I'm trying to connect to url, but the browser is unable to connect to the localhost; my OS is F11, if someone have encounter this problem? i was able to connect to the localhost when i had F6 OS.?
View 3 Repliesiam not able to connect localhost in mysql.i uswd command for mysql is
#mysqladmin -u root -h localhost password "123456"
ErroR:-
mysqladmin: connect to server at 'localhost' failed
error: 'Access denied for user 'root'@'localhost' (using password: NO)'
I install and configure the vncserver following and reading 1000papers, but all of this present the same problem; when i try to connect to my vncserver,recive this mesage: unable connect to socket: No route to host (113) The OS version is Fedora Core 14 and tigervnc-server i try different solutions including:Allow TCP connection modifing files /etc/gdm/custom.conf and /usr/share/gdm/gdm.chemas Disable SELinux removing iptables Here follow the vncserver configuration:
[code].....
The ip address of the vncserver is correct because i can do ssh on it. Where or what can i do?
I have installed Xen on Debian. I am trying to create a virtual machine with "virtual machine manager" And it shows the following message: "Virtual machine manager Localhost (XEN) - not connected" And when i try to create a machine from command line i get the same error message:
root@debian:~# virt-install
ERROR unable to connect to 'localhost:8000': Connection refused
Traceback (most recent call last):
File "/usr/bin/virt-install", line 1033, in <module>
main()
[Code]...
After spending what seems like an eternity trying to learn how to host a couple of webpages on my laptop for no better reason than to practice creating them without paying for a server. .for the time being, I kept getting the usual errors (stuff I have seen lots of tutorials on) and this time kept getting
"The connection was refused when attempting to contact localhost"
Just by random chance I happened to open up Chromium for one of my attempts and low and behold, I get the much awaited
Quote:
It works! This is the default web page for this server.The web server software is running but no content has been added, yet. I can even login to phpMyAdmin from Chromium. So what's going on with Firefox? Doesn't work in Seamonkey either. Using 10.04
I have recently Installed Fedora 11. I have installed postgres like yum install postgresql but I wonder there is no user created for postgres when I tried su postgres system says, no identity for user postgres. even when I tried to connect postgres server using psql then it says
Code:
psql: could not connect to server: No such file or directory
Is the server running locally and accepting connections on Unix domain socket "/tmp/.s.PGSQL.5432"?
Trying to setup Samba for the first time and am unable to connect to the share from my Windows machine. It is a very basic setup, just trying to setup a single share to use a backup location for my windows files.
I've done the following:
1. Fresh install if fedora 15
2. installed samba
rpm -qa | grep samba
gives the following:
[Code].....
3. Used samba server configuration to setup the share and create the samba users
4. When I tried to connect from my windows machine I get the error that the server is not accessible, you might not have permission to use this network resource or I get the error "windows cannot access server, check spelling and try again.
Both computers can ping each other. I opened samba ports in the linux firewall and tried to connect again: same error Disabled firewall all together and have the same error. Here is the output from the testparm command
[Code].....
I set up a ftp server using VSFTPd. Remote connections are working fine. I can connect then create, rename and delete folders. I can upload files without any issue. BUT, each time i connect directly from the server (with the command "ftp localhost") i can't upload files either delete them. The only thing i can do is create folders. I'm getting error code "553: could not create file" when trying upload files. I triple checked the rights, everything is OK. I disabled SELinux (even if i don't like it). The weirdest thing is everything's working fine from remote host.
Below my vsftpd.conf:
listen=YES
tcp_wrappers=YES
anonymous_enable=NO
local_enable=YES
[code]....
I installed FC10, and configured everything to work with my static IP address [URL]. As far as email goes everything works except for the php script on my website. This script worked fine on my previous install, and it appears to actually submit the email as shown in the maillog:
Aug 12 14:21:02 myhome postfix/pickup[27581]: 37406BFDD9: uid=48 from=<apache>
Aug 12 14:21:02 myhome postfix/cleanup[27783]: 37406BFDD9: message-id=<20090812192102.37406BFDD9@www.myhome.com>
[code]....
I also created the following php script to test
<?
(mail ("test@myhome","Test message","this is a test"))
?>
And I was able to send successfully with this script with the only difference being it was sent by root rather than apache. This leads me to believe it's some sort of rights issue with the apache user. I wouldn't be surprised is SELinux was behind it all. I spent days and days after installing wordpress trying to get it to connect to mysql, and that turned out to be a SELinux issue.
I want to use bitlbee-irssi to IM using gtalk.. I have installed bitlbee and edited /etc/bitlbee/bitlbee.conf with
RunMode = ForkDaemon
User = bitlbee
DaemonInterface = 127.0.0.1
DaemonPort = 6667
Now when I try to connect to the localhost at port 6667 using irssi, i get the following error message saying it cannot connect to localhost port 6667
13:48 -!- Irssi: Looking up localhost
13:48 -!- Irssi: Connecting to localhost [127.0.0.1] port 6667
13:48 -!- Irssi: Connection to localhost established
13:48 -!- Error: bind: Permission denied
13:48 -!- Error: listen: Bad file descriptor
13:48 -!- Irssi: Connection lost to localhost
A similar looking error comes up when I try to telnet localhost at 6667. Also, I get a selinux warning saying SELinux is preventing /usr/sbin/bitlbee "name_bind" access .How do I check if bitlbee is listening to port 6667? Btw, I am using fedora 13, I have selinux running in enforcing mode and the firewall running. I have set the port 6667 in the other ports tab of "system-config-firewall" (I am hoping that this will open that port).
I have a strange problem with evolution in Fedora 14. I run my own mail servers (Postfix and Dovecot) on localhost. This all worked great in F13 but now evolution refuses to connect to the localhost imap server. If I connect from my laptop (also F14) i.e. not from the localhost all works fine and great with evolution. I deleted all the config and started again to no avail. I also created a new user and logged in with this user and I still get the same so looks not to be user config issue.
evolution --debug=evo.debug.txt returns nothing useful.
Dovecot is listening on localhost as I can telnet to the imap port. Also other imap clients like Thunderbird work fine.
I tried to install vsftpd on my server and while the installation went fine, I can't run
Code:
restart vsftpd
As I the get error
Code:
restart: Unable to connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory Though I'm able to restart the service with
sudo /etc/init.d/vsftpd restart with a warning telling me to use the service utility. Not only that, but despite the port being open it won't allow me to log in, it just hangs, and I have local users enabled (I've used the default .conf file). Does dbus not come installed in 10.04, and if I did install it would it make a difference for restarting the service? Are there further steps needed not available in the tutorial on the Ubuntu Server Guide for 10.04 to enabling local user authentication? -edit- Figured it out, dbus wasn't installed, vsftpd is working fine now.
how do i change the http://localhost/ to my owe name
View 1 Replies View RelatedI have an installation of Fedora 10 that has been running wonderfully for months, ever since I bombed my 9 installation trying to install Apache Tomcat (I really just wanted Apache, live and learn). I finally decided to brave the attempt to install Apache 2.2 again because I have a little more instruction to go by. Apparently not enough to deal with this snag though, at least not the way I want.
Install went fine, but I couldn't start the service. Following the error trail I found that it was binding IPv6 to port 80 and wouldn't allow any other ip or localhost to use it. I disabled IPv6, don't need it, I'll learn about it later.
I am trying to get my own email server set up, and so far its been going pretty smooth, The only thing that is not working right now is receiving emails. I can send email just fine, and when they are sent they are even sent from the proper addresses, but when I try to send an email to my domain, it does not go through.
I have the port forwards set up on my router to send all traffic on port 25 over to my mail server, I can telnet to the smtp server from the localhost just fine, but when I try to telnet from another computer on my network it gives me this message
Quote:
So I ran a netstat -an on my mail server to see what ip address smtp is listening on and I get this result
Quote:
Now most guides I find for this problem just say to un comment the line in the master.cf that says "smtp inet n - - - - smtpd", the problem is that line is already uncommented and I am still not able to telnet to port 25 from any machine on my network.
Here is my main.cf, tell me if there is anything that I can do.
Quote:
I'm running Fedora 12 on x86_64. I've installed squirrelmail, along with dovecot on my office server, and cannot access it through http://localhost/webmail. I have followed all the configuration steps I could find (including http://www.server-world.info/en/note...12&p=httpd&f=7).
I know that everything else is working (I can send and receive mail, access IMAP mailboxes, webserver is working), browsing to
http://localhost/webmail
just gives me
"Problem loading page"
in Firefox. Sometimes, however the message is "Unable to connect."
I will add that I already tried installing Squirrelmail on another (i686) machine and had exactly the same problem.
/var/log/httpd/error_log says:
File does not exist: /var/www/html/squirrelmail
This makes it seem like aliasing is not working somehow.
For backup and pre-functionality purposes, I need to simulate a VirtualHost in my Fedora (14) machine. I found some interesting links to carry out that process but with an IP fix.So, how can I simulate a VH through a localhost with a dynamic IP?
View 2 Replies View RelatedLast time I rebooted, sendmail & dovecot started from init and everything worked. I needed to reboot this weekend [new videocard] & yum had given me a new kernel etc.Now.2.6.34.7-56.fc13.i686 running Thunderbird - with 2 accounts chuck@otherserver.com and chuck@localhost.
The "otherserver" account works fine. Localhost won't pull in the mail.
/var/log/maillog says
dovecot: pop3-login: Login: user=<chuck>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured
dovecot: POP3(chuck): Disconnected: Logged out top=0/0, retr=0/0, del=0/0, size=0
[code]....
i have fedora 11 installed in my laptop and apache server by default. after starting httpd and mysqld services i was able to access localhost through browser.(e.g. [URL]). before installing phpMyAdmin everything goes right. after installing phpMyAdmin it created problem in localhost. now typing [URL] it opens joomla site but without images and without intending of content. when i type [URL] in browser it ask for user name and password. i already provide user name(root) and password(my_root_password) in /etc/phpMyAdmin/config.inc.php. but it doesnt open.
View 1 Replies View RelatedI did everything and restarted my machine, everything seems to be ok. But when i type in my IP on the browser which is 10.0.11.25 which would be the localhost machine, i get this below:
Code:
ERROR The requested URL could not be retrieved
While trying to retrieve the URL: [URL] The following error was encountered:
* Connection to 10.0.11.25 Failed
The system returned:
(113) No route to host
The remote host or network may be down. Please try the request again.
i have installed apache and php in my fedora 11 system and httpd works fine except that it doesnt have internet connection for example rapileech doesnt work it says "cannot connect via port 80" and if i put an rss feed collector in a website it doesnt work but everything else works fine , also when i put the same file in a shared web host it works fine
View 3 Replies View RelatedI can not use nfs from F10 client to F12 server. nfs mount on F10 to F12 times out anf nfs4 mount gives "mount.nfs4: mounting localhost:/home failed, reason given by server: No such file or directory" I have tried to close firewall and set selinux to permissive mode on both client and server with same result. Samba works fine. On server [root@flokipal ~]# mount -t nfs4 localhost:/home /media/tonlist mount.nfs4: mounting localhost:/home failed, reason given by server: No such file or directory
but
[root@flokipal ~]# mount -t nfs localhost:/home /media/tonlist
[root@flokipal ~]#
works
I have set up UEC on a single machine 64 bit blade. I have followed the steps as per the documentation.I am using Managed NOVlan mode. I have installed the Karmic kola image. When I try to run the instance, I get an error "no resources available. Try --addressing private". When I try addressing private, an ip address 172.19.1.2 is assigned and the instance was running.
a) When trying to ping the ip, error displayed that the host is unreachableb) I am also unable to connect to ubuntu@172.19.1.2 using ssh. Error message is displayed that " No route to host".I have searched the forums but couldnt find any solutionPS: I suppose everyone is very busy. I see very limited responses to posts. Sharing your experience and expertise will be helpful for all and will reiterate the meaning of ubuntu
I am running Ubuntu Server 10.04.01. When I try to start the MySQL service with
Code:
sudo start mysql
, I get this error:
Code:
start: Unable to connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
What could I do to fix it?
I have a new Ubuntu server (10.10), named Denholm, recently installed and updated. I came in this morning, attempted to add a package with apt-get, and got a "Connection refused" response. I have another server (also 10.10), named Moss, on the same network that can connect successfully.
Here's what I've found/tried so far:
This doesn't look like and apt problem anyway, but the sources.list files on Denholm and Moss are identical.
I can ping [URL] (and other sites) successfully from Denholm.
I have tried 'wget www.google.com'. From Moss the wget is successful, but from Denholm I get "Connection refused."
I have a web server on Moss and Denholm can successfully access it.
To the best of my knowledge, Denholm is not configured to use a proxy server (no http_proxy variable set).
I've set up a server running Ubuntu 10.10 (desktop) with apache. Problem is: When I try to configure multiple virtual hosts I can only access the first one. I'm sure that I'm missing something basic in my setup, but I cannot seem to figure out what.
What I want is simply two virtual hosts, one only available on the LAN where I can test my php files and one "live" available from the outside.
Heres what I've done:
Installed Apache2.2
Copy /etc/apache2/sites-available/default -> /etc/apache2/sites-available/dev
Modified "dev" config DocumentRoot and Document to point to /var/www/dev
Modified "dev" config VirtualHost to <VirtualHost *:1337> (port change right?)
Modified "default" config DocumentRoot and Document to point to /var/www/live
[Code].....
Live works fine, but dev cannot connect (as if there is no server there).
I am trying to setup a mumble server on Ubuntu Server 10.10. I have downloaded/installed all of the necessary files and configured my router to open up the necessary port (64738 ). However users outside of my network are unable to connect to the server (get Timeout error). Also to add, I am fairly new to using linux/ubuntu.I made a post on reddit where you will find more information regarding my problem: [URL]
View 5 Replies View RelatedI cannot log into 'localhost:631' to install my printer. I reinstalled cups files to no avail. Why do you think I cannot login?
View 3 Replies View RelatedGet the usual message of when theres network/connection problems:Unable to connect Firefox can't establish a connection to the server at localhost. I could access it a few hours ago, but now I cant Have not restarted the computer since, have not really done anything out of the ordinary either. Why is it doing that and how to solve it? I have never got this problem before.
View 2 Replies View RelatedI am running the HTTP server (Jetty) from Eclipse IDE, which listens on port 8888. I can connect to it in the browser with URL [URL] but not with http://192.168.1.100:8888/home, where 192.168.1.100 is my local IP. Not from this PC or any other PC in the LAN. Firewall is disabled. I can successfully ping to 192.168.1.100. I can share from this PC with SAMBA.
All configuration and logs look fine.