Fedora Servers :: F13 - HTTPD System Config Tool Does Not Work
Jan 17, 2011Am I right in thinking that the system-config-httpd tool doesn't work in Fedora 13?
View 1 Replies
ADVERTISEMENT
Fedora Servers :: System-config-httpd Wont Save?
Aug 16, 2011Configure the HTTP server via system-config-httpd brings up some nice gui.I start a console, login to root and start it with: system-config-httpdGoto tab Virtual Hosts, then addI name my Virtual Hosts "sea", set its document root to: /home/sea/webs/sea.hs/www
where index.php is located for that 'local test server'.Host information is on Name based Virtual Host.But what do i have to enter for IP Adress and Host Name? Neither of these accept 127.0.0.1 nor localhost Further, when i try to exit, it wont let me close the app.Its not saved, hence i can even delete the default virtual hosts and its there again after restarting the app Even with adding sea /home/sea/webs/sea.hs/www or sea localhost.localdomain localhost to /etc/hosts doesnt change anything
Fedora Servers :: HTTP Config Tool Not Running On F12
Mar 23, 2010I just done a brand new install of fed12 and did all the yum updates. Apache seems to start ok and I always liked the http config tool but it won't run on Fedora 12. I downloaded and installed system-config-httpd.noarch 5:1.4.6-1.fc12 and it all went fine but when I try to start it I get the usual box asking for my root password, I type it in and press enter, the box disappears and then....nothing. If I run system-config-httpd in a terminal I get the same box asking for root passowrd but when I enter it I get a long scroll of text which ends with:
line 4: 2137 Aborted (core dumped) /usr/bin/python /usr/share/system-config-httpd/ApacheConf.py
I don't know what causes this. Is there any way to get the http config tool working?
Fedora Servers :: Httpd Starts But Doesnt Work ?
Mar 18, 2009I want to run a web server.
I've done
When i do [url] i get a blank page.
Ubuntu Servers :: Config - Change / Add From The Default OpenSSH Config Files To Get Tunnelling To Work?
Jul 10, 2011I'm running Ubuntu Server 11.04 with OpenSSH, trying to create an ssh tunnel (for web traffic) to it from my (also Ubuntu) laptop. This is the command I'm using to create the tunnel:
Code: ssh -ND localhost:8080 george@192.168.1.20 I had it all working on a virtual machine.. which was deleted What settings/lines do I need to change/add from the default OpenSSH config files to get tunnelling to work? I've Googled and AllowTcpForwarding is set to yes, as is X11Forwarding.. but it still doesn't work. Chrome can connect to the server, but says the connection was closed before any data was sent.
Fedora :: System Display Config Does Not Work?
Jun 17, 2010When I click on System Administration Display I get the root pasword entry. I enter the root password and then nothing. I stumbled on another way to set the resolution before but I can't find it now
View 5 Replies View RelatedFedora Networking :: Config The Httpd Apache Server To Upload Files
Jan 6, 2011my task is to store the data to a file at server sent via HTTP POST, i written suitable cgi script in C, but the PROBLEM is that i can't complete the task, I guess i require server permission to do so, how to configure server or how to get access right from server to store data to a file.
View 3 Replies View RelatedFedora :: NTFS - Config Tool Will Not Open And Gives Error
Sep 10, 2009When logged in as my standard user in Fedora 11 gnome desktop the installed ntfs-config tool will not open and gives an error which says this; "no authentication program found", and to run that ntfs-config as the root in a terminal. So then the only way to open that tool is to type that in a terminal, and it did open, but how can I fix this ? Can this issue be related to ownership and permissions of it ? Also the num lock does not come on during boot up, is there a easy fix for that too ? This is a recent fresh updated install from the DVD with the ext4 file system. All the ntfs-3g applications are installed as default, so I just added that enable ntfs write support tool with the package manager.
View 2 Replies View RelatedCentOS 5 :: System-config-samba Doesn't Work?
Feb 24, 2010system-config-samba doean't work from terminal neither it is shown in graphical mode, i cannot see system > administration > servers. Server is missing.
View 1 Replies View RelatedFedora Servers :: Can't Get Httpd To Index
Feb 28, 2009I am tyring to setup my webserver on Fedora 10 to do the following.
first, i want to require logins when people access my machine. This i have working through the .htaccess file.
Second, i want directories that do not have an index.html file to be auto indexed. This is where its not working for me. I get a 403.
the only change from the default setting in the httpd.conf file is AllowOverride AuthConfig
it would seem that the default settings for are
<Directory "/var/www/html">
Options Indexes FollowSymLinks
AllowOverride None
Order allow,deny
[Code].....
IF i put an index.html file in sub/ i no longer get a 403, i just get that file.
Fedora Servers :: HTTPD - How To Setup GUI
Apr 27, 2010I have Fedora 12 x86_64 installed in my computer. I have also installed system-config-httpd, but when I go to System --> Administration --> Server Settings --> HTTP, nothing shows up.
View 4 Replies View RelatedFedora Servers :: Httpd And Apache2 Conflict?
Jul 4, 2009httpd have been install by default and I don't start it as services. I have install apache2 but don't want to start as service, I can't add it into the chkconfig. When I try to remove httpd, fedora also want to remove these software.
gnome-user-share i586 2.26.0-2.fc11 installed 809 k
httpd-manual i586 2.2.11-8 installed 3.5 M
mod_perl i586 2.0.4-8 installed 6.3 M
[code]....
php and webalizer I don't care as I want to install the new version, but is their any problem removing the other one? Also I want to pount the apache2 documentroot to var/www/httpd but when I do this and try to see the website I got a 403 error (not autorize)
Fedora Servers :: Run Tomcat Behind Apache Httpd?
Dec 19, 2009I just did a clean install of FC12 x86_64 and want to configure tomcat to run behind apache httpd. What is the easiest way to accomplish this? I'm a newbie at server configuration so detailed instructions would be nice
View 4 Replies View RelatedFedora Servers :: HTTPD Does Not Start On Boot
Jun 24, 2010On this system httpd does not start on boot. I can manually start it without errors with service httpd start.
Code:
chkconfig --list httpd
httpd 0:off 1:off 2:on 3:on 4:on 5:on 6:off
Where do I look to see why it wont start?
Fedora Servers :: HTTPD Dual Nic Using Eth1 Instead Of Eth0
Mar 2, 2009I've just setup Fedora 10 x64 on a Supermicro 7045 with dual nic; I setup a web site and ran into a strange problem; I can't see my website from outside my LAN; checking IP on Internet it sees my IP as coming for my dynamic IP (IP of router/switch) and not my static IP.
eth0: Static IP
eth1: Dynamic IP
These are standard Intel 82563EB Dual-Port Gigabit Ethernet Controller.
Is there a way to specify the order in which it sees the nic ports?
I'm wonder if I can mix Static and Dynamic IP's; on the outside they resolve to a static IP; the dynamic one shows up as my router/switch IP; but it allows me to access my DHCP computers; this isn't a web server; but a development machine for writing PHP apps.
Where 123.123.123.3 is my static IP address.
I should mention that nmap -v -p 80 123.123.123.3 shows an open port on 80
My VirtualHost is setup like:
Fedora Servers :: Service Httpd Restart - Broken In F11?
Jul 5, 2009Has anyone noticed that when using NameVirtualHost's in apache that the service httpd restart command is broken?Also it seems system-config-bind has glitches too.
View 10 Replies View RelatedFedora Servers :: Apache Httpd Doesn't Start On 11
Sep 3, 2009I have just installed Fedora 11 on a "fresh machine" and everything works ok, except for Apache httpd
the message seen in the error_log is the following: Name or service not known: mod_unique_id: unable to find IPv4 address of "myserver"
Fedora Servers :: Add Pages To /var/www/httpd And Permissions Denied
Oct 28, 2009I installed apache and all is well until I had to add pages to /var/www/httpd and permissions are dinied.
View 1 Replies View RelatedFedora Servers :: Secure - Httpd Tomcat Mysql
Dec 19, 2009I just installed FC12 x86_64. After a clean install I found that httpd, mysql, svn, svnadmin, etc are already installed. I still need to install and configure tomcat running as a worker behind httpd and configure everything. But my question is about security. What do I need to do to ensure that when I start httpd and mysql that they are secure? Are there default settings that I need to change? Are there security patches I need to apply?
System Config:
Fedora Core 12 x86_64
AMD Athlon II X2 250 3.0 GHz dual core
GIGABYTE GA-MA785GM-US2H
G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory Model F2-8500CL5D-4GBPK
Fedora Servers :: Apache Configuration And HTTPD Services
May 29, 2010I have Apache Server working online under Fedora Core 6. But before I installed and configured everything, I've been testing in Fedora 12. The problem surges here, when I start the httpd service, every supuse 404 action on a web browser, takes me to localhost. I mean, if I enter google.com, no error, just goes to localhost, http://asdasd, no error, gives back localhost. I used to ignore the problem 'cause I thought it was a problem on my apache, but when I installed the Server on the Fedora Core 6 machine, I found that I have the same problem there. Of course, it only occurs when I am browsing through the same machine that has httpd started. Does anyone know how to change that??
View 6 Replies View RelatedFedora Servers :: HTTPD Fails To Start On Boot
Aug 24, 2010I'm completely stumped by a problem with httpd in Fedora 13. It fails to start on boot: I can see: Starting htpd: FAILED, in /var/log/boot.log, but I can't find anything else in messages, audit.log or anywhere else that gives me any clue why. The weird thing is that running:
run_init service httpd start
after boot _works_ and the server runs fine, but even when it's running OK,
service httpd status
reports
httpd dead but subsys locked
I'm guessing that the problem somehow relates to selinux, but I can't find anything in the audit logs that gives me a clue. How to turn on more logging so that I can get closer to the problem. I finally discovered the cause. This system was originally configured to use network services directly, without NetworkManager. It had been upgraded a number of times since installation. It seems that over time, if you have turned off NetworkManager, the defaults have changed. Used to be that the network services was 'enabled' by default (hence started at run time). Now, the default is 'disabled'. Httpd couldn't start because there was no network to start on. Enabling network services at boot time fixed this. I guess I should have noticed this. But one might think that httpd failing to start because of the lack of a network might at least give a warning message in the logs about the reason.
Fedora Servers :: Find The Httpd.conf Files In FC11?
Aug 6, 2009Where can I find the httpd.conf files in FC11 ??
View 1 Replies View RelatedFedora Servers :: Upgrade From 10 To 11 Breaks Service Httpd Restart?
Mar 22, 2010Alright, so I upgraded my old fedora 10 server to Fedora 11 with a netinstall CD, but now service httpd restart is broken. I already had to delete the old config file and reinstall apache, but now I can't restart it. I can kill it and then start it manually, but it never stops the running instance and fails to bind the port. I know it's because /var/run/httpd/htpd.pid is in the wrong place, which would be /var/run/httpd.pid, but do I have to make a symlink every time I want to restart it? I edited all the config files to point to the right place, but the system does not honor them. What do I do?
View 3 Replies View RelatedFedora Servers :: Install Of Httpd-devel Hurts Performance?
Jun 7, 2010On F13 i386 inside Virtualbox. Host is a Win7 x64 box.
This may just be more idle curiosity than anything else since the server still works. . . but it's really bothering me because I can't explain it.
My (limited) understanding is that the devel files are just the source files and shouldn't actually affect peformance.
Yet, prior to installing httpd-devel (and its dependencies), /etc/init.d/httpd restart takes about 2 seconds total. After installing httpd-devel, the "stopping" phase of the httpd restart take 5-7 seconds (which seems really long when you're just sitting there waiting on it.
yum install httpd-devel also installs the following for dependencies:
db4-cxx
db4-devel
cyrus-sasl-devel
apr-devel
apr-util-devel
openldap-devel
expat-devel
All but one of those are devel files as well. And here's the real kicker: Uninstalling them through YUM doesn't put things back to normal (even after reboot).
I'm no linux expert. But I wouldn't think installing devel files would have this effect or any effect like this since they're just source code files (?). Can anyone explain what's happening or give me tips on how I can watch the apache process stop and see what's hanging it up?
Fedora Servers :: HTTPD Service Does Not Start - Could Not Bind To Address
Nov 17, 2010I have one problem regarding my web server. When I am try to restart my httpd service it shows...
[root@localhost ~]# service httpd restart
Stopping httpd: [FAILED]
Starting httpd: (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs [FAILED]
[root@localhost ~]#
Fedora Servers :: Suexec Set Up In Apache, Snippits From Httpd.conf?
Jun 25, 2011I'm having a problem with mod_suexec in Fedora 15.I have suexec set up in Apache, snippits from httpd.conf:
Code:
LoadModule suexec_module modules/mod_suexec.so
...
[code]....
Fedora Installation :: Start The Service Of Httpd Error Message Displayed: Starting Httpd: (98)Address Already In Use ?
Sep 19, 2010I have installed fedora 13 in my system. httpd server is also installed. when I tried to start the service of httpd, following error message displayed: Starting httpd: (98)Address already in use: make_sock: could not bind to address [::]:80
View 1 Replies View RelatedFedora Servers :: Localhost Httpd Server Doesnt Have Internet Connection
Jan 5, 2010i have installed apache and php in my fedora 11 system and httpd works fine except that it doesnt have internet connection for example rapileech doesnt work it says "cannot connect via port 80" and if i put an rss feed collector in a website it doesnt work but everything else works fine , also when i put the same file in a shared web host it works fine
View 3 Replies View RelatedFedora Servers :: Junk Added To HTML Files (HTTPD / VSFTPD)
Feb 16, 2011I've just upgraded my serv from fedora8 to fedora12 and got a problem. The httpd and vsftpd add a junk in the beginning of html files. Png, tar and other files are ok. When I make a request to localhost everything is ok.
Code:
#telnet localhost 80
GET /1.html
<html>
</html>
but from any other computer.
Code: .....
But this is not an apache problem. When I dl html files from ftp I got the same problem. Iptables is swithed off.
Ubuntu :: Where Is The Service Config Tool - GUI - In 9.10
Mar 14, 2010The service config tool is missing. the tool let you config what service need to be run/disable in what run level. but I can't find it after I upgrade to 9.10 at all.
View 2 Replies View Related
