Basicly just installed a fresh version of Cent OS 5.4 with apache httpd installed automaticly during the installation. The http daemon is running and when navigating to localhost i get the welcome cent os apache page thingy. The problem is when i put an index.html file in /var/http/www then try and navigation to localhost I get a 403 forbidden error.
I have my home network up and running. I can access my index file by the ip I gave to eth0 - 192.168.0.2
I put this same ip into etc/hosts: 192.168.0.2 localhost localhost.localdomain One space separates the hostnames from the ip in /etc/hosts. The hostname command returns: localhost.localdomain
I have /etc/resolv.conf configured the right way, so I can use my isp's DNS servers. I know this because yum works and I can ping anywhere by url. The next step is to learn to access the index file by url locally on my own network.
I have Fedora 12 x86_64 installed in my computer. I have also installed system-config-httpd, but when I go to System --> Administration --> Server Settings --> HTTP, nothing shows up.
I am running a few virtual domains on Apache/Fedora 9. I have some domains working fine but when I tried to put up another one today I get "Directory index forbidden by Options directiveL : /home/jek/www/AAA/" Now here's the weird part. That message appeas in the error log for domain AAA, whereas the new domain is BBB and has it's own log files defined in httpd.conf. On the browser the Fedora test page is displayed. SELinux is turned off.
My setup is two laptops connected by crossover cable. One runs Windows xp the other Fedora 13. Neither is connected to internet. I'm using a subnet of 192.168.1.x On Fedora eth0 is up, apache runs because it creates pidfile. Everything pings fine. Windows xp ip pings fine from command line. Gave Windows xp a static ip of 192.168.1.1 mask 255.255.255.0 and gateway 1.2, same as eth0. xp says it sees the server. eth0 is up.
DirectoryIndex looks at index.html. I created that file with very simple code and put it in document root. Document root permissions are 755. Access_log 770. Error_log 644. Apache User 755. Listen 80 When I type the ip for eth0 (192.168.1.2) into firefox, firefox gives me an error message - can't find server. The connection status says its connected.
The error log includes a line: [warn]./mod_dnssd.c:No services found to register I don't know what this means. Apache is not writing to access_log. When I cat the path to access_log I get nothing, then a command prompt. I'm looking for the part I'm missing that will let Apache serve that index.html file to firefox so I can see how my code looks to firefox as I go.
httpd have been install by default and I don't start it as services. I have install apache2 but don't want to start as service, I can't add it into the chkconfig. When I try to remove httpd, fedora also want to remove these software.
gnome-user-share i586 2.26.0-2.fc11 installed 809 k httpd-manual i586 2.2.11-8 installed 3.5 M mod_perl i586 2.0.4-8 installed 6.3 M
[code]....
php and webalizer I don't care as I want to install the new version, but is their any problem removing the other one? Also I want to pount the apache2 documentroot to var/www/httpd but when I do this and try to see the website I got a 403 error (not autorize)
I just did a clean install of FC12 x86_64 and want to configure tomcat to run behind apache httpd. What is the easiest way to accomplish this? I'm a newbie at server configuration so detailed instructions would be nice
I've just setup Fedora 10 x64 on a Supermicro 7045 with dual nic; I setup a web site and ran into a strange problem; I can't see my website from outside my LAN; checking IP on Internet it sees my IP as coming for my dynamic IP (IP of router/switch) and not my static IP.
eth0: Static IP eth1: Dynamic IP
These are standard Intel 82563EB Dual-Port Gigabit Ethernet Controller.
Is there a way to specify the order in which it sees the nic ports?
I'm wonder if I can mix Static and Dynamic IP's; on the outside they resolve to a static IP; the dynamic one shows up as my router/switch IP; but it allows me to access my DHCP computers; this isn't a web server; but a development machine for writing PHP apps.
Where 123.123.123.3 is my static IP address.
I should mention that nmap -v -p 80 123.123.123.3 shows an open port on 80
Has anyone noticed that when using NameVirtualHost's in apache that the service httpd restart command is broken?Also it seems system-config-bind has glitches too.
I have just installed Fedora 11 on a "fresh machine" and everything works ok, except for Apache httpd the message seen in the error_log is the following: Name or service not known: mod_unique_id: unable to find IPv4 address of "myserver"
I just installed FC12 x86_64. After a clean install I found that httpd, mysql, svn, svnadmin, etc are already installed. I still need to install and configure tomcat running as a worker behind httpd and configure everything. But my question is about security. What do I need to do to ensure that when I start httpd and mysql that they are secure? Are there default settings that I need to change? Are there security patches I need to apply?
System Config: Fedora Core 12 x86_64 AMD Athlon II X2 250 3.0 GHz dual core GIGABYTE GA-MA785GM-US2H G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory Model F2-8500CL5D-4GBPK
I have Apache Server working online under Fedora Core 6. But before I installed and configured everything, I've been testing in Fedora 12. The problem surges here, when I start the httpd service, every supuse 404 action on a web browser, takes me to localhost. I mean, if I enter google.com, no error, just goes to localhost, http://asdasd, no error, gives back localhost. I used to ignore the problem 'cause I thought it was a problem on my apache, but when I installed the Server on the Fedora Core 6 machine, I found that I have the same problem there. Of course, it only occurs when I am browsing through the same machine that has httpd started. Does anyone know how to change that??
I'm completely stumped by a problem with httpd in Fedora 13. It fails to start on boot: I can see: Starting htpd: FAILED, in /var/log/boot.log, but I can't find anything else in messages, audit.log or anywhere else that gives me any clue why. The weird thing is that running: run_init service httpd start after boot _works_ and the server runs fine, but even when it's running OK, service httpd status reports httpd dead but subsys locked
I'm guessing that the problem somehow relates to selinux, but I can't find anything in the audit logs that gives me a clue. How to turn on more logging so that I can get closer to the problem. I finally discovered the cause. This system was originally configured to use network services directly, without NetworkManager. It had been upgraded a number of times since installation. It seems that over time, if you have turned off NetworkManager, the defaults have changed. Used to be that the network services was 'enabled' by default (hence started at run time). Now, the default is 'disabled'. Httpd couldn't start because there was no network to start on. Enabling network services at boot time fixed this. I guess I should have noticed this. But one might think that httpd failing to start because of the lack of a network might at least give a warning message in the logs about the reason.
Alright, so I upgraded my old fedora 10 server to Fedora 11 with a netinstall CD, but now service httpd restart is broken. I already had to delete the old config file and reinstall apache, but now I can't restart it. I can kill it and then start it manually, but it never stops the running instance and fails to bind the port. I know it's because /var/run/httpd/htpd.pid is in the wrong place, which would be /var/run/httpd.pid, but do I have to make a symlink every time I want to restart it? I edited all the config files to point to the right place, but the system does not honor them. What do I do?
On F13 i386 inside Virtualbox. Host is a Win7 x64 box.
This may just be more idle curiosity than anything else since the server still works. . . but it's really bothering me because I can't explain it.
My (limited) understanding is that the devel files are just the source files and shouldn't actually affect peformance.
Yet, prior to installing httpd-devel (and its dependencies), /etc/init.d/httpd restart takes about 2 seconds total. After installing httpd-devel, the "stopping" phase of the httpd restart take 5-7 seconds (which seems really long when you're just sitting there waiting on it.
yum install httpd-devel also installs the following for dependencies: db4-cxx db4-devel cyrus-sasl-devel apr-devel apr-util-devel openldap-devel expat-devel
All but one of those are devel files as well. And here's the real kicker: Uninstalling them through YUM doesn't put things back to normal (even after reboot).
I'm no linux expert. But I wouldn't think installing devel files would have this effect or any effect like this since they're just source code files (?). Can anyone explain what's happening or give me tips on how I can watch the apache process stop and see what's hanging it up?
I have one problem regarding my web server. When I am try to restart my httpd service it shows...
[root@localhost ~]# service httpd restart Stopping httpd: [FAILED] Starting httpd: (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down Unable to open logs [FAILED] [root@localhost ~]#
Configure the HTTP server via system-config-httpd brings up some nice gui.I start a console, login to root and start it with: system-config-httpdGoto tab Virtual Hosts, then addI name my Virtual Hosts "sea", set its document root to: /home/sea/webs/sea.hs/www where index.php is located for that 'local test server'.Host information is on Name based Virtual Host.But what do i have to enter for IP Adress and Host Name? Neither of these accept 127.0.0.1 nor localhost Further, when i try to exit, it wont let me close the app.Its not saved, hence i can even delete the default virtual hosts and its there again after restarting the app Even with adding sea /home/sea/webs/sea.hs/www or sea localhost.localdomain localhost to /etc/hosts doesnt change anything
I have installed fedora 13 in my system. httpd server is also installed. when I tried to start the service of httpd, following error message displayed: Starting httpd: (98)Address already in use: make_sock: could not bind to address [::]:80
i have installed apache and php in my fedora 11 system and httpd works fine except that it doesnt have internet connection for example rapileech doesnt work it says "cannot connect via port 80" and if i put an rss feed collector in a website it doesnt work but everything else works fine , also when i put the same file in a shared web host it works fine
I've just upgraded my serv from fedora8 to fedora12 and got a problem. The httpd and vsftpd add a junk in the beginning of html files. Png, tar and other files are ok. When I make a request to localhost everything is ok.
Code: #telnet localhost 80 GET /1.html <html> </html> but from any other computer.
Code: ..... But this is not an apache problem. When I dl html files from ftp I got the same problem. Iptables is swithed off.
got my server up, installed FTP and all those goodies. And then i got some fun. Index.HTML shows perfectly. But when i place an Index.PHP, i get nothing at all.I get this error actuallyServer error.The website encountered an errorretrieving http://192.168.1.102/. It may be down for maintenance or configured incorrectly.Here are some suggestions:Reload this web page later. More information on this error
I have a ubuntu 8.04 server running apache2 and would like to allow a CGI script to be executed when visitors come to my site.The purpose of this is to determine which browser the visitor is using and redirect them to the relevant version of the site.
My apache ignores index files (index.php ,index.html ,index.htm , ...) and while these files exists in directory apache lists directory content!I mean http://localhost/test/ lists directory content instead of showing index.php!
