetd.conf
defaults{
instances=60
log_type=SYSLOGauthpriv
[code]....
when i try a telnet to a host like that: telnet 10.10.10.10 1234 i got this: telnet: Unable to connect to remote host: Connection refused.
1/ does this mean that the problem is not due to a firewall, but that the host 10.10.10.10 doesn't listen on the port 1234? other way does this mean that my firewall is authorizing traffic on the port 1234?
and when i try a telnet on another port like that: telnet 10.10.10.10 1235 i get: Trying 10.10.10.10 ...
in this case this
2/ does this mean that the firewall is blocking the traffic between my host and the 10.10.10.10 on the port 1235?
I am running CentOS 5.1 on VMware on Win 7 On CentOS I added Bridged network adapter and the server is connected to internet without any problems, but when I telnet any server on port 25 I get connection timeout.
Code:
telnet f.mx.mail.yahoo.com 25
Trying 98.137.54.237...
telnet: connect to address 98.137.54.237: Connection timed out
telnet: Unable to connect to remote host: Connection timed out
I stopped all servers, iptables and sendmail on the linux server and the firewalls on the win 7 but still getting the same error! I added new network adapter ( host-only ) and tried to telnet the win machine from vmware Linux but I got connection refused
Code:
telnet 192.168.71.1 25
Trying 192.168.71.1...
telnet: connect to address 192.168.71.1: Connection refused
telnet: Unable to connect to remote host: Connection refused
[code]....
When i am trying to telnet to a machine connected in our LAN ..
telnet: Unable to connect to remote host: Connection refused
What's the reason for this? how do i establish a connection? I am using ubuntu 10.04.
I did followings:
Code:
But got:
Code:
But as I tried:
Code:
It's OK.
I'm trying to make an SSH script for my place of employment. This script, I want to go out to the server hostnames we have specified (in another file) and change a users account password. We use Kerberized telnet, so if telnet root hostname fails, I want it to use ssh username hostname and use the old password (specified). If both fail, I want it to ask the user what the port should be and input the port in the ssh command.
But I'm having a issue having it try telnet root hostname and if it fails then, try to ssh in, I have no clue how to have it proceed. Is it an if statement? Here's the telnet failed message: telnet: Unable to connect to remote host: Connection refused
I am using TomCat6 with Ubuntu Server 9.10 x64. I successfully configured to iptables to redirect the port "443" to "8443" (Tomcat SSL), using this command:
[code]...
telnet localhost the output is...
Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
telnet: Unable to connect to remote host: Connection refused
I don't understand what is the problem. Its not configured properly how do i configure it?
I'm trying to connect with my server via telnet, but when i sent the command (telnet xxx.xxx.xxx.xxx Port) doesn't works and shows then follow error: Unable to connect to remote host: Connection refused, It happens with any port. Is strange but my telnet services works (telnet xxx.xxx.xxx.xxx), In addition, i tried with firewall enabled and disabled and the problem still happens. My centOS run on virtualbox.
View 3 Replies View Relatedlpr: can't connect to remote host (127.0.0.1): Connection refused
[root@l-GZ:/]# usb 1-1: new full speed USB device using sl811-hcd and address 3
I can telnet (while on the actual machine) using
Quote:
telnet localhost 25
When I try and use the local machine's ip
Quote:
telnet 192.168.100.9 25
I get
Quote:
Trying 192.168.100.9...
telnet: Unable to connect to remote host: Connection refused
[Code].....
This last one is strange as I the IP looks odd.
What I am doing wrong, and how do I fix it. After much surfing many mosts say that telnet is not used anymore but I want to use it to test my smtp server.
I have my desktop computer (running F13) configured to accept ssh over port 22 via the firewall configuration tool. If I type ifconfig -a, this computer, which is running on my wireless network, tells me:
Code:
inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0
However, if I go to my laptop computer (also running F13) and try and ssh into the desktop, i.e. ssh icthy@192.168.1.100, I get this response:
Code:
ssh: connect to host 192.168.1.100 port 22: Connection refused.
I guess I am confused to what is blocking the connection? Is there another means on F13 other than the default Firewall? I haven't really messed with the network at all. For what it's worth, I am hoping to set things up so I can just ssh into the computer name, (ssh icthy@desktop) eventually, but want to start with the IP. So, can anyone offer a hint as to what I can look for that is blocking port 22?
I am facing an error when I run the following command telnet localhost 7777
Trying ::1...
telnet: connect to address ::1: Connection refused
Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
I want to create script wherein it will check the application if its running. The command that I'll be using to check the application is telnet (if you can recommend others, that's ok). I've an application and it is listening to port 1808. If I do telnet localhost 1808, the response is :
Code:
[root@test ~]# telnet localhost 1808
Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
What I want to happen is if the response is like to code above, it will execute a commands. Obviously, above code knows that the application is not working so I need to execute a commands. I created a script before using expect but I don't think it will work because I haven't establish a shell yet unlike successful telnet I could spawn expect.
I did a clean install of the latest version of Ubuntu. For some reason, there are still internet-issues. When I tried out the following command
Code:
telnet
open ftp.microsoft.com 21
I got
Code:
telnet: Unable to connect to remote host: Connection timed out
Also, during install of the new ubuntu, it was unable to reach the repos for downloading. Odd thing is that I can go online, and that when I type 'ftp.microsoft.com' in my browser, it displays the file-hierarchy.
When I do a ntpq -p on my machine I could see the ntp servers configured and it's status:
But when I telnet to ntp server "10.1.35.2" it says A remote host refused an attempted connect operation:
I know * here represents that the machine is in sync with ntp server. My question if the machine is in sync with ntp server, how does it work?why ntp port 123 is connection refused?
I am getting this error message on ktorrent on slackware 13.1 64. Few days ago I was using ktorrent for torrent downloads and it was fine, but not i can't star any download or any kind of torrent, it just keeps returning the error and it's not working at all.
View 1 Replies View RelatedI cannot use GRsync from Ubuntu Desktop to PCLinuxOS laptop.The 2 computers can ping each other. I have disabled both firewalls. My laptop IP address is 192.168.1.11This is the error on Ubuntu Grsync:
ssh: connect to host 192.168.1.11 port 22: Connection refused
rsync: connection unexpectedly closed (0 bytes received so far) [sender]
rsync error: error in rsync protocol data stream (code 12) at io.c(601) [sender=3.0.7]
Rsync process exit status: 12
On PCLinuxOS it wont say Ethernet is connected when trying a static address setup.However it does connect to the internet via auto Ethernet setup and a LAN cable. It then says connected. In order to use SSH and GRsync what programs are required? I have these installed on both machines: grsync openssh-client openssh-server
I am facing trouble to scp from server to to my local machine where as the vice-vesra is working fine.
The error is like below.
lost connection
I have become convinced that rsync for CentOS 5 is broken. I'm trying to set up automatic backups between 2 servers in 2 different countries using rsync under CentOS 5.I can get manual backups to work between the 2 servers by doing two things I shouldn't need to do, but automatic backups fail and I see no solution.Here are the problems I am encountering: According to the instructions I've read everywhere, I am to set up two configuration files:
/etc/rsyncd.conf
/etc/rsyncd.secrets
When I run rsync from root, it apparently just totally ignores these two files. No custom greeting, no log, no password used.
Even when I specify --password-file=/etc/rsyncd.secrets in the command line, it still ignores it. I am prompted and I must enter the password manually. Let me back up a moment. After first installing rsync, when I ran any command to access the root server, I get this error:
ssh: connect to host 111.222.33.44 port 22: Connection refused
rsync: connection unexpectedly closed (0 bytes received so far) [sender]
rsync error: unexplained error (code 255) at io.c(463) [sender=2.6.8]
I read everywhere that rsync uses port 873, not port 22 which is used for SSH. Why is rsync on CentOS trying to use port 22?I have SSH switched from port 22 to another port (let's call it 5432 here) and block port 22.So, I have added this to the command line:
--rsh='ssh -p5432'
Then I get a connection ...
... but it prompts me for my password. It doesn't matter that I have my username and password, same one, in /etc/rsyncd.secrets on both servers. It still asks.And it rejects my password!The only way I can get it to connect is by creating an SSH user on the remote server for this.Even then, rsync STILL prompts me for a password, even though:
1. the username and password are specified in the /etc/rsyncd.secrets files on both servers
2. I've added the command line parameter --password-file=/etc/rsyncd.secrets Therefore, it is totally impossible to use an any cron job or other automatic synchronization, under CentOS 5.
rsync -av --password-file=/etc/rsyncd.secrets --rsh='ssh -p5432' sourcefiles* rsyncusername@111.222.33.44:httpdocs/rsync
rsync -av --password-file=/etc/rsyncd.secrets --rsh='ssh -p5432' sourcefiles* 111.222.33.44:httpdocs/rsync
rsync -av --verbose --progress --stats --password-file=/etc/rsyncd.secrets --rsh='ssh -p5432' sourcefiles* rsyncusername@111.222.33.44:httpdocs/rsync
Yes, I have made sure that I have the latest rsync. I have run yum update for everything.Yes, I have double checked, triple checked, and quadruple checked my config files.
I am getting "ssh:connect to host restart port 22: Connection refused" error when trying to start "ssh" in Ubuntu. I uncommented the port 22 in ssh_config, I dont have iptables setup...Did try to check if the port is listening using the netstat -an | grep "LISTEN" & couldnt find.
View 9 Replies View RelatedI'm having problems with ssh and don't know what else to do. I keep getting "ssh: connect to host stop port 22: Connection refused" when i try to stop or start ssh:
[Code]....
I am getting "ssh:connect to host restart port 22: Connection refused" error when trying to start "ssh" in Ubuntu. I uncommented the port 22 in ssh_config, I dont have iptables setup...Did try to check if the port is listening using the netstat -an | grep "LISTEN" & couldnt find.
View 14 Replies View RelatedI have installed ubuntu 11.04 and I'm now trying to connect to existing SUSE servers on the LAN. My home directory has a shared NFS mounted home on the SUSE servers while my home on the ubuntu machine is local. I can log in using ssh to all the SUSE servers except one. I get:
ssh: connect to host srv3 port 22: Connection refused
If I use the IP address of srv3 directly it works. Also, before I changed the default machine name ("ubuntu") I could log into srv3.
nslookup srv3 works OK.
ping srv3 works OK.
Even if I completely delete the .ssh directory in both my ubuntu home and in my shared home on the SUSE servers I still cannot log in using the srv3 name, only direct IP address works. I'm thinking that the login I did to srv3 before I changed the machine name for the ububtu machine must have goofed up something
I have a new Ubuntu server (10.10), named Denholm, recently installed and updated. I came in this morning, attempted to add a package with apt-get, and got a "Connection refused" response. I have another server (also 10.10), named Moss, on the same network that can connect successfully.
Here's what I've found/tried so far:
This doesn't look like and apt problem anyway, but the sources.list files on Denholm and Moss are identical.
I can ping [URL] (and other sites) successfully from Denholm.
I have tried 'wget www.google.com'. From Moss the wget is successful, but from Denholm I get "Connection refused."
I have a web server on Moss and Denholm can successfully access it.
To the best of my knowledge, Denholm is not configured to use a proxy server (no http_proxy variable set).
When I was checking the /var/log/messages, I found these entries:
Mar 16 15:14:38 localhost smbd[13347]: [2010/03/16 15:14:38, 0] printing/print_cups.c:cups_connect(78)
Mar 16 15:14:38 localhost smbd[13347]: Unable to connect to CUPS server localhost:631 - Connection refused
Mar 16 15:24:38 localhost smbd[13691]: [2010/03/16 15:24:38, 0] printing/print_cups.c:cups_connect(78)
Mar 16 15:24:38 localhost smbd[13691]: Unable to connect to CUPS server localhost:631 - Connection refused
Mar 16 15:24:38 localhost smbd[13692]: [2010/03/16 15:24:38, 0] printing/print_cups.c:cups_connect(78)
Mar 16 15:24:38 localhost smbd[13692]: Unable to connect to CUPS server localhost:631 - Connection refused
Mar 16 15:27:34 localhost smbd[13716]: [2010/03/16 15:27:34, 0] printing/print_cups.c:cups_connect(78)
Mar 16 15:27:34 localhost smbd[13716]: Unable to connect to CUPS server localhost:631 - Connection refused
Mar 16 15:27:34 localhost smbd[13718]: [2010/03/16 15:27:34, 0] printing/print_cups.c:cups_connect(78)
Mar 16 15:27:34 localhost smbd[13718]: Unable to connect to CUPS server localhost:631 - Connection refused
CUPS is stopped in the system and the system is configured as samba server. What could be the reason for these printing requests from smbd?
I have CENTOS 5.4 Installed in one machine and i used Real IP provided by our ISP.My requirements for Mailserver are:
Dovecot
Postfix
everythings done but when i tried to telnet my External IP it giving me an error of telnet connection refused but i can able to ssh to my external IP and also i disabled the firewall but still no luck.
Ok, a bit of a backround. I am a recent Ubuntu user and made the switch to Fedora being utilized as a server. I am trying to move to a new MUD(text based D&D type game) codebaseI have gotten my code compiled and executed the startup script. The process shows in the ps ux list. As the game it set up it uses port 7500. As the script running I get a "Connection Refused" error when trying to telnet to port 7500. Upon using nmap, I show only my SSH port open (the only daemon I have installed currently) yet no port 7500 open.
I believe this to be an issue somewhere in Fedora as I've had no issue on Ubuntu with past MUD codebases.I have disabled the firewall within Fedora and still no luck. Please bare with me as I'm new to fedora's intricacies.Short Story for those that hate reading long winded posts: A port that should be open by acript known to work on other distro's doesn't seem to open the called port using Fedora
I have an application that uses a telnet console, and I have an autostart script to start it (and check that it is running).The problem is that if the program is not startet by root, or by using sudo, I cant get access to the telnet console, it just says "connection refused".The application works fine, but I cant acces its console, so I have to shut it down, and then restart it with sudo to be able to log in to it.Anyone know how to make the script start the application with enough rights?
View 1 Replies View Related