Fedora Servers :: Samba Works For About 2 Minutes Then Stops?
Feb 20, 2009
I can't seem to figure this out. I've got a DOS disc that loads up a network share (my Samba server running Fedora 10) - connects to the share, runs ghost.exe from there. Everything runs perfect for about 2 minutes, then my thoroughput drops to 0. Sometimes, after about 40 seconds, it'll resume imaging. Most of the time, after about 40 seconds, Ghost gives me an error stating 'not enough free space on the destination disc' - This is a raid 5 3TB array that I'm ghosting a 6.0Gb HDD to!
lanman auth = yes and client lanman auth = yes are already set up - I can connect fine, but it's almost like Samba hiccups and drops my connection!
View 6 Replies
ADVERTISEMENT
Nov 24, 2009
I'm running Fedora 12 on an Acer Aspire One with KDE. The built-in wireless works without a problem EVERYWHERE except at work. It's a shared wireless connection using WPA/WPA2 security.I can connect but it's "hit-and-miss" if I can do anything with it. Somedays it works well for a few minutes then has a period of inactivity - then slow - randomly receives...It worked flawlessly when the computer was running Windows7 no one else has connectivity issues but I'm the only one using Linux.
View 2 Replies
View Related
Jul 8, 2011
F15 current
avahi-daemon installed
nss-mdns installed
firewall totally disabled (for now while testing)
connected to network wirelessly
For perhaps 5 minutes I can either ssh into or from the F15 computer using:
ssh chris@macbook2.local
OR
ssh chris@f15.local
Works fine, no problems. And then in about five minutes it work resolve in either direction: ssh: Could not resolve hostname f15.local: nodename nor servname provided, or not known
I can still ssh in using an IP address. So I do:
[chris@f15 ~]$ service avahi-daemon status
avahi-daemon.service - Avahi mDNS/DNS-SD Stack
Loaded: loaded (/lib/systemd/system/avahi-daemon.service)
[code]....
*sigh* No that's not it. I just found no mDNS service in or out of the computer 3 minutes 26 seconds after restarting it, no additional items in messages.
View 3 Replies
View Related
Apr 1, 2011
When downloading a torrent after a few minutes my connection speed stops. Browser also. Same problem with Ktorrent and Deluge. The only way to solve the problem is to reconnect to my WLAN. I use a TP Link WR841N wireless router and a Toshiba satellite pro. The same setup is OK with windows and ubuntu 11.04 alpha3.
View 5 Replies
View Related
Jul 4, 2009
I have updated my laptop HP Pavilion dev7 to fedora 11. However, samba does not works properly. I can see share folders to mother machines, but not the shares in the laptop from other machines.The most annoying problem is that system-config-samba crashes. I run it as user, with sudo or su , but nothing.
View 8 Replies
View Related
Mar 18, 2010
I wish to prevent the samba messages (mainly nmbd and winbindd) from appearing in the system log (/var/log/messages). I want to allow samba logging to the standard samba logfiles, but prevent the syslog getting clogged up by samba. I added syslog = 0 to smb.conf and reloaded the config but the messages were still appearing. I also tried the following (and restarted the syslog via /sbin/service syslog restart) # Suppress messages from samba.
nmbd.* /dev/null
smbd.* /dev/null
winbindd.* /dev/null
For interests sake the messages I'm getting are below (I'm not concerned about the messages themselves, I can chase them up at my leisure via the samba logs) Mar 18 09:58:29 SERVER nmbd[3808]: query_name_response: Multiple (2) responses received for a query on subnet xx.yy.z.zz for name DOMAIN<1d>. Mar 18 09:58:29 SERVER nmbd[3808]: This response was from IP xx.yy.z.zz, reporting an IP address of xx.yy.z.zz.
View 1 Replies
View Related
Jun 17, 2009
I have install fedora11 live and the mouse work well when installing.When you reboot the mouse works ok until the welcome screen apears then the mouse stops working and I cannot continue with the postinstall. I have a 1TB usb externalHD that I am installing fedora11 and have partitioned it so that I have 500Gb free for fedora, system is doucore 2.4,4gb RAm, I tryed doing this with three differend mice and connectting the mouse to different usb ports
View 4 Replies
View Related
Jun 17, 2009
I was successfully using samba + fedora directory server in fedora 10 as a primary domain controller for my home network (achieved mostly by following barry905's instructions here: [url].
After upgrading to fedora 11, some of the pdc functionality no longer worked.
For example, when i ran 'pdbedit -Lv', i got:
Code:
I was able to fix this by adding to the [global] section in /etc/samba/smb.conf:
Code:
I also found that i could no longer join an xp computer to the domain. i discovered that for some reason, the samba administrator password had been cleared. after running:
Code:
That was fixed.
The last problem, which i have still not fixed, is that roaming profiles no longer work. when i try to do a domain login as user 'htpc' from an xp machine, i get the following message in xp:
Code:
Here's an excerpt of my /etc/samba/smb.conf:
Code:
View 14 Replies
View Related
May 3, 2010
I am running a website using a Fedora 9/ Apache 2 platform. I have added two new disks to the same server and installed Fedora 12 (I don't have both sets of disks in at the same time either the old ones with F9 or the new ones with F12). Having copied 'all' of the settings over to the new F12 installation it only serves pages on localhost not on the external IP as the F9 version does.
I have now installed F9 (got rid of F12) onto the new disks and copied the settings from the old installation onto the new disks and the server once again serves up pages. The only hardware changes are the disks being popped in and out between restarts as I swap between the old and new installations.
Hopefully there is some obvious (to someone) difference between F12 and F9 that would account for this.I have messed with settings for a while now and am almost at the point of paying for RHEL to see if that does the job.
View 4 Replies
View Related
Jul 8, 2011
I have two ubuntu 11.04 laptops that today stopped working with my home wifi, but my windows laptop works fine. These same ubuntu laptops connect fine to iPhone wifi hotspot.
View 9 Replies
View Related
Oct 22, 2010
I have created a Samba share, using the fantastic Webmin tool. I have a network media player which can connect to my router, and then access windows (samba) shares. Most of the time, it works fine - it's able to stream HDTV wirelessly across the network. However, every so often, it just stops working ... the media player sees :
Network, then
WORKGROUP, then
FILESERVER-1 (machine name), then
Media (share name), then
Video (subdir, then
TV_Shows (subdir), then
MyShow.AVI ... just hangs
if I use the Webmin tool, I see multiple samba connections all from the media player. Restarting samba seems to have no effect. The only way to fix it, is to reboot.
logfile I can check, or a setting I can tweak to fix this issue ?
When it get like this, trying to access the share from a windows machine, just gives me an error saying it can't find the machine. But when it's rebooted, it works fine.
I have mapped the "nobody" linux user to "guest" which is what the media player is defaulted to login with (it's primarily sold as a "Windows" media player), and using Webmin I have assigned the "nobody" user read-only rights to the samba share. It worked fine for 6 months, until I added this new drive.
View 2 Replies
View Related
Mar 15, 2011
I know what I need to do I just cant seem to achieve it and that is correctly setup a DNS server that works over the internet, I'm using BIND9 with webmin. I have Fedora 14 - Apache is install its all working locally, so this final step I just can't grasp to be honest.
View 14 Replies
View Related
Oct 27, 2010
the codeigniter didn't work in my Fedora,the welcome page,when your codeigniter works,it will shows,but it doesn't appear.the same step,it can work in Windows. What's the problem?
View 4 Replies
View Related
Jan 17, 2010
I have 2 web server in my office : http and https. You will find attached the httpd.conf and ssl.conf. I can acces the https server from home, but not the http one.
What I did :
configure the router to forward port 80 to my fedora 11 machine
open port 80 with system-config-network
created a virtualhost
The same exact steps have been done for port 443
I can access both server locally but only the https server remotelly.
Here are my iptables :
Code:
you can try to acces my servers using [url]
I made httpd to listen to port 8080, and done all the port forwarding/opening stuf, and it works. so is it a bug ?
Finally found my error seams like turning off UseCanonicalName to off did the trick
I really think it's a bug now. It was definitively working last week, I just added content to the main host of my website, and now i can't acces it from port 80. If someone think it's not a bug or find someting missing/wrong in my conf file.
View 2 Replies
View Related
Jul 3, 2010
As root, I use crontab to run mirrordir to backup directories. Everything gets copied over properly, but owner information isn't preserved and root is the owner of all the backed up files. I can deal with that, but crontab reports tons and tons of chown/chgrp errors for mirrordir every time I do back ups--which is every day--and the multiple emails to root of thousands of chown/chgrp errors is very annoying. The error is "Operation not permitted," but that doesn't make sense to me because the job runs as root (right?) and clearly the job is permitted to create the backup files, so why would it fail to chown and chgrp?
I've had the exact same setup on another server for years, and crontab has always run mirrordir without error. Any suggestions how to clear the errors on my new server?
View 14 Replies
View Related
Nov 25, 2009
Automatic upgrade ver 10 to 11 Have a large drive that is shared over Windows domain.This was renamed from /media/drive/ to /media/7534179143A7E34 All the users in Windows domain can not access the files or folders on the Fedora server - Samba setup. Why was the deive renamed and is this causing problems. I reshared the folders on the drive but still cannot access the drive. Where do I start to fault find please.
View 2 Replies
View Related
Apr 21, 2011
I'm having an issue with a Samba server running on an Ubuntu "server". Technically, it's not a server, it's just an old desktop with Ubuntu 10.04 running it..and I have a few server processes running (ProFTP, Samba, etc.)The Ubuntu server is where I store all of my important files that get backed up to a separate hard drive. I shared folders via Samba, and I use two computers to access the shares. I access the shares with an .sh file I created that uses the mount cifs command to mount to those shares.
It has been working flawlessly for a long long time, up until recently. For the past few days to a week, I will try to mount the shares with no result. In the terminal, the commands just freeze, as if the command is trying to execute, but having network issues.The only way I can get it to work is if I reboot the Ubuntu server, then it maps flawlessly. But a day later, it's back to hanging up when trying to mount.
View 4 Replies
View Related
Jan 5, 2009
I'm having some troubles with my samba shares on a fresh install of Fedora 10 x86_64 on my laptop. The laptop has only the KDE Desktop environment. I'm trying to share between this computer and my homebrew server via a wrt54g linksys router running DD-WRT firmware. The server is running Fedora 9 i386.
The shares on the server can be read by the laptop, and I have been consistently able to mount the server shares on the laptop using mount.cifs, but only when the firewall on the server is down. Shares are only visible between the machines when the firewall is down on the machine containing the share. I set up the shares using the system-config-samba tool, and the firewalls are both set to allow samba server and samba client. I can typically see the laptop from the server, but not the shares, and only when the laptop firewall is disabled. I can access the Laptop shares from the laptop. When trying to mount the laptop shares on the server, a warning message stating that the mount failed appears. Shares show up as correct in both the system-config-samba tool, and the KDE sharing tools. The share shows a "shared" icon in the dolphin browser.
From all that I know, the shares should work perfectly. I've searched the web, perused the man pages and how-to's, and combed through the forums, and everything I've found tells me that the shares should be working. Since they are not working, it leads me to believe that I must have made a mistake someone and not noticed it.
View 8 Replies
View Related
Mar 8, 2009
I've read through these pages [URL] but can't seem to get Samba server working. I am using Gnome and I go to System - Administration - Services
In there I can see smb and nmb. Both are enabled, but both have a status of unknown. I can't seem to start or stop either of them. I can just enable or disable them. I've tried using the gui, as well as command line.
I'd really like to get this going as I'd like to copy files from my XP Pro box to my Linux box (F9). I have WinSCP, but am having permission issues and I can only copy to a folder on my desktop on the Linux box (I'd like to get this fixed too, but that's a different thread at a later time)
View 10 Replies
View Related
Apr 8, 2009
I've been running a F10 based Samba Server a few months without trouble. Now, after an update, samba is not working any more. When I try to start it manually, it reports the following error:
[root@hawkeye ~]# /etc/rc.d/init.d/smb start
Starting SMB services: /bin/bash: line 1: 3403 Aborted (core dumped) smbd -D [FAILED]
[root@hawkeye ~]#
I've re/installed all samba packages and configure the smb server again from scratch but the problem was not solved. My samba packages are:
[root@hawkeye samba]# rpm -q --all | grep samba
samba-winbind-3.2.8-0.27.fc10.i386
samba-client-3.2.8-0.27.fc10.i386
samba-3.2.8-0.27.fc10.i386
[Code]....
View 8 Replies
View Related
Nov 7, 2009
I have it set right now to be open so that there's no need to type in username and password information. It works great. I can type \*IP Address* on my WinXP laptop while on the network, and it brings me to the Public folder that I'm trying to share. But, when I click on the folder to open it up, it just sits there and eventually will give a userid/password prompt or will give me an access denied error.
Here is my smb.conf:
#SMB.CONF
[global]
[code]....
View 2 Replies
View Related
Dec 3, 2009
When i try to create a new samba user the computer locks up and i get this message. can someone help me out. TB08997608 connection.py:630:call_blockingBusException: org.freedesktop.DBus.Error.Spawn.ChildExited: Launch helper exited with unknown return code 1
[Code]...
View 4 Replies
View Related
Feb 9, 2010
So I've set up a Samba server through the gui. When I've labeled my shares as accessible to everyone, I can get to it no problem. However, when I tie it down to a specific samba user, I can't.
By all indications, it appears that it isn't saving the password because every time I go to edit users, it has the exact same string in the password field.
View 1 Replies
View Related
Apr 24, 2010
When I try to add a user to samba (using the GNOME UI) in F12, after enter all the information and click OK.it will just hang for about 20 seconds, and then do nothing. Window is still there, I click OK again and same thing.heres the steps i followed:
1) click preferences, Samba Users...
2) click add user
3) select user "joe" (example) from drop down of users
4) enter "joe" windows user name
5) enter password for joe (same as user password)
6) click OK
7) hangs 20 seconds then nothing.window is still there.click OK again same thing no user added
View 1 Replies
View Related
May 17, 2010
I've done this before, maybe ten times. This time is different. I don't know why, but Samba will not allow any clients to connect.
I've done:
- installed samba
- setup the samba shares
- have a samba user/passwd
- authentication = users
- punched in the samba stuff for firewall
- workgroup is set right
What the heck? I cannot get any client to connect. Not even the server machine can connect to itself through a client. What am I missing here???
Just for the record, I'm trying to connect to \SERVER:
Code:
Code:
I removed a whole lot of comment lines in the config file.
View 7 Replies
View Related
Jan 26, 2011
I wan't whatever file/folder that ends up in the public folder to automaticly be open to whosoever access that folder. Right know I have to "chmod -R 777 file/folder.* "
View 4 Replies
View Related
Jul 6, 2011
I tried to browse my home dir but I can not. I chown also with loek:loek /home Here is my sambaconfig:
[global]
workgroup = MYNETWORK
netbios name = LINUX
security = SHARE
log file = /var/log/samba/log.%m
[Code]....
View 3 Replies
View Related
Jul 25, 2011
I just have installed Fedora 15 to use it for multimedia server. I have installed also samba. Now I'm trying to access it from another PC (Windows 7) and I have no write access.
Code:
[root@echo mnt]# ls -l
total 12
drwxr-xr-x. 2 root root 4096 Jan 1 2006 boot
[Code]....
i just read whole internet (i have spend over 6h for reading and testing a lot of options and nothing...)
View 9 Replies
View Related
Jul 26, 2011
I have been trying to set up a small file server on Fedora 15 using Samba. When I try to connect from WindowsXP it says the network is not accessible. I have tried to make multiple changes to the settings but to no avail.
View 1 Replies
View Related
Jun 22, 2009
I upgraded from Fedora 10 to Fedora 11, and it seems that when I saved my main.cf file, something changed in the versions and it no longer works. I've tried going through the file and tweaking it, but it's not working. Here is the postconf
[Code]...
View 7 Replies
View Related
