Ubuntu Servers :: Smbd. Failed To Connect To Socket?

Nov 21, 2010

I have a new install of Ubuntu 10.04.1 LTS server. But I get errormessages trying to start samba.

caesar@klem:/etc/samba$ restart smbd
restart: Unable to connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory

I have tride to remove an install samba. And deleted smb.conf. And startet with the original.

smb.conf:
workgroup = Easyways
server string = %h server (Samba, Ubuntu)
log file = /var/log/samba/log.%m
max log size = 1000

[Code]....

View 2 Replies


ADVERTISEMENT

Ubuntu Servers :: Unable To Connect To System Bus: Failed To Connect To Socket

May 29, 2010

I tried to install vsftpd on my server and while the installation went fine, I can't run

Code:
restart vsftpd
As I the get error
Code:

restart: Unable to connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory Though I'm able to restart the service with

sudo /etc/init.d/vsftpd restart with a warning telling me to use the service utility. Not only that, but despite the port being open it won't allow me to log in, it just hangs, and I have local users enabled (I've used the default .conf file). Does dbus not come installed in 10.04, and if I did install it would it make a difference for restarting the service? Are there further steps needed not available in the tutorial on the Ubuntu Server Guide for 10.04 to enabling local user authentication? -edit- Figured it out, dbus wasn't installed, vsftpd is working fine now.

View 4 Replies View Related

Fedora Servers :: Getting Error Message When Trying To Connect To Vncserver 'unable Connect To Socket: No Route To Host (113)'

Apr 26, 2011

I install and configure the vncserver following and reading 1000papers, but all of this present the same problem; when i try to connect to my vncserver,recive this mesage: unable connect to socket: No route to host (113) The OS version is Fedora Core 14 and tigervnc-server i try different solutions including:Allow TCP connection modifing files /etc/gdm/custom.conf and /usr/share/gdm/gdm.chemas Disable SELinux removing iptables Here follow the vncserver configuration:

[code].....

The ip address of the vncserver is correct because i can do ssh on it. Where or what can i do?

View 4 Replies View Related

Ubuntu Servers :: SSH Error: Read From Socket Failed: Connection Reset By Peer?

Dec 8, 2010

figure out this error?

Code:
kradalby@hpcompaq6530b-laptop ~/.ssh $ ssh -vvv -p 110 kradalby@dfekt.no
OpenSSH_5.5p1 Debian-5+b1, OpenSSL 0.9.8o 01 Jun 2010

[code]....

View 3 Replies View Related

Fedora Servers :: OpenVPN - Socket Bind Failed On Local Address

May 4, 2011

I finally got the certs to configure:
openvpn --config server.conf
Tue May 3 17:26:27 2011 OpenVPN 2.1.1 i686-redhat-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] built on Jan 5 2010
Tue May 3 17:26:27 2011 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Tue May 3 17:26:27 2011 Diffie-Hellman initialized with 1024 bit key
Tue May 3 17:26:27 2011 TLS-Auth MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
Tue May 3 17:26:27 2011 ROUTE default_gateway=192.168.122.1
Tue May 3 17:26:27 2011 TUN/TAP device tun0 opened
Tue May 3 17:26:27 2011 TUN/TAP TX queue length set to 100
Tue May 3 17:26:27 2011 /sbin/ip link set dev tun0 up mtu 1500
Tue May 3 17:26:27 2011 /sbin/ip addr add dev tun0 local 10.8.0.1 peer 10.8.0.2
Tue May 3 17:26:27 2011 /sbin/ip route add 10.8.0.0/24 via 10.8.0.2
Tue May 3 17:26:27 2011 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
Tue May 3 17:26:27 2011 Socket Buffers: R=[114688->131072] S=[114688->131072]
Tue May 3 17:26:27 2011 UDPv4 link local (bound): [undef]:1194
Tue May 3 17:26:27 2011 UDPv4 link remote: [undef]
Tue May 3 17:26:27 2011 MULTI: multi_init called, r=256 v=256
Tue May 3 17:26:27 2011 IFCONFIG POOL: base=10.8.0.4 size=62
Tue May 3 17:26:27 2011 IFCONFIG POOL LIST
Tue May 3 17:26:27 2011 Initialization Sequence Completed

But openvpn still won't start; where to go from here.
Tue May 3 17:54:25 2011 TCP/UDP: Socket bind failed on local address 192.168.122.3:1194: Address already in use
Tue May 3 17:54:25 2011 Exiting

View 3 Replies View Related

Server :: Smbd Bind To Port 139 Failed?

Jun 15, 2011

I have just installed Debian 6.0.1 base install, for the use of a file server. I installed samba using apt-get and am using: smbd version 3.5.6

Here is my smb.conf file. Very basic, which by the way, seems OK according to the output of testparm.

Code:
[global]
log level = 3
workgroup = INERT
wins support = yes
[test]

[Code]....

I don't understand why smbd is not reportedly binding to IPv4 ports.

View 1 Replies View Related

Ubuntu Servers :: ERROR 2002 (HY000): Can't Connect To Local MySQL Through Socket

Apr 2, 2011

ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2). I've had this problem to the point where I thought I messed up my actual configuration so bad that I reinstalled Ubuntu to get rid of all the MySQL configuration; I ran MySQL through Windows with a breeze, but I'm getting some errors like that after restarting my computer just a few minutes ago and I have not changed anything in my SQL settings. I'm on Ubuntu 10.10 64 bit and running MySQL 5.1. the actual error that I get from Navicat and from the website is at [URL]... Update: 20110402. Connection for controluser as defined in your configuration failed. Just got that when I tried to log in to phpmyadmin.

View 4 Replies View Related

Ubuntu Servers :: Nmbd Does Not Start But Smbd Starts

Jan 14, 2011

The time the server smbd and nmbd functioned normally but when I restart the service he returned smbd nmbd not normal but when I try to start it the following error occurs:

Code:
service nmbd start
start: Job failed to start
service nmbd status
nmbd stop/waiting

[Code]....

View 4 Replies View Related

Ubuntu Servers :: Can't Connect To Local MySql Through Socket '/var/run/mysqld/mysqld.sock' (2)

Apr 18, 2011

installing mysql server manually. i have successfully installed mysql server but when i am try to create database, it shows error like this

ERROR 2002 (HY000): Can't connect to local MySql server through socket '/var/run/mysqld/mysqld.sock' (2)

** mysqld is not available in /var/run and error log file is also not available in /var/log **

View 5 Replies View Related

Ubuntu Servers :: Error: 'Can't Connect To Local MySQL Server Through Socket '/var/run/mysqld/mysqld.sock' (2)

Apr 10, 2010

After the upgrade from 8.10 to 9.04, all was well. But after the upgrade from 9.04 to 9.10, I lost the MySQL server. Now, I recall during the upgrade, I was asked if I wanted to keep the existing my.cnf file or replace it with a newer one. I did as suggested and kept the original as I had edited it before. The same question was asked with a couple other config files. I kept the original in each case. After the first step, I checked the server was running and the websites were up, all was well. After the update to 9.10, when I checked the server, I get the following error:

Code: error: 'Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)' Check that mysqld is running and that the socket: '/var/run/mysqld/mysqld.sock' exists! Can anyone point me in the right direction to getting this resolved?

View 2 Replies View Related

Ubuntu Servers :: Smbd Not Running - Reinstall It But Still Giving The Erroneous (?) Status Message ?

Feb 3, 2010

Here's the background info -- I recently installed Ubuntu server 8.04 on TWO machines that are exactly identical.On one machine, all seems perfect.On the other, when I execute "/etc/init.d/samba status" it always shows that smbd is NOT running.But it would seem that it IS running, since I can access the shares I've set up without difficulty either from smbclient on the server or from the windows boxes on the network.ps ax lists smbd as a process as well.The log tells me nothing -- it just reports that samba started. No errors. Not much of anything in there. And if I execute smbstatus, that works just like you'd expect.since the two machines are identical (and I mean exactly the same), and only one is doing this.

I guess I should be happy since they both work (seemingly perfectly).But it still bothers me that I'm getting the message that smbd isn't running on one of them. I tried uninstalling samba and reinstalling it on the machine giving me the erroneous (?) status message. But that changed nothing.Right now there's no data on the machine, and it's not in production, so just doing a bare metal reinstall of the OS is an option. But I'd like to understand what's happening.

View 5 Replies View Related

Ubuntu Servers :: Samba Shares Folders But Not Printers Until Restart The Smbd Service?

Jul 18, 2010

Just like the title states, as soon as my server comes up, I see the samba share that I made and can browse it just fine.

I don't see the printer share nor can I print to the shared printer until I execute service smbd restart from an ssh login. Then I see the printer and then I can network print.

Before restarting smbd, I do check to see if it's already running and it is (two instances are running in fact). When I restart smbd, there are still two smbd services running but they have higher PID numbers (and I can then print).

I'm running 10.04. how to make it all start up happily the first time without any intervention from me?

View 2 Replies View Related

Ubuntu Servers :: Upgrading From Mysql5.1 To Mysql5.5 - Get An Error :2002 : Can't Connect To Local MySQL Server Through Socket ?

Apr 28, 2011

how to upgrade from mysql5.1 to mysql5.5 version. Pls guide me in briefly.I did upgrade with the help of this url

http://www.ovaistariq.net/490/a-step...-to-mysql-5-5/ but i got error like this error:2002: Can't connect to local MySQL server through socket '/tmp/mysql.sock' (2) when trying to connect FATAL ERROR: Upgrade failed

In /etc/my.cnf , i didnt get like this. Is this is the error
user = mysql; socket = /var/run/mysqld/mysqld.sock; port = 3306; basedir = /usr/local/mysql; datadir = /usr/local/mysql/data; tmpdir = /tmp; log_error = /var/log/mysql/error.log

View 1 Replies View Related

Ubuntu Servers :: ERROR 2002 (HY000): Can't Connect To Local MySQL Server Through Socket '/var/run/mysqld/mysqld.sock' (2)

Feb 27, 2011

I'm the lead Dev of GnackTrack and we're having issues with running MySQL on the LiveDVD.Once installed everything works fine, mysql can be connected to but when using the liveDVD we get the following error:

Code:

root@root:~# mysql
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
Contents of /etc/mysql/my.cf point to /var/run/mysqld/mysqld.sock but because this is a liveDVD the actual file is located in:
/rofs/var/run/mysqld/mysqld.sock

[code].....

View 4 Replies View Related

Ubuntu :: Failed To Create UDP Socket (SIP) On Port 5060 Address

Mar 13, 2010

I can't seem to get on my Twinkle SIP Phone, it says: "Failed to create a UDP Socket (SIP) on port 5060 Address already in use" after that message it brings me back to the window were I'm supposed to run my profile, how do I fix this?

View 6 Replies View Related

Ubuntu :: 10.04: Can't Connect To MySQL Through Socket?

Dec 22, 2010

I am in the process of installing a genome brower on an ubuntu 10.04 (lucid). I achieved to see the browser once. Then, the mysql.sock disappeared and to solve this I tried first, to reboot the server with no results. Then I removed and reinstalled the MySQL server installing mysql-server-5.1. Now, I have a socket and MySQL is running (checked these out) but when I try to see the browser that is what I obtain:

Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (13)

View 1 Replies View Related

Networking :: Broadcast Packets Failed To Receive - Socket Beginner

Feb 24, 2011

I am working on uClinux/almost same as Linux. I am new to socket programming. I have two micro controllers running on same code. Simple run with arguments mean send merged string.
run 1st micro controller (Send): ./Name "anystring"
run 2st micro controller (Recive):/Name

My code is:
int receive() {
// Create socket
int sock_fd;
struct sockaddr_in addr;
char buffer[kBufferSize];
int bytes_received=0;
int addr_len = sizeof(addr);
printf("receive start ");
sock_fd = socket(AF_INET, SOCK_DGRAM, 0);
if ( sock_fd == -1 ) {
printf("receive Create ");
// Error occurred return 0; }
printf("Res Create sucee ");
// Create address from which we want to receive, and bind it
memset(&addr, 0, sizeof(addr));
addr.sin_family = AF_INET;
addr.sin_addr.s_addr = INADDR_ANY;
addr.sin_port = htons(kPortNumber);
if ( bind(sock_fd, (struct sockaddr*)&addr, sizeof(addr)) < 0 ) {
printf("receive bind "); // Error occurred return 0; }
printf("Bind Succeful sucee ");
while ( 1 ) {
// Receive a message, waiting if there's nothing there yet
bytes_received = recvfrom(sock_fd, buffer, kBufferSize-0, 0,
(struct sockaddr*)&addr, &addr_len);
if ( bytes_received < 0 ) { // Error occurred
printf("receive bytes "); return 0; }
printf(" bytes_received succeful ");
printf("Ressocketstring : %s ",buffer);
memset(Ressocketstring,0x00 , sizeof(Ressocketstring));
strcpy(buffer,Ressocketstring); printf("Ressocketstring : %s
",Ressocketstring); printf(" ");
printf("Hello Receive finished");
// Now we have bytes_received bytes of data in buffer. Print it!
fwrite(buffer, sizeof(char), bytes_received, stdout); } }
int transmit(char * data, int length) {
int sock_fds[kMaxSockets];
// Obtain list of all network interfaces
/* struct ifaddrs *addrs;
if ( getifaddrs(&addrs) < 0 ) {
// Error occurred return 0; } */
// Loop through interfaces, selecting those AF_INET devices that support broadcast, but aren't loopback or point-to-point
struct sockaddr_in addr; int number_sockets = 0; struct hostent *he;
/* const struct ifaddrs *cursor = addrs;
while ( cursor != NULL && number_sockets < kMaxSockets ) {
if ( cursor->ifa_addr->sa_family == AF_INET
&& !(cursor->ifa_flags & IFF_LOOPBACK)
&& !(cursor->ifa_flags & IFF_POINTOPOINT)
&& (cursor->ifa_flags & IFF_BROADCAST) ) {
// Create socket*/
sock_fds[number_sockets] = socket(AF_INET, SOCK_DGRAM, 0);
if ( sock_fds[number_sockets] == -1 ) // Error occurred {
printf("Error Create "); return 0; }
he = gethostbyname((char *)BCASTADDRESS) ;
if (he==NULL ) {printf("Error gethostbyname ");
herror("gethostbyname"); printf("Error host "); exit(1);
} printf("Res He ");
// Create address from which we want to send, and bind it
memset(&addr, 0, sizeof(addr)); addr.sin_family = AF_INET;
addr.sin_addr = *((struct in_addr *)he->h_addr);//((struct sockaddr_in *)cursor->ifa_addr)->sin_addr; addr.sin_port = htons(kPortNumber);
if ( bind(sock_fds[number_sockets], (struct sockaddr*)&addr, sizeof(addr)) < 0 )
{ // Error occurred printf("Error bind "); return 0; }
// Enable broadcast int flag = 1;
if ( setsockopt(sock_fds[number_sockets], SOL_SOCKET, SO_BROADCAST, &flag, sizeof(flag)) != 0 ) // Err occur { printf("Error Enable "); return 0; }
number_sockets =1; printf("Succes 1 "); printf("transmit Create ");
// Initialise broadcast address memset(&addr, 0, sizeof(addr));
addr.sin_family = AF_INET; addr.sin_addr.s_addr = INADDR_BROADCAST;
addr.sin_port = htons(kPortNumber);
// Send through each interface int i;
for ( i=0; i<number_sockets; i++ ) {
if ( sendto(sock_fds[i], data, length, 0, (struct sockaddr*)&addr, sizeof(addr)) < 0 )
{ printf("Error Send "); // Error occurred return 0;
} printf("Succes 2 "); } return 1; } void MergeMessage( ) {
memset(socketstring,0x00,sizeof(socketstring));
sprintf(socketstring,"%s@%s@%s@%s@%s@%s@%s@%s@%s@%s@%s
",Tmeg.s1,Tmeg.s2,Tmeg.s3,Tmeg.s4,Tmeg.s5,Tm eg.s6,Tmeg.s7,Tmeg.s8,Tmeg.s9,Tmeg.s10,Tmeg.s11);
printf(" MergeSocketMessage : %s ",socketstring); }
int main (int argc, char** argv) {
int fd=0,bdc=0; struct ifreq ifr; printf("Tsarting man ");
fd = socket(AF_INET, SOCK_DGRAM, 0);
strncpy(ifr.ifr_name, "eth0", IFNAMSIZ-1);
ioctl(fd, SIOCGIFADDR, &ifr); close(fd);
memset(MYIP,'-',sizeof(MYIP));
memset(BCASTADDRESS,'-',sizeof(BCASTADDRESS));
strcpy(MYIP, inet_ntoa(((struct sockaddr_in *)&ifr.ifr_addr)->sin_addr));
printf("Etho: %s ,len:%d ", MYIP,strlen(MYIP));
for(bdc=strlen(MYIP);MYIP[bdc-1]!='.';bdc--) {}
strncpy(BCASTADDRESS,MYIP,bdc-1); strcat(BCASTADDRESS,".255");
printf("BCASTADDRESS: %s ,len:%d
", BCASTADDRESS,strlen(BCASTADDRESS));
printf("Initial Broad Cast message "); {
/*s0"0" (id=76)
s1"500" (id=77)s2"100" (id=78)s3"100" (id=78)s4"startVD" (id=79)
s5"lighting" (id=80)s6"reading" (id=81)s7"Anna" (id=82)s8"0" (id=76)
s9"";s10"" (id=64)s11"" (id=64)*/
strcpy(Tmeg.s0,"0"); strcpy(Tmeg.s1,"500");strcpy(Tmeg.s2,"100");strcpy(Tmeg.s3,"100");
strcpy(Tmeg.s4,"startvd");strcpy(Tmeg.s5,"lighting");strcpy(Tmeg.s6,"reading");
strcpy(Tmeg.s7,"anna");strcpy(Tmeg.s8,"0"); }
MergeMessage (Tmeg); if( strlen(argv[1]) ) {
//strcpy(socketstring,Tmeg,sizeof(Tmeg));
if(transmit(socketstring, strlen(socketstring) ) ) {
printf(""%s" transmitted. ", socketstring); } else {
printf("Error occurred: %s ", strerror(errno)); return 1; } }
else { for( ; ; ) {
if ( argc < 2 ) // No argument: Just listen {
printf("Listening... "); if ( !receive() ) {
printf("Error occurred: %s ", strerror(errno)); return 1;
} return 0; } } } printf("Finished "); return 0;
} //////////////// .h file is /////////////
//#define WIN32_LEAN_AND_MEAN// Exclude rarely-used stuff from Windows headers
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <arpa/inet.h>
#include <net/if.h>
#include <fcntl.h>
#include <netdb.h>
#include <signal.h>
#include <sys/wait.h>
#include <sys/ioctl.h>
#define SubLen50
//#include <ifaddrs.h>
#include <errno.h>
char MYIP[20];
char BCASTADDRESS[20];
typedef struct {
char s0[SubLen];
char s1[SubLen];
char s2[SubLen];
char s3[SubLen];
char s4[SubLen];
char s5[SubLen];
char s6[SubLen];
char s7[SubLen];
char s8[SubLen];
char s9[SubLen];
char s10[SubLen];
char s11[SubLen];
}msg_struct;
msg_struct Sendmsg;
msg_struct Tmeg; //Recivemsg;
Boolean pri[6];
char socketstring[SubLen*12];
char Ressocketstring[SubLen*12];
int kBufferSize = (SubLen*12);

View 2 Replies View Related

Ubuntu Multimedia :: Mplayer: Could Not Connect To Socket

Feb 4, 2010

The DVD is mounted. From the console, I input "mplayer dvd://", and I receive the following output:

MPlayer SVN-r29237-4.4.1 (C) 2000-2009 MPlayer Team
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.

[code].....

View 2 Replies View Related

Software :: MPlayer - Could Not Connect To Socket

Oct 11, 2010

So I'm trying to watch .rmvb thats why I got MPlayer.

This is what it says when I try running it from the terminal:
gondee@gondee:~$ gmplayer
MPlayer 1.0rc2-4.2.3 (C) 2000-2007 MPlayer Team
CPU: Intel(R) Atom(TM) CPU N270 @ 1.60GHz (Family: 6, Model: 28, Stepping: 2)
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE SSE2
xscreensaver_disable: Could not find XScreenSaver window.
GNOME screensaver disabled
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.

It then pops up 2 screens a black and a gray. I can't close them and they're frozen.

View 3 Replies View Related

Ubuntu Installation :: Cannot Connect To Local MySQL Server Through Socket

Apr 2, 2010

When I type mysql,
vignesh@vignesh:~$ mysql

I get this error.
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)

So, I checked whether the file mysqld.sock is there in its respective folder, but I could not find that file. How to create the file and start mysql server.

View 1 Replies View Related

Ubuntu :: Can't Connect To Local MySQL Server Through Socket / Make It Possible?

May 23, 2010

I'm pretty new to Linux and this is my first post here.

Whenever I try to connect to MySQL, I get the following message:

ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)

It worked just fine the other day, then are I ran some updates and setup port forwarding to this computer [Ubuntu Server 10.04 LTS].

View 1 Replies View Related

Networking :: Connect To A Remote Machine Using Tcp Socket?

Mar 2, 2010

#server.pl
use IO::Socket;
$| = 1;
$socket = new IO::Socket::INET (
LocalHost => '10.100.207.13',
LocalPort => '5000',
code....

it displays the message "couldn't connect to the server". How can i connect to the remote machine using tcp socket?

View 3 Replies View Related

Networking :: Mysql Cannot Connect Socket But Fine Through TCP/IP?

Jul 29, 2010

I'm using mysql server through tcp/ip with no problem. But I don't know since when I'm not able to connect through socket. There are lots of topics but my bad I couldn't find one works for me.

OS: Ubuntu 9.04
mysql 5.0.75-0ubuntu10.5

my.cnf

Quote:

[mysqld]
user = mysql
socket = /var/run/mysqld/mysqld.sock
skip-name-resolve
safe-show-database
code....

/var/run/mysqld/mysqld.sock socket exists and has chmod 777
Error:

Code:
ERROR 2002 (HY000): Can't connect to local MySQL server through socket 'localhost' (2)

View 3 Replies View Related

Red Hat / Fedora :: Can't Connect To Local MySQL Server Through Socket

Jul 4, 2010

I'm using fedora 13(x86_64).i got an error message while starting the mysql database software through the kernel. Code: [pradeep@localhost ~]$ mysql ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2) [pradeep@localhost ~]$ this is the first time i'm using the mysql in linux environment. do i have to configure anything before using it for the first time ?!

View 5 Replies View Related

Networking :: Socket Programming - Connect To Port Y On IP X With Telnet

Sep 16, 2010

I have a customer who is complaining that they can connect to prt y on IP x with telnet. They are seeing the following:

telnet x.x.x.x y
Trying x.x.x.x...
Connected to x.x.x.x.
Escape character is '^]'.

after some time the connection of course times out. Connection closed by foreign host. There is no telnet service running on this port so they cannot do anything, but they are complaining tht the fact that telnet "connects" is a security risk. I am having difficulty explaining why they are able to connect with telnet. I know it has to do with the socket layer API in Linux but I am having difficulty explaining this sufficiently. I also can't just say "this is the way linux works" to them. I am looking through "UNIX Network Programming" by W.

View 3 Replies View Related

General :: Can't Connect To Local Mysql Server Through Socket?

Aug 8, 2011

i am new member for this forum, i am doing copy data from virtualbox A centos machine to virtualbox B centos machine.first step i use mysqldump database xxx > xxx.sqlthan send to B machine by scp xxx.sql @B machine IP /root.but come to third step, the xxx.sql need import to B machine mysql database,the error occur again:# can't connect to local mysql server through socket 'opt/lampp/lampp/mysql/mysql.socki really dun know how to solve it, use almost 3 hour cannot do solve it,but i use win scp check the folder, i found mysql.sock is no at the /opt/lampp/lampp/mysql/mysql.sock but at/opt/lampp/var/mysql/mysql.socpi dun know how to continue it, i hope those centos user help me to overcomethe issue. thank you very much!centos version 5.5, xampp version 1.4

View 3 Replies View Related

General :: Can't Connect To Local MySQL Server Through Socket

Jun 18, 2010

ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)

following my.cnf setting why this error is coming

#BEGIN CONFIG INFO
#DESCR: 4GB RAM, InnoDB only, ACID, few connections, heavy queries
#TYPE: SYSTEM
#END CONFIG INFO

[Code].....

View 8 Replies View Related

Software :: Cannot Connect To Local MySQL Server Through Socket

Apr 26, 2010

I some how installed mysql-5.1.46 (I believe I have installed) When I start mysql I am getting error:
[root@501 ~]# mysql
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/tmp/mysql.sock' (2)

Then when I restart:
[root@501 ~]# /etc/init.d/mysql restart
ERROR! MySQL manager or server PID file could not be found!
Starting MySQL. ERROR! Manager of pid-file quit without updating file.

Then I tried to safe start mysql :
[root@501 ~]# mysqld_safe
100426 21:36:49 mysqld_safe Logging to '/usr/local/mysql/data/501.training.com.err'.
100426 21:36:49 mysqld_safe Starting mysqld daemon with databases from /usr/local/mysql/data
100426 21:36:49 mysqld_safe mysqld from pid file /usr/local/mysql/data/501.training.com.pid ended .....

View 2 Replies View Related

Red Hat :: Error 'Can't Connect To Local MySQL Server Through Socket'

Feb 28, 2011

when i tried the command mysql -u root it is giving me an error that "Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock'(2)" although my mysql server is ruuning beacuse i m using XAMMP server and its inbuild mysql server is running i cannot use service mysqld start command beacuse this command try to start another instance of mysql and i required mysql of XAMMP.

View 3 Replies View Related

CentOS 5 :: Cannot Connect To Local MySQL Server Through Socket

Apr 26, 2010

During the boot of CentOs I see this message which never stops scrolling during all the boot :
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock'

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved