I have been trying to set up a small file server on Fedora 15 using Samba. When I try to connect from WindowsXP it says the network is not accessible. I have tried to make multiple changes to the settings but to no avail.
View 1 RepliesI'm having some troubles with my samba shares on a fresh install of Fedora 10 x86_64 on my laptop. The laptop has only the KDE Desktop environment. I'm trying to share between this computer and my homebrew server via a wrt54g linksys router running DD-WRT firmware. The server is running Fedora 9 i386.
The shares on the server can be read by the laptop, and I have been consistently able to mount the server shares on the laptop using mount.cifs, but only when the firewall on the server is down. Shares are only visible between the machines when the firewall is down on the machine containing the share. I set up the shares using the system-config-samba tool, and the firewalls are both set to allow samba server and samba client. I can typically see the laptop from the server, but not the shares, and only when the laptop firewall is disabled. I can access the Laptop shares from the laptop. When trying to mount the laptop shares on the server, a warning message stating that the mount failed appears. Shares show up as correct in both the system-config-samba tool, and the KDE sharing tools. The share shows a "shared" icon in the dolphin browser.
From all that I know, the shares should work perfectly. I've searched the web, perused the man pages and how-to's, and combed through the forums, and everything I've found tells me that the shares should be working. Since they are not working, it leads me to believe that I must have made a mistake someone and not noticed it.
have a server here running opensuse 11.3 that I need to access via network using samba.
Samba is working so far and I can ping the serve and browse the shares from windows (WinXP) computers; but only via the IP.Now I've read up on samba on this forum and other sources, like the official samba documentation and compared my smb.conf with an older one on another server which works (and even copied this one over to the new one) - to no avail.I seem to be missing something and I just can't find it.Since the problem is probably not in the smb.conf (previously working one doesn't work on new server) - where else could I have screwed up?
I am running Ubuntu 10.10 and have 5 shares that I have setup for Samba (assume names of share1, ..., share5). I find that shares(2,3,4) are accessible from my MS Windows system, but the share1 and share5 are listed but Windows gives an error accessing them that I may not have permissions.I have reviewed the sharesve the same owner, group, and permissions.Is this a known Samba bug or configuration issue? I have gone through the smb.conf file multiple times as well as examining the directories and do not see what the issue might be.
View 9 Replies View RelatedI have recently done a fresh install of Ubuntu 11.04 Server (64-bit). I selected Samba during installation, but a subsequent
Code:
# apt-get install
installed some additional packages. I have been using my actual smb.conf file as well as
[code]...
Linux and have a western digital server (my book world edition) I can access it with Ubuntu 11.04, just by downloading Samba and then by clicking on network and the server shows up, but with Fedora 15, after I have installed Samba, I click on network and all that shows up is my router?
View 1 Replies View RelatedI have a problem with the samba server on my ubuntu 10.10 computer. I want to add a samba share which shall be accessed from windows 7. I installed samba and tried to connect to the computer but the connection gets rejected "Bad username and/or password" says Windows but the samba log says:
[Code]...
I'm trying to setup a Samba network share with a Fedora Directory Server backend. This will be used primarily for Windows users to authenticate before accessing the share. I am using Fedora Core 10 and have all of the latest updates installed. When I try to connect from a Windows machine, I am prompted for a username and password. I enter the username and password of the account I created in Fedora Directory Server in OU=People. The credentials are rejected. At the same time in the log file I see this:
[2009/02/24 16:50:16, 3] auth/auth_sam.c:check_sam_security(282)
check_sam_security: Couldn't find user 'Administrator' in passdb.
[2009/02/24 16:50:16, 2] auth/auth.c:check_ntlm_password(318)
check_ntlm_password: Authentication for user [Administrator] -> [Administrator] FAILED with error NT_STATUS_NO_SUCH_USER
Administrator is the user I created in Fedora Directory Server. If I perform an ldapsearch it will find the user as uid: Administrator so I know it is able to be looked up in FDS. But I'm guessing that's not the problem.
[Code]...
I am working on fedora 10 and configured dns on my college lan which already has it's dns at 192.168.5.20 .So i configured my private dns server at 192.168.101.91 which is my ip too.And the domain name is the host name of my system for example server.onkie.com.MY dns port 53 is shown when i do nmap localhost but but doesnt show when i do nmap 192.168.101.91 .Also when tested my server on other computers on my lan with there primary dns as 192.168.5.20 and secondary as 192.168.101.91 they cant access my site at my system with the name [URL].. . nmap localhost
Starting Nmap 5.00 ( http://nmap.org ) at 2009-09-22 21:24 IST
Interesting ports on onkar (127.0.0.1):
Not shown: 993 closed ports
PORT STATE SERVICE
22/tcp open ssh
53/tcp open domain ----the dns is running
[Code]...
I already disabled my selinux and iptables ..but then also it's not accessible in Lan .
I'd like to share files between two Fedora 14 systems, but I'm having difficulty with making a share accessible via NFS.
Here's what I've tried so far:
Tried following mount commands:
Password:
Unable to find suitable address.
Used both the user and root password with this second mount command.
Currently I am trying to get some fedora shares to simply connect to each other to access a read-only shared folder on a host machine (no security/encryption even required for these files!). I've tried to get a smb network share going but that didn't work (can't connect with nautilus), I've tried a quick fix with daap and rhythmbox so that they can at least access the music, but rhythmbox fails very miserably trying to connect/create that (and mt-daapd didn't help much) - Basically I get errors saying the host is unreachable.
I haven't even set up a firewall yet for this network and already I'm running into these fundamental problems. Currently I'm using Fedora 15. On a whim I tried the "public" folder and had sharing of the public folder over the network enabled - yep, didn't work (and I certainly didn't expect it to). I would be trying some more advanced CLI stuff, setting up an ssh server or something, but the computer-challenged people who have to access these files just want to be able to click something and have it work.For the operational requirements of this setup, a file synchronisation system would work (although highly inefficient since it would mean gigabytes sent over the network).
I wish to prevent the samba messages (mainly nmbd and winbindd) from appearing in the system log (/var/log/messages). I want to allow samba logging to the standard samba logfiles, but prevent the syslog getting clogged up by samba. I added syslog = 0 to smb.conf and reloaded the config but the messages were still appearing. I also tried the following (and restarted the syslog via /sbin/service syslog restart) # Suppress messages from samba.
nmbd.* /dev/null
smbd.* /dev/null
winbindd.* /dev/null
For interests sake the messages I'm getting are below (I'm not concerned about the messages themselves, I can chase them up at my leisure via the samba logs) Mar 18 09:58:29 SERVER nmbd[3808]: query_name_response: Multiple (2) responses received for a query on subnet xx.yy.z.zz for name DOMAIN<1d>. Mar 18 09:58:29 SERVER nmbd[3808]: This response was from IP xx.yy.z.zz, reporting an IP address of xx.yy.z.zz.
I'm running Ubuntu 10.04 and Samba 4.The folder I've shared is on NTFS partition and though is visible from other Windows 7 system on LAN, can't be browsed. Even from my own computer if go to network places the folder is there but when I double click on it I get
View 9 Replies View Relatedusing OEL 5.4, which uses Gnome 2.16 interface I can see my share from Windows, but whatever I do, I get messages that my share is not accessible. The whole user thing is quite complex, dont understand what user I should use on Windows, what password, what user should have what rights on linux.
I'll post smb.conf tomorrow ... The problem is that Windows lacks any decent error message, stating what kind of error message. Is there no Samba client for Windows?
I have setup Samba shares on my Ubuntu 10.10 and assigned different different username and password combination for each share.
The sharing works perfectly fine on all the Windows machines but it does not work on OSX. When I try to connect using OSX, it ends up showing waiting icon (screenshot attached) after entering username and password. (It asks for the login details after selecting the share from the list)
Following is my smb file content:
Code:
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
[Code].....
I have a samba server set up on my computer, and I can only access the shares over the network by loging in as my main user. This works for all shares, on any drive. When I log in using my fileshare guest account, I get the list of shares, but after selecting one to connect to, it gives an error that the server isn't available. Any share off the boot drive won't work. I don't know if it has to do with permissions, or it's a config problem.
View 5 Replies View RelatedI want to use samba for file sharing like on a Windows home network. Actually they are all Linux machines but nfs is too complicated. On my host machine I installed samba and system-config-samba. I created a new share for /home, check marked writable and visible and put access to everybody. For preferences-->server settings--> security the "authentication mode" is set to user, encrypt passwords is no, and guest account is no guest account. Under preferences-->samba users I added myself as a user with the same windows user name as my Linux user name and the same password.
My client is a virtualbox fedora (used for testing purposes but actual clients will be real computers on my home network). I entered the address smb://192.168.1.184. When asked for the user name and password I put my regular user name and password since that was what I set in samba users. However, the password dialog keeps coming up and won't let met into my own computer. If I quit it says something like access is denied. How can I get my home network back? I liked this feature when my home computers ran XP but I switched them to Fedora 12.
I used Samba to share some files. But when I try to share /home/username/download, it is not accessible by WindowsXP. But when I modified the dir to /opt/*. It is OK.
View 2 Replies View RelatedI'm running slack64-current.I setup samba to share a printer on my home network. I can print to the printer locally.The printer is visible on the network. However when I try to print anything on the printer via samba (or cups for that matter) from either the local machine or the remote machine, everything acts as if the job went through, but nothing happens. I'm sure I've seen this before on another slack machine that is currently unavailable, but I can't remember what the answer was, and I'm trying to be more precise with this setup so that I actually learn something.
smb.conf
PHP Code:
#======================= Global Settings=====================================
[code]....
I have Linux installed on one machine with samba running and a second machine running XP. They are going through my router and I am using the same username/passwords for both machines and I have even gone to the point of allowing access to everyone for the share I created and the worgroup in samba is MSHOME just like my XP machine. When I view (or search) my workgroup computers my Linux machine shows up and so do the shares I created but when I try to open them I just get a message that permission is denied and I may not have permission to use this resource. I even tried setting access to the shared folder to 777 but still I can't open this share. Has anyone got any idea of why this is?
View 3 Replies View RelatedWe have an existing Windows 2000 network that I am trying to add an Ubuntu 8.04 server to. I have put links into the windows domain DFS to the linux machine's samba shares.
The shares work fine for local users that are physically on the same network (192.168.0.X). Remote users from other offices or dialing in with a vpn client can not access the these particular folders off the DFS. However, they can map them directly from the ubuntu server.
I have Samba 3.5.3-61 running on a Fedora Core 13 system. I created a share that is browseable to all systems, and I made sure to create a user account via the smbpasswd utility. When I try to connect to the server from a Windows XP system, I am able to enter the appropriate sharename as well as the username and password.
View 3 Replies View RelatedI did set samba server up. I just modified only one configuration from default /etc/samba/smb.conf file.
Just workgroup = MSHOME to workgroup = WORKGROUP.
And browseable = yes.
Beacuse my xp workgroup is WORKGROUP. So I changed as same workgroup name
both unbuntu and XP.
But I couldn't find samba pc on network places at XP. I have started smbd and nmbd already. There is a ridiculous something. I can access samba at XP only typing \samba IP address. But why I can't see at network places. I am using ubuntu 10.04 TL.
I cannot browse the samba printers from windows xp professional clients.
I get the following message when trying to access the workgroup:
Code: Example is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
The list of servers for this workgroup is not currently available
Another strange thing is that if I set the workgroup to EXAMPLE in smb.conf, the workgroup shows up as Example on my windows clients.
My network comprises three PC's .... Windows XP, Windows 98SE and Ubuntu 9.04 running SAMBA. All PC's are configured WORKGROUP=WORKGROUP. The network connection To/From XP/UBUNTU via SAMBA Shares works perfectly OK. However, despite scouring all forum information regarding changes to Win98 ENCRYPTION, (Registry change re: DWORD "EnablePlainTextPasswords"), the Win98 PC refuses to connect to UBUNTU. The UBUNTU PC can conect to all the Win98 shared folders OK. I have disabled my Linux Firewall (Firestarter), I have run SMBCLIENT to check the user password for Win98 and it is validated OK. The Win98 error message is ....
"\Inspiron 510m is not accessible. The computer or sharename could not be found. Make Sure you typed it correctly and try again."
My samba.conf file is as follows ..... Any help or assistance PLEASE !
#======================= Global Settings =======================
[global]
## Browsing/Identification ###
# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = workgroup
# server string is the equivalent of the NT Description field
code....
I have a problem with apache server. The thing is - I can connect to my server on localhost, but when I try to connect from local network, it doesn't reply.
I can ping my web server from lan. I can ssh my web server from lan.
I haven't modified iptables since install except these commands>
Code:
iptables -A INPUT -p tcp -s 0/0 --sport 1024:65535 -d $MY_SERVER_IP --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT
iptables -A OUTPUT -p tcp -s $MY_SERVER_IP --sport 80 -d 0/0 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT
[Code].....
I set up a mail server today. Everything works except I can't access the damn squirrelmail web interface from the internet.
I followed this guide here: [URL]
I can access http://192.168.0.50/squirrelmail just fine from a computer on my local network.
*BUT*
When I access http://mywanip/squirrelmail, i get a connection timeout.
When I access http://mywanip, I get the standard Apache "IT WORKS!" Page. (Rules out port forwarding)
According to the guide, that should allow me to access squirrelmail from the internet on my server. Its as if Squirrelmail is only available on my local interface and not on my wan interface? How do I check?
I've setup openVPN using bridging following these guides
[URL]
I'm running Ubuntu Server 10.10 My clients can connect and get their own IP within my ip range (192.168.1.x) They can ping each other and I've tested I can use the connection a lan game and a windows RDP connection. The problem is I cannot access any of the actual local network devices except the vpnServer. Is their something else that needs to be done to allow full network access?
I have a website on a standalone Ubuntu server (using virtual host). I can access the site from 3 different Macs using Safari, Firefox and Chrome. I can access the site from my Mac using virtual Windows XP Pro in VirtualBox. But I cannot access the site from any Windows machine on the LAN, and it's frustrating I cannot get to it with name resolution nor with IP address.Here are some of my related configs:
In sites-available (also in sites-enabled)
mywebsite.conf
<VirtualHost *:80>
DocumentRoot /var/www/mywebsite
ServerName mywebsite
ServerAlias *mywebsite
Directory /var/www/mywebsite
</VirtualHost>
[Code]...
Does anyone know why I can get my site on Macs, but not Windows?
I have a share accessible from XP. However if I go for lunch and come back when I click on the share in Explorer it says its not accessible. When I click on it again it works. Its like the network card in the Suse server is going to sleep but I cant see any settings for it. I know where they are in XP and wonder if they are somewhere in openSuse? Or if there is some other explanation.
View 6 Replies View Related