the codeigniter didn't work in my Fedora,the welcome page,when your codeigniter works,it will shows,but it doesn't appear.the same step,it can work in Windows. What's the problem?
View 4 RepliesI recently moved from Ubuntu Desktop to Ubuntu Server. I have a Dell D600 acting as a three prong firewall. I use a Netgear FA120 USB NIC for the third prong. After converting to Server, the NIC detects as Eth1. I'm able to configure an IP, but the NIC never sends or receives packets. The same NIC works great in Ubuntu Desktop. Dmesg never shows the NIC being ready.
View 3 Replies View RelatedI use .htaccess to deny all ip addresses except certain to an internal wiki on a subdomain.
Code:
If access is denied to the homepage users are shown the Fedora test page instead of my own custom 403 error page. When I go to a page - not home - I see a standard 403 error page.
Code:
Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request. Apache/2.0.54 (Fedora) Server at wiki.domain.com Port 80. What am I missing here? Seems like my ErrorDocument is not being reached..
when I try to view my root directory of my website.if I go to URL... on my computer, it always loads the "It Works!" page. I deleted the original index.html page, and even replaced it - but if I go to URL... it KEEPS coming up.If I specify the page I want to view, ie.URl... it loads the right file.Is there a setting in the conf file that Im missing?
View 3 Replies View RelatedThis web page....the Java works fine...the sound does not work. I am using Ubuntu !0.10...it worked in 10.04 but not now. [url]
View 9 Replies View RelatedI have apache httpd server on my Fedora 10I got 2 problems:First : I copied the web page files to its Document Root <var/www/html> & Disabled the default web page. But when I visit http:/localhost ，it shows up the list of files in <var/www/html> as if a ftp server browsed in web page. So how can I set http://localhost load my default web page index.html ?Second :I want to set up a web server on Internet through my router . I applied for DDNS account & input it into router correctly . I set virtual host in server to redirect any access from port 80 to 192.168.1.2:80 in LAN . Just for in case , I also download and running the DDNS software & installed it on PC 192.168.1.2 in LAN . My DDNS provider is oray.cn . It's a Chinese server provider . I don't think there is anything wrong with oray.cn . But if you need its information just visit oray.cn (Google can translate it for you). So I want to know did I miss something to set up a web server in this kind of situation
View 2 Replies View RelatedI'm trying to make some pages. For this I try to host them locally. However, when I have an error in my PHP code, the server shows an internal error 500 page and doesn't show on what line and what compile error it encountered. There is no such information in the error log either. What should I do about it, it's not really nice to comment all the lines and then try to uncomment them one by one. I've been googling for a while, but didn't find anything.. I forgot to mention, I;m using Fedora :P, the apache that came with it and mysql and php from the repository...
View 3 Replies View RelatedI would like to have the opensuse 10.3 DVD for installing gcc. (I lost the original DVD and with opensuse 11 my laptop does not work) Do you know a webpage where I can download it? The official page doesn't work.
View 6 Replies View RelatedDell Mini 9, 2GB RAM, 32 GB SSD, Ubuntu 10.04 UNR . At Panera, and other places that have free Internet access but require signing in on a page they load, I cannot get on to the Internet. Their sign-in page comes up on my iPod Touch but does not come up on my DM9. This happens no matter which browser I have running on my DM9 (I have Firefox and Chromium). And since I can't sign in, I don't get onto the Internet. Initially I am connected to their router and the signal is strong but because I don't sign in (I'm assuming here), I am disconnected. What do I need to do to see their sign-in page so I can get connected. At locations that have no sign-in pages I have no problems whether or not a password is required.
View 3 Replies View RelatedServer: CentosClient: F11Remotely it doesn't work
Code:
tftp 10.0.0.2
tftp> status
[code]....
I recently installed Fedora 13 on VMware 7 environment without X window. sshd did work fine, but when I tried to put it into xinetd, it doesn't work any more. Here is what I have done so far :
I stopped sshd. #service sshd stop
and I configured xinetd.conf like below.
Quote:
#
# This is the master xinetd configuration file. Settings in the
# default section will be inherited by all service configurations
# unless explicitly overridden in the service configuration. See
# xinetd.conf in the man pages for a more detailed explanation of
# these attributes.
[Code]....
I don't know what I did wrong with them. I configured xinetd.conf, and I made service configuration file 'ssh' in /etc/xinetd.d, and I restarted xinetd.
What am I supposed to do to make a life on my sshd within xinetd ?
I'm trying to print a PDF from Evince it don't work at all...
When I try to print in grayscale it send a blank paper to the printer...When I try to print anything in color I can't change the margin of the paper, it always put like ZERO margin and the text go throw the end of the paper.
The paper size is A5 (Half A4) and the printer is in LAN in a Windows computer.
It's me or when I print in grayscale it print faster? So, it's an update or something? Because last time I printed from Ubuntu (like a month ago) it printed perfectly OK in grayscale (I don't know about the margin).
A week ago or so neither ssh nor scp were working when attempting to connect to my on-campus computer from home. ssh was complainig about the key not matching and I figured out I could just delete the config file it was reading the (now old) key from and let it create a new one with the updated key upon prompting me whether or not to trust the remote host.
However, even though ssh is now working, I can no longer use scp. I issued scp -v and discovered a bunch of errors. scp prompts me for the remote password and even prints the message of the day on the remote computer but then just hangs and doesn't seem to be copying any files. I'm sure the issue is with the whole key change issue but I can't quite figure out why ssh would be working just fine and scp would be failing.
Trying out opensuse with gnome.. why ATI drivers works on kde, and doesn't work on Gnome? Fells like theres no installed drivers at all :/
[URL]
I've got 9.04 and 9.10 both installed on the same machine. The /home directory is on a separate partition, so both OSes use the same /home.I can't get Compiz to work at all in 9.10, even though it's been perfectly fine in 9.04. Is there a backport of some sort that i should install?The fixes I've found all point to editing the xorg.conf file, but of course, Karmic doesn't have an xorg.conf file.I've tried reinstalling the Compiz files, reinstalled the open-source video drivers, installed/uninstalled fglrx drivers a few times, rebooted dozens of times.
View 8 Replies View RelatedI am using Ubuntu 9.10..My sound works fine unless I have headphones plugged in. I've tried 2 sets of headphones, and it doesn't work with either set, so it's not the headphones. The volume is not muted (it's at 100%) for the headphones either in alsamixer. How can I diagnose and fix this?
View 8 Replies View RelatedWhen I connect to my workstation via Real VNC Viewer 4 to Xvnc running on the workstation, and running "su -" I get authentication failure as follows:
So, effectively I cannot su when connected via VNC.
But if I'm at my workstation, I can su just fine:
Nov 18 16:24:30 localhost su: pam_unix(su-l:session): session opened for user root by xyz(uid=500)
Interestingly enough, I cannot su to my own userid over vnc, i.e. su xyz
In /var/log/secure I get:
I suspect it has something to do with PAM, but cannot figure it out.
I am having an issue with my server I have setup. I have apache running and can access the files via all other computers on my network via the ip address i have it set to default to the /var/www folder with index.html as the main file. I am however having issues trying to access it from my other IP the one i found at what is my ip. I have even setup a no-ip address to it. I've forwarded port 20 and port 80 i've even given it the default dmz. I disabled the firewall on my router and I checked and my Ubuntu machine doesn't have a firewall whatsoever i can access my outside ip on the local machine and have access the problem i'm having is trying to access it from anywhere but home. [URL]
View 9 Replies View RelatedI'm following how to instruction by [url] I cannot get sites working.
View 7 Replies View RelatedI have browser-plugin-gnash installed and I am using Debian Squeeze. In Chromium, I get the message "You need to upgrade your Adobe Flash Player to watch this video." whereas it works in Iceweasel.
View 1 Replies View RelatedI've recently installed KDE 4.4.1 just to try on a Dell 1545 laptop with Ubuntu 9.10 previously installed.
My problem is that the wireless connection works just perfectly with nm-applet under Gnome, but when I login on KDE and ask KNetworkManager to connect to the same network as before, it can't finish the connection.
When I choose the connection the program asks for my passphrase, I type it and then it just sticks on "activating network" and nothing happens.
My experience with KDE is zero, so I don't even know where to start looking. I'd even tried to kill KNetworkManager and try to replace it with nm-applet, but I think there's a daemon that restarts it immediately.
Ive been having some troubles with wireless. Ethernet works but wirless (at first) doesn't work. However, when i plug the ethernet in, all the wireless networks it detects are populated and i can then connect until i shutdown my computer.My disable internet button on my computer also doesn't seem to work well. It is always blue, and when i press it and have internet connection estabsliehd, it erratically turns from blue to orange to blue and then stays on blue.
When i have shutdown and booted up and i haven't placed ethernet in (so wireless doesn't work) it wont even change color.Any solutions? I dont know what info to include so just let me know and when the wireless does it work, it is slow in opening a new tab and connecting to google.
Works fine when I have the laptop plugged into the mains and will happily switch from 3.5mm to speakers and back again.
But for some reason, when the laptop is on battery I don't get any sound and all, from the 3.5mm or the speakers.
Samsung Q430 laptop
Ubuntu 10.10 x64 (fully up-to-date)
I have installed RHEL4 on my desktop machine . Done all the setting in /etc/pam.d and finally my rsh and rlogin works from my machine(rsh the same machine)
[root@linux tmp]# rsh 10.121.113.92
Last login: Tue Sep 28 18:00:22 from BLE
You have new mail.
[root@linux ~]#
[Code]....
Code:
192.168.0.133:/openils /openils nfs4 rw,_netdev,auto 0 0
fails to mount the nfs4 share, however
[code]...
I'm using a basically vanilla Lubuntu 11.04 My Logitech E 3500 webcam works fine with Cheese. I have just installed Skype, but my voice isn't picked up on the test call, and no video either (the webcam light remains off). I've tried logging off and into Skype.
View 5 Replies View RelatedI've been using curl in a script of mine for a while on Ubuntu 9.10, without problems.
Ubuntu 9.10 got the following curl installed through apt-get:
ii curl 7.19.5-1ubuntu2 Get a file from an HTTP, HTTPS or FTP server
[code]....
I have a sony laptop VGN FS315M, i recently installed Ubuntu 11.04, and i really love the unity interface.
But i have a few issues as well:
1. Vaio FS315M has Nvidia graphics card, ubuntu suggested a video card driver which i installed but didn't work well so i switched to the another one and it worked generally well but that too has problems like if my computer goes to sleep upon closure of lid, it cannot wake up again. it shows only a white screen and only way to get out of it is to restart the computer by manually pressing start button.
2. Sound card works generally ok but mic doesn't work on startup but when i click sound preferences and mic selection from analog microphone to another one and then again to analog microphone, it works but not the first time. Sound output is low compared to windows.
3. Arabic/persian fonts generally are not shown well in firefox?
4. Computer seems to be slow in unity compared to 10.10, may be because of high demand on graphics or the graphics card is not optimized?
5. Skype won't start automatically and there's no option in this skype to do so and also it doesn't save password?
6 . Ubuntu doesn't connect to net connection unless i connect manually, i want it to connect automatically to internet
7. This issue is not related directly to ubuntu. My system is a dual boot system with windows xp as well. Before windows xp, i tried windows 7 beta and then later removed it but it left its bootloader at startup. since my CDROM drive is also out of order so i tweaked BIOS by installing PLOP to install ubuntu. Now i have 3 startup menus if i want to run windows xp, one for ubuntu, then windows 7 with option for earlier version, when i select earlier version then windows xp or PLOP installer. so its a mess. I want PLOP to appear at the beginning (so that i can have boot option from USB available), then ubuntu and if i select windows it should go directly to xp not thru others.
The tap of the touchpad not working in Fedora 14 have to click with the left button of the laptop.
View 4 Replies View RelatedI have an apache server and /var/www/html/index.html startpage working fine. But I want to have files accessed by apache in my /home/beny/ director.
View 8 Replies View Related