I have updated my laptop HP Pavilion dev7 to fedora 11. However, samba does not works properly. I can see share folders to mother machines, but not the shares in the laptop from other machines.The most annoying problem is that system-config-samba crashes. I run it as user, with sudo or su , but nothing.
View 8 RepliesI'm having some trouble getting samba to work properly. I'm following this tutorial [URL] when I run
Code: sudo smbclient -L localhost I receive the following: Code: Enter root's password: Anonymous login successful Domain=[SAMBA] OS=[Unix] Server=[Samba 3.4.7]
tree connect failed: NT_STATUS_END_OF_FILE I'm lost!
I can't seem to figure this out. I've got a DOS disc that loads up a network share (my Samba server running Fedora 10) - connects to the share, runs ghost.exe from there. Everything runs perfect for about 2 minutes, then my thoroughput drops to 0. Sometimes, after about 40 seconds, it'll resume imaging. Most of the time, after about 40 seconds, Ghost gives me an error stating 'not enough free space on the destination disc' - This is a raid 5 3TB array that I'm ghosting a 6.0Gb HDD to!
lanman auth = yes and client lanman auth = yes are already set up - I can connect fine, but it's almost like Samba hiccups and drops my connection!
I was successfully using samba + fedora directory server in fedora 10 as a primary domain controller for my home network (achieved mostly by following barry905's instructions here: [url].
After upgrading to fedora 11, some of the pdc functionality no longer worked.
For example, when i ran 'pdbedit -Lv', i got:
Code:
I was able to fix this by adding to the [global] section in /etc/samba/smb.conf:
Code:
I also found that i could no longer join an xp computer to the domain. i discovered that for some reason, the samba administrator password had been cleared. after running:
Code:
That was fixed.
The last problem, which i have still not fixed, is that roaming profiles no longer work. when i try to do a domain login as user 'htpc' from an xp machine, i get the following message in xp:
Code:
Here's an excerpt of my /etc/samba/smb.conf:
Code:
if I use the final flag, postfix loggs to /var/log/messages, not to /var/log/maillog.What I am doing wrong?regards ralfHere my config:
options {
sync (0);
time_reopen (10);
[code]....
i got everything working on my laptop, i just can't set up my network sharing..
I have a desktop pc running Windows 7, and this laptop running openSuse 11.1!
I use Gnome by the way... When i get to Network in Nautilus, i double click on Windows Network -> Workgroup -> Windows7PC, but at that point i don't see any folders or anything..
This is my smb.conf file:
Code:
# smb.conf is the main Samba configuration file. You find a full commented
# version at /usr/share/doc/packages/samba/examples/smb.conf.SUSE if the
# samba-doc package is installed.
# Date: 2008-12-03
[Code].....
In firewall i added Samba in broadcast, followed some tutorial on the net..
I just installed ubutnu 9.10 and just installed samba. I edited the config files to workgroup to dhome which is the work group all my windows comptuer uses to share files. I want to share files and also be able to access files off my windows computers. I got onne windows 2000 that has a username needed to be typed in to access it. the rest is accessable. In the config file. I uncommented the security= user thing. I now tried to access the network but still fails.
Here is what I can see. when I go to places and click network I see windows network and click it it will say dhome and Workgroup. when I click on the dhome folder it takes a while and then gives me the error saying sorry didnt' get a list from the server. what do I need to do to access the network?
I'm having great trouble networking my computers
[Code]...
2 are ubuntu, 2 are XP. ubuntu machine 1 has printers. I managed to print a document from ubuntu machine 2 to ubuntu machine 1 via the network; however ubuntu machine 1's shared docs dont show up on any of the PCs. I am unable to see ubuntu machine 1 on any of the windows pcs, cant find the printers or any sign of the PC actually being there, but pinging the PC is no problem. Basically network printing from ubuntu 2 to ubuntu 1 works fine; but ubuntu 2 cant see ubuntu 1s shareddocs and vice versa. The windows PCs don't seem to even know that the ubuntu PCs exist. no printing or sharing
I've spent days trying to setup access properly from a public address to a monitoring server that works fine locally. Everything works from public access until I try to link to a CVS repository. The rancid CVS repository is set up as a separate server (virtualhost). It appears the referring link causes a DNS error (105: Server Not Found) when the CVS repository server is accessed from the public address. Things work fine when accessing via localhost.
Localhost link:
[URL]
Public link: (this results in 105 error caused by redirection (bold portion of link))
[URL]
Code:
Virtualhost config:
LoadModule jk_module /usr/lib/apache2/modules/mod_jk.so
JkWorkersFile /etc/apache2/workers.properties
JkLogFile /var/log/apache2/mod_jk.log
[code]....
I am using Fedora 12. I have the following problem, when i working with system-config-samba dialog:I add the new user on the server:as following:
Unix username: vova
Windows username:test
As described in Customisation Guide for Red Hat 9: "If the user has a different username on a Windows machine and will be logging into the Samba serverfrom the Windows machine, specify that Windows username in the Windows Username field."So i logged from the Windows machine not under test(Windows username) but under vova.And i logged in without the problem. However it seems that samba should check windows username=test (as have written in samba-config) and ask an password for different users. And additionally, if samba check the currect user in Windows itself and verify it with Unix user, what for we need write the Windows username in samba config? I don't understand
How can I set up multipath to two devices properly? I'm sure that I need to do something more then just: /etc/init.d/multipathd start
View 1 Replies View RelatedI'm new to Ubuntu and I'm pretty sure I'm just missing something simple. I want to use Samba to share my raid array to all of my machines, so I have...Installed Ubuntu and created a single user: mattMounted my ext4 raid set with fstab:
Code:
UUID=78d85398-d179-4640-bb1b-f770ba90abb1 /media/Data ext4 defaults 0 0
Installed Samba (real Samba, I haven't touched the Nautilus-Share right-click thing):
[code]...
I have a problem with Samba. I've already configured my SMB.conf file, but I can't connect to my Windows shares by their host name. for example: if I try to connect to GDEA73-PC-1 share = netshare, server connection fails. if I try to connect to 192.168.1.171 then share = netshare, it works. How do I fix this? When I run findsmb, I am on the GDEA73 NETWORK workgroup as I configured, but my local PC is the only one on it...
View 2 Replies View RelatedWe just set up a vpn & samba server and are running into this problem.
we can log into the vpn and can ssh, http, ftp in the various servers on the internal network. however when trying to view Samba/Windows shares over any windows machine, they fail to connect. BUT we can vpn in on any android device and using a samba app view the Samba & Windows shares on any server we try.
If im logged in the network internally, there does not seem to be a problem. Only if we VPN in from the outside.
a customer is running an old DOS application to run their business using windows 98/XP workstations that run the DOS app. I configured a Redhat 7.1 samba server (with fault tolerant backup server) for them back in the early 2000s & its version of Samba 2.2, I eventually made it work with all of their systems for printing & secure file sharing ("secure" for them anyway). Fast forward to 2011 & they would like to replace the aging Redhat servers with Ubuntu 10.10. So I set that up & got the following components working with the default install + patches of Ubuntu (using apt-get install samba): Windows XP: 1.) Password protected share access. 2.) Can browse Samba from Network Neighborhood.
3.) Print from XP Windows to HP network printer through Samba. 4.) Print from XP DOS terminal to HP network printer through Samba. XP is pretty much ready to go. Now, Windows 98: 1.) Password protected share access. 2.) Can browse Samba from Network Neighborhood. (this was tough!). 3.) Print from XP Windows to HP network printer through Samba. Note: CANNOT Print from Windows 98 DOS terminal to HP network printer through Samba! When I setup the LPT1 from net use on DOS to point to the Samba share, I then test by running DOS Edit, typing test, & then File->Print. It states that it can't print to LPT1 and asks to Retry, Cancel or Exit. No errors are given on the Samba side & Windows 98 doesn't seem to have an Event Viewer to tell me what's wrong. The whole thing works with Redhat 7.1 Samba though. Good old Samba 2.2. SIGH. So what I did was use my VMware Workstation & built an Ubuntu 10.10 workstation with Samba, built an XP workstation & Windows 98 vm image. I didn't have network printing, so I setup CUPS-PDF to print to PDF files in Samba. As with the "production" installs of their business, I got everything working just fine except DOS LPT1 on Windows 98. So I can get the same error in a test environment basically & it's still puzzling....
I have tried loading 11.4 from the DVD from Linux Magazine. Everything goes swimmingly until I get to using it when the screen shows black rectangles, is "twitchy" and nothing works properly. I currently run 11.3 which works fine.
View 3 Replies View RelatedI have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.
View 4 Replies View RelatedI wish to prevent the samba messages (mainly nmbd and winbindd) from appearing in the system log (/var/log/messages). I want to allow samba logging to the standard samba logfiles, but prevent the syslog getting clogged up by samba. I added syslog = 0 to smb.conf and reloaded the config but the messages were still appearing. I also tried the following (and restarted the syslog via /sbin/service syslog restart) # Suppress messages from samba.
nmbd.* /dev/null
smbd.* /dev/null
winbindd.* /dev/null
For interests sake the messages I'm getting are below (I'm not concerned about the messages themselves, I can chase them up at my leisure via the samba logs) Mar 18 09:58:29 SERVER nmbd[3808]: query_name_response: Multiple (2) responses received for a query on subnet xx.yy.z.zz for name DOMAIN<1d>. Mar 18 09:58:29 SERVER nmbd[3808]: This response was from IP xx.yy.z.zz, reporting an IP address of xx.yy.z.zz.
I want to use samba for file sharing like on a Windows home network. Actually they are all Linux machines but nfs is too complicated. On my host machine I installed samba and system-config-samba. I created a new share for /home, check marked writable and visible and put access to everybody. For preferences-->server settings--> security the "authentication mode" is set to user, encrypt passwords is no, and guest account is no guest account. Under preferences-->samba users I added myself as a user with the same windows user name as my Linux user name and the same password.
My client is a virtualbox fedora (used for testing purposes but actual clients will be real computers on my home network). I entered the address smb://192.168.1.184. When asked for the user name and password I put my regular user name and password since that was what I set in samba users. However, the password dialog keeps coming up and won't let met into my own computer. If I quit it says something like access is denied. How can I get my home network back? I liked this feature when my home computers ran XP but I switched them to Fedora 12.
Does anyone knows good commercial or non-commercial antivirus software that runs on ubuntu 10.04 and that works with the samba v-scan module? I was thinking about Avast, but I'm not sure it works with samba v-scan. Also I'm not sure it is possible to install the avast server edition for linux on ubuntu 10.04.
View 6 Replies View RelatedI am trying to make my fedora 15 my gateway instead of my old D-Link, but I can't seem to get it working.
View 5 Replies View Relatedusing ubuntu and the corporate edition of open dns? >Im curious to find out how the anti malware filtering works in open dns works.
View 4 Replies View RelatedI just want to be able to copy the files from a cd that is only compatible with windows to and new cd that is compatible with ubuntu
View 9 Replies View RelatedI've got a problem in doing sudo working for mounting things (e.g. usb pen or optic discs). Details:The OS: Slackware 13.0The response to sudo -l command:
Code:
User user1 may run the following commands on this host:
root) /sbin/shutdown -h now, /sbin/shutdown -r now
[code]...
I've installed several programs. Some installed and worked, some did not. I installed Konversation and Audacity. Both work fine. When I installed bitpim via RPM downloaded from bitpim.org it installed fine. It is not in the applications area. I type Alt+F2 and i start to type in bitpim (it types the rest) and press enter. nothing happens.
i installed PythonCard through the terminal using yum install PythonCard. It installed fine and it is not in applications and is nowhere to be found. However when I type yum install PythonCard again in the terminal it says it is up to date. So I removed it and reinstalled. Same problem.
When I delete things from my home directory, or from my desktop,my trash can on the desktop stays empty, and the Empty Trash in the right-click menu stays disabled.The files disappear from view, but the disk space remains labeled as used.The only way I can empty my trash is through the trash on the panel. Weird
View 1 Replies View RelatedI was just trying to install some packages at the gpk-application 2.27.2, but they are not compatible. For some reason I can't install anyting. I have Fedora Leonidas. In another forum they told me that my package installer is not the proper for this version
View 1 Replies View RelatedI'm new to Linux. I have recently made my first Linux install using Fedora 11 and Alfresco with a view to running a PoC ECM server. After some initial teething troubles and a seemingly exponential learning curve, Fedora and ALfresco are now installed and running bar a couple of things. Alfresco relies on swftools to automatically transform file types and swftools does not come installed either with Fedora, as an available package to download within the Add/Remove software program or with Alfresco.
I have installed the dependencies of swftools (zlib-devel, libjpeg-devel, giflib-devel, freetype-devel, gcc, gcc-c++ and make) but for some reason neither swftools-0.8.1 nor swftools-0.9.0 will compile properly. I even installed lame in case but still problems. This is what I do to install:
tar -zvxf swftools-0.9.0.tar.gz *stuff happens*
cd swftools-0.9.0
./configure --disable-lame (lame disabled as advised by Alfresco Wiki) *stuff happens*
make *stuff happens with errors*
The errors include :
warning: initialization from incompatible pointer type
invalid conversion from 'const char*' to 'char*'
Error 2 etc...
I only use it to run a program off of CD, not an installed application. This same program ran fine with wine under Fedora 10 & 11, but not on Fedora 12. I installed wine with:
Code: yum install wine as root. When I try to execute the program, it shows the little bouncing wine icon and all, but then wine disappears. Also, when I looked at the wine configuration, the configuration program crashed/hung. I had to kill it via the System Monitor. I'm on a KDE desktop with hardware acceleration, and Fedora 12 x86_64.
F12 + Samba4, services smb and nmb set to run at levels 2345 - after reboot, I need to manually doservice nmb restartin order for all machines on the network to "see" the shared folders. It appears that service nmb does NOT start properly, as when above command is entered it shows "FAIL" as message for stopping the service.
View 1 Replies View Related