OpenSUSE Network :: Torrent Stops Connection After Few Minutes 11.4?

Apr 1, 2011

When downloading a torrent after a few minutes my connection speed stops. Browser also. Same problem with Ktorrent and Deluge. The only way to solve the problem is to reconnect to my WLAN. I use a TP Link WR841N wireless router and a Toshiba satellite pro. The same setup is OK with windows and ubuntu 11.04 alpha3.

View 5 Replies


ADVERTISEMENT

OpenSUSE Network :: Mobile Broadband Drops It's Connection For Every 10 Minutes?

May 25, 2011

i am using mobile broadband to connect with network after i connecting mb.it drops it's connection for every 10 minutes.i need to restart to reconnect it.it is happening in kde.

View 5 Replies View Related

OpenSUSE Wireless :: Internet Connection Stops When Plug In Local Network?

Jul 25, 2011

I have a wireless cable modem/router and a PCI-E 1x wireless card in my desktop PC. It works perfectly until I connect my Ethernet cable to my local router and printer, no more internet connection. I am guessing there is a setting somewhere that tells the networking software that the hard wire connection is the primary internet gateway. How do I tell it to use the wireless as the primary gateway?

View 4 Replies View Related

OpenSUSE Network :: Eth1 Stops Accepting Connections Whenever There Is No SSH Connection Present On Eth0

Oct 2, 2010

I recently setup a new SUSE box for the purposes of acting as an ftp/sftp server. It's currently setup to run ProFTPD 1.3.3.rc3 and mod_sftp/0.9.7. The server has two internal network interfaces eth0 and eth1. eth0 is purely for internal use to accept ftp and ssh. eth1 is outward facing and receives connections from the WAN via SFTP over port 22. The problem I am facing is that after half hour to an hour eth1 stops accepting connections whenever there is no SSH connection present on eth0. I can't figure out why this is happening.

ProFTPD is setup as follows: SocketBindTight directive is on, default server and port are commented out.

[code]...

When the external interface is unreachable the proftpd and proftpd-sftp logs show no record of any connection attempt. I have noticed however if I leave eth0 down eth1 stays contactable without problem. Can anyone give me some pointers on what I can check to find out why this may be happening.

View 2 Replies View Related

OpenSUSE Network :: Torrent Downloading Always Stalled - Why

Nov 28, 2010

Everytime I download a torrent and ktorrent opens and starts downloading it it always sits at a stalled. What is wrong?

View 9 Replies View Related

Ubuntu Networking :: Internet Stops Working When Torrent App Is Active

Apr 18, 2010

This holds true in Transmission and NOT in Vuze. UPnP is enabled, ports are randomized and open each time. Pings to outside still work fine, but I cannot browse to websites (404 errors) when the app is running. I'm stumped, is Transmission locking all other in bound traffic/ports except the one it wants to use?

View 2 Replies View Related

Fedora Networking :: Network Connection Intermittent After DHCP Configuration - Stops Working Randomly

Jul 17, 2009

I'm having a bizarre problem where my network connection stops working randomly. At first I thought it was a DNS issue since Firefox simply chilled out on "Looking up [hostname]" until it timed out, but after further investigation (pinging IP's, "host" and "dig" being unable to reach servers) it became apparent that I couldn't even access the DNS servers i.e. the Wicked Connection of the East was most sincerely dead.

There are two strange things about this: one, there are no errors except "timeout". The network manager is happy, Firefox is happy until the lookup fails... Two, the failures only start *after* DHCP configuration. DHCP configuration never has any trouble sending or receiving packets. I'm going to try static IP and whatnot to see if that helps, more information later.

View 3 Replies View Related

Fedora Servers :: Samba Works For About 2 Minutes Then Stops?

Feb 20, 2009

I can't seem to figure this out. I've got a DOS disc that loads up a network share (my Samba server running Fedora 10) - connects to the share, runs ghost.exe from there. Everything runs perfect for about 2 minutes, then my thoroughput drops to 0. Sometimes, after about 40 seconds, it'll resume imaging. Most of the time, after about 40 seconds, Ghost gives me an error stating 'not enough free space on the destination disc' - This is a raid 5 3TB array that I'm ghosting a 6.0Gb HDD to!
lanman auth = yes and client lanman auth = yes are already set up - I can connect fine, but it's almost like Samba hiccups and drops my connection!

View 6 Replies View Related

OpenSUSE Network :: Knetworkmanager Needs 3 Minutes To Start And Connect?

Sep 3, 2010

Since two week the knetworkmanager needs 3 minutes after login to start and connect. On an other computer (x86) it works fine. What could be the reason for this? I use opensuse 11.3 x64 and yes i need the network manager. Ifup isn't practicable for me.I have read in some thread to start the networkmanager at boot time and as root, but i don't think this is necessary.

View 9 Replies View Related

OpenSUSE Network :: SuSE 11.2 Firewall Blocks Access After A Few Minutes

Dec 1, 2010

I have a fresh install of SuSE 11.2. I have installed Communigate Pro (Email server) and Webmin. From my workstation (on the same LAN), I can access the web interfaces for both CGP and Webmin right after the server boots up. But after about 10 minutes or so, I can no longer access either web interface. The server itself still functions normally. I can get on the internet with the server, and I can control Webmin via localhost:10000.

The only thing that allows me to connect to it from my workstation again is to either restart the server, or go into "Network > Linux Firewall" and click "Apply Configuration". What's going on that makes my remote access stop working?

View 3 Replies View Related

OpenSUSE Network :: DNS Settings And The Internet Connected, But Without The .exe Program It Just Disconnects After 10 Minutes?

Sep 13, 2010

i just installed open suse 11.3 after using linux mint 7(based on ubuntu 9.04).i am currently using two internet connections at home, the first is a vodafone mobile modem, which is workind excellent, and the other is a LAN network, that on windows uses a *.exe program to run. i managed to make all the IP, NETMASK, DNS settings and the internet connected, but without the .exe program it just disconnects after 10 minutes.this is the same thing that happens with the connections on windows if i start the computer and not run the "net.exe" program, but if that program is running the internet connections works just fine. i tried using wine to run net.exe, but it just gives an error message.

View 5 Replies View Related

OpenSUSE Network :: IPv6 Stops Working After Reboot

Aug 10, 2010

I have an issue on a few servers where IPv6 stops working after a reboot. I can ping anything within the same subnet but anything outside of that it gives me host unreachable. I believe that it is not routing for some reason, but I am not sure why. I have tried adding a default Ipv6 route for Eth3 but nothing seems to work.

uname -a
Linux server-1 2.6.27.19-5-default #1 SMP 2009-02-28 04:40:21 +0100 x86_64 x86_64 x86_64 GNU/Linux
Code:
route -A inet6
Kernel IPv6 routing table .....

View 9 Replies View Related

OpenSUSE Network :: Mounitng /dev/shm Stops IP Assignment On Boot?

Feb 13, 2011

I use static IPs in my network and IFup(traditional) this one is dual boot..when the boot sequence is at the point of assigning the Ip it counts down and fails. But after startup I can do a network restart and it assigns the IP properly. I am running 11.1 and also had this problem with 10.1. I am using /dev/shm mounted as a tmpfs as
the system seems to move a little faster this way and I recall reading that fglrx (ati proprietary driver) needs it. So here is the weird part If I do not mount /dev/shm it assigns the IP properly on boot....if I mount /dev/shm it will not. I just recently discovered this as with 10.1 I just lived with the problem...but on a dual boot machine it is really a pain. Does anyone have any clue where to look for the issue?? I have tried emptying shm and it of course does not matter as it is a ram device.

View 2 Replies View Related

Ubuntu :: Torrent Will Start Slow And Then, After A Minute Or So, It Slows Down And Stops Saying "starting Up"?

Dec 30, 2010

After upgrade from 10.04 to 10.10 on my dual core, 64-bit machine, my miro software has problems downloading torrents. Torrent will start slow and then, after a minute or so, it slows down and stops saying "starting up". It appears there is a bug report, bug 668615, but I've found no fix.

View 3 Replies View Related

OpenSUSE Network :: Error - Connection Timeout - All Wired Connection Over A Switch?

Feb 21, 2011

im on node1 when i type the command ssh node2@ip the terminal hangs up a bit then an error message stating that connection timeout but here is a thing: i cant ping to node2
but i can terminate the ping manually using ctrl+c when i terminate the ping usual message appears stating 10 packets transmitted, 100% loss

ps: when i go to node3 and ssh to node2 it works fine and also i can ping from node3 to node2 very fine. and the firewalls are down at all nodes -all wired connection over a switch

View 6 Replies View Related

OpenSUSE Network :: Can Make A Connection To Vpn Server, Connection Starts, But Nothing Happens?

Feb 2, 2010

I can make a connection to the vpn server, the connection starts, but nothing happens! My IP address remains the same as previous! There is nothing added to my Knetworkmanager, I'm a beginner I should use a pcf file for my vpn connection. I use it properly, I'm sure because the connection starts and an icon is added to my panel and remains until I disconnect.

I checked it via ifconfig -a, the last part (which is for vpn) is:

Code:
tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:141.213.169.76 P-t-P:141.213.169.76 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1390 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0

View 2 Replies View Related

Ubuntu Networking :: Torrent Is Cutting Off Connection To The Internet?

Sep 19, 2010

When I vuse client or torrent my connection to internet gets unstable.

View 5 Replies View Related

OpenSUSE Network :: Network Manager Default Connection Can Handle Virtual Interfaces?

Jun 7, 2011

I've not found how to configure more than one ip address with network manager.Nor with kde nor with plasmoid network manager.I need several virtual ip addresses for eth0 when the "default" of eth0 is connected i.e. "Connected to Auto eth0" should initialize the virtual interfaces.I have not found no even how to configure the ip address.I think this will be used from ifup config in yast or not?There I have the virtual interfaces but they are not taken from network manager.And last but no least: Is it possible that when using network manager the eth0 is enabled even no user has logged in?

View 4 Replies View Related

OpenSUSE Network :: No Network Connection After Firwall Settings Changed / Get It To Work?

Nov 17, 2010

I deleted the firewall files "K09SuSEfirewall2_init", "K01SuSEfirewall2_setup", "S11SuSEfirewall2_setup" and "S01SuSEfirewall2_init" from "/etc/rc.d/rc5.d" in order to disable the firewall when rebooting.

As a consequence all network services are not working. I can't connect to any other machine nor to the internet.

I rebuilt the symbolic files based on the ones for runlevel 3, but still no network services are available.

Any suggestions how to make it work again? I'm using Suse 11.3.

View 9 Replies View Related

OpenSUSE Network :: Configure A Connection With YAST As Well As With Network Manager?

Feb 1, 2010

Im new in this world of linux and suse. I have just installed the opensuse 11.2 in a Dell Inspiron 5160. Such laptop has a BCM4306 Wireless LAN controller. When I tried to configure a wlan connection, I found that the firmware was not installed. After looking in different forums, I installed the firmware b43. Now, my wlan card is abled to find the wireless of my router.

I have tried to configure a connection with YAST as well as with Network Manager, but both cases failled. Specifically, when I use Network manager, Im able to see in the applet my connection, how strong is the signal, but I see a yellow symbol (in one forum, such a box is shown with a green symbol).

I have check many time all about the secutity, encryption, and so one and all seems to be correct. But when I open the mozila firefox or the konqueror browser, no chance to surffer in internet. Now Im just a step to become crazy. The drivers are ok, the information about the router and the keys are ok, but in such a way, I am still harmloss.

View 1 Replies View Related

OpenSUSE Network :: Network 11.3 - Connection Refused When Try To Connect To SSH From Another Machine

Sep 27, 2010

I installed OpenSuSE 11.3. The only "extra" package I put in after the install was VirtualBox-ose. The firewall is disabled. I gave the machine a static IP address. I can get to the Internet from the machine. I enabled sshd to start on boot with "chkconfig sshd on" and also verified the service is running on the machine. I can ssh user@localhost from the machine as well.

When I try to connect to SSH from another machine, I get a connection refused. I verify that the firewall is down. I also try to get to VNC -- same problem: Connection refused. I ping the machine for fun. If I try to SSH again, it sometimes gives me a logon? I would check the server logs for the connection refused, but I wouldn't know where to look. I started in /var/log/messages, but nothing seemed to jump out there. I also find it strange because I can RDP to a windows guest running under VirtualBox. The Windows guest uses Bridged Network and DHCP.

I also find it interesting that I sometimes type a "ping google.com" from the 11.3 box and it will just hang - no output. Then I open firefox and get to the internet. All of a sudden, ping starts to give output. Could this be a neetwork card issue? A configuration issue? I don't know where to start.

View 1 Replies View Related

OpenSUSE Network :: Network Connection Fails To Go Past Router

May 16, 2011

So up until I updated from Opensuse 11.3 to 11.4, I hadn't any issues with my network connection. At least none worth mentioning. Once I installed 11.4, I've had weird issues with varying lengths of connection. Sometimes I can't connect anywhere, sometimes I can only get to the router, sometimes I'm 100%. I'd fiddle with YAST until everything worked. I honestly have no clue whether or not anything I did had any effect.

Enough of the iffy history, here's what's happening now. For the past few weeks up until last night, I have been at 100% connectivity. I never turned off my computer until last night (it just shut itself off, like the cord was unplugged. I dunno what happened, maybe it was my foot, maybe the PSU. I think it has happened before.). When I turned it back on, I was only able to connect as far as my router (192.168.1.1, a D-Link Gaming router that has always been very good to me). I could not make it to my modem (192.168.0.1, a Quest DSL modem. Once I can get here, then usually I'm good to go 100%).

I tried again this afternoon, and no change. I then get the crazy idea to unplug the ethernet cable from it's PCI-card home and return it to the onboard port (which I long ago declared defunct). Immediately after plugging it into that port, I ran "ping 192.168.0.1" and I started getting returns. I open up Firefox and try to load an external page, and nothing happens. I go back to the console that I was pinging from, and it had stopped. I start pinging my router, and no luck. What I conclude from my little experiment is that the router is not at fault.

1. It did not change at all between being at 100% and being at 0% after reboot.
2. I was able to get returns from the modem, past the router, for a brief period of time while using the defunct ethernet port.

Since I never had these problems before updating to 11.4, I'm inclined to believe that it was the update that started these problems.

View 9 Replies View Related

OpenSUSE Network :: Network Connections Didn't Have Connection

Jan 14, 2011

I just finished a fresh install of 11.3 on an HP 7900 small form factor and have no network connectivity. In Network Tools eth0 shows the state as inactive. Network Connections didn't have a connection, so after letting it create one there is no MAC address. I copied and pasted the MAC address from Network Connections eth0, set up a static address with default gateway, netmask, etc. all set appropriately and rebooted. Still no joy.

I want this to get an address via DHCP, I just set up a static address for testing.11.2 sensed the NIC without issue, but 11.3 doesn't seem to like me right now.I wanted to get this deployed on 40 machines today. Oh well.

View 2 Replies View Related

OpenSUSE Network :: Establish Connection To Network But Can't Get To Internet

May 16, 2011

I'm new in SUSE 11.4. My problem is: I'm using Alfa AWUS036H card. It's recognised and I can establish connection to my network, but cant get to Internet. I can't surf the web cos Firefox tell me that connection is timed out. Now I'm confused why I can't surf the web even if I'm connected. Also, I trayed to instal linux drivers for this card folloving Ubuntu "how to" and it just dont work.

View 4 Replies View Related

CentOS 5 :: Lost Connection After Some Minutes?

Apr 1, 2009

I have just installed a 5.2 centos under vmware ESX 3.5 as Virtual Machine and it works fine but ... after some minutes .. if I have opened a remote ssh session for example ... it is close .... and if I have running webmin ... it suddenly close

View 1 Replies View Related

Fedora :: Download A .torrent File:"/tmp/Manchester_Orchestra___I_m_Like_A_Virgin_Losing_A_ ___-1.torrent Could Not Be Opened?

Dec 7, 2010

I use deluge and it worked for a while then randomly I got this error message when trying to download a .torrent file:"/tmp/Manchester_Orchestra___I_m_Like_A_Virgin_Losing_A_ ___-1.torrent could not be opened, because an unknown error occurred.Try saving to disk first and then opening the file."

View 2 Replies View Related

Fedora Networking :: 14 - Connection To Wlan Is Cut After About 5 Minutes?

Jan 10, 2011

I installed Fedora 14 yesterday via the installation DVD with 3,3 GB. Everything worked fine and when I connected to my wlan and entered the WEP key I got access to the internet. But after about 5 minutes, to connection just got cut and I was again asked for the WEP passkey. But when I entered it this time, the connection failed and I was just asked again (with the same key entered, it even got it saved from last time). As you can think, this is quite annoying, since the time I have internet is not even enough to get some updates done.

Ah, and by the way: The time I have internet it just is unbelievably slow. On my Windows partation, I don't have this problem. I do have a small hint what might be the problem: When I was using Ubuntu, I always had a similar problem, but it did not even connect to my wlan once. The solution was to blacklist some driver, but since I don't know if this might be the problem on Fedora too and if the drivers are the same as on Ubuntu and since I really have no idea about the syntax of the terminal here, I was not daring to try this out.

View 3 Replies View Related

Networking :: OpenSwan VPN Drops Connection After 5 To 15 Minutes

Feb 18, 2011

Hello, I've installed OpenSwan with xl2tpd on my server, and set it up for roadwarriors connecting using certificates.

My server is Debian 5.0.8, I am running xl2tpd 1.2.0, and Openswan IPsec 2.4.12, my clients are all Windows, and I am testing my setup on a Windows 7 client.

I have no problem connecting to the server, but after some time the connection drops. I removed the idle option from the ppp config but it does not make any difference.

Even when I create constant traffic with ping -t the connection drops also.

I have no problems reconnecting right away.

I have been hacking at this for a couple of days, reading every post I can find, but I have not found a solution to my problem.

Here are my configs and logs:

CONFIG FILES:

/etc/ppp/option.l2tpd
-----------------------------
ms-dns 10.248.75.4
ms-wins 10.248.75.4
asyncmap 0
auth
crtscts

[Code]....

View 5 Replies View Related

General :: Wireless Connection Dropping About Every 2 Minutes?

Jan 28, 2011

I am having an issue with my wireless connection dropping about every 2 minutes (web pages timing out), then working for a couple of minutes then dropping again. The connection icon in the task bar says I'm still connected at about 70%.I have a dual boot system and the wireless works fine in opensuse but not in Ubuntu 10.10 I have an Asus G50vt-X5 laptop but I am not sure about the wireless chipset.

View 10 Replies View Related

Ubuntu :: Internet Connection Gets Disconnected Within 2-3 Minutes / Fix It?

Jan 28, 2009

I'm using Xubuntu and i have set up my DSL connection manually. I get disconnected from the Internet within 2-3 minutes. I have to again select eth0 from the network icon in the taskbar. it connects well but gets disconnected again and again. I don't face such problem when i use Win XP.
Any idea what might have gone wrong ?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved